3D-printing/Cura
1
0
Fork 0
mirror of https://github.com/Ultimaker/Cura.git synced 2025-07-24 23:23:57 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 9

Adjust the unit of the "Maximum Extrusion Area Deviation" setting

Browse source 
And along with it, also adjust the default value and minimum/maximum value warnings.

CURA-7751
This commit is contained in:
Kostas Karmas 2020-11-20 17:31:30 +01:00
parent 580a8f0290
commit 89c5698ad2
1 changed files with 4 additions and 4 deletions
Download patch file Download diff file Expand all files Collapse all files

8
resources/definitions/fdmprinter.def.json
View file

@ -6132,11 +6132,11 @@
"label": "Maximum Extrusion Area Deviation",
"description": "The maximum extrusion area deviation allowed when removing intermediate points from a straight line. An intermediate point may serve as width-changing point in a long straight line. Therefore, if it is removed, it will cause the line to have a uniform width and, as a result, lose (or gain) a bit of extrusion area. If you increase this you may notice slight under- (or over-) extrusion in between straight parallel walls, as more intermediate width-changing points will be allowed to be removed. Your print will be less accurate, but the g-code will be smaller.",
"type": "float",
"unit": "mm²",
"default_value": 2,
"unit": "μm²",
"default_value": 2000,
"minimum_value": "0",
"minimum_value_warning": "0.01",
"maximum_value_warning": "10",
"minimum_value_warning": "500",
"maximum_value_warning": "100000",
"settable_per_mesh": true
}
}