| .. |
|
arjun
|
Remove 'support_interface_skip_height' setting.
|
2024-01-10 08:55:56 +01:00 |
|
artillery
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
atmat
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
biqu
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
blocks
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
cartesio
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
crazy3dprint
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
creality
|
Applied printer-linter format
|
2024-03-01 10:18:21 +00:00 |
|
dagoma
|
Applied printer-linter format
|
2024-03-01 14:31:28 +00:00 |
|
deltacomb
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
diy
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
dxu
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
elegoo
|
EN4 add Neptune 4 Plus and Max variants
|
2023-12-09 16:58:24 +01:00 |
|
fabtotum
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
farm2
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
felix
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
flashforge
|
Applied printer-linter format
|
2024-01-31 12:38:21 +00:00 |
|
flyingbear
|
Applied printer-linter format
|
2023-11-29 12:04:33 +00:00 |
|
fusion3
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
geeetech_variants
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
gmax
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
goofoo
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
hms434
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
imade3d
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
kingroon
|
Added missing extruder variants
|
2023-08-18 10:40:01 +03:00 |
|
kosher
|
Remove 'support_interface_skip_height' setting.
|
2024-01-10 08:55:56 +01:00 |
|
leapfrog
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
liquid
|
Revert "Change prime_tower_enable to prime_tower_mode in all defs/profiles"
|
2024-02-22 16:20:39 +01:00 |
|
lnl3d
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
longer
|
Bump-up settings version to 22
|
2023-04-17 14:06:52 +02:00 |
|
mark2
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
mingda
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
modix
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
multicomp
|
add new machine Multicomp MCPI 200
|
2023-10-24 15:43:18 +08:00 |
|
nwa3d
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
ratrig
|
Applied printer-linter format
|
2024-01-31 12:46:58 +00:00 |
|
renkforce
|
add renkforce 10+ 0.2 nozzle profile
|
2023-10-16 10:03:41 +08:00 |
|
sovol
|
Add SV06 Plus profile based on Sovol profile, Update SV06 profile with updates
|
2023-04-09 09:44:53 -07:00 |
|
strateo3d
|
Revert "Change prime_tower_enable to prime_tower_mode in all defs/profiles"
|
2024-02-22 16:20:39 +01:00 |
|
structur3d
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
tizyx
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
tronxy
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
two_trees
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
uni
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
vivedino
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
voron
|
Applied printer-linter format
|
2023-08-01 11:54:38 +00:00 |
|
vzbot
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
weedo
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
xyz_printing
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
zav
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
ultimaker2_extended_olsson_0.4.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
ultimaker2_extended_olsson_0.6.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
ultimaker2_extended_olsson_0.8.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
ultimaker2_extended_olsson_0.25.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
ultimaker2_extended_plus_0.4.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
ultimaker2_extended_plus_0.6.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
ultimaker2_extended_plus_0.8.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
ultimaker2_extended_plus_0.25.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
ultimaker2_olsson_0.4.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
ultimaker2_olsson_0.6.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
ultimaker2_olsson_0.8.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
ultimaker2_olsson_0.25.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
ultimaker2_plus_0.4.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
ultimaker2_plus_0.6.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
ultimaker2_plus_0.8.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
ultimaker2_plus_0.25.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
ultimaker2_plus_connect_0.4.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
ultimaker2_plus_connect_0.6.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
ultimaker2_plus_connect_0.8.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
ultimaker2_plus_connect_0.25.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
ultimaker3_aa0.8.inst.cfg
|
Revert "Change prime_tower_enable to prime_tower_mode in all defs/profiles"
|
2024-02-22 16:20:39 +01:00 |
|
ultimaker3_aa0.25.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
ultimaker3_aa04.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
ultimaker3_bb0.8.inst.cfg
|
Revert "Change prime_tower_enable to prime_tower_mode in all defs/profiles"
|
2024-02-22 16:20:39 +01:00 |
|
ultimaker3_bb04.inst.cfg
|
Removed the reduced print speed for the bottom interface layers of the BB cores (effectively for PVA).
|
2023-04-14 09:52:43 +02:00 |
|
ultimaker3_extended_aa0.8.inst.cfg
|
Revert "Change prime_tower_enable to prime_tower_mode in all defs/profiles"
|
2024-02-22 16:20:39 +01:00 |
|
ultimaker3_extended_aa0.25.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
ultimaker3_extended_aa04.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
ultimaker3_extended_bb0.8.inst.cfg
|
Revert "Change prime_tower_enable to prime_tower_mode in all defs/profiles"
|
2024-02-22 16:20:39 +01:00 |
|
ultimaker3_extended_bb04.inst.cfg
|
Removed the reduced print speed for the bottom interface layers of the BB cores (effectively for PVA).
|
2023-04-14 09:52:43 +02:00 |
|
ultimaker_methodx_1C.inst.cfg
|
Applied printer-linter format
|
2023-11-29 11:26:50 +00:00 |
|
ultimaker_methodx_1XA.inst.cfg
|
Applied printer-linter format
|
2023-11-29 11:26:50 +00:00 |
|
ultimaker_methodx_2XA.inst.cfg
|
Applied printer-linter format
|
2023-11-29 11:26:50 +00:00 |
|
ultimaker_methodx_LABS.inst.cfg
|
Applied printer-linter format
|
2023-11-29 11:26:50 +00:00 |
|
ultimaker_methodxl_1C.inst.cfg
|
Applied printer-linter format
|
2023-11-29 11:26:50 +00:00 |
|
ultimaker_methodxl_1XA.inst.cfg
|
Applied printer-linter format
|
2023-11-29 11:26:50 +00:00 |
|
ultimaker_methodxl_2XA.inst.cfg
|
Applied printer-linter format
|
2023-11-29 11:26:50 +00:00 |
|
ultimaker_methodxl_LABS.inst.cfg
|
Applied printer-linter format
|
2023-11-29 11:26:50 +00:00 |
|
ultimaker_s3_aa0.8.inst.cfg
|
Revert "Change prime_tower_enable to prime_tower_mode in all defs/profiles"
|
2024-02-22 16:20:39 +01:00 |
|
ultimaker_s3_aa0.25.inst.cfg
|
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
2024-02-08 16:20:02 +01:00 |
|
ultimaker_s3_aa04.inst.cfg
|
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
2024-02-08 16:20:02 +01:00 |
|
ultimaker_s3_bb0.8.inst.cfg
|
Revert "Change prime_tower_enable to prime_tower_mode in all defs/profiles"
|
2024-02-22 16:20:39 +01:00 |
|
ultimaker_s3_bb04.inst.cfg
|
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
2024-02-08 16:20:02 +01:00 |
|
ultimaker_s3_cc04.inst.cfg
|
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
2024-02-08 16:20:02 +01:00 |
|
ultimaker_s3_cc06.inst.cfg
|
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
2024-02-08 16:20:02 +01:00 |
|
ultimaker_s3_dd04.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
ultimaker_s5_aa0.8.inst.cfg
|
Revert "Change prime_tower_enable to prime_tower_mode in all defs/profiles"
|
2024-02-22 16:20:39 +01:00 |
|
ultimaker_s5_aa0.25.inst.cfg
|
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
2024-02-08 16:20:02 +01:00 |
|
ultimaker_s5_aa04.inst.cfg
|
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
2024-02-08 16:20:02 +01:00 |
|
ultimaker_s5_aluminum.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
ultimaker_s5_bb0.8.inst.cfg
|
Revert "Change prime_tower_enable to prime_tower_mode in all defs/profiles"
|
2024-02-22 16:20:39 +01:00 |
|
ultimaker_s5_bb04.inst.cfg
|
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
2024-02-08 16:20:02 +01:00 |
|
ultimaker_s5_cc04.inst.cfg
|
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
2024-02-08 16:20:02 +01:00 |
|
ultimaker_s5_cc06.inst.cfg
|
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
2024-02-08 16:20:02 +01:00 |
|
ultimaker_s5_dd04.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
ultimaker_s5_glass.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
|
ultimaker_s7_aa0.8.inst.cfg
|
Revert "Change prime_tower_enable to prime_tower_mode in all defs/profiles"
|
2024-02-22 16:20:39 +01:00 |
|
ultimaker_s7_aa0.25.inst.cfg
|
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
2024-02-08 16:20:02 +01:00 |
|
ultimaker_s7_aa04.inst.cfg
|
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
2024-02-08 16:20:02 +01:00 |
|
ultimaker_s7_bb0.8.inst.cfg
|
Revert "Change prime_tower_enable to prime_tower_mode in all defs/profiles"
|
2024-02-22 16:20:39 +01:00 |
|
ultimaker_s7_bb04.inst.cfg
|
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
2024-02-08 16:20:02 +01:00 |
|
ultimaker_s7_cc04.inst.cfg
|
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
2024-02-08 16:20:02 +01:00 |
|
ultimaker_s7_cc06.inst.cfg
|
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
2024-02-08 16:20:02 +01:00 |
|
ultimaker_s7_dd04.inst.cfg
|
Bump up setting version to 22
|
2023-03-31 07:24:43 +02:00 |
