Thomas Rahm
536c95555e
Suggested profile changes: Ensure minimum support area is 0 for tree support to avoid 'No trees generated' bug report. Removed extra z heightfor Tree support as this should no longer be required with the new implementation
2023-03-29 06:50:30 +02:00
Joeydelarago
f9dcfb2268
Applied printer-linter format
2023-01-20 09:04:27 +00:00
Mehmet Sutaş
8b1ab32796
Rigid3D Definitions Update
2023-01-14 21:42:28 +03:00
jspijker
53d8e0c730
Applied printer-linter format
...
To make sure we have uniform diffs with our PR's
2022-12-30 22:05:41 +01:00
Jaime van Kessel
2c331604e8
Clean up a lot of duplicate settings from machine profiles
...
These were errors that were copy pasted from other definitions. So leaving them as is would
continue to decrease the quality of third party profiles.
2022-09-06 11:39:08 +02:00
Jaime van Kessel
9d12ee841b
Remove unneeded values from machine profiles
2022-09-06 10:21:21 +02:00
Jaime van Kessel
699a9c0530
Remove unneeded excluded materials
...
These machines are 1.75mm, so there is no need to add the UM materials as excluded
2022-09-06 10:13:45 +02:00
Remco Burema
6c08bbfc9d
Merge branch 'master' into libArachne_rebased
2021-07-16 08:49:46 +02:00
Jaime van Kessel
d0411a95fd
Fixed rigid3d zhop speed
2021-07-06 11:53:41 +02:00
Ghostkeeper
0b1d963d86
Perform version upgrade on newer profiles
...
Should've done this in the merge, but I just increased the setting_version for these.
I also removed a deleted setting from the advanced visibility. We don't have tests that ensure that these visibility presets are good. Lucky I found it then, with a Ctrl+Shift+F search.
2021-06-18 11:06:26 +02:00
Mehmet Sutaş
4e9704c546
Mucit2 Definition and Rigid3D Definition Updates
2021-02-12 01:50:26 +03:00
Ghostkeeper
ef7cfd846b
Change maximum resolution from 0.05mm to 0.25mm
...
This was found to be better in https://github.com/Ultimaker/Cura/issues/8321 due to changes to the simplification function.
Other printers are assumed to have a similar effect, or have their original value copied from Creality printers.
2020-11-03 11:48:07 +01:00
Kostas Karmas
3527e94b24
Remove references to support_tree_enable in 3rd-party printers
...
CURA-6711
2020-07-23 15:49:55 +02:00
Mehmet Sutas
a0f02897e4
Update Rigid3D Profiles
2020-02-16 18:02:04 +03:00
Mehmet Sutas
da0e84bdfc
Update Rigid3D Printer Profiles
2020-02-10 01:05:20 +03:00
