We created a new set of icons for Cura. These icons had to be reverted though because they weren't working out in the interface for the last release yet.
This unreverts them, basically adding them back hoping that we'll get them fixed in time for the next release.
Contributes to issue CURA-8342.
Revert "Revert "Fix merge conflict""
This reverts commit bb20e3307f.
Revert "Revert "Merge pull request #9716 from Ultimaker/CURA-8010_new_icons""
This reverts commit 70e4e9640e.
Revert "Revert "Fix typo in icon name""
This reverts commit 38ce22ba7c.
Revert "Revert "Add list for deprecated icons""
This reverts commit 119a957e7f.
Revert "Revert "Add Function icon""
This reverts commit 760726cf0b.
Revert "Revert "Switch out inherit icon""
This reverts commit 26afff6093.
Revert "Revert "Merge branch 'CURA-8205_Introduce_new_icons_in_Cura' of github.com:Ultimaker/Cura""
This reverts commit 6483db3d47.
Revert "Fix incorrect icons"
This reverts commit 02a4ade2a5.
The setting influences support meshes. If support was disabled but there was a support mesh, this setting would influence the slice result even if it was invisible.
Fixes#10002.
Technically, moving the feeder wheel by 1mm doesn't guarantee that the filament gets extruded by 1mm, since there might be slip.
Reported in issue #9924.
Revert "Change file extension to .umm"
This reverts commit 56db7f7144.
Revert "Re-enable compression"
This reverts commit 62bc9be22b.
Revert "Add documentation"
This reverts commit e9031f1aff.
Revert "Fix writing bytes to string-stream"
This reverts commit 66b2825a66.
Revert "Hide button entirely if no export is available"
This reverts commit ec727e1068.
Revert "Basic implementation of exporting all materials in a .zip archive"
This reverts commit bdcaef134f.
Revert "Implement default path for exporting all materials"
This reverts commit e66783664b.
Revert "Implement a sync button and file dialogue to export all materials"
This reverts commit abba3bdd10.
Revert "Add notion of whether printers support the material export archive"
This reverts commit f436cb8e7b.
Should've done this in the merge, but I just increased the setting_version for these.
I also removed a deleted setting from the advanced visibility. We don't have tests that ensure that these visibility presets are good. Lucky I found it then, with a Ctrl+Shift+F search.
We'll offer the option to print from outside to inside, from inside to outside, or from inside to outside except that the very innermost centre wall is printed last.
Contributes to issue CURA-8109.
Conflicts:
cura/CuraApplication.py: Setting version
fdmprinter and fdmextruder: Setting version
intents, qualities and variants: Setting version
Changelog: 4.9.1 was added, should be below Arachne changes
Some contributors seem to have a shift key stuck here or there. Many 'stylised' capitalisations weren't reflected even on the manufacturer's websites, or were also stylising words like 'pro' and 'dual' or even actual chemical names like 'nylon'. Normalising the caps makes it more fair for everyone, since all of these are written in the same font.
As discussed with the Cura team.
- Travel avoid supports
- Dual Extrusion : switch_extruder_retraction_amount = 10
- PETg updates
- Reduced infill jerk in "quick" intent and removed useless first layer jerk
- Removed no more used 1.2x material_flow_layer_0 in order to compensate a bad bed leveling
- Rewiewed forced PLA and PETg temperatures
Remove start G-code from Flying Bear Ghost 5 because it was causing positioning problems during Power-loss Recovery
Update machine_start_gcode and machine_end_gcode for Flying Bear Base
Update machine_height for Flying Bear Ghost 4S / 5 to a safe value