Cura/resources/definitions
Martin Botka c466742cb1 voron2_base.def.json: Do not limit travel speeds to 300mm/s
VORON V2.4 is an fast machine. There is no reason to limit
the user to 300mm/s. Unlock these speeds by removing maximum_value
which makes cura fallback to machine_max_feedrate_x/y which are
set to the C (299,792,458).

Warning stays at 501 after Fulg talked with some VORON
team members they have come to the conclusion that
501 is fine as people start hitting issues on the machine
around the 500-600 range

Signed-off-by: Martin Botka <martin.botka@somainline.org>
2022-05-16 20:43:35 +02:00
..
3dator.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
3di_base.def.json Adding 3DI D300 (#9863) 2021-10-05 16:38:50 +02:00
3di_d300.def.json Adding 3DI D300 (#9863) 2021-10-05 16:38:50 +02:00
3dtech_semi_professional.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
101Hero.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
abax_pri3.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
abax_pri5.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
abax_titan.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
alfawise_u20.def.json Adjust wall thickness to 1 line if using spiralise 2020-03-24 14:22:28 +01:00
alfawise_u30.def.json Adjust wall thickness to 1 line if using spiralise 2020-03-24 14:22:28 +01:00
alya3dp.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
alyanx3dp.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
anet3d.def.json Partial revert: Don't remove 'Print Thin Walls'. 2020-12-10 12:49:00 +01:00
anet3d_a2.def.json Reduce retraction at the end of all Anet g-code 2020-03-26 14:47:41 +01:00
anet3d_a2_plus.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
anet3d_a6.def.json Reduce retraction at the end of all Anet g-code 2020-03-26 14:47:41 +01:00
anet3d_a8.def.json Reduce retraction at the end of all Anet g-code 2020-03-26 14:47:41 +01:00
anet3d_a8_plus.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
anet3d_e10.def.json Reduce retraction at the end of all Anet g-code 2020-03-26 14:47:41 +01:00
anet3d_e12.def.json Reduce retraction at the end of all Anet g-code 2020-03-26 14:47:41 +01:00
anet3d_e16.def.json Reduce retraction at the end of all Anet g-code 2020-03-26 14:47:41 +01:00
anet3d_et4.def.json Reduce retraction at the end of all Anet g-code 2020-03-26 14:47:41 +01:00
anet3d_et4_pro.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
anet3d_et4_x.def.json Reduce retraction at the end of all Anet g-code 2020-03-26 14:47:41 +01:00
anet3d_et5.def.json Reduce retraction at the end of all Anet g-code 2020-03-26 14:47:41 +01:00
anet3d_et5_x.def.json Reduce retraction at the end of all Anet g-code 2020-03-26 14:47:41 +01:00
anycubic_4max.def.json Remove incorrect reference to icons in some machine definitions 2021-08-22 19:57:09 +02:00
anycubic_chiron.def.json Remove incorrect reference to icons in some machine definitions 2021-08-22 19:57:09 +02:00
anycubic_i3_mega.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
anycubic_i3_mega_s.def.json Update anycubic_i3_mega_s.def.json 2022-02-14 19:22:23 +01:00
anycubic_i3_mega_x.def.json Update anycubic_i3_mega_x.def.json 2022-02-09 21:01:39 +01:00
anycubic_kossel.def.json Change tabs into 4 spaces 2020-10-12 17:14:29 +02:00
anycubic_kossel_linear_plus.def.json Move Kossel Pro platform mesh a bit lower to prevent Z-fighting 2021-07-16 10:48:24 +02:00
anycubic_kossel_pulley.def.json Fix printer name in setting 2020-10-12 17:15:25 +02:00
anycubic_mega_zero.def.json Fix combing value not being recognized 2021-09-29 13:35:21 +02:00
anycubic_vyper.def.json Add Anycubic Vyper 2021-08-25 11:59:19 +02:00
arjun300.def.json Minor corrections to Sri Vignan printers 2021-02-25 17:46:46 +01:00
arjun_duplication.def.json Minor corrections to Sri Vignan printers 2021-02-25 17:46:46 +01:00
arjun_mirrored.def.json Minor corrections to Sri Vignan printers 2021-02-25 17:46:46 +01:00
arjunpro300.def.json minor changes 2021-08-16 16:07:54 +05:30
arjunpro_duplication.def.json Consistent user-visible naming of Arjun Pro printers 2021-10-15 16:13:31 +02:00
arjunpro_mirrored.def.json Consistent user-visible naming of Arjun Pro printers 2021-10-15 16:13:31 +02:00
artillery_base.def.json Partial revert: Don't remove 'Print Thin Walls'. 2020-12-10 12:49:00 +01:00
artillery_genius.def.json Added the Artillery Sidewinder X1 and Genius (#8301) 2020-10-13 18:16:58 +02:00
artillery_sidewinder_x1.def.json Added the Artillery Sidewinder X1 and Genius (#8301) 2020-10-13 18:16:58 +02:00
atmat_asterion.def.json fixed my mistake in changing definition name 2020-04-18 21:39:57 +02:00
atmat_asterion_ht.def.json fixed my mistake in changing definition name 2020-04-18 21:39:57 +02:00
atmat_galaxy_500.def.json changed version of variants and names of files 2020-04-18 20:50:33 +02:00
atmat_galaxy_600.def.json changed version of variants and names of files 2020-04-18 20:50:33 +02:00
atmat_signal_pro_300_v1.def.json fixed my mistake in changing definition name 2020-04-18 21:39:57 +02:00
atmat_signal_pro_300_v2.def.json fixed my mistake in changing definition name 2020-04-18 21:39:57 +02:00
atmat_signal_pro_400_v1.def.json fixed my mistake in changing definition name 2020-04-18 21:39:57 +02:00
atmat_signal_pro_400_v2.def.json fixed my mistake in changing definition name 2020-04-18 21:39:57 +02:00
atmat_signal_pro_500_v1.def.json fixed my mistake in changing definition name 2020-04-18 21:39:57 +02:00
atmat_signal_pro_500_v2.def.json fixed my mistake in changing definition name 2020-04-18 21:39:57 +02:00
atmat_signal_pro_base.def.json Revert "fixed top bottom pattern zigzag in profiles" 2021-11-17 14:35:28 +01:00
atmat_signal_xl.def.json fixed my mistake in changing definition name 2020-04-18 21:39:57 +02:00
atmat_signal_xxl.def.json fixed my mistake in changing definition name 2020-04-18 21:39:57 +02:00
atmat_signal_xxxl.def.json fixed my mistake in changing definition name 2020-04-18 21:39:57 +02:00
atom2.def.json Update atom2.def.json 2021-11-12 12:16:44 +08:00
atom3.def.json refactor: Removes override "extrude_prime_pos_abs" 2021-03-15 14:27:46 +01:00
atom3_lite.def.json refactor: New meshes for Atom 3 / lite 2021-03-15 14:21:01 +01:00
atomstack_cambrian_base.def.json Canonical indentation 2021-09-08 16:19:48 +02:00
atomstack_cambrianmaxe175.def.json Don't use stylised caps 2021-09-08 16:20:00 +02:00
atomstack_cambrianmaxe285.def.json Don't use stylised caps 2021-09-08 16:20:00 +02:00
atomstack_cambrianproe175.def.json Canonical indentation 2021-09-08 16:19:48 +02:00
atomstack_cambrianproe285.def.json Canonical indentation 2021-09-08 16:19:48 +02:00
beamup_l.def.json Correct alignment after applying transformations 2020-06-26 17:59:49 +02:00
beamup_s.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
bfb.def.json Remove incorrect authors of profiles 2021-11-17 17:01:30 +01:00
bibo2_dual.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
biqu_b1.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
biqu_b1_abl.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
biqu_base.def.json Merge branch 'master' into CURA-8442_remove_wall_min_flow 2021-08-03 13:07:56 +02:00
biqu_bx_abl.def.json Fix up spelling 2021-07-27 14:31:23 +10:00
blv_mgn_cube_300.def.json Don't override the setting version 2021-09-14 16:27:17 +02:00
blv_mgn_cube_350.def.json Don't override the setting version 2021-09-14 16:27:17 +02:00
blv_mgn_cube_base.def.json Merge branch 'master' into libArachne_rebased 2021-06-16 18:04:54 +02:00
bq_hephestos.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
bq_hephestos_2.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
bq_hephestos_xl.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
bq_witbox.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
bq_witbox_2.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
builder_premium_large.def.json Merge branch 'master' of github.com:Ultimaker/Cura into 3mf_platform_meshes 2020-04-30 13:47:28 +02:00
builder_premium_medium.def.json Merge branch 'master' of github.com:Ultimaker/Cura into 3mf_platform_meshes 2020-04-30 13:47:28 +02:00
builder_premium_small.def.json Merge branch 'master' of github.com:Ultimaker/Cura into 3mf_platform_meshes 2020-04-30 13:47:28 +02:00
cartesio.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
cocoon_create.def.json Initial Cocoon Create attempt. 2020-08-06 16:11:13 +10:00
cocoon_create_modelmaker.def.json Adjust wall thickness to 1 line if using spiralise 2020-03-24 14:22:28 +01:00
cocoon_create_touch.def.json Initial Cocoon Create sources. 2020-08-06 16:10:44 +10:00
crazy3dprint_base.def.json update CrazyPrinter CZ-300 definitions 2021-08-09 11:51:53 +08:00
crazy3dprint_cz_300.def.json Merge branch 'master' of https://github.com/heed818/Cura into heed818-master 2022-01-27 15:39:34 +01:00
creality_base.def.json Merge branch 'libArachne_rebased' 2021-12-14 11:48:58 +01:00
creality_cr-x.def.json Merge branch 'master' of github.com:Ultimaker/Cura into 3mf_platform_meshes 2020-04-30 13:47:28 +02:00
creality_cr6se.def.json Add support for Creality CR-6 SE (#8407) 2020-09-28 12:25:17 +02:00
creality_cr10.def.json Merge machine_head_polygon and machine_head_with_fans_polygon defs. 2019-10-31 16:38:00 +01:00
creality_cr10max.def.json Update creality_cr10max.def.json 2020-10-07 16:10:22 +02:00
creality_cr10mini.def.json Merge machine_head_polygon and machine_head_with_fans_polygon defs. 2019-10-31 16:38:00 +01:00
creality_cr10s.def.json Make base Creality profile invisible (but the rest visible) 2019-07-02 12:00:24 +02:00
creality_cr10s4.def.json Merge machine_head_polygon and machine_head_with_fans_polygon defs. 2019-10-31 16:38:00 +01:00
creality_cr10s5.def.json Merge machine_head_polygon and machine_head_with_fans_polygon defs. 2019-10-31 16:38:00 +01:00
creality_cr10spro.def.json Merge branch 'master' of github.com:Ultimaker/Cura into 3mf_platform_meshes 2020-04-30 13:47:28 +02:00
creality_cr20.def.json Merge machine_head_polygon and machine_head_with_fans_polygon defs. 2019-10-31 16:38:00 +01:00
creality_cr20pro.def.json Make base Creality profile invisible (but the rest visible) 2019-07-02 12:00:24 +02:00
creality_cr100.def.json Fix up CR100 file name and version 2021-12-21 13:48:11 +01:00
creality_ender2.def.json Merge machine_head_polygon and machine_head_with_fans_polygon defs. 2019-10-31 16:38:00 +01:00
creality_ender3.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
creality_ender3max.def.json add ender-3 max profile 2021-12-03 01:28:50 -05:00
creality_ender3pro.def.json Merge branch 'master' of github.com:Ultimaker/Cura into 3mf_platform_meshes 2020-04-30 13:47:28 +02:00
creality_ender4.def.json Update creality_ender4.def.json 2021-04-17 04:28:21 -07:00
creality_ender5.def.json Only home X and Y 2021-11-10 23:43:32 -08:00
creality_ender5plus.def.json Change Ender 5 Plus end gcode to prevent BLTouch from colliding with frame on printer restart 2021-09-27 14:42:12 -05:00
creality_ender6.def.json Fix typos 2021-11-09 10:38:01 -05:00
creality_sermoond1.def.json Update creality_sermoond1.def.json 2021-12-17 14:27:33 +01:00
creasee_cs20.def.json Remove stylised caps for Creasee manufacturer 2021-07-05 17:55:01 +02:00
creasee_cs30.def.json Remove stylised caps for Creasee manufacturer 2021-07-05 17:55:01 +02:00
creasee_cs50spro.def.json Move creaseee extruders and definitions to correct folder 2021-10-08 10:52:10 +02:00
creasee_phoenix.def.json Move creaseee extruders and definitions to correct folder 2021-10-08 10:52:10 +02:00
creasee_skywalker.def.json Move creaseee extruders and definitions to correct folder 2021-10-08 10:52:10 +02:00
creatable_d3.def.json Fix combing value not being recognized 2021-09-29 13:35:21 +02:00
cremaker_common.def.json cremaker def files added (#10409) 2021-10-05 16:26:03 +02:00
cremaker_m_v1.def.json cremaker def files added (#10409) 2021-10-05 16:26:03 +02:00
cremaker_m_v2.def.json cremaker def files added (#10409) 2021-10-05 16:26:03 +02:00
cremaker_s_v1.def.json cremaker def files added (#10409) 2021-10-05 16:26:03 +02:00
cubicon_3dp_110f.def.json Remove ID metadata fields from definition files 2019-10-22 11:00:49 +02:00
cubicon_3dp_210f.def.json Remove ID metadata fields from definition files 2019-10-22 11:00:49 +02:00
cubicon_3dp_310f.def.json Remove ID metadata fields from definition files 2019-10-22 11:00:49 +02:00
cubicon_common.def.json Revert "fixed top bottom pattern zigzag in profiles" 2021-11-17 14:35:28 +01:00
cubicon_dual_pro_a30.def.json Add Cubicon plus A15 and A30 2019-09-12 14:05:13 +02:00
cubicon_style_neo_a22.def.json [CUBICON] Add device(Style NEO-A31) & Update start gcode. 2021-01-04 14:03:42 +09:00
cubicon_style_neo_a31.def.json [CUBICON] Add device(Style NEO-A31) & Update start gcode. 2021-01-04 14:03:42 +09:00
cubicon_style_plus_a15.def.json [CUBICON] Add device(Style NEO-A31) & Update start gcode. 2021-01-04 14:03:42 +09:00
custom.def.json Remove old 'category' metadata 2020-04-28 09:27:31 +02:00
dagoma_delta.def.json Fix typo in generic profile names... 2020-05-26 12:35:00 +02:00
dagoma_disco.def.json Set Z speed for dagoma disco 2021-07-06 11:45:04 +02:00
dagoma_discoeasy200.def.json Add 3mf meshes for mono extruder disco printers 2020-06-10 12:39:02 +02:00
dagoma_discoeasy200_bicolor.def.json Extruders gcodes sequences were inverted... 2020-06-10 11:43:44 +02:00
dagoma_discoultimate.def.json Align build plate correctly to build volume 2020-06-10 14:59:11 +02:00
dagoma_discoultimate_bicolor.def.json Extruders gcodes sequences were inverted... 2020-06-10 11:43:44 +02:00
dagoma_magis.def.json Integrate Gcode modifications from @Sophist-UK and use the inherits feature to gather common parameters between profiles 2020-05-26 12:28:20 +02:00
dagoma_neva.def.json Integrate Gcode modifications from @Sophist-UK and use the inherits feature to gather common parameters between profiles 2020-05-26 12:28:20 +02:00
dagoma_pro_430_base.def.json Updating profiles 2021-12-23 14:08:03 +01:00
dagoma_pro_430_bowden.def.json Updating profiles 2021-12-23 14:08:03 +01:00
delta_go.def.json Remove unused default_value overrides 2019-10-18 18:38:16 +02:00
deltabot.def.json Hide deltabot from Add Printer dialog 2020-03-23 09:37:34 +01:00
deltacomb_base.def.json Fix combing value not being recognized 2021-09-29 13:35:21 +02:00
deltacomb_dc20.def.json New Deltacomb 3D Printer Series profiles 2021-03-14 11:56:21 +01:00
deltacomb_dc20dual.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
deltacomb_dc20flux.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
deltacomb_dc21.def.json New Deltacomb 3D Printer Series profiles 2021-03-14 11:56:21 +01:00
deltacomb_dc21dual.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
deltacomb_dc21flux.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
deltacomb_dc30.def.json New Deltacomb 3D Printer Series profiles 2021-03-14 11:56:21 +01:00
deltacomb_dc30dual.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
deltacomb_dc30flux.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
diy220.def.json Minor corrections to Sri Vignan printers 2021-02-25 17:46:46 +01:00
dxu.def.json Remove incorrect reference to icons in some machine definitions 2021-08-22 19:57:09 +02:00
dxu_dual.def.json DXU profile 2020-02-19 22:55:08 +11:00
easyarts_ares.def.json Adjust wall thickness to 1 line if using spiralise 2020-03-24 14:22:28 +01:00
eazao_zero.def.json Remove unused setting 2021-11-24 12:03:47 +01:00
eryone_er20.def.json Update Eryone thinker and er20 3d printer profile (#10650) 2021-12-10 17:01:52 +01:00
eryone_thinker.def.json Remove Cura 4 settings 2021-12-15 10:09:42 +01:00
erzay3d.def.json Also remove not-existing-anymore settings from definitions and the like. 2021-08-06 18:23:10 +02:00
fabtotum.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
fabxpro.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
farm2.def.json add Farm 2 and Farm 2CE printer, extruder profiles, variants, quality, meshes and images. (#9574) 2021-06-22 16:54:21 +02:00
farm2_ce.def.json add Farm 2 and Farm 2CE printer, extruder profiles, variants, quality, meshes and images. (#9574) 2021-06-22 16:54:21 +02:00
fdmextruder.def.json Revert settings-version to the one for Arachne-builds. 2021-10-20 11:01:13 +02:00
fdmprinter.def.json Merge pull request #11345 from Ultimaker/scale_fan_speed 2022-03-25 15:58:16 +01:00
felixpro2dual.def.json Adjust wall thickness to 1 line if using spiralise 2020-03-24 14:22:28 +01:00
felixtec4dual.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
flashforge_base.def.json Cura Definition for Flasforge DreamerNX (#9303) 2021-03-08 16:51:45 +01:00
flashforge_dreamer_nx.def.json Move retraction amount and speed to definition for flashforge 2021-05-03 16:49:07 +02:00
flsun_q5.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
flsun_qq.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
flsun_qq_s.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
flsun_sr.def.json Improve FLSUN Super Racer profile (#10192) 2021-08-20 17:18:37 +02:00
flyingbear_base.def.json Merge branch 'master' into libArachne_rebased 2021-06-30 16:46:19 +02:00
flyingbear_ghost_4s.def.json Fix Power-loss Recovery and update G-codes for Flying Bear Base 2021-05-18 16:57:34 +03:00
flyingbear_ghost_5.def.json Fix Power-loss Recovery and update G-codes for Flying Bear Base 2021-05-18 16:57:34 +03:00
folgertech_FT-5.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
fusedform_300.def.json Double Extruder profiles (#8542) 2020-11-11 17:11:16 +01:00
fusedform_300_doppia.def.json Small parameter update for printing improvement (#8961) 2020-12-22 17:27:15 +01:00
fusedform_600.def.json Double Extruder profiles (#8542) 2020-11-11 17:11:16 +01:00
fusedform_600_doppia.def.json Double Extruder profiles (#8542) 2020-11-11 17:11:16 +01:00
fusedform_600plus.def.json Double Extruder profiles (#8542) 2020-11-11 17:11:16 +01:00
fusedform_600plus_doppia.def.json Small parameter update for printing improvement (#8961) 2020-12-22 17:27:15 +01:00
fusedform_base.def.json Also remove not-existing-anymore settings from definitions and the like. 2021-08-06 18:23:10 +02:00
fusedform_doppia_base.def.json Also remove not-existing-anymore settings from definitions and the like. 2021-08-06 18:23:10 +02:00
fusedform_mini.def.json Double Extruder profiles (#8542) 2020-11-11 17:11:16 +01:00
fusedform_std.def.json Double Extruder profiles (#8542) 2020-11-11 17:11:16 +01:00
fusedform_std_doppia.def.json Double Extruder profiles (#8542) 2020-11-11 17:11:16 +01:00
geeetech_A10.def.json Update Geeetech A10 definition 2021-03-04 14:16:36 +05:30
geeetech_A10M.def.json Fixed bed dimensions 2020-05-03 11:54:45 +02:00
geeetech_A10T.def.json Correct orientation of printer volume 2020-05-28 12:59:40 +02:00
geeetech_A20.def.json Correct capitalisation of Geeetech printer names 2020-01-30 15:47:18 +01:00
geeetech_A20M.def.json Correct heating up nozzle instead of build plate 2020-04-06 09:19:08 +02:00
geeetech_A20T.def.json Correct capitalisation of Geeetech printer names 2020-01-30 15:47:18 +01:00
geeetech_a30.def.json Update geeetech_a30.def.json 2021-07-10 18:24:00 +02:00
gmax15plus.def.json Merge branch 'master' of github.com:Ultimaker/Cura into 3mf_platform_meshes 2020-04-30 13:47:28 +02:00
gmax15plus_dual.def.json Merge branch 'master' of github.com:Ultimaker/Cura into 3mf_platform_meshes 2020-04-30 13:47:28 +02:00
goofoo_base.def.json Remove deleted settings from machine definitions 2021-09-28 14:59:09 +02:00
goofoo_cube.def.json Add new machine Goofoo Cube (#10962) 2022-02-03 17:24:24 +01:00
goofoo_e-one.def.json add goofoo,renkforce printf (#8959) 2021-08-06 15:14:24 +02:00
goofoo_far.def.json add goofoo,renkforce printf (#8959) 2021-08-06 15:14:24 +02:00
goofoo_gemini.def.json add goofoo,renkforce printf (#8959) 2021-08-06 15:14:24 +02:00
goofoo_giant.def.json add goofoo,renkforce printf (#8959) 2021-08-06 15:14:24 +02:00
goofoo_max.def.json add goofoo,renkforce printf (#8959) 2021-08-06 15:14:24 +02:00
goofoo_mido.def.json add goofoo,renkforce printf (#8959) 2021-08-06 15:14:24 +02:00
goofoo_miniplus.def.json add goofoo,renkforce printf (#8959) 2021-08-06 15:14:24 +02:00
goofoo_near.def.json add goofoo,renkforce printf (#8959) 2021-08-06 15:14:24 +02:00
goofoo_nova.def.json add goofoo,renkforce printf (#8959) 2021-08-06 15:14:24 +02:00
goofoo_open.def.json add goofoo,renkforce printf (#8959) 2021-08-06 15:14:24 +02:00
goofoo_plus.def.json add goofoo,renkforce printf (#8959) 2021-08-06 15:14:24 +02:00
goofoo_small.def.json add goofoo,renkforce printf (#8959) 2021-08-06 15:14:24 +02:00
goofoo_t-one.def.json add goofoo,renkforce printf (#8959) 2021-08-06 15:14:24 +02:00
goofoo_tiny.def.json add goofoo,renkforce printf (#8959) 2021-08-06 15:14:24 +02:00
goofoo_tinyplus.def.json add goofoo,renkforce printf (#8959) 2021-08-06 15:14:24 +02:00
grr_neo.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
hardprint_hozo.def.json Add Hozo, Hozo 3Dprinter (#10856) 2022-01-28 16:39:14 +01:00
hardprint_hozo_ix.def.json Add Hozo, Hozo 3Dprinter (#10856) 2022-01-28 16:39:14 +01:00
hellbot_adonis.def.json Fix whitespace 2019-09-26 10:33:44 +02:00
hellbot_hidra.def.json Squashed commit of the following: 2021-10-01 16:55:26 +02:00
hellbot_hidra_plus.def.json Squashed commit of the following: 2021-10-01 16:55:26 +02:00
hellbot_magna_2_230.def.json Squashed commit of the following: 2021-10-01 16:55:26 +02:00
hellbot_magna_2_230_dual.def.json Update extruder files for Magna 2 230 and 300 (#10695) 2021-12-15 18:55:38 +01:00
hellbot_magna_2_300.def.json Squashed commit of the following: 2021-10-01 16:55:26 +02:00
hellbot_magna_2_300_dual.def.json Update extruder files for Magna 2 230 and 300 (#10695) 2021-12-15 18:55:38 +01:00
hellbot_magna_2_400.def.json Squashed commit of the following: 2021-10-01 16:55:26 +02:00
hellbot_magna_2_400_dual.def.json Add new Hellbot 3D printer Magna SE (#10614) 2021-12-15 18:53:08 +01:00
hellbot_magna_2_500.def.json Squashed commit of the following: 2021-10-01 16:55:26 +02:00
hellbot_magna_2_500_dual.def.json Add new Hellbot 3D printer Magna SE (#10614) 2021-12-15 18:53:08 +01:00
hellbot_magna_dual.def.json Squashed commit of the following: 2021-10-01 16:55:26 +02:00
hellbot_magna_I.def.json Squashed commit of the following: 2021-10-01 16:55:26 +02:00
hellbot_magna_SE.def.json Add new Hellbot 3D printer Magna SE (#10614) 2021-12-15 18:53:08 +01:00
helloBEEprusa.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
hms434.def.json Change outer_before_inner setting to an enum 2021-06-17 17:57:51 +02:00
I3MetalMotion.def.json Fix name for the I3 Metal Motion 2020-05-26 14:00:12 +02:00
ideagen3D_sapphire_plus.def.json Fix various typos 2021-09-07 11:33:54 -04:00
imade3d_jellybox.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
imade3d_jellybox_2.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
imade3d_jellybox_root.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
inat_base.def.json Fix combing value not being recognized 2021-09-29 13:35:21 +02:00
inat_proton_x_rail.def.json Change default machine_height 2021-04-08 13:27:11 +02:00
inat_proton_x_rod.def.json Change default machine_height 2021-04-08 13:27:11 +02:00
innovo_inventor.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
jgaurora_a1.def.json Adjust wall thickness to 1 line if using spiralise 2020-03-24 14:22:28 +01:00
jgaurora_a3s.def.json Adjust wall thickness to 1 line if using spiralise 2020-03-24 14:22:28 +01:00
jgaurora_a5.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
jgaurora_a6.def.json Squashed commit of the following: 2021-04-15 14:26:31 +02:00
jgaurora_jgmaker_magic.def.json Adjust wall thickness to 1 line if using spiralise 2020-03-24 14:22:28 +01:00
jgaurora_z_603s.def.json Adjust wall thickness to 1 line if using spiralise 2020-03-24 14:22:28 +01:00
julia.def.json Remove incorrect authors of profiles 2021-11-17 17:01:30 +01:00
kemiq_q2_beta.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
kemiq_q2_gama.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
key3d_tyro.def.json Merge machine_head_polygon and machine_head_with_fans_polygon defs. 2019-10-31 16:38:00 +01:00
kingroon_base.def.json Removed old arachne settings 2021-08-03 13:25:09 +02:00
kingroon_kp3.def.json Added Kingroon K3P and K3PS definitions (#9972) 2021-07-30 10:41:57 +02:00
kingroon_kp3s.def.json Added Kingroon K3P and K3PS definitions (#9972) 2021-07-30 10:41:57 +02:00
koonovo_base.def.json Partial revert: Don't remove 'Print Thin Walls'. 2020-12-10 12:49:00 +01:00
koonovo_elf.def.json Fix up whitespace 2020-10-28 16:23:22 +01:00
koonovo_kn3.def.json Partial revert: Don't remove 'Print Thin Walls'. 2020-12-10 12:49:00 +01:00
koonovo_kn5.def.json Partial revert: Don't remove 'Print Thin Walls'. 2020-12-10 12:49:00 +01:00
koonovo_pyramid.def.json Fix up whitespace 2020-10-28 16:23:22 +01:00
kosher.def.json Minor corrections to Sri Vignan printers 2021-02-25 17:46:46 +01:00
kosher_duplication.def.json Minor corrections to Sri Vignan printers 2021-02-25 17:46:46 +01:00
kosher_mirror.def.json Minor corrections to Sri Vignan printers 2021-02-25 17:46:46 +01:00
kossel_mini.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
kossel_pro.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
kupido.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
leapfrog_bolt_pro.def.json Fix combing value not being recognized 2021-09-29 13:35:21 +02:00
leapfrog_creatr_hs.def.json Leapfrog Creatr HS / XL Integration (#7723) 2020-05-12 11:13:51 +02:00
leapfrog_creatr_hs_xl.def.json Leapfrog Creatr HS / XL Integration (#7723) 2020-05-12 11:13:51 +02:00
liquid.def.json Merge branch 'master' into merge_main_20211019 2021-10-20 08:38:01 +02:00
longer_base.def.json Merge branch 'master' into libArachne_rebased 2021-06-30 16:46:19 +02:00
longer_cube2.def.json Change adhesion_type to 'raft'; 2021-06-21 13:45:28 +02:00
longer_lk1.def.json Change adhesion_type to 'raft'; 2021-06-21 13:45:28 +02:00
longer_lk1plus.def.json Change adhesion_type to 'raft'; 2021-06-21 13:45:28 +02:00
longer_lk1pro.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
longer_lk4.def.json Change adhesion_type to 'raft'; 2021-06-21 13:45:28 +02:00
longer_lk4pro.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
longer_lk5.def.json Change adhesion_type to 'raft'; 2021-06-21 13:45:28 +02:00
longer_lk5pro.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
lotmaxx_sc10.def.json Change maximum resolution from 0.05mm to 0.25mm 2020-11-03 11:48:07 +01:00
lotmaxx_sc20.def.json Change maximum resolution from 0.05mm to 0.25mm 2020-11-03 11:48:07 +01:00
lotmaxx_sc60.def.json Partial revert: Don't remove 'Print Thin Walls'. 2020-12-10 12:49:00 +01:00
lulzbot_mini_2_common.def.json add Lulzbot TAZ Pro and Lulzbot Mini 2 profiles (#9335) 2021-03-09 09:27:46 +01:00
lulzbot_mini_2_se.def.json add Lulzbot TAZ Pro and Lulzbot Mini 2 profiles (#9335) 2021-03-09 09:27:46 +01:00
lulzbot_mini_2_sl.def.json add Lulzbot TAZ Pro and Lulzbot Mini 2 profiles (#9335) 2021-03-09 09:27:46 +01:00
lulzbot_taz_pro_common.def.json add Lulzbot TAZ Pro and Lulzbot Mini 2 profiles (#9335) 2021-03-09 09:27:46 +01:00
lulzbot_taz_pro_dual.def.json add Lulzbot TAZ Pro and Lulzbot Mini 2 profiles (#9335) 2021-03-09 09:27:46 +01:00
makeblock_mcreate.def.json Fix issues with makeblock definition 2019-11-11 13:43:04 +01:00
makeit_pro_l.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
makeit_pro_m.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
makeit_pro_mx.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
maker_made_300x.def.json Merge branch 'master' into merge_main_20211019 2021-10-20 08:38:01 +02:00
makeR_pegasus.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
makeR_prusa_tairona_i3.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
maker_starter.def.json Fix capitalization in what (should) refer(s) to a key-value. 2021-11-17 14:35:29 +01:00
makerbotreplicator.def.json Remove incorrect authors of profiles 2021-11-17 17:01:30 +01:00
malyan_m180.def.json Make my name more anonymous 2021-10-16 11:45:48 +02:00
malyan_m200.def.json Fix combing value not being recognized 2021-09-29 13:35:21 +02:00
mankati_fullscale_xt_plus.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
Mark2_for_Ultimaker2.def.json Remove old 'category' metadata 2020-04-28 09:27:31 +02:00
mbot3d_grid2plus.def.json remove has_machine_quality for grid 2+ 2020-03-17 23:27:00 +08:00
mbot3d_grid2plus_dual.def.json remove has_machine_quality for grid 2+ 2020-03-17 23:27:00 +08:00
mbot3d_grid4.def.json Remove old 'category' metadata 2020-04-28 09:27:31 +02:00
mbot3d_grid4_dual.def.json Remove old 'category' metadata 2020-04-28 09:27:31 +02:00
mendel90.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
mingda_base.def.json Merge branch 'Ultimaker:master' into master 2022-01-12 09:21:51 +08:00
mingda_d2.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
mingda_d3pro.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
mingda_d4pro.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
mingda_magician_max.def.json change the definition file names to be lowercase with underscores 2022-01-12 11:14:14 +08:00
mingda_magician_pro.def.json change the definition file names to be lowercase with underscores 2022-01-12 11:14:14 +08:00
mingda_magician_x.def.json change the definition file names to be lowercase with underscores 2022-01-12 11:14:14 +08:00
mingda_rock3.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
mixware_hyper_s.def.json Further fix automated tests for Mixware printer 2021-12-17 16:17:04 +01:00
monoprice_select_mini_v1.def.json Remove old 'category' metadata 2020-04-28 09:27:31 +02:00
monoprice_select_mini_v2.def.json Fix combing value not being recognized 2021-09-29 13:35:21 +02:00
monoprice_ultimate.def.json Fix manufacturer of Monoprice Ultimate 2019-08-05 10:43:49 +02:00
mp_mini_delta.def.json Minor MP Mini Delta V1 Def updates 2021-07-15 07:47:00 -05:00
mp_mini_delta_v2.def.json Removing mp_mini_delta_v2 default bed temperature. 2021-07-15 08:21:08 -05:00
nwa3d_a5.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
nwa3d_a31.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
ord.def.json Remove incorrect authors of profiles 2021-11-17 17:01:30 +01:00
pbr3d_g1.def.json Add PBR 3D Gen-I printer definition (#9307) 2021-07-06 11:42:44 +02:00
peopoly_moai.def.json Also remove not-existing-anymore settings from definitions and the like. 2021-08-06 18:23:10 +02:00
predator.def.json Squashed commit of the following: 2020-04-28 11:55:15 +02:00
printrbot_play.def.json Set default z-hop speed to allowed value 2021-07-06 11:47:47 +02:00
printrbot_play_heated.def.json Add check for platform mesh & texture 2019-02-15 14:42:50 +01:00
printrbot_simple.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
printrbot_simple_extended.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
printrbot_simple_makers_kit.def.json Overwrite gantry height value instead of default_value 2019-05-13 09:30:32 +02:00
prusa_i3.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
prusa_i3_mk2.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
prusa_i3_mk3.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
prusa_i3_xl.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
punchtec_connect_xl.def.json Remove incorrect authors of profiles 2021-11-17 17:01:30 +01:00
raise3D_N2_dual.def.json Remove old 'category' metadata 2020-04-28 09:27:31 +02:00
raise3D_N2_plus_dual.def.json Remove old 'category' metadata 2020-04-28 09:27:31 +02:00
raise3D_N2_plus_single.def.json Remove old 'category' metadata 2020-04-28 09:27:31 +02:00
raise3D_N2_single.def.json Remove old 'category' metadata 2020-04-28 09:27:31 +02:00
renkforce_basic3.def.json add goofoo,renkforce printf (#8959) 2021-08-06 15:14:24 +02:00
renkforce_pro3.def.json add goofoo,renkforce printf (#8959) 2021-08-06 15:14:24 +02:00
renkforce_pro6.def.json add goofoo,renkforce printf (#8959) 2021-08-06 15:14:24 +02:00
renkforce_rf100.def.json Fix combing value not being recognized 2021-09-29 13:35:21 +02:00
renkforce_rf100_v2.def.json Fix combing value not being recognized 2021-09-29 13:35:21 +02:00
renkforce_rf100_xl.def.json Fix combing value not being recognized 2021-09-29 13:35:21 +02:00
rigid3d.def.json Remove machine_head_polygon 2020-02-18 15:23:04 +03:00
rigid3d_3rdgen.def.json Remove machine_head_polygon 2020-02-18 15:23:04 +03:00
rigid3d_base.def.json Merge branch 'master' into libArachne_rebased 2021-07-16 08:49:46 +02:00
rigid3d_hobby.def.json Remove machine_head_polygon 2020-02-18 15:23:04 +03:00
rigid3d_mucit.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
rigid3d_mucit2.def.json Mucit2 Definition and Rigid3D Definition Updates 2021-02-12 01:50:26 +03:00
rigid3d_zero.def.json Remove machine_head_polygon 2020-02-18 15:23:04 +03:00
rigid3d_zero2.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
rigidbot.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
rigidbot_big.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
robo_3d_r1.def.json Remove incorrect authors of profiles 2021-11-17 17:01:30 +01:00
seckit_skgo.def.json Update resources/definitions/seckit_skgo.def.json 2021-07-28 03:28:59 +08:00
seckit_sktank.def.json Update resources/definitions/seckit_sktank.def.json 2021-07-28 03:28:49 +08:00
seemecnc_artemis.def.json Fix combing value not being recognized 2021-09-29 13:35:21 +02:00
seemecnc_v32.def.json Fix combing value not being recognized 2021-09-29 13:35:21 +02:00
sh65.def.json Add new VOLUMIC printers model 2021-11-09 13:42:17 +01:00
skriware_2.def.json Merge branch 'master' into merge_main_20211019 2021-10-20 08:38:01 +02:00
smoothie.def.json Indent using spaces, not a mix of tabs and spaces 2020-06-04 13:14:56 +02:00
snapmaker2.def.json - fixed snapmaker2 End-Gcode definition for Z return variable 2022-03-15 16:56:06 -04:00
snapmaker2_A150.def.json feat: add snapmaker 2.0 definitions 2021-01-18 07:57:07 -05:00
snapmaker2_A250.def.json feat: add snapmaker 2.0 definitions 2021-01-18 07:57:07 -05:00
snapmaker2_A350.def.json feat: add snapmaker 2.0 definitions 2021-01-18 07:57:07 -05:00
stereotech_start.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
stereotech_ste320.def.json Remove old 'category' metadata 2020-04-28 09:27:31 +02:00
strateo3d.def.json Fix combing value not being recognized 2021-09-29 13:35:21 +02:00
stream20dual_mk2.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
stream20pro_mk2.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
stream30dual_mk2.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
stream30mk3.def.json Add new VOLUMIC printers model 2021-11-09 13:42:17 +01:00
stream30pro_mk2.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
stream30ultra.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
stream30ultrasc.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
stream30ultrasc2.def.json Add new VOLUMIC printers model 2021-11-09 13:42:17 +01:00
structur3d_discov3ry1_complete_um2plus.def.json Remove unnecessary override of expansion angle to 45 degrees 2019-12-19 09:58:42 +01:00
SV01.def.json Fixed typo: positionning -> positioning 2020-11-28 22:45:58 +02:00
SV02.def.json Add files via upload 2020-06-09 19:04:51 +08:00
SV03.def.json Add Sovol SV03 Cura profiles 2021-04-09 21:07:54 -04:00
syndaveraxi.def.json Merge branch '4.10' 2021-06-14 15:27:13 +02:00
syndaveraxi2.def.json Merge branch '4.10' 2021-06-14 15:27:13 +02:00
tam.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
tevo_blackwidow.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
tevo_tarantula.def.json Set default z hop speed to maximum allowed value for tevo tarantula pro 2022-02-01 10:29:52 +01:00
tevo_tarantula_pro.def.json Set default z hop speed to maximum allowed value for tevo tarantula pro 2022-02-01 10:29:52 +01:00
tevo_tornado.def.json Merge machine_head_polygon and machine_head_with_fans_polygon defs. 2019-10-31 16:38:00 +01:00
tinyboy_e10.def.json Fix slashes in TinyBoy printer names 2020-06-15 18:02:13 +02:00
tinyboy_e16.def.json Fix slashes in TinyBoy printer names 2020-06-15 18:02:13 +02:00
tinyboy_fabrikator15.def.json fixed indentation 2021-12-06 21:17:36 +01:00
tinyboy_ra20.def.json Remove unused platform texture 2020-06-15 18:09:39 +02:00
tizyx_evy.def.json Fix combing value not being recognized 2021-09-29 13:35:21 +02:00
tizyx_evy_dual.def.json Fix combing value not being recognized 2021-09-29 13:35:21 +02:00
tizyx_k25.def.json Fix combing value not being recognized 2021-09-29 13:35:21 +02:00
trimaker_cosmosII.def.json Revert "fixed top bottom pattern zigzag in profiles" 2021-11-17 14:35:28 +01:00
trimaker_nebula.def.json Revert "fixed top bottom pattern zigzag in profiles" 2021-11-17 14:35:28 +01:00
tronxy_d01.def.json Start code revisions 2022-01-29 00:21:44 -05:00
tronxy_x.def.json Added omitted line 2022-02-01 15:22:16 -05:00
tronxy_x5sa.def.json Start code revisions 2022-01-29 00:21:44 -05:00
tronxy_x5sa_400.def.json Submitting for approval 2022-01-28 16:33:13 -05:00
tronxy_x5sa_500.def.json Submitting for approval 2022-01-28 16:33:13 -05:00
tronxy_xy2.def.json Start code revisions 2022-01-29 00:21:44 -05:00
tronxy_xy2pro.def.json Start code revisions 2022-01-29 00:21:44 -05:00
tronxy_xy3.def.json Start code revisions 2022-01-29 00:21:44 -05:00
tronxy_xy3proV2.def.json Start code revisions 2022-01-29 00:21:44 -05:00
two_trees_base.def.json Merge branch 'master' of github.com:Ultimaker/Cura into libArachne_rebased 2021-09-13 14:57:40 +02:00
two_trees_bluer.def.json Update resources/definitions/two_trees_bluer.def.json 2021-03-07 10:40:13 +08:00
two_trees_bluerplus.def.json Update resources/definitions/two_trees_bluerplus.def.json 2021-03-07 10:40:57 +08:00
two_trees_sapphireplus.def.json Update resources/definitions/two_trees_sapphireplus.def.json 2021-03-07 10:42:09 +08:00
two_trees_sapphirepro.def.json Update resources/definitions/two_trees_sapphirepro.def.json 2021-03-07 10:39:40 +08:00
ubuild-3d_mr_bot_280.def.json Remove old 'category' metadata 2020-04-28 09:27:31 +02:00
ultimaker.def.json Remove area_deviation from ultimaker.def.json 2022-03-25 14:41:56 +01:00
ultimaker2.def.json Flow equalization width factor as percentage 2021-11-12 14:13:25 +01:00
ultimaker2_extended.def.json Merge branch 'feature_add_printer_layout' of https://github.com/fieldOfView/Cura 2018-10-31 14:23:42 +01:00
ultimaker2_extended_olsson.def.json Shorten name of UM2E with Olsson 2019-09-16 15:15:17 +02:00
ultimaker2_extended_plus.def.json Remove UpgradeFirmware as supported machine action... 2018-10-03 21:00:23 +02:00
ultimaker2_go.def.json Remove UM2 upgrade selection machine action 2019-09-16 15:19:47 +02:00
ultimaker2_olsson.def.json Give Ultimaker 2 with Olsson the quality definition of the Ultimaker 2 2019-09-16 15:00:05 +02:00
ultimaker2_plus.def.json Set line widths equal to nozzle diameter 2021-09-16 10:27:44 +02:00
ultimaker2_plus_connect.def.json update definitions of ultimaker2+C, S3 and S5 2022-02-22 14:16:40 +01:00
ultimaker3.def.json remove all wall_thickness statements 2022-03-15 13:48:41 +01:00
ultimaker3_extended.def.json Update the update_url's for firmware updates 2021-07-29 15:21:46 +02:00
ultimaker_original.def.json PP-60: Major clean up. Moved all common (libArachne + 4.12) settings to ultimaker.def.json from which all Ultimaker machines inherit their values 2021-11-09 12:13:02 +01:00
ultimaker_original_dual.def.json Fix stupid copypaste error 2021-05-06 16:33:28 +02:00
ultimaker_original_plus.def.json WIP: Remove UMOCheckup MachineAction 2019-03-19 15:47:49 +01:00
ultimaker_s3.def.json remove all wall_thickness statements 2022-03-15 13:48:41 +01:00
ultimaker_s5.def.json remove all wall_thickness statements 2022-03-15 13:48:41 +01:00
uni_200.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
uni_250.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
uni_300.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
uni_base.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
uni_mini.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
uni_print_3d.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
uniqbot_one.def.json Overwrite gantry height value instead of default_value 2019-05-13 09:30:32 +02:00
vertex_delta_k8800.def.json Adjust wall thickness to 1 line if using spiralise 2020-03-24 14:22:28 +01:00
vertex_k8400.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
vertex_k8400_dual.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
vertex_nano_k8600.def.json Adjust wall thickness to 1 line if using spiralise 2020-03-24 14:22:28 +01:00
voron0_120.def.json Rename visual name from Voron V0 to Voron 0 2021-07-02 13:46:32 +02:00
voron2_250.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
voron2_300.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
voron2_350.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
voron2_base.def.json voron2_base.def.json: Do not limit travel speeds to 300mm/s 2022-05-16 20:43:35 +02:00
voron2_custom.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
wanhao_d4s.def.json Updated to reference speed_travel macro 2018-11-02 09:39:12 -04:00
wanhao_d6.def.json Overwrite gantry height value instead of default_value 2019-05-13 09:30:32 +02:00
wanhao_d6_plus.def.json Updated to reference speed_travel macro 2018-11-02 09:39:12 -04:00
wanhao_d9.def.json Remove unused default_value overrides 2019-10-18 18:38:16 +02:00
wanhao_duplicator5S.def.json Updated to reference speed_travel macro 2018-11-02 09:39:12 -04:00
wanhao_duplicator5Smini.def.json Updated to reference speed_travel macro 2018-11-02 09:39:12 -04:00
wanhao_i3.def.json Updated to reference speed_travel macro 2018-11-02 09:39:12 -04:00
wanhao_i3mini.def.json Updated to reference speed_travel macro 2018-11-02 09:39:12 -04:00
wanhao_i3plus.def.json Updated to reference speed_travel macro 2018-11-02 09:39:12 -04:00
weedo_x40.def.json Remove deleted settings from machine definitions 2021-09-28 14:59:09 +02:00
winbo_dragonl4.def.json Correct superfluous commas, 2021-08-06 18:31:04 +02:00
winbo_mini2.def.json Correct superfluous commas, 2021-08-06 18:31:04 +02:00
winbo_superhelper105.def.json Correct superfluous commas, 2021-08-06 18:31:04 +02:00
winbo_superhelper155.def.json Remove old 'category' metadata 2020-04-28 09:27:31 +02:00
xyzprinting_base.def.json parameter update 2021-12-01 14:32:06 +08:00
xyzprinting_da_vinci_1p0_pro.def.json remove unnecessary default_values 2021-10-04 13:01:07 +08:00
xyzprinting_da_vinci_jr_1p0a_pro.def.json modify the heated bed setting 2021-11-22 10:25:56 +08:00
xyzprinting_da_vinci_jr_pro_xeplus.def.json modify the heated bed setting 2021-11-22 10:25:56 +08:00
xyzprinting_da_vinci_jr_pro_xplus.def.json remove unnecessary default_values 2021-10-04 13:01:07 +08:00
xyzprinting_da_vinci_jr_w_pro.def.json parameter update 2021-12-01 14:32:06 +08:00
xyzprinting_da_vinci_super.def.json remove unnecessary default_values 2021-10-04 13:01:07 +08:00
z-bolt_classic.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
z-bolt_plus.def.json Replace STL meshes with 3MF files 2020-04-18 22:40:43 +02:00
zav_base.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
zav_big.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
zav_bigplus.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
zav_l.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
zav_max.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
zav_maxpro.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
zav_mini.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00
zone3d_printer.def.json Remove incorrect authors of profiles 2021-11-17 17:01:30 +01:00
zyyx_agile.def.json Standardise capitalisation of printer names 2021-06-11 13:49:35 +02:00