Merge branch 'master' of github.com:Ultimaker/Cura

resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.4_draft.inst.cfg

@@ -0,0 +1,42 @@
+[general]
+version = 2
+name = Draft Print
+definition = ultimaker2_extended_plus
+
+[metadata]
+type = quality
+material = generic_cpe_plus_ultimaker2_extended_plus_0.4_mm
+weight = 0
+quality_type = draft
+
+[values]
+speed_wall_x = 25
+support_z_distance = 0.26
+raft_interface_line_spacing = 1
+cool_min_speed = 8
+cool_fan_speed = 50
+wall_thickness = 1.14
+raft_margin = 15
+speed_layer_0 = 15
+raft_airgap = 0.37
+infill_overlap = 5
+layer_height = 0.2
+raft_interface_line_width = 0.8
+top_bottom_thickness = 1.5
+cool_fan_speed_min = 25
+raft_surface_line_width = 0.38
+support_pattern = lines
+support_infill_rate = 20
+speed_topbottom = 20
+support_enable = True
+speed_wall_0 = 20
+adhesion_type = raft
+infill_sparse_density = 30
+layer_0_z_overlap = 0.22
+cool_min_layer_time = 3
+speed_print = 25
+line_width = 0.38
+support_angle = 45
+raft_base_line_spacing = 1.6
+raft_base_line_width = 0.8
+

resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.4_normal.inst.cfg

@@ -0,0 +1,42 @@
+[general]
+version = 2
+name = Normal Quality
+definition = ultimaker2_extended_plus
+
+[metadata]
+type = quality
+material = generic_cpe_plus_ultimaker2_extended_plus_0.4_mm
+weight = 0
+quality_type = normal
+
+[values]
+speed_wall_x = 30
+support_z_distance = 0.26
+raft_interface_line_spacing = 1
+cool_min_speed = 8
+cool_fan_speed = 50
+wall_thickness = 1.14
+raft_margin = 15
+speed_layer_0 = 15
+raft_airgap = 0.37
+infill_overlap = 5
+layer_height = 0.15
+raft_interface_line_width = 0.8
+top_bottom_thickness = 1.5
+cool_fan_speed_min = 25
+raft_surface_line_width = 0.38
+support_pattern = lines
+support_infill_rate = 20
+speed_topbottom = 20
+support_enable = True
+speed_wall_0 = 20
+adhesion_type = raft
+infill_sparse_density = 30
+layer_0_z_overlap = 0.22
+cool_min_layer_time = 3
+speed_print = 35
+line_width = 0.38
+support_angle = 45
+raft_base_line_spacing = 1.6
+raft_base_line_width = 0.8
+

resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.6_draft.inst.cfg

@@ -0,0 +1,46 @@
+[general]
+version = 2
+name = Draft Print
+definition = ultimaker2_extended_plus
+
+[metadata]
+type = quality
+material = generic_cpe_plus_ultimaker2_extended_plus_0.6_mm
+weight = 0
+quality_type = draft
+
+[values]
+support_xy_distance = 0.6
+speed_travel = 150
+support_z_distance = 0.22
+speed_wall_x = 25
+cool_min_speed = 8
+cool_fan_speed = 45
+raft_surface_thickness = 0.2
+raft_surface_line_width = 0.57
+raft_interface_line_spacing = 1.4
+raft_margin = 15
+speed_layer_0 = 30
+raft_airgap = 0.37
+infill_overlap = 5
+layer_height = 0.3
+raft_base_line_spacing = 2.4
+raft_interface_line_width = 1.2
+speed_wall_0 = 20
+cool_fan_speed_min = 25
+wall_thickness = 1.14
+support_pattern = lines
+support_infill_rate = 20
+speed_topbottom = 20
+support_enable = True
+infill_sparse_density = 35
+top_bottom_thickness = 0.75
+adhesion_type = raft
+line_width = 0.57
+layer_0_z_overlap = 0.22
+raft_base_line_width = 1.2
+speed_print = 25
+support_line_distance = 2.85
+support_angle = 45
+cool_min_layer_time = 3
+

resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.6_normal.inst.cfg

@@ -0,0 +1,46 @@
+[general]
+version = 2
+name = Normal Quality
+definition = ultimaker2_extended_plus
+
+[metadata]
+type = quality
+material = generic_cpe_plus_ultimaker2_extended_plus_0.6_mm
+weight = 0
+quality_type = normal
+
+[values]
+support_xy_distance = 0.6
+speed_travel = 150
+support_z_distance = 0.22
+speed_wall_x = 35
+cool_min_speed = 8
+cool_fan_speed = 45
+raft_surface_thickness = 0.2
+raft_surface_line_width = 0.57
+raft_interface_line_spacing = 1.4
+raft_margin = 15
+speed_layer_0 = 30
+raft_airgap = 0.37
+infill_overlap = 5
+layer_height = 0.22
+raft_base_line_spacing = 2.4
+raft_interface_line_width = 1.2
+speed_wall_0 = 30
+cool_fan_speed_min = 25
+wall_thickness = 1.14
+support_pattern = lines
+support_infill_rate = 20
+speed_topbottom = 20
+support_enable = True
+infill_sparse_density = 35
+top_bottom_thickness = 0.75
+adhesion_type = raft
+line_width = 0.57
+layer_0_z_overlap = 0.22
+raft_base_line_width = 1.2
+speed_print = 35
+support_line_distance = 2.85
+support_angle = 45
+cool_min_layer_time = 3
+

resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.8_draft.inst.cfg

@@ -0,0 +1,40 @@
+[general]
+version = 2
+name = Draft Print
+definition = ultimaker2_extended_plus
+
+[metadata]
+type = quality
+material = generic_cpe_plus_ultimaker2_extended_plus_0.8_mm
+weight = 0
+quality_type = draft
+
+[values]
+support_z_distance = 0.26
+speed_wall_x = 25
+cool_fan_speed = 50
+raft_surface_thickness = 0.2
+raft_surface_line_width = 0.7
+raft_interface_line_spacing = 1.8
+raft_airgap = 0.37
+infill_overlap = 5
+layer_height = 0.3
+raft_interface_line_width = 1.6
+top_bottom_thickness = 1.2
+cool_fan_speed_min = 25
+brim_line_count = 10
+support_pattern = lines
+support_infill_rate = 20
+speed_topbottom = 20
+support_enable = True
+raft_margin = 15
+adhesion_type = raft
+infill_sparse_density = 40
+layer_0_z_overlap = 0.22
+raft_base_line_width = 1.6
+speed_print = 25
+speed_wall_0 = 20
+support_angle = 45
+cool_min_layer_time = 3
+wall_thickness = 2.1
+

resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.8_normal.inst.cfg

@@ -0,0 +1,40 @@
+[general]
+version = 2
+name = Normal Quality
+definition = ultimaker2_extended_plus
+
+[metadata]
+type = quality
+material = generic_cpe_plus_ultimaker2_extended_plus_0.8_mm
+weight = 0
+quality_type = normal
+
+[values]
+support_z_distance = 0.26
+speed_wall_x = 30
+cool_fan_speed = 50
+raft_surface_thickness = 0.2
+raft_surface_line_width = 0.7
+raft_interface_line_spacing = 1.8
+raft_airgap = 0.37
+infill_overlap = 5
+layer_height = 0.2
+raft_interface_line_width = 1.6
+top_bottom_thickness = 1.2
+cool_fan_speed_min = 25
+brim_line_count = 10
+support_pattern = lines
+support_infill_rate = 20
+speed_topbottom = 20
+support_enable = True
+raft_margin = 15
+adhesion_type = raft
+infill_sparse_density = 40
+layer_0_z_overlap = 0.22
+raft_base_line_width = 1.6
+speed_print = 30
+speed_wall_0 = 20
+support_angle = 45
+cool_min_layer_time = 3
+wall_thickness = 2.1
+

resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.25_high.inst.cfg

@@ -0,0 +1,43 @@
+[general]
+version = 2
+name = High Quality
+definition = ultimaker2_extended_plus
+
+[metadata]
+type = quality
+material = generic_nylon_ultimaker2_extended_plus_0.25_mm
+weight = 0
+quality_type = high
+
+[values]
+support_xy_distance = 0.6
+speed_travel = 150
+cool_fan_speed = 60
+support_z_distance = 0.45
+speed_wall_x = 40
+cool_min_speed = 15
+raft_surface_line_width = 0.2
+raft_interface_line_width = 0.5
+brim_line_count = 8
+raft_margin = 15
+speed_layer_0 = 30
+raft_airgap = 0.15
+infill_overlap = 5
+layer_height = 0.06
+raft_interface_line_spacing = 0.7
+speed_support = 40
+top_bottom_thickness = 1.2
+cool_fan_speed_min = 35
+wall_thickness = 1
+support_pattern = lines
+support_infill_rate = 20
+speed_topbottom = 35
+support_enable = True
+retraction_hop_enabled = 0.2
+speed_wall_0 = 20
+adhesion_type = raft
+infill_sparse_density = 25
+layer_0_z_overlap = 0.1
+raft_base_line_width = 0.5
+speed_print = 40
+

resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.25_normal.inst.cfg

@@ -0,0 +1,43 @@
+[general]
+version = 2
+name = Normal Quality
+definition = ultimaker2_extended_plus
+
+[metadata]
+type = quality
+material = generic_nylon_ultimaker2_extended_plus_0.25_mm
+weight = 0
+quality_type = normal
+
+[values]
+support_xy_distance = 0.6
+speed_travel = 150
+cool_fan_speed = 60
+support_z_distance = 0.45
+speed_wall_x = 40
+cool_min_speed = 15
+raft_surface_line_width = 0.2
+raft_interface_line_width = 0.5
+brim_line_count = 8
+raft_margin = 15
+speed_layer_0 = 30
+raft_airgap = 0.15
+infill_overlap = 5
+layer_height = 0.1
+raft_interface_line_spacing = 0.7
+speed_support = 40
+top_bottom_thickness = 1.2
+cool_fan_speed_min = 35
+wall_thickness = 1
+support_pattern = lines
+support_infill_rate = 20
+speed_topbottom = 35
+support_enable = True
+retraction_hop_enabled = 0.2
+speed_wall_0 = 20
+adhesion_type = raft
+infill_sparse_density = 25
+layer_0_z_overlap = 0.1
+raft_base_line_width = 0.5
+speed_print = 40
+

resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.4_fast.inst.cfg

@@ -0,0 +1,42 @@
+[general]
+version = 2
+name = Fast Print
+definition = ultimaker2_extended_plus
+
+[metadata]
+type = quality
+material = generic_nylon_ultimaker2_extended_plus_0.4_mm
+weight = 0
+quality_type = fast
+
+[values]
+support_xy_distance = 0.6
+speed_travel = 150
+support_z_distance = 0.45
+raft_interface_line_spacing = 1
+cool_min_speed = 15
+raft_surface_thickness = 0.15
+raft_surface_line_width = 0.5
+speed_layer_0 = 30
+raft_airgap = 0.57
+infill_overlap = 5
+layer_height = 0.2
+raft_interface_line_width = 0.8
+top_bottom_thickness = 0.75
+cool_fan_speed_min = 35
+wall_thickness = 1.06
+support_pattern = lines
+support_infill_rate = 25
+speed_topbottom = 20
+support_enable = True
+speed_wall = 40
+raft_margin = 15
+adhesion_type = raft
+infill_sparse_density = 30
+layer_0_z_overlap = 0.22
+raft_base_line_spacing = 1.6
+speed_print = 45
+support_angle = 45
+cool_min_layer_time = 3
+raft_base_line_width = 0.8
+

resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.4_normal.inst.cfg

@@ -0,0 +1,41 @@
+[general]
+version = 2
+name = Normal Quality
+definition = ultimaker2_extended_plus
+
+[metadata]
+type = quality
+material = generic_nylon_ultimaker2_extended_plus_0.4_mm
+weight = 0
+quality_type = normal
+
+[values]
+support_xy_distance = 0.6
+speed_travel = 150
+support_z_distance = 0.45
+raft_interface_line_spacing = 1
+cool_min_speed = 15
+raft_surface_thickness = 0.15
+raft_surface_line_width = 0.5
+speed_layer_0 = 30
+raft_airgap = 0.57
+infill_overlap = 5
+layer_height = 0.15
+raft_interface_line_width = 0.8
+top_bottom_thickness = 0.75
+cool_fan_speed_min = 35
+wall_thickness = 1.06
+support_pattern = lines
+support_infill_rate = 25
+support_enable = True
+speed_wall = 40
+raft_margin = 15
+adhesion_type = raft
+infill_sparse_density = 30
+layer_0_z_overlap = 0.22
+raft_base_line_spacing = 1.6
+speed_print = 45
+support_angle = 45
+cool_min_layer_time = 3
+raft_base_line_width = 0.8
+

resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.6_fast.inst.cfg

@@ -0,0 +1,46 @@
+[general]
+version = 2
+name = Fast Print
+definition = ultimaker2_extended_plus
+
+[metadata]
+type = quality
+material = generic_nylon_ultimaker2_extended_plus_0.6_mm
+weight = 0
+quality_type = fast
+
+[values]
+support_xy_distance = 0.7
+speed_travel = 150
+speed_wall_x = 40
+cool_min_speed = 15
+support_top_distance = 0.55
+raft_surface_line_width = 0.6
+raft_surface_thickness = 0.15
+brim_line_count = 8
+speed_layer_0 = 30
+raft_interface_line_spacing = 1.4
+infill_overlap = 5
+layer_height = 0.3
+raft_interface_line_width = 1.2
+speed_support = 40
+speed_wall_0 = 15
+cool_fan_speed_min = 35
+wall_thickness = 1.2
+support_pattern = lines
+support_infill_rate = 25
+speed_topbottom = 35
+support_enable = True
+retraction_hop_enabled = 0.2
+support_bottom_distance = 0.55
+raft_margin = 15
+adhesion_type = raft
+infill_sparse_density = 35
+layer_0_z_overlap = 0.22
+top_bottom_thickness = 1.2
+speed_print = 55
+raft_airgap = 0.44
+support_angle = 45
+raft_base_line_spacing = 2.4
+raft_base_line_width = 1.2
+

resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.6_normal.inst.cfg

@@ -0,0 +1,45 @@
+[general]
+version = 2
+name = Normal Quality
+definition = ultimaker2_extended_plus
+
+[metadata]
+type = quality
+material = generic_nylon_ultimaker2_extended_plus_0.6_mm
+weight = 0
+quality_type = normal
+
+[values]
+support_xy_distance = 0.7
+speed_travel = 150
+support_z_distance = 0.55
+speed_wall_x = 40
+cool_min_speed = 15
+raft_surface_line_width = 0.6
+raft_surface_thickness = 0.15
+brim_line_count = 8
+speed_layer_0 = 30
+raft_interface_line_spacing = 1.4
+infill_overlap = 5
+layer_height = 0.15
+raft_interface_line_width = 1.2
+speed_support = 40
+speed_wall_0 = 15
+cool_fan_speed_min = 35
+wall_thickness = 1.2
+support_pattern = lines
+support_infill_rate = 25
+speed_topbottom = 35
+support_enable = True
+retraction_hop_enabled = 0.2
+raft_margin = 15
+adhesion_type = raft
+infill_sparse_density = 35
+layer_0_z_overlap = 0.22
+top_bottom_thickness = 1.2
+speed_print = 55
+raft_airgap = 0.44
+support_angle = 45
+raft_base_line_spacing = 2.4
+raft_base_line_width = 1.2
+

resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.8_draft.inst.cfg

@@ -0,0 +1,46 @@
+[general]
+version = 2
+name = Draft Print
+definition = ultimaker2_extended_plus
+
+[metadata]
+type = quality
+material = generic_nylon_ultimaker2_extended_plus_0.8_mm
+weight = 0
+quality_type = draft
+
+[values]
+support_xy_distance = 0.75
+speed_travel = 150
+support_z_distance = 0.5
+speed_wall_x = 40
+cool_min_speed = 15
+brim_line_count = 8
+support_top_distance = 0.5
+raft_surface_thickness = 0.2
+wall_thickness = 2.4
+raft_margin = 15
+speed_layer_0 = 30
+raft_airgap = 0.44
+infill_overlap = 5
+layer_height = 0.3
+raft_interface_line_width = 1.6
+speed_support = 40
+speed_wall_0 = 15
+cool_fan_speed_min = 35
+raft_surface_line_width = 0.7
+support_pattern = lines
+support_infill_rate = 25
+speed_topbottom = 35
+support_enable = True
+retraction_hop_enabled = 0.2
+support_bottom_distance = 0.65
+top_bottom_thickness = 1.2
+adhesion_type = raft
+infill_sparse_density = 40
+layer_0_z_overlap = 0.25
+raft_base_line_width = 1.6
+speed_print = 55
+support_angle = 45
+raft_interface_line_spacing = 1.8
+

resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.8_normal.inst.cfg

@@ -0,0 +1,46 @@
+[general]
+version = 2
+name = Normal Quality
+definition = ultimaker2_extended_plus
+
+[metadata]
+type = quality
+material = generic_nylon_ultimaker2_extended_plus_0.8_mm
+weight = 0
+quality_type = normal
+
+[values]
+support_xy_distance = 0.75
+speed_travel = 150
+support_z_distance = 0.5
+speed_wall_x = 40
+cool_min_speed = 15
+brim_line_count = 8
+support_top_distance = 0.5
+raft_surface_thickness = 0.2
+wall_thickness = 2.4
+raft_margin = 15
+speed_layer_0 = 30
+raft_airgap = 0.44
+infill_overlap = 5
+layer_height = 0.2
+raft_interface_line_width = 1.6
+speed_support = 40
+speed_wall_0 = 15
+cool_fan_speed_min = 35
+raft_surface_line_width = 0.7
+support_pattern = lines
+support_infill_rate = 25
+speed_topbottom = 35
+support_enable = True
+retraction_hop_enabled = 0.2
+support_bottom_distance = 0.65
+top_bottom_thickness = 1.2
+adhesion_type = raft
+infill_sparse_density = 40
+layer_0_z_overlap = 0.25
+raft_base_line_width = 1.6
+speed_print = 55
+support_angle = 45
+raft_interface_line_spacing = 1.8
+

resources/quality/ultimaker2_extended_plus/um2ep_pc_0.25_high.inst.cfg

@@ -0,0 +1,36 @@
+[general]
+version = 2
+name = High Quality
+definition = ultimaker2_extended_plus
+
+[metadata]
+type = quality
+material = generic_pc_ultimaker2_extended_plus_0.25_mm
+weight = 0
+quality_type = high
+
+[values]
+support_z_distance = 0.19
+raft_interface_line_spacing = 0.7
+cool_min_speed = 15
+cool_fan_speed = 50
+raft_surface_line_width = 0.2
+wall_thickness = 0.88
+raft_airgap = 0.5
+infill_overlap = 5
+layer_height = 0.06
+raft_interface_line_width = 0.5
+cool_fan_speed_min = 0
+brim_line_count = 32
+support_pattern = lines
+support_infill_rate = 20
+support_enable = True
+raft_margin = 15
+adhesion_type = raft
+infill_sparse_density = 25
+layer_0_z_overlap = 0.22
+cool_min_layer_time = 2
+speed_print = 30
+raft_base_line_spacing = 1
+raft_base_line_width = 0.5
+

resources/quality/ultimaker2_extended_plus/um2ep_pc_0.25_normal.inst.cfg

@@ -0,0 +1,36 @@
+[general]
+version = 2
+name = Normal Quality
+definition = ultimaker2_extended_plus
+
+[metadata]
+type = quality
+material = generic_pc_ultimaker2_extended_plus_0.25_mm
+weight = 0
+quality_type = normal
+
+[values]
+support_z_distance = 0.19
+raft_interface_line_spacing = 0.7
+cool_min_speed = 15
+cool_fan_speed = 50
+raft_surface_line_width = 0.2
+wall_thickness = 0.88
+raft_airgap = 0.5
+infill_overlap = 5
+layer_height = 0.1
+raft_interface_line_width = 0.5
+cool_fan_speed_min = 0
+brim_line_count = 32
+support_pattern = lines
+support_infill_rate = 20
+support_enable = True
+raft_margin = 15
+adhesion_type = raft
+infill_sparse_density = 25
+layer_0_z_overlap = 0.22
+cool_min_layer_time = 2
+speed_print = 30
+raft_base_line_spacing = 1
+raft_base_line_width = 0.5
+

resources/quality/ultimaker2_extended_plus/um2ep_pc_0.4_fast.inst.cfg

@@ -0,0 +1,37 @@
+[general]
+version = 2
+name = Fast Print
+definition = ultimaker2_extended_plus
+
+[metadata]
+type = quality
+material = generic_pc_ultimaker2_extended_plus_0.4_mm
+weight = 0
+quality_type = fast
+
+[values]
+speed_wall_x = 30
+support_z_distance = 0.19
+raft_airgap = 0.57
+cool_min_speed = 8
+cool_fan_speed = 50
+raft_interface_line_spacing = 1
+infill_overlap = 5
+layer_height = 0.2
+raft_interface_line_width = 0.8
+speed_wall_0 = 20
+cool_fan_speed_min = 0
+wall_thickness = 1.2
+support_pattern = lines
+support_infill_rate = 20
+support_enable = True
+raft_margin = 15
+adhesion_type = raft
+infill_sparse_density = 30
+layer_0_z_overlap = 0.22
+cool_min_layer_time = 3
+speed_print = 45
+support_angle = 45
+raft_base_line_spacing = 1.6
+raft_base_line_width = 0.8
+

resources/quality/ultimaker2_extended_plus/um2ep_pc_0.4_normal.inst.cfg

@@ -0,0 +1,37 @@
+[general]
+version = 2
+name = Normal Quality
+definition = ultimaker2_extended_plus
+
+[metadata]
+type = quality
+material = generic_pc_ultimaker2_extended_plus_0.4_mm
+weight = 0
+quality_type = normal
+
+[values]
+speed_wall_x = 30
+support_z_distance = 0.19
+raft_airgap = 0.57
+cool_min_speed = 8
+cool_fan_speed = 50
+raft_interface_line_spacing = 1
+infill_overlap = 5
+layer_height = 0.1
+raft_interface_line_width = 0.8
+speed_wall_0 = 20
+cool_fan_speed_min = 0
+wall_thickness = 1.2
+support_pattern = lines
+support_infill_rate = 20
+support_enable = True
+raft_margin = 15
+adhesion_type = raft
+infill_sparse_density = 30
+layer_0_z_overlap = 0.22
+cool_min_layer_time = 3
+speed_print = 45
+support_angle = 45
+raft_base_line_spacing = 1.6
+raft_base_line_width = 0.8
+

resources/quality/ultimaker2_extended_plus/um2ep_pc_0.6_fast.inst.cfg

@@ -0,0 +1,44 @@
+[general]
+version = 2
+name = Fast Print
+definition = ultimaker2_extended_plus
+
+[metadata]
+type = quality
+material = generic_pc_ultimaker2_extended_plus_0.6_mm
+weight = 0
+quality_type = fast
+
+[values]
+speed_travel = 150
+support_z_distance = 0.21
+speed_wall_x = 40
+cool_min_speed = 8
+cool_fan_speed = 50
+raft_surface_thickness = 0.15
+raft_surface_line_width = 0.6
+raft_interface_line_spacing = 1.4
+speed_layer_0 = 30
+raft_airgap = 0.52
+infill_overlap = 5
+layer_height = 0.3
+raft_interface_line_width = 1.2
+raft_margin = 15
+cool_fan_speed_min = 0
+wall_thickness = 1.06
+support_pattern = lines
+support_infill_rate = 20
+speed_topbottom = 20
+support_enable = True
+top_bottom_thickness = 0.75
+adhesion_type = raft
+infill_sparse_density = 35
+layer_0_z_overlap = 0.22
+raft_base_line_spacing = 2.4
+speed_print = 45
+support_line_distance = 3.5333
+speed_wall_0 = 30
+support_angle = 45
+cool_min_layer_time = 3
+raft_base_line_width = 1.2
+

resources/quality/ultimaker2_extended_plus/um2ep_pc_0.6_normal.inst.cfg

@@ -0,0 +1,44 @@
+[general]
+version = 2
+name = Normal Quality
+definition = ultimaker2_extended_plus
+
+[metadata]
+type = quality
+material = generic_pc_ultimaker2_extended_plus_0.6_mm
+weight = 0
+quality_type = normal
+
+[values]
+speed_travel = 150
+support_z_distance = 0.21
+speed_wall_x = 40
+cool_min_speed = 8
+cool_fan_speed = 50
+raft_surface_thickness = 0.15
+raft_surface_line_width = 0.6
+raft_interface_line_spacing = 1.4
+speed_layer_0 = 30
+raft_airgap = 0.52
+infill_overlap = 5
+layer_height = 0.15
+raft_interface_line_width = 1.2
+raft_margin = 15
+cool_fan_speed_min = 0
+wall_thickness = 1.06
+support_pattern = lines
+support_infill_rate = 20
+speed_topbottom = 20
+support_enable = True
+top_bottom_thickness = 0.75
+adhesion_type = raft
+infill_sparse_density = 35
+layer_0_z_overlap = 0.22
+raft_base_line_spacing = 2.4
+speed_print = 45
+support_line_distance = 3.5333
+speed_wall_0 = 30
+support_angle = 45
+cool_min_layer_time = 3
+raft_base_line_width = 1.2
+

resources/quality/ultimaker2_extended_plus/um2ep_pc_0.8_draft.inst.cfg

@@ -0,0 +1,37 @@
+[general]
+version = 2
+name = Draft Print
+definition = ultimaker2_extended_plus
+
+[metadata]
+type = quality
+material = generic_pc_ultimaker2_extended_plus_0.8_mm
+weight = 0
+quality_type = draft
+
+[values]
+support_z_distance = 0.26
+raft_airgap = 0.47
+cool_fan_speed = 50
+raft_surface_line_width = 0.7
+raft_surface_thickness = 0.2
+brim_line_count = 10
+raft_interface_line_spacing = 1.8
+infill_overlap = 5
+layer_height = 0.5
+raft_interface_line_width = 1.6
+top_bottom_thickness = 2.0
+cool_fan_speed_min = 25
+wall_thickness = 2.1
+support_pattern = lines
+support_infill_rate = 20
+support_enable = True
+raft_margin = 15
+adhesion_type = raft
+infill_sparse_density = 40
+layer_0_z_overlap = 0.22
+raft_base_line_width = 1.6
+speed_print = 40
+support_angle = 45
+cool_min_layer_time = 3
+

resources/quality/ultimaker2_extended_plus/um2ep_pc_0.8_normal.inst.cfg

@@ -0,0 +1,37 @@
+[general]
+version = 2
+name = Normal Quality
+definition = ultimaker2_extended_plus
+
+[metadata]
+type = quality
+material = generic_pc_ultimaker2_extended_plus_0.8_mm
+weight = 0
+quality_type = normal
+
+[values]
+support_z_distance = 0.26
+raft_airgap = 0.47
+cool_fan_speed = 50
+raft_surface_line_width = 0.7
+raft_surface_thickness = 0.2
+brim_line_count = 10
+raft_interface_line_spacing = 1.8
+infill_overlap = 5
+layer_height = 0.2
+raft_interface_line_width = 1.6
+top_bottom_thickness = 1.2
+cool_fan_speed_min = 25
+wall_thickness = 2.1
+support_pattern = lines
+support_infill_rate = 20
+support_enable = True
+raft_margin = 15
+adhesion_type = raft
+infill_sparse_density = 40
+layer_0_z_overlap = 0.22
+raft_base_line_width = 1.6
+speed_print = 40
+support_angle = 45
+cool_min_layer_time = 3
+

resources/quality/ultimaker2_extended_plus/um2ep_tpu_0.25_high.inst.cfg

@@ -0,0 +1,42 @@
+[general]
+version = 2
+name = High Quality
+definition = ultimaker2_extended_plus
+
+[metadata]
+type = quality
+material = generic_tpu_ultimaker2_extended_plus_0.25_mm
+weight = 0
+quality_type = high
+
+[values]
+support_xy_distance = 0.6
+cool_min_speed = 15
+support_infill_rate = 25
+speed_wall_0 = 15
+layer_0_z_overlap = 0.1
+cool_min_layer_time = 7
+speed_layer_0 = 30
+speed_print = 40
+wall_thickness = 0.88
+support_enable = True
+speed_topbottom = 35
+raft_surface_line_width = 0.2
+raft_base_line_spacing = 1
+top_bottom_thickness = 1.2
+layer_height = 0.06
+support_angle = 45
+infill_sparse_density = 10
+cool_fan_speed = 60
+speed_travel = 150
+speed_support = 40
+support_z_distance = 0.45
+cool_fan_speed_min = 35
+brim_line_count = 8
+retraction_hop_enabled = 0.2
+speed_wall_x = 38
+raft_airgap = 0.2
+raft_interface_line_spacing = 1
+adhesion_type = brim
+raft_interface_line_width = 0.2
+

resources/quality/ultimaker2_extended_plus/um2ep_tpu_0.4_normal.inst.cfg

@@ -0,0 +1,39 @@
+[general]
+version = 2
+name = Normal Quality
+definition = ultimaker2_extended_plus
+
+[metadata]
+type = quality
+material = generic_tpu_ultimaker2_extended_plus_0.4_mm
+weight = 0
+quality_type = normal
+
+[values]
+support_xy_distance = 0.65
+speed_travel = 150
+support_z_distance = 0.45
+speed_wall_x = 35
+cool_min_speed = 15
+cool_fan_speed = 60
+retraction_hop_enabled = 0.2
+brim_line_count = 8
+speed_layer_0 = 30
+raft_interface_line_spacing = 1
+raft_base_line_spacing = 2
+speed_support = 40
+raft_margin = 12
+cool_fan_speed_min = 35
+wall_thickness = 1.05
+support_infill_rate = 25
+speed_topbottom = 35
+support_enable = True
+speed_wall_0 = 20
+adhesion_type = brim
+infill_sparse_density = 10
+top_bottom_thickness = 1.2
+speed_print = 40
+support_angle = 45
+cool_min_layer_time = 10
+raft_base_line_width = 0.8
+

resources/quality/ultimaker2_extended_plus/um2ep_tpu_0.6_fast.inst.cfg

@@ -0,0 +1,44 @@
+[general]
+version = 2
+name = Fast Print
+definition = ultimaker2_extended_plus
+
+[metadata]
+type = quality
+material = generic_tpu_ultimaker2_extended_plus_0.6_mm
+weight = 0
+quality_type = fast
+
+[values]
+support_xy_distance = 0.7
+raft_base_line_width = 0.6
+cool_min_speed = 15
+line_width = 0.57
+support_infill_rate = 25
+speed_wall_0 = 15
+wall_thickness = 1.14
+raft_base_line_spacing = 1.2
+speed_layer_0 = 30
+raft_margin = 15
+speed_travel = 150
+raft_surface_line_width = 0.5
+layer_height = 0.12
+raft_interface_line_width = 0.57
+speed_print = 45
+top_bottom_thickness = 1.2
+speed_topbottom = 35
+layer_0_z_overlap = 0.12
+support_angle = 45
+infill_sparse_density = 10
+cool_fan_speed = 60
+speed_support = 40
+support_z_distance = 0.45
+cool_fan_speed_min = 35
+brim_line_count = 8
+retraction_hop_enabled = 0.2
+speed_wall_x = 40
+support_enable = True
+raft_interface_line_spacing = 1.2
+adhesion_type = brim
+raft_airgap = 0.24
+