mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-07 05:53:59 -06:00
Perform version upgrade on newer profiles
Should've done this in the merge, but I just increased the setting_version for these. I also removed a deleted setting from the advanced visibility. We don't have tests that ensure that these visibility presets are good. Lucky I found it then, with a Ctrl+Shift+F search.
This commit is contained in:
Ghostkeeper
parent
611208368c
commit
0b1d963d86
20 changed files with 8 additions and 43 deletions
|
|
@ -78,7 +78,6 @@
|
|||
"material_initial_print_temperature": { "value": "material_print_temperature + 10" },
|
||||
"material_final_print_temperature": { "value": "material_print_temperature" },
|
||||
"material_flow": { "value": 100 },
|
||||
"travel_compensate_overlapping_walls_0_enabled": { "value": "False" },
|
||||
|
||||
"infill_sparse_density": { "value": 25 },
|
||||
"infill_before_walls": { "value": false },
|
||||
|
|
@ -91,21 +90,21 @@
|
|||
|
||||
"retraction_hop_enabled": { "value": true },
|
||||
"retraction_hop": { "value": 0.075 },
|
||||
"retraction_hop_only_when_collides": { "value": true },
|
||||
"retraction_hop_only_when_collides": { "value": true },
|
||||
|
||||
"retraction_combing": { "value": "'off'" },
|
||||
"retraction_combing_max_distance": { "value": 30 },
|
||||
"travel_avoid_other_parts": { "value": true },
|
||||
"travel_avoid_supports": { "value": true },
|
||||
"travel_retract_before_outer_wall": { "value": true },
|
||||
|
||||
"retraction_amount": { "value": 6 },
|
||||
|
||||
"retraction_amount": { "value": 6 },
|
||||
"retraction_enable": { "value": true },
|
||||
"retraction_min_travel": { "value": 1.5 },
|
||||
|
||||
"cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" },
|
||||
"cool_fan_speed": { "value": 70 },
|
||||
"cool_fan_speed_0": { "value": 30 },
|
||||
"cool_fan_speed": { "value": 70 },
|
||||
"cool_fan_speed_0": { "value": 30 },
|
||||
|
||||
"cool_fan_enabled": { "value": true },
|
||||
"cool_min_layer_time": { "value": 10 },
|
||||
|
|
@ -115,7 +114,6 @@
|
|||
"skirt_gap": { "value": 5.0 },
|
||||
"skirt_line_count": { "value": 4 },
|
||||
|
||||
|
||||
"support_angle": { "value": "math.floor(math.degrees(math.atan(line_width / 2.0 / layer_height)))" },
|
||||
"support_pattern": { "value": "'zigzag'" },
|
||||
"support_infill_rate": { "value": "0 if support_enable and support_structure == 'tree' else 20" },
|
||||
|
|
@ -129,8 +127,8 @@
|
|||
"support_brim_width": { "value": 4 },
|
||||
|
||||
"support_interface_enable": { "value": true },
|
||||
"support_structure": { "value": "'tree'" },
|
||||
"support_type": { "value": "'buildplate' if support_structure == 'tree' else 'everywhere'" },
|
||||
"support_structure": { "value": "'tree'" },
|
||||
"support_type": { "value": "'buildplate' if support_structure == 'tree' else 'everywhere'" },
|
||||
"support_interface_height": { "value": "layer_height * 4" },
|
||||
"support_interface_density": { "value": 33.333 },
|
||||
"support_interface_pattern": { "value": "'grid'" },
|
||||
|
|
|
|||
|
|
@ -84,7 +84,6 @@
|
|||
"material_initial_print_temperature": { "value": "material_print_temperature" },
|
||||
"material_final_print_temperature": { "value": "material_print_temperature" },
|
||||
"material_flow": { "value": 100 },
|
||||
"travel_compensate_overlapping_walls_0_enabled": { "value": "False" },
|
||||
|
||||
"z_seam_type": { "value": "'back'" },
|
||||
"z_seam_corner": { "value": "'z_seam_corner_weighted'" },
|
||||
|
|
@ -97,7 +96,6 @@
|
|||
"infill_wipe_dist": { "value": 0.0 },
|
||||
"wall_0_wipe_dist": { "value": 0.0 },
|
||||
|
||||
"fill_perimeter_gaps": { "value": "'everywhere'" },
|
||||
"fill_outline_gaps": { "value": false },
|
||||
"filter_out_tiny_gaps": { "value": false },
|
||||
|
||||
|
|
|
|||
|
|
@ -88,9 +88,6 @@
|
|||
|
||||
"wall_0_wipe_dist": { "value": 0.05 },
|
||||
"optimize_wall_printing_order": { "value": "True" },
|
||||
"travel_compensate_overlapping_walls_enabled": { "value": "False" },
|
||||
"travel_compensate_overlapping_walls_0_enabled": { "value": "False" },
|
||||
"travel_compensate_overlapping_walls_x_enabled": { "value": "False" },
|
||||
|
||||
"infill_sparse_density": { "value": 16 },
|
||||
"infill_wipe_dist": { "value": 0 },
|
||||
|
|
|
|||
|
|
@ -110,9 +110,6 @@
|
|||
"switch_extruder_retraction_speed": {
|
||||
"value": "30"
|
||||
},
|
||||
"travel_compensate_overlapping_walls_enabled": {
|
||||
"default_value": false
|
||||
},
|
||||
"raft_base_acceleration": {
|
||||
"value": "400"
|
||||
},
|
||||
|
|
@ -389,9 +386,6 @@
|
|||
"acceleration_support_infill": {
|
||||
"value": "400"
|
||||
},
|
||||
"travel_compensate_overlapping_walls_0_enabled": {
|
||||
"value": "False"
|
||||
},
|
||||
"support_bottom_material_flow": {
|
||||
"value": "99"
|
||||
},
|
||||
|
|
@ -644,9 +638,6 @@
|
|||
"skirt_line_count": {
|
||||
"default_value": 2
|
||||
},
|
||||
"travel_compensate_overlapping_walls_x_enabled": {
|
||||
"value": "False"
|
||||
},
|
||||
"jerk_wall_0": {
|
||||
"value": "5"
|
||||
},
|
||||
|
|
|
|||
|
|
@ -31,8 +31,7 @@
|
|||
"machine_heated_bed": { "default_value": true },
|
||||
|
||||
"material_diameter": { "default_value": 1.75 },
|
||||
|
||||
|
||||
|
||||
"speed_print": { "value": 50.0 } ,
|
||||
"speed_infill": { "value": "speed_print" },
|
||||
"speed_wall": { "value": "speed_print / 2" },
|
||||
|
|
@ -64,11 +63,9 @@
|
|||
"infill_wipe_dist": { "value": 0.0 },
|
||||
"wall_0_wipe_dist": { "value": 0.0 },
|
||||
|
||||
"fill_perimeter_gaps": { "value": "'everywhere'" },
|
||||
"fill_outline_gaps": { "value": false },
|
||||
"filter_out_tiny_gaps": { "value": false },
|
||||
|
||||
|
||||
"retraction_hop_enabled": { "value": "False" },
|
||||
"retraction_hop": { "value": 0.2 },
|
||||
"retraction_combing": { "value": "'off' if retraction_hop_enabled else 'noskin'" },
|
||||
|
|
@ -121,6 +118,5 @@
|
|||
"minimum_interface_area": { "value": 10 },
|
||||
"top_bottom_thickness": {"value": "layer_height_0 + layer_height * 3" },
|
||||
"wall_thickness": {"value": "line_width * 2" }
|
||||
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -19,7 +19,6 @@ speed_wall_0 = =speed_wall
|
|||
speed_wall_x = =speed_wall
|
||||
top_bottom_thickness = =wall_thickness
|
||||
wall_thickness = =line_width * 2
|
||||
fill_perimeter_gaps = nowhere
|
||||
infill_sparse_density = 15
|
||||
infill_line_width = =line_width
|
||||
jerk_print = 30
|
||||
|
|
|
|||
|
|
@ -19,7 +19,6 @@ speed_wall_0 = =speed_wall
|
|||
speed_wall_x = =speed_wall
|
||||
top_bottom_thickness = =wall_thickness
|
||||
wall_thickness = =line_width * 2
|
||||
fill_perimeter_gaps = nowhere
|
||||
infill_sparse_density = 15
|
||||
infill_line_width = =line_width
|
||||
jerk_print = 30
|
||||
|
|
|
|||
|
|
@ -19,7 +19,6 @@ speed_wall_0 = =speed_wall
|
|||
speed_wall_x = =speed_wall
|
||||
top_bottom_thickness = =wall_thickness
|
||||
wall_thickness = =line_width * 2
|
||||
fill_perimeter_gaps = nowhere
|
||||
infill_sparse_density = 15
|
||||
infill_line_width = =line_width
|
||||
jerk_print = 30
|
||||
|
|
|
|||
|
|
@ -19,7 +19,6 @@ speed_wall_0 = =speed_wall
|
|||
speed_wall_x = =speed_wall
|
||||
top_bottom_thickness = =wall_thickness
|
||||
wall_thickness = =line_width * 2
|
||||
fill_perimeter_gaps = nowhere
|
||||
infill_sparse_density = 15
|
||||
infill_line_width = =line_width
|
||||
jerk_print = 30
|
||||
|
|
|
|||
|
|
@ -19,7 +19,6 @@ speed_wall = =speed_print
|
|||
speed_wall_x = =speed_wall
|
||||
top_bottom_thickness = =wall_thickness
|
||||
wall_thickness = =line_width * 2
|
||||
fill_perimeter_gaps = nowhere
|
||||
infill_sparse_density = 15
|
||||
infill_line_width = =line_width
|
||||
jerk_print = 30
|
||||
|
|
|
|||
|
|
@ -19,7 +19,6 @@ speed_wall = =speed_print
|
|||
speed_wall_x = =speed_wall
|
||||
top_bottom_thickness = =wall_thickness
|
||||
wall_thickness = =line_width * 2
|
||||
fill_perimeter_gaps = nowhere
|
||||
infill_sparse_density = 15
|
||||
infill_line_width = =line_width
|
||||
jerk_print = 30
|
||||
|
|
|
|||
|
|
@ -19,7 +19,6 @@ speed_wall = =speed_print
|
|||
speed_wall_x = =speed_wall
|
||||
top_bottom_thickness = =wall_thickness
|
||||
wall_thickness = =line_width * 2
|
||||
fill_perimeter_gaps = nowhere
|
||||
infill_sparse_density = 15
|
||||
infill_line_width = =line_width
|
||||
jerk_print = 30
|
||||
|
|
|
|||
|
|
@ -19,7 +19,6 @@ speed_wall = =speed_print
|
|||
speed_wall_x = =speed_wall
|
||||
top_bottom_thickness = =wall_thickness
|
||||
wall_thickness = =line_width * 2
|
||||
fill_perimeter_gaps = nowhere
|
||||
infill_sparse_density = 15
|
||||
infill_line_width = =line_width
|
||||
jerk_print = 30
|
||||
|
|
|
|||
|
|
@ -19,7 +19,6 @@ speed_wall = =speed_print
|
|||
speed_wall_x = =speed_wall
|
||||
top_bottom_thickness = =wall_thickness
|
||||
wall_thickness = =line_width * 2
|
||||
fill_perimeter_gaps = nowhere
|
||||
infill_sparse_density = 15
|
||||
infill_line_width = =line_width
|
||||
jerk_print = 30
|
||||
|
|
|
|||
|
|
@ -19,7 +19,6 @@ speed_wall = =speed_print
|
|||
speed_wall_x = =speed_wall
|
||||
top_bottom_thickness = =wall_thickness
|
||||
wall_thickness = =line_width * 2
|
||||
fill_perimeter_gaps = nowhere
|
||||
infill_sparse_density = 15
|
||||
infill_line_width = =line_width
|
||||
jerk_print = 30
|
||||
|
|
|
|||
|
|
@ -19,7 +19,6 @@ speed_wall_0 = =speed_wall
|
|||
speed_wall_x = =speed_wall
|
||||
top_bottom_thickness = =wall_thickness
|
||||
wall_thickness = =line_width * 2
|
||||
fill_perimeter_gaps = nowhere
|
||||
infill_sparse_density = 15
|
||||
infill_line_width = =line_width
|
||||
jerk_print = 30
|
||||
|
|
|
|||
|
|
@ -19,7 +19,6 @@ speed_wall_0 = =speed_wall
|
|||
speed_wall_x = =speed_wall
|
||||
top_bottom_thickness = =wall_thickness
|
||||
wall_thickness = =line_width * 2
|
||||
fill_perimeter_gaps = nowhere
|
||||
infill_sparse_density = 15
|
||||
infill_line_width = =line_width
|
||||
jerk_print = 30
|
||||
|
|
|
|||
|
|
@ -19,7 +19,6 @@ speed_wall_0 = =speed_wall
|
|||
speed_wall_x = =speed_wall
|
||||
top_bottom_thickness = =wall_thickness
|
||||
wall_thickness = =line_width * 2
|
||||
fill_perimeter_gaps = nowhere
|
||||
infill_sparse_density = 15
|
||||
infill_line_width = =line_width
|
||||
jerk_print = 30
|
||||
|
|
|
|||
|
|
@ -19,7 +19,6 @@ speed_wall_0 = =speed_wall
|
|||
speed_wall_x = =speed_wall
|
||||
top_bottom_thickness = =wall_thickness
|
||||
wall_thickness = =line_width * 2
|
||||
fill_perimeter_gaps = nowhere
|
||||
infill_sparse_density = 15
|
||||
infill_line_width = =line_width
|
||||
jerk_print = 30
|
||||
|
|
|
|||
|
|
@ -23,7 +23,6 @@ wall_x_extruder_nr
|
|||
wall_thickness
|
||||
wall_line_count
|
||||
optimize_wall_printing_order
|
||||
fill_perimeter_gaps
|
||||
xy_offset
|
||||
|
||||
[top_bottom]
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue