Revert "Change prime_tower_enable to prime_tower_mode in all defs/profiles"

This reverts commit 5a291f9ba9.

plugins/LegacyProfileReader/DictionaryOfDoom.json

@@ -68,7 +68,7 @@
         "meshfix_keep_open_polygons": "fix_horrible_use_open_bits",
         "magic_mesh_surface_mode": "\"surface\" if simple_mode else \"normal\"",
         "magic_spiralize": "spiralize",
-        "prime_tower_mode": "\"normal\" if wipe_tower else \"none\"",
+        "prime_tower_enable": "wipe_tower",
         "prime_tower_size": "math.sqrt(float(wipe_tower_volume) / float(layer_height))",
         "ooze_shield_enabled": "ooze_shield",
         "skin_overlap": "fill_overlap"

resources/definitions/atmat_signal_pro_base.def.json

@@ -110,7 +110,7 @@
         "min_infill_area": { "value": "5.0" },
         "minimum_polygon_circumference": { "value": "0.2" },
         "optimize_wall_printing_order": { "value": "True" },
-        "prime_tower_mode": { "value": "'normal'" },
+        "prime_tower_enable": { "value": "True" },
         "retraction_amount": { "value": "1" },
         "retraction_combing": { "value": "'noskin'" },
         "retraction_combing_max_distance": { "value": "10" },

resources/definitions/deltacomb_dc20flux.def.json

@@ -31,8 +31,8 @@
         "material_final_print_temperature": { "value": "material_print_temperature" },
         "material_initial_print_temperature": { "value": "material_print_temperature" },
         "material_standby_temperature": { "value": "material_print_temperature" },
+        "prime_tower_enable": { "value": true },
         "prime_tower_min_volume": { "value": "50" },
-        "prime_tower_mode": { "value": "'normal'" },
         "switch_extruder_retraction_amount": { "value": "0" }
     }
 }

resources/definitions/deltacomb_dc21flux.def.json

@@ -31,8 +31,8 @@
         "material_final_print_temperature": { "value": "material_print_temperature" },
         "material_initial_print_temperature": { "value": "material_print_temperature" },
         "material_standby_temperature": { "value": "material_print_temperature" },
+        "prime_tower_enable": { "value": true },
         "prime_tower_min_volume": { "value": "50" },
-        "prime_tower_mode": { "value": "'normal'" },
         "switch_extruder_retraction_amount": { "value": "0" }
     }
 }

resources/definitions/deltacomb_dc30flux.def.json

@@ -31,8 +31,8 @@
         "material_final_print_temperature": { "value": "material_print_temperature" },
         "material_initial_print_temperature": { "value": "material_print_temperature" },
         "material_standby_temperature": { "value": "material_print_temperature" },
+        "prime_tower_enable": { "value": "True" },
         "prime_tower_min_volume": { "value": "50" },
-        "prime_tower_mode": { "value": "'normal'" },
         "switch_extruder_retraction_amount": { "value": "0" }
     }
 }

resources/definitions/dxu_dual.def.json

@@ -5,6 +5,7 @@
     "overrides":
     {
         "machine_end_gcode": { "value": "\"\"  if machine_gcode_flavor == \"UltiGCode\" else \"G90 ;absolute positioning\\nM104 S0 T0 ;extruder heater off\\nM104 S0 T1\\nM140 S0 ;turn off bed\\nT0 ; move to the first head\\nM107 ;fan off\"" },
-        "machine_start_gcode": { "value": "\"\"  if machine_gcode_flavor == \"UltiGCode\" else \";material_bed_temperature={material_bed_temperature} material_print_temperature={material_print_temperature} material_print_temperature_layer_0={material_print_temperature_layer_0}\\nM190 S{material_bed_temperature_layer_0}\\nM104 T0 S{material_standby_temperature, 0}\\nM104 T0 S{material_print_temperature_layer_0, 0}\\nG21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nM200 D0 T0 ;reset filament diameter\\nM200 D0 T1\\nG28 ;home all\\nT1 ; move to the nozzle 2\\nG0 Z20 F2400 ;move the platform to 30mm\\nM109 T1 S{material_print_temperature_layer_0, 1}\\nG0 X210 Y20 F7200\\nG92 E0\\nG92 E-7.0 ;prime distance\\nG1 E0 F45 ;purge nozzle\\nG1 E-6.5 F1500 ; retract\\nT0 ; move to the nozzle 1\\nM104 T1 S{material_standby_temperature, 1}\\nG0 Z20 F2400\\nM109 T0 S{material_print_temperature_layer_0, 0}\\nG0 X210 Y20 F7200\\nG92 E0\\nG92 E-7.0\\nG1 E0 F45 ;purge nozzle\\nG1 E-6.5 F1500\\nM104 T0 S{material_standby_temperature, 0}\\nT{initial_extruder_nr} ;switch to the first nozzle used for print\\nM109 T{initial_extruder_nr} S{material_print_temperature_layer_0, initial_extruder_nr}\\nM400 ;finish all moves\\nG1 E0 F1500\\nG92 E0\\n;end of startup sequence\\n\"" }
+        "machine_start_gcode": { "value": "\"\"  if machine_gcode_flavor == \"UltiGCode\" else \";material_bed_temperature={material_bed_temperature} material_print_temperature={material_print_temperature} material_print_temperature_layer_0={material_print_temperature_layer_0}\\nM190 S{material_bed_temperature_layer_0}\\nM104 T0 S{material_standby_temperature, 0}\\nM104 T0 S{material_print_temperature_layer_0, 0}\\nG21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nM200 D0 T0 ;reset filament diameter\\nM200 D0 T1\\nG28 ;home all\\nT1 ; move to the nozzle 2\\nG0 Z20 F2400 ;move the platform to 30mm\\nM109 T1 S{material_print_temperature_layer_0, 1}\\nG0 X210 Y20 F7200\\nG92 E0\\nG92 E-7.0 ;prime distance\\nG1 E0 F45 ;purge nozzle\\nG1 E-6.5 F1500 ; retract\\nT0 ; move to the nozzle 1\\nM104 T1 S{material_standby_temperature, 1}\\nG0 Z20 F2400\\nM109 T0 S{material_print_temperature_layer_0, 0}\\nG0 X210 Y20 F7200\\nG92 E0\\nG92 E-7.0\\nG1 E0 F45 ;purge nozzle\\nG1 E-6.5 F1500\\nM104 T0 S{material_standby_temperature, 0}\\nT{initial_extruder_nr} ;switch to the first nozzle used for print\\nM109 T{initial_extruder_nr} S{material_print_temperature_layer_0, initial_extruder_nr}\\nM400 ;finish all moves\\nG1 E0 F1500\\nG92 E0\\n;end of startup sequence\\n\"" },
+        "prime_tower_enable": { "default_value": true }
     }
 }

resources/definitions/elegoo_neptune_2D.def.json

@@ -55,6 +55,7 @@
             "settable_per_extruder": false
         },
         "prime_blob_enable": { "default_value": false },
+        "prime_tower_enable": { "default_value": true },
         "prime_tower_min_volume": { "default_value": 90 },
         "prime_tower_size": { "default_value": 30 },
         "raft_airgap": { "default_value": 0.25 },

resources/definitions/leapfrog_bolt_pro.def.json

@@ -80,7 +80,7 @@
         "material_final_print_temperature": { "value": "default_material_print_temperature" },
         "material_initial_print_temperature": { "value": "default_material_print_temperature" },
         "material_standby_temperature": { "enabled": false },
-        "prime_tower_mode": { "resolve": "'normal' if extruders_enabled_count > 1 else 'none'" },
+        "prime_tower_enable": { "resolve": "extruders_enabled_count > 1" },
         "retraction_amount": { "default_value": 2 },
         "retraction_combing": { "value": "'all'" },
         "skirt_line_count": { "default_value": 3 },

resources/definitions/lotmaxx_sc60.def.json

@@ -44,8 +44,8 @@
         "machine_width": { "default_value": 235 },
         "meshfix_maximum_resolution": { "value": 0.25 },
         "optimize_wall_printing_order": { "value": true },
+        "prime_tower_enable": { "value": true },
         "prime_tower_min_volume": { "value": 30 },
-        "prime_tower_mode": { "value": "'normal'" },
         "retract_at_layer_change": { "value": false },
         "retraction_amount": { "value": 4.5 },
         "roofing_layer_count": { "value": 1 },

resources/definitions/strateo3d_IDEX420.def.json

@@ -112,6 +112,7 @@
         "machine_use_extruder_offset_to_offset_coords": { "default_value": false },
         "machine_width": { "default_value": 420 },
         "material_diameter": { "default_value": 1.75 },
+        "prime_tower_enable": { "default_value": true },
         "prime_tower_min_volume": { "default_value": 35.6 },
         "raft_acceleration": { "value": "machine_acceleration" },
         "raft_base_acceleration": { "value": "machine_acceleration" },

resources/definitions/ultimaker3.def.json

@@ -149,6 +149,7 @@
             "enabled": true,
             "value": "resolveOrValue('print_sequence') != 'one_at_a_time'"
         },
+        "prime_tower_enable": { "default_value": true },
         "prime_tower_position_x": { "value": "185" },
         "prime_tower_wipe_enabled": { "default_value": false },
         "retraction_amount": { "value": "6.5" },

resources/definitions/ultimaker_method_base.def.json

@@ -345,9 +345,9 @@
         "prime_tower_base_curve_magnitude": { "value": 2 },
         "prime_tower_base_height": { "value": 6 },
         "prime_tower_base_size": { "value": 10 },
+        "prime_tower_enable": { "value": false },
         "prime_tower_flow": { "value": "material_flow" },
         "prime_tower_line_width": { "value": 1 },
-        "prime_tower_mode": { "value": "none" },
         "prime_tower_raft_base_line_spacing": { "value": "raft_base_line_width" },
         "prime_tower_wipe_enabled": { "value": true },
         "print_sequence": { "enabled": false },

resources/definitions/ultimaker_s3.def.json

@@ -103,7 +103,7 @@
             "default_value": false,
             "enabled": true
         },
-        "prime_tower_mode": { "value": "'normal'" },
+        "prime_tower_enable": { "value": "True" },
         "retraction_amount": { "value": "6.5" },
         "retraction_hop": { "value": "2" },
         "retraction_hop_enabled": { "value": "extruders_enabled_count > 1" },

resources/definitions/ultimaker_s5.def.json

@@ -104,7 +104,7 @@
             "default_value": false,
             "enabled": true
         },
-        "prime_tower_mode": { "value": "'normal'" },
+        "prime_tower_enable": { "value": "True" },
         "retraction_amount": { "value": "6.5" },
         "retraction_combing": { "value": "'no_outer_surfaces'" },
         "retraction_hop": { "value": "2" },

resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg

@@ -38,8 +38,8 @@ line_width = 0.4
 min_infill_area = 0
 optimize_wall_printing_order = True
 prime_tower_brim_enable = True
+prime_tower_enable = True
 prime_tower_min_volume = 6
-prime_tower_mode = normal
 prime_tower_size = 20
 prime_tower_wipe_enabled = True
 retract_at_layer_change = False

resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg

@@ -38,8 +38,8 @@ line_width = 0.4
 min_infill_area = 0
 optimize_wall_printing_order = True
 prime_tower_brim_enable = True
+prime_tower_enable = True
 prime_tower_min_volume = 6
-prime_tower_mode = normal
 prime_tower_size = 20
 prime_tower_wipe_enabled = True
 retract_at_layer_change = False

resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg

@@ -36,8 +36,8 @@ line_width = 0.4
 min_infill_area = 0
 optimize_wall_printing_order = True
 prime_tower_brim_enable = True
+prime_tower_enable = True
 prime_tower_min_volume = 6
-prime_tower_mode = normal
 prime_tower_size = 20
 prime_tower_wipe_enabled = True
 retract_at_layer_change = False

resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg

@@ -36,8 +36,8 @@ line_width = 0.4
 min_infill_area = 0
 optimize_wall_printing_order = True
 prime_tower_brim_enable = True
+prime_tower_enable = True
 prime_tower_min_volume = 6
-prime_tower_mode = normal
 prime_tower_size = 20
 prime_tower_wipe_enabled = True
 retract_at_layer_change = False

resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg

@@ -35,8 +35,8 @@ line_width = 0.4
 min_infill_area = 0
 optimize_wall_printing_order = True
 prime_tower_brim_enable = True
+prime_tower_enable = True
 prime_tower_min_volume = 6
-prime_tower_mode = normal
 prime_tower_size = 20
 prime_tower_wipe_enabled = True
 retract_at_layer_change = False

resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg

@@ -35,8 +35,8 @@ line_width = 0.4
 min_infill_area = 0
 optimize_wall_printing_order = True
 prime_tower_brim_enable = True
+prime_tower_enable = True
 prime_tower_min_volume = 6
-prime_tower_mode = normal
 prime_tower_size = 20
 prime_tower_wipe_enabled = True
 retract_at_layer_change = False

resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_A.inst.cfg

@@ -13,7 +13,7 @@ variant = DBE 0.40mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0

resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_B.inst.cfg

@@ -13,7 +13,7 @@ variant = DBE 0.40mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0

resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_C.inst.cfg

@@ -13,7 +13,7 @@ variant = DBE 0.40mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0

resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_D.inst.cfg

@@ -13,7 +13,7 @@ variant = DBE 0.40mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0

resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_E.inst.cfg

@@ -13,7 +13,7 @@ variant = DBE 0.40mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0

resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_C.inst.cfg

@@ -13,7 +13,7 @@ variant = DBE 0.60mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0

resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_D.inst.cfg

@@ -13,7 +13,7 @@ variant = DBE 0.60mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0

resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_E.inst.cfg

@@ -13,7 +13,7 @@ variant = DBE 0.60mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0

resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_F.inst.cfg

@@ -13,7 +13,7 @@ variant = DBE 0.60mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0

resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_A.inst.cfg

@@ -13,7 +13,7 @@ variant = FBE 0.40mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0

resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_B.inst.cfg

@@ -13,7 +13,7 @@ variant = FBE 0.40mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0

resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_C.inst.cfg

@@ -13,7 +13,7 @@ variant = FBE 0.40mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0

resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_D.inst.cfg

@@ -13,7 +13,7 @@ variant = FBE 0.40mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0

resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_E.inst.cfg

@@ -13,7 +13,7 @@ variant = FBE 0.40mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0

resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_C.inst.cfg

@@ -13,7 +13,7 @@ variant = FBE 0.60mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0

resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_D.inst.cfg

@@ -13,7 +13,7 @@ variant = FBE 0.60mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0

resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_E.inst.cfg

@@ -13,7 +13,7 @@ variant = FBE 0.60mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0

resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_F.inst.cfg

@@ -13,7 +13,7 @@ variant = FBE 0.60mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0

resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_D.inst.cfg

@@ -13,7 +13,7 @@ variant = V-DBE 0.80mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0

resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_E.inst.cfg

@@ -13,7 +13,7 @@ variant = V-DBE 0.80mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0

resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_F.inst.cfg

@@ -13,7 +13,7 @@ variant = V-DBE 0.80mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0

resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_G.inst.cfg

@@ -13,7 +13,7 @@ variant = V-DBE 0.80mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0

resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_D.inst.cfg

@@ -13,7 +13,7 @@ variant = V-FBE 0.80mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0

resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_E.inst.cfg

@@ -13,7 +13,7 @@ variant = V-FBE 0.60mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0

resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_F.inst.cfg

@@ -13,7 +13,7 @@ variant = V-FBE 0.80mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0

resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_G.inst.cfg

@@ -13,7 +13,7 @@ variant = V-FBE 0.80mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0

resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.10.inst.cfg

@@ -13,7 +13,7 @@ variant = 0.40mm_Elegoo_Nozzle
 [values]
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-prime_tower_mode = none
+prime_tower_enable = False
 raft_airgap = 0.25
 retraction_prime_speed = =retraction_speed
 skin_overlap = 10

resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.15.inst.cfg

@@ -13,7 +13,7 @@ variant = 0.40mm_Elegoo_Nozzle
 [values]
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-prime_tower_mode = none
+prime_tower_enable = False
 raft_airgap = 0.25
 retraction_prime_speed = =retraction_speed
 speed_print = 70

resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.20.inst.cfg

@@ -17,7 +17,7 @@ infill_sparse_density = 15
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5
-prime_tower_mode = none
+prime_tower_enable = False
 raft_airgap = 0.25
 retraction_prime_speed = =retraction_speed
 skin_overlap = 20

resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.30.inst.cfg

@@ -20,7 +20,7 @@ infill_sparse_density = 15
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_mode = none
+prime_tower_enable = False
 raft_airgap = 0.25
 retraction_prime_speed = =retraction_speed
 skin_overlap = 20

resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.30.inst.cfg

@@ -15,7 +15,7 @@ gradual_infill_step_height = =3 * layer_height
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_mode = normal
+prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)

resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.40.inst.cfg

@@ -15,7 +15,7 @@ gradual_infill_step_height = =3 * layer_height
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 15
-prime_tower_mode = normal
+prime_tower_enable = True
 speed_infill = =math.ceil(speed_print * 35 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)

resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.60.inst.cfg

@@ -15,7 +15,7 @@ gradual_infill_step_height = =3 * layer_height
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 15
-prime_tower_mode = normal
+prime_tower_enable = True
 speed_infill = =math.ceil(speed_print * 35 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)

resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.10.inst.cfg

@@ -11,7 +11,7 @@ type = quality
 variant = 0.40mm_Elegoo_Nozzle
 
 [values]
-prime_tower_mode = none
+prime_tower_enable = False
 raft_airgap = 0.25
 skin_overlap = 10
 speed_topbottom = =math.ceil(speed_print * 35 / 70)

resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.15.inst.cfg

@@ -11,7 +11,7 @@ type = quality
 variant = 0.40mm_Elegoo_Nozzle
 
 [values]
-prime_tower_mode = none
+prime_tower_enable = False
 raft_airgap = 0.25
 speed_topbottom = =math.ceil(speed_print * 35 / 70)
 speed_wall = =math.ceil(speed_print * 45 / 70)

resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.20.inst.cfg

@@ -12,7 +12,7 @@ variant = 0.40mm_Elegoo_Nozzle
 
 [values]
 infill_sparse_density = 15
-prime_tower_mode = none
+prime_tower_enable = False
 raft_airgap = 0.25
 skin_overlap = 20
 top_bottom_thickness = 0.8

resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.30.inst.cfg

@@ -14,7 +14,7 @@ variant = 0.40mm_Elegoo_Nozzle
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_sparse_density = 15
 material_print_temperature = =default_material_print_temperature + 5
-prime_tower_mode = none
+prime_tower_enable = False
 raft_airgap = 0.25
 skin_overlap = 20
 top_bottom_thickness = 0.9

resources/quality/gmax15plus/gmax15plus_global_dual_normal.inst.cfg

@@ -30,7 +30,7 @@ material_standby_temperature = =material_print_temperature - 10
 ooze_shield_angle = 20
 ooze_shield_dist = 4
 ooze_shield_enabled = True
-prime_tower_mode = none
+prime_tower_enable = False
 retraction_amount = 0.75
 retraction_combing = off
 retraction_speed = 70

resources/quality/gmax15plus/gmax15plus_global_dual_thick.inst.cfg

@@ -30,7 +30,7 @@ material_standby_temperature = =material_print_temperature - 10
 ooze_shield_angle = 20
 ooze_shield_dist = 4
 ooze_shield_enabled = True
-prime_tower_mode = none
+prime_tower_enable = False
 retraction_amount = 0.75
 retraction_combing = off
 retraction_speed = 70

resources/quality/gmax15plus/gmax15plus_global_dual_thin.inst.cfg

@@ -30,7 +30,7 @@ material_standby_temperature = =material_print_temperature - 10
 ooze_shield_angle = 20
 ooze_shield_dist = 4
 ooze_shield_enabled = True
-prime_tower_mode = none
+prime_tower_enable = False
 retraction_amount = 0.75
 retraction_combing = off
 retraction_speed = 70

resources/quality/gmax15plus/gmax15plus_global_dual_very_thick.inst.cfg

@@ -29,7 +29,7 @@ material_standby_temperature = =material_print_temperature - 10
 ooze_shield_angle = 20
 ooze_shield_dist = 4
 ooze_shield_enabled = True
-prime_tower_mode = none
+prime_tower_enable = False
 retraction_amount = 0.75
 retraction_combing = off
 retraction_speed = 70

resources/quality/liquid/liquid_vo0.4_ABS_Draft_Print.inst.cfg

@@ -18,7 +18,7 @@ machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 20
 material_initial_print_temperature = =material_print_temperature - 15
 material_print_temperature = =default_material_print_temperature + 20
-prime_tower_mode = none
+prime_tower_enable = False
 skin_overlap = 20
 speed_infill = =math.ceil(speed_print * 50 / 60)
 speed_layer_0 = =math.ceil(speed_print * 20 / 60)

resources/quality/liquid/liquid_vo0.4_ABS_Fast_Print.inst.cfg

@@ -19,7 +19,7 @@ machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 20
 material_initial_print_temperature = =material_print_temperature - 15
 material_print_temperature = =default_material_print_temperature + 15
-prime_tower_mode = none
+prime_tower_enable = False
 speed_infill = =math.ceil(speed_print * 45 / 60)
 speed_layer_0 = =math.ceil(speed_print * 20 / 60)
 speed_print = 60

resources/quality/liquid/liquid_vo0.4_ABS_High_Quality.inst.cfg

@@ -19,7 +19,7 @@ machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 20
 material_initial_print_temperature = =material_print_temperature - 15
 material_print_temperature = =default_material_print_temperature + 5
-prime_tower_mode = none
+prime_tower_enable = False
 speed_infill = =math.ceil(speed_print * 40 / 50)
 speed_layer_0 = =math.ceil(speed_print * 20 / 50)
 speed_print = 50

resources/quality/liquid/liquid_vo0.4_ABS_Normal_Quality.inst.cfg

@@ -18,7 +18,7 @@ machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 20
 material_initial_print_temperature = =material_print_temperature - 15
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_mode = none
+prime_tower_enable = False
 speed_infill = =math.ceil(speed_print * 40 / 55)
 speed_layer_0 = =math.ceil(speed_print * 20 / 55)
 speed_print = 55

resources/quality/liquid/liquid_vo0.4_PC_Draft_Print.inst.cfg

@@ -36,7 +36,7 @@ material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
-prime_tower_mode = normal
+prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)

resources/quality/liquid/liquid_vo0.4_PC_Fast_Print.inst.cfg

@@ -35,7 +35,7 @@ material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
-prime_tower_mode = normal
+prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)

resources/quality/liquid/liquid_vo0.4_PC_High_Quality.inst.cfg

@@ -36,7 +36,7 @@ material_print_temperature = =default_material_print_temperature - 10
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
-prime_tower_mode = normal
+prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)

resources/quality/liquid/liquid_vo0.4_PC_Normal_Quality.inst.cfg

@@ -34,7 +34,7 @@ material_initial_print_temperature = =material_print_temperature - 5
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
-prime_tower_mode = normal
+prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)

resources/quality/liquid/liquid_vo0.4_PETG_Draft_Print.inst.cfg

@@ -24,7 +24,7 @@ machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 70)
 speed_print = 70

resources/quality/liquid/liquid_vo0.4_PETG_Fast_Print.inst.cfg

@@ -20,7 +20,7 @@ layer_height_0 = 0.2
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 speed_layer_0 = =math.ceil(speed_print * 20 / 60)
 speed_print = 60
 speed_topbottom = =math.ceil(speed_print * 35 / 60)

resources/quality/liquid/liquid_vo0.4_PETG_High_Quality.inst.cfg

@@ -22,7 +22,7 @@ machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 5
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 skin_overlap = 10
 speed_layer_0 = =math.ceil(speed_print * 20 / 50)
 speed_print = 50

resources/quality/liquid/liquid_vo0.4_PETG_Normal_Quality.inst.cfg

@@ -21,7 +21,7 @@ layer_height_0 = 0.2
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 skin_overlap = 10
 speed_layer_0 = =math.ceil(speed_print * 20 / 70)
 top_bottom_thickness = 1

resources/quality/liquid/liquid_vo0.4_PLA_Draft_Print.inst.cfg

@@ -24,7 +24,7 @@ machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 70)
 speed_print = 70

resources/quality/liquid/liquid_vo0.4_PLA_Fast_Print.inst.cfg

@@ -20,7 +20,7 @@ layer_height_0 = 0.2
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 speed_layer_0 = =math.ceil(speed_print * 20 / 60)
 speed_print = 60
 speed_topbottom = =math.ceil(speed_print * 35 / 60)

resources/quality/liquid/liquid_vo0.4_PLA_High_Quality.inst.cfg

@@ -22,7 +22,7 @@ machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 5
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 skin_overlap = 10
 speed_layer_0 = =math.ceil(speed_print * 20 / 50)
 speed_print = 50

resources/quality/liquid/liquid_vo0.4_PLA_Normal_Quality.inst.cfg

@@ -21,7 +21,7 @@ layer_height_0 = 0.2
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
-prime_tower_mode = none
+prime_tower_enable = False
 skin_overlap = 10
 speed_layer_0 = =math.ceil(speed_print * 20 / 70)
 top_bottom_thickness = 1

resources/quality/liquid/liquid_vo0.4_PP_Draft_Print.inst.cfg

@@ -36,7 +36,7 @@ material_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =material_print_temperature + 5
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
-prime_tower_mode = none
+prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
 retraction_count_max = 12

resources/quality/liquid/liquid_vo0.4_PP_Fast_Print.inst.cfg

@@ -36,7 +36,7 @@ material_print_temperature = =default_material_print_temperature - 13
 material_print_temperature_layer_0 = =material_print_temperature + 3
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
-prime_tower_mode = none
+prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
 retraction_count_max = 12

resources/quality/liquid/liquid_vo0.4_PP_Normal_Quality.inst.cfg

@@ -36,7 +36,7 @@ material_print_temperature = =default_material_print_temperature - 15
 material_print_temperature_layer_0 = =material_print_temperature + 3
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
-prime_tower_mode = none
+prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
 retraction_count_max = 12

resources/quality/liquid/liquid_vo0.6_PETG_Draft_Print.inst.cfg

@@ -26,7 +26,7 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
-prime_tower_mode = normal
+prime_tower_enable = True
 retract_at_layer_change = False
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)

resources/quality/liquid/liquid_vo0.6_PETG_Fast_Print.inst.cfg

@@ -26,7 +26,7 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
-prime_tower_mode = normal
+prime_tower_enable = True
 retract_at_layer_change = False
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)

resources/quality/liquid/liquid_vo0.6_PLA_Draft_Print.inst.cfg

@@ -26,7 +26,7 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
-prime_tower_mode = normal
+prime_tower_enable = True
 retract_at_layer_change = False
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)

resources/quality/liquid/liquid_vo0.6_PLA_Fast_Print.inst.cfg

@@ -26,7 +26,7 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
-prime_tower_mode = normal
+prime_tower_enable = True
 retract_at_layer_change = False
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)

resources/quality/liquid/liquid_vo0.8_CPE_Draft_Print.inst.cfg

@@ -17,7 +17,7 @@ jerk_travel = 20
 line_width = =machine_nozzle_size * 0.875
 material_print_temperature = =default_material_print_temperature + 15
 material_standby_temperature = 100
-prime_tower_mode = normal
+prime_tower_enable = True
 retraction_combing_max_distance = 50
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)

resources/quality/liquid/liquid_vo0.8_CPE_Superdraft_Print.inst.cfg

@@ -17,7 +17,7 @@ jerk_travel = 20
 line_width = =machine_nozzle_size * 0.875
 material_print_temperature = =default_material_print_temperature + 20
 material_standby_temperature = 100
-prime_tower_mode = normal
+prime_tower_enable = True
 retraction_combing_max_distance = 50
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 30 / 45)

resources/quality/liquid/liquid_vo0.8_CPE_Verydraft_Print.inst.cfg

@@ -17,7 +17,7 @@ jerk_travel = 20
 line_width = =machine_nozzle_size * 0.875
 material_print_temperature = =default_material_print_temperature + 17
 material_standby_temperature = 100
-prime_tower_mode = normal
+prime_tower_enable = True
 retraction_combing_max_distance = 50
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)

resources/quality/liquid/liquid_vo0.8_Nylon_Draft_Print.inst.cfg

@@ -21,7 +21,7 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_standby_temperature = 100
 ooze_shield_angle = 40
-prime_tower_mode = normal
+prime_tower_enable = True
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)

resources/quality/liquid/liquid_vo0.8_Nylon_Superdraft_Print.inst.cfg

@@ -21,7 +21,7 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_standby_temperature = 100
 ooze_shield_angle = 40
-prime_tower_mode = normal
+prime_tower_enable = True
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)

resources/quality/liquid/liquid_vo0.8_Nylon_Verydraft_Print.inst.cfg

@@ -21,7 +21,7 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_standby_temperature = 100
 ooze_shield_angle = 40
-prime_tower_mode = normal
+prime_tower_enable = True
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)

resources/quality/liquid/liquid_vo0.8_PETG_Draft_Print.inst.cfg

@@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_mode = normal
+prime_tower_enable = True
 retract_at_layer_change = False
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)

resources/quality/liquid/liquid_vo0.8_PETG_Superdraft_Print.inst.cfg

@@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 15
-prime_tower_mode = normal
+prime_tower_enable = True
 raft_margin = 10
 retract_at_layer_change = False
 speed_print = 45

resources/quality/liquid/liquid_vo0.8_PETG_Verydraft_Print.inst.cfg

@@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_mode = normal
+prime_tower_enable = True
 retract_at_layer_change = False
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)

resources/quality/liquid/liquid_vo0.8_PLA_Draft_Print.inst.cfg

@@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_mode = normal
+prime_tower_enable = True
 retract_at_layer_change = False
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)

resources/quality/liquid/liquid_vo0.8_PLA_Superdraft_Print.inst.cfg

@@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 15
-prime_tower_mode = normal
+prime_tower_enable = True
 raft_margin = 10
 retract_at_layer_change = False
 speed_print = 45

resources/quality/liquid/liquid_vo0.8_PLA_Verydraft_Print.inst.cfg

@@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_mode = normal
+prime_tower_enable = True
 retract_at_layer_change = False
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)

resources/quality/liquid/liquid_vo0.8_PP_Draft_Print.inst.cfg

@@ -26,9 +26,9 @@ material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
 material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
+prime_tower_enable = True
 prime_tower_flow = 100
 prime_tower_min_volume = 10
-prime_tower_mode = normal
 retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5

resources/quality/liquid/liquid_vo0.8_PP_Superdraft_Print.inst.cfg

@@ -26,9 +26,9 @@ material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
 material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
+prime_tower_enable = True
 prime_tower_flow = 100
 prime_tower_min_volume = 20
-prime_tower_mode = normal
 retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5

resources/quality/liquid/liquid_vo0.8_PP_Verydraft_Print.inst.cfg

@@ -25,9 +25,9 @@ material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
 material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
+prime_tower_enable = True
 prime_tower_flow = 100
 prime_tower_min_volume = 15
-prime_tower_mode = normal
 retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5

resources/quality/liquid/liquid_vo0.8_TPU_Draft_Print.inst.cfg

@@ -30,8 +30,8 @@ material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =material_print_temperature + 19
 material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
+prime_tower_enable = True
 prime_tower_flow = 100
-prime_tower_mode = normal
 retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5