Anson Liu
786c5ca0aa
Merge branch 'Ultimaker:main' into dxu_umo_definition
2022-11-29 14:31:42 -05:00
Jaime van Kessel
8b42d0ca8c
Merge pull request #13817 from Ultimaker/PP-69-default-max-comb-distance
...
PP-69-default-max-comb-distance
2022-11-29 09:18:38 +01:00
Paul Kuiper
dfd51f1e88
Changed the support interface pattern from concentric to zigzag, this will also automatically put a wall around the support interface.
...
Relates to PP-183
2022-11-28 16:47:44 +01:00
Paul Kuiper
c58c541afd
Made the default skirt/brim extruder -1 (not overridden), this will create the a brim with the same material as the mesh for each mesh. Fixed the brim tower setting to reflect changes in the brim behavior. When the brim is enabled for the whole print it does not enable it for the prime tower anymore. Lastly we reduced the brim inside avoid distance to a smaller value to improve the adhesion of large inner objects.
...
Relates to PP-36
2022-11-28 13:19:09 +01:00
Remco Burema
6a126f4d6b
Merge pull request #13799 from NilsRo/master
...
disable lin. adv. if accidently enabled by earlier print
2022-11-25 12:41:24 +01:00
Casper Lamboo
5a75678caf
Merge pull request #13762 from Ultimaker/CURA-9548_min_support_area_split
...
[CURA-9548] The engine now operates on the area _before_ the offset.
2022-11-17 14:47:30 +01:00
Jelle Spijker
cc9a698f42
Merge pull request #13775 from Ultimaker/CURA-9350_support_interface_wall
...
[CURA-9350] support interface wall
2022-11-15 16:17:21 +01:00
Casper Lamboo
52891f5a36
Merge pull request #11449 from Ultimaker/interlocking_gen
...
Settings for Interlocking Structure Generation
2022-11-15 13:07:03 +01:00
Rijk van Manen
fff03deefa
default max comb distance = 15mm
...
All ultimaker profiles get a default max combing distance of 15mm to avoid oozing in the infill. Profile/material specific settings are removed. PP-69
2022-11-14 13:20:29 +01:00
Jaime van Kessel
3314929e44
Merge pull request #13776 from Ultimaker/PP-275-increase-initial-layer-skin-flow
...
PP-275-increase-initial-layer-skin-flow
2022-11-14 11:52:57 +01:00
NilsRo
0bae61b97a
Update anycubic_i3_mega_s.def.json
...
Disable lin. adv. if set from ealier print and not in GCODE
2022-11-12 10:32:31 +01:00
Remco Burema
57c6a228aa
Expose per-model retraction settings.
...
Related engine PR made it possible to do this. No PR was made to expose these to the front-end as far as I can see, so (since this was a PRwe where very behind on -- like 10 months or so) I choose to do it myself instead of asking the original author.
part of CURA-9876
2022-11-11 11:02:05 +01:00
Luke Harrison
a2a9df5997
Increased retraction slightly. Still waiting for merge so fiddling.
2022-11-09 21:18:45 +02:00
Rijk van Manen
0222c79f59
increase initial layer skin flow
...
For large prints the initial layer skin flow turns out to be too low. PP-275
2022-11-09 16:26:56 +01:00
Remco Burema
c23b019f16
Couple support roof/floor wall-count to parent setting by default.
...
part of CURA-9350
2022-11-09 15:23:00 +01:00
Remco Burema
bcb88981b7
Add support interface wall count settings.
...
part of CURA-9350
2022-11-08 18:00:44 +01:00
Remco Burema
802effd805
The engine now operataes on the area _before_ the offset.
...
The frontend should compensate for that: Do _not_ apply the formula, as this now happens implicitly.
CURA-9548
2022-11-08 15:11:59 +01:00
Ed Ropple
226dbe57a1
changed cr10smart to refer to creality_base for 5.2.1 compat
2022-11-02 18:24:11 -04:00
Ed Ropple
46d76edc20
renamed .json to .def.json
2022-11-02 18:16:20 -04:00
Ed Ropple
dbcf6afd20
added definition and variants or Creality CR-10 Smart
2022-11-02 01:11:10 -04:00
Remco Burema
f75cb7a48b
Merge pull request #11678 from Ultimaker/brim_per_material_optimized_order
...
Brim overhaul: New features and bug fixes
2022-10-30 17:59:36 +01:00
Jaime van Kessel
5c18a37f60
Merge branch 'main' of github.com:Ultimaker/Cura into PP-251_create_annealing_intent
2022-10-26 11:28:58 +02:00
Luke Harrison
225fed0519
More tweaks because I am bored and it has not been merged yet.
2022-10-25 22:18:34 +02:00
Remco Burema
ab51bd699e
Merge branch 'main' into brim_per_material_optimized_order
2022-10-25 17:31:13 +02:00
Luke Harrison
09f620e6ce
Dial back iniital layer speed
2022-10-24 14:12:49 +02:00
Luke Harrison
50e22a122a
More small tweaks
2022-10-24 13:18:27 +02:00
Luke Harrison
00e7a20d32
Small settings tweaks. Here's hoping for a 5.2.2 merge
2022-10-24 12:41:57 +02:00
Rijk van Manen
d5020425bc
fix mistakes
...
PP-42
2022-10-17 15:55:03 +02:00
Rijk van Manen
7612faea79
make initial flow settings a fraction of the initial layer flow
...
PP-42
2022-10-17 14:51:05 +02:00
Rijk van Manen
9f6a47f04a
Merge branch 'main' into PP-42_improved_initial_layer_settings
2022-10-17 13:51:20 +02:00
0r31
975734290f
Set infill_before_walls and inset_direction defaults
2022-10-11 12:38:16 +02:00
Luke Harrison
f638942dd5
Added the Hurakan
2022-10-09 22:38:15 +02:00
0r31
0c81010681
Set value (not default_value) of speed_travel
2022-10-07 16:48:55 +02:00
0r31
8a65e8d318
Introduces Dagoma Sigma printer and enhance Pro430 profiles (definitions, variants, qualities)
2022-10-07 16:32:16 +02:00
Remco Burema
1e1ec7c6e5
For tree support default should be support wall count 1.
...
part of CURA-7800
2022-10-06 22:23:24 +02:00
Rijk van Manen
c90c7e688a
fix cool fan mistake
...
PP-42
2022-10-06 16:23:31 +02:00
Rijk van Manen
27d56d378e
improve initial layer settings
...
ultimaker.def.json is also cleaned and put in alphabetic order.
Ultimaker 2 and original are kept mostly as they were, since they are not tested. PP-42
2022-10-06 16:11:04 +02:00
Paul Kuiper
f3b9c73d0f
Create a resolve function on the "support_enable" setting such that underlying extruders (and thus also intent profiles) can enable support.
...
Relates to PP-251
2022-10-05 21:03:17 +02:00
Anson Liu
1b705338b8
Updated dual extruder start and end gcode
2022-10-05 13:04:04 -04:00
Anson Liu
f1fc0b44f7
Updated start and end gcode
2022-10-05 13:03:39 -04:00
Anson Liu
66ddf297b7
Merge branch 'Ultimaker:main' into dxu_umo_definition
2022-10-05 13:03:02 -04:00
c.lamboo
b33cff33f5
Disable "Remove Raft Inside Corners" setting by default
2022-10-03 11:28:22 +02:00
c.lamboo
a2c85dced9
Revert "Enable zigzag instead of the lines paatern on the skin layers. This improves print speed and quality. I used to decrease bridging quality, but due to enabling experimental bridging in the print profiles this can now be used."
...
This reverts commit 863e1ecbae
2022-09-29 16:09:00 +02:00
Anson Liu
4830eb8f5a
Update nozzle heat up speed
2022-09-20 09:37:23 -04:00
Anson Liu
4201305712
Update nozzle heat up speed
2022-09-20 09:37:00 -04:00
Jaime van Kessel
d8f304ca49
Fix description of wall_x_material_flow_layer_0
...
CURA-9433
2022-09-20 14:13:00 +02:00
Jaime van Kessel
d64b07d11f
Revert "Pp 230 enable conical support ( #13295 )"
...
This reverts commit 47b414a4ae
2022-09-20 13:43:02 +02:00
Jaime van Kessel
ac804389f6
Apply suggestions from code review
...
CURA-9433
Co-authored-by: Casper Lamboo <c.lamboo@ultimaker.com>
2022-09-19 17:18:09 +02:00
Jaime van Kessel
a53c9636af
Add initial layer flow settings
...
CURA-9433
2022-09-19 13:08:13 +02:00
goofoo3d
d6bc4067f9
Add some Renkforce Machines ( #12598 )
...
Add goofoo, renkforce printf
Co-authored-by: laiqiqi <laiqiqi886@163.com>
2022-09-16 10:14:03 +02:00
