This is just a refactor that shouldn't have any influence on the behaviour.
It is a necessary prerequisite to be able to trigger the updating of the layer view colour spectrum more frequently, i.e. if the visible line types change.
This way, if travel moves are not currently visible in the layer view, the travel moves don't get counted with the limits to determine the colour spectrum to grade each line with. Quite often, travel moves had a much greater speed than other moves, like 120mm/s instead of the fastest printed line 60mm/s. This caused all of the layer view to be pushed into the lower end of the spectrum. It makes it hard to distinguish the differences in speed and line width because travel moves influence the spectrum so much. This way, the travel moves only influence the spectrum if they are visible. If they are visible, it might be relevant to the user. Otherwise, the user gets the full spectrum to differentiate between all the line widths and speeds.
This currently doesn't update correctly yet. That is something we'll need to fix.
The actual package name internally will still have the spaces.
People were using this to get ahead in the sorting of packages, which is a little unfair. This doesn't make that impossible, but prevents it for the most part.
So there is an issue with keyring w.r.t. frozen installs (maybe also local). If you have pywin32 installed, it works fine locally. Take a note here, that a variant of this package, pywin32-ctypes, a rudimentary version of that package that works wholly within python, is already installed as its a dependency for keyring on windows. Due to an unknown reason, when running it fails to detect this, so some workaround is needed, _or_ the 'normal' pywin32 package should be installed. However, problems occurred when attempts where made to install pywin32 via cx_freeze. Then the actual workaround was encountered (https://github.com/jaraco/keyring/issues/468), which _should_ hopefully let use use the keyring on windows without needing the 'full' version of pywin32.
CURA-7180
Ensure we disable bed temp and turn off all fans.
Move the nozzle up by 0.5mm and retract to remove wipe on model top layer.
Co-authored-by: Demetrius Apostolopoulos <75643490+dapostol73@users.noreply.github.com>
After installing a package and hitting the "Close Ultimaker Cura" button, the Toolbox window
was remaining open for a few seconds, even though the Cura window was instantly closing.
This is not fixed by explicitly hiding the Toolbox dialog once that button is pressed.
CURA-8126
We generally disabled the clicks in the mouseArea of the tooltips.
In this case though it should still accept the left click since it acts as a button.
CURA-8125
The Connections in qml is a QObject and it has an enabledChanged signal by default.
Therefore, we cannot really use the Connections to connect to the enabledChanged signal of e.g.
a python class, because qml complains that there is already a function named enabledChanged() in
the Connections.
To circumvent that, we can simply rename the enabledChanged() signal of the Toolbox to
toolboxEnabledChanged().
The Windows Credential Manager allows for up to 256bits passwords. If a password longer than that
is attempted to be written, it will throw a BaseException.
CURA-7180
The top of the build plate mesh seems to be 1mm into the build volume in its actual coordinates. The mesh was lowered by 0.8mm. Probably they tried to lower it by 1mm first and then found that it was z-fighting. I'm resolving the z-fight the other way around so that the mesh actually appears completely below the build volume. This makes the build plate grid more clear. No more grey film on top of it.
Left and right anchors can't work at the same time with the horizontalCenter. In this case it
makes more sence to remove the horizontalCenter, since the left and right ones also define the
width of the rectangle.
CURA-8014
