- Add a new field "variant" in "metadata" section for quality profiles.
"material" will only contain values such as "generic_abs", and
"variant" will contain values such as "0.25 mm", "AA 0.4", etc.
- Reformat "metadata" section to have the following order:
- setting_version
- type
- quality_type
- weight
- global_quality
- material
- variant
Changed infill to Cross3D 10% (no gradual) for a more isotropic flexibility of parts. Cross3D also prints without travels (if possible) and looks great.
Optimization for faster printing with the 0.8mm profiles for PLA. Also removed retract at layer change for less artifacts, and changed infill pattern to triangular for more unity between profiles.
This was probably caused by having wrong default profiles.
We're checking the rest of the settings again now just to be sure, because this probably has more implications elsewhere too.
CURA-4451
- Add upgrade script for 3.0. to 3.1
- Upgrade old stack files so they will use "empty_quality" as the
"Not Supported" quality profile.
- Increase SettingVersion to 4
The prime tower is enabled for the other two quality profiles but not for this one, so we're making this consistent (with confirmation from the Materials team).
CURA-3975
Rename quality profiles with name "Not Supported" to have actual quality
names. Note that the "Not Supported" only ones are renamed to "Fast_Print".
And then also update the profiles to make the profiles end up at what it was originally (I confirmed this with the materials team).
Contributes to issue CURA-3960.
The stand-by temperature should be 175 for these profiles because the UM3 firmware levels the bed with that temperature. It should be 100 in the quality profiles because that's what the stand-by temperature should be when standing by while the other nozzle is printing.
Contributes to issue CURA-3960.
The stand-by temperature in the material profiles is the temperature at which the build plate levelling should be done. The actual stand-by temperature in Cura should be 100, so these profiles have to overwrite the material profile then.
Contributes to issue CURA-3960.
These profiles have been tested and they are in the process of optimising them, but there is still some room for improvement there so this is supposed to lower the expectations of our users.
Contributes to issue CURA-3960.
They are now supported. This breaks the stacks of people who had these profiles active when they upgraded from 2.6.0 to 2.6.1, which causes them to get a screen of which printer they want to add, and they lose their current settings. But we decided that this use case is too slim to make an entire version upgrade for this patch-version release.
Contributes to issue CURA-3960.
This removes all settings that are equal to the defaults. Some settings are 'common' between all profiles of the same material. I've let those settings bubble up to the material profiles but that change is then obviously only apparent in the fdm_materials repository.
Contributes to issue CURA-3960.
