VORON V2.4 is an fast machine. There is no reason to limit
the user to 300mm/s. Unlock these speeds by removing maximum_value
which makes cura fallback to machine_max_feedrate_x/y which are
set to the C (299,792,458).
Warning stays at 501 after Fulg talked with some VORON
team members they have come to the conclusion that
501 is fine as people start hitting issues on the machine
around the 500-600 range
Signed-off-by: Martin Botka <martin.botka@somainline.org>
Conflicts:
plugins/Marketplace/resources/qml/PackageCardHeader.qml -> An improvement for future translations was made at the same time as a change to the label here.
Enabling this adds more control, possibly improving the productivity of the printer by allowing higher acceleration and jerk rates during travel moves where they have less of an impact.
Disabling this reduces the size of the g-code and the CPU requirements of the printer.
Contributes to issue CURA-8708.
I had to try out what this actually did, fortunately, the result was the same as the without brackets version in all cases, otherwise we'd have a pretty weird problem.
relates to PP-168 and in 5.0 becasue of CURA-9293
We don't want to filter based on the length of the filtered region, but based on the induced extra line width variation.
This diables the setting for the frontend, but doesn't fully remove it yet. TODO
material_shrinkage_percentage_xy and material_shrinkage_percentage_z cannot depend on material_shrinkage_percentage otherwise their resolve function will not execute properly.
I noticed that the shrinkage factors do not get the correct value if a wrong nozzle is chosen for a material. However, in that case the slicer will also not slice, so in practice this is not an issue
Relates to PP-77
New calculations to determine the average shrinkage when two materials are used. By default the material shrinkage is set to null (None). In that case the shrinkage of that material is not taken into account in the new averaging formula. Support materials such as PVA, BAM, Aquasys etc. should keep this setting to null. When two materials are used with a shrinkage percentage the average of these two materials will be used.
Relates to PP-77
We will only support the Inwards Distributed strategy type from here on out. You can achieve a similar result as that one by adjusting the Wall Distribution Count setting (1 is Center Deviation, 2 is Inwards Distributed, 999999 approximates Distributed).
Contributes to issue CURA-8466.
We've removed a bunch of settings and transformed others. To allow profiles to be checked for these and edited if necessary, we now need to increment this version number.
Contributes to issue CURA-8466.
It is no longer used since we've removed the Fill Gaps Between Walls setting. This setting is no longer referred to from CuraEngine.
Contributes to issue CURA-8466.
