Context: Print Thin Walls and Fill Perimeter Gaps are old settings that aren't needed any more since we switched to libArachne (Varianble Line Widths).
CURA-7148
Although it is not entirely sure yet, we are fairly certain that libArachne release will have
a setting version of 18, so it is changed by this commit. With this change, the VersionUpgrader
will be properly triggered.
Contributes to CURA-7683 and CURA-7656
Similar to the previous setting Wall Transition Length, but this determines how fast lines come together, which can be faster than the Wall Transition Length.
Contributes to issue CURA-7686.
This is quite a complex setting. Hopefully this helps a bit to understand it. Needs an extensive article in the Settings Guide I'd say!
Done alongside issue CURA-7686.
The draft and ooze shield use the skirt/brim settings to print. So these settings should be adjustable if the draft or ooze shield is enabled. It's a bit weird UX-wise, but it's correct. The UX problem will be tackled later.
Apparently this was already done for the speed/acceleration/jerk settings so no change necessary there.
Contributes to issue #8808.
Two problems with this description:
- It claims that meshes with lower rank override meshes with higher rank. It's the other way around.
- It mentions 'rank' in one sentence and then 'order' in the next. I've corrected this to use the term 'rank' in both sentences for clarity. This is also the term used for the setting label, to be consistent.
Found in issue #8821.
Fuzzy skin needs to be modified to work with the new libArachne toolpaths. Until then, it will
remain unavailable.
Contributes to CURA-7678 via CURA-7876
This setting denotes what is the maximum allowed area lost or gained when the middle junction of a
straight line is removed (due to the simplification). This area deviation exists due to the
difference of width of the colinear segments.
A B C A C
--------------- ************** deviation_error / 2
| |--------------------------- B removed ------------------------------------------
| | | ---------> | | |
| |--------------------------- ------------------------------------------
--------------- ^ ************** ^
^ C.w C.w
B.w
CURA-7751
The ProBundle rejects materials which have these values a positive number.
Users should not be allowed to set it to a positive number.
Fixes CURA-7856.
This platform mesh is 3MF (whose texture coordinates we cannot read) and doesn't contain actual texture coordinates either.
Contributes to issue CURA-7852.
* Add files via upload
* Add files via upload
* Add files via upload
* Update fusedform_300_draft_abs.inst.cfg
* Add files via upload
* Delete fusedform_300_draft_abs.inst.cfg
* Delete fusedform_300_draft_pla.inst.cfg
* Deletion of old files
* changes in STD quality profiles
* Changes in mini quality files
* Changes in FF600 quality files
* changes in machine definition name
* Changes in definition files
* extruder and definition linking
* ff300 inherits and extruder def
* Update fusedform_300.def.json
* category deprecation in definitions
* inherits
* ff300 extruder definition machine
* extruder machine definitions
* Fused form FF600plus machine profiles
* PETG profiles
* Update fusedform_300.def.json
* changes in start gcode
* machine configuration dynamics on definitions
* speed adjustments
* dynamics modification in petg and flex quality
* Further adjustments on dynamics definitiosn
* Modification of all files under inherits data structure.
* Quality setting version 15 to 16
* These changes are for limiting quality types in the materials defined
* Quality Modification under Global and Material specific structure
Global quality structures and material specific definitions under the global structures
* Addition of double extruder machine definitions
* Machine definitions update according to structure
* Doppia Base definitions erased, Doppia definitions updated to use a single base definition.
* extruder 1 base definition fix
* extruder train overrides
* extruder modifications
* Update fusedform_300_doppia.def.json
* Base settings and extruder definitions
* retraction modification to avoid filament damage
* REdefinition test of second extruder train in doppia
* Update fusedform_300_doppia.def.json
* Update fusedform_base_extruder_1.def.json
* Update fusedform_300_doppia.def.json
* Update fusedform_300_doppia.def.json
* Update fusedform_300_doppia.def.json
* Update fusedform_base_extruder_1.def.json
* Update fusedform_300_doppia.def.json
* Update fusedform_600_doppia.def.json
* Update fusedform_600_doppia.def.json
* Additional updates in Doppia definitions
* Creation of Doppia base definition, doppia extruders. Update in doppia machine definitions
* correction in quality definitions to pull base definitions from a single base
* more corrections
