From 94b8e1aff09fc3cc7d3179076e520604b17f4136 Mon Sep 17 00:00:00 2001 From: fieldOfView Date: Thu, 25 Aug 2016 17:07:28 +0200 Subject: [PATCH] Add UM2Ex+ profiles for Nylon, PC, CPE+ and TPU Contributes to CURA-2138. Ideally these would not have to be copies from the UM2+ profiles. This should be picked up for CURA-1780 --- .../um2ep_cpep_0.4_draft.inst.cfg | 42 +++++++++++++++++ .../um2ep_cpep_0.4_normal.inst.cfg | 42 +++++++++++++++++ .../um2ep_cpep_0.6_draft.inst.cfg | 46 +++++++++++++++++++ .../um2ep_cpep_0.6_normal.inst.cfg | 46 +++++++++++++++++++ .../um2ep_cpep_0.8_draft.inst.cfg | 40 ++++++++++++++++ .../um2ep_cpep_0.8_normal.inst.cfg | 40 ++++++++++++++++ .../um2ep_nylon_0.25_high.inst.cfg | 43 +++++++++++++++++ .../um2ep_nylon_0.25_normal.inst.cfg | 43 +++++++++++++++++ .../um2ep_nylon_0.4_fast.inst.cfg | 42 +++++++++++++++++ .../um2ep_nylon_0.4_normal.inst.cfg | 41 +++++++++++++++++ .../um2ep_nylon_0.6_fast.inst.cfg | 46 +++++++++++++++++++ .../um2ep_nylon_0.6_normal.inst.cfg | 45 ++++++++++++++++++ .../um2ep_nylon_0.8_draft.inst.cfg | 46 +++++++++++++++++++ .../um2ep_nylon_0.8_normal.inst.cfg | 46 +++++++++++++++++++ .../um2ep_pc_0.25_high.inst.cfg | 36 +++++++++++++++ .../um2ep_pc_0.25_normal.inst.cfg | 36 +++++++++++++++ .../um2ep_pc_0.4_fast.inst.cfg | 37 +++++++++++++++ .../um2ep_pc_0.4_normal.inst.cfg | 37 +++++++++++++++ .../um2ep_pc_0.6_fast.inst.cfg | 44 ++++++++++++++++++ .../um2ep_pc_0.6_normal.inst.cfg | 44 ++++++++++++++++++ .../um2ep_pc_0.8_draft.inst.cfg | 37 +++++++++++++++ .../um2ep_pc_0.8_normal.inst.cfg | 37 +++++++++++++++ .../um2ep_tpu_0.25_high.inst.cfg | 42 +++++++++++++++++ .../um2ep_tpu_0.4_normal.inst.cfg | 39 ++++++++++++++++ .../um2ep_tpu_0.6_fast.inst.cfg | 44 ++++++++++++++++++ 25 files changed, 1041 insertions(+) create mode 100644 resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.4_draft.inst.cfg create mode 100644 resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.4_normal.inst.cfg create mode 100644 resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.6_draft.inst.cfg create mode 100644 resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.6_normal.inst.cfg create mode 100644 resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.8_draft.inst.cfg create mode 100644 resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.8_normal.inst.cfg create mode 100644 resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.25_high.inst.cfg create mode 100644 resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.25_normal.inst.cfg create mode 100644 resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.4_fast.inst.cfg create mode 100644 resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.4_normal.inst.cfg create mode 100644 resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.6_fast.inst.cfg create mode 100644 resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.6_normal.inst.cfg create mode 100644 resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.8_draft.inst.cfg create mode 100644 resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.8_normal.inst.cfg create mode 100644 resources/quality/ultimaker2_extended_plus/um2ep_pc_0.25_high.inst.cfg create mode 100644 resources/quality/ultimaker2_extended_plus/um2ep_pc_0.25_normal.inst.cfg create mode 100644 resources/quality/ultimaker2_extended_plus/um2ep_pc_0.4_fast.inst.cfg create mode 100644 resources/quality/ultimaker2_extended_plus/um2ep_pc_0.4_normal.inst.cfg create mode 100644 resources/quality/ultimaker2_extended_plus/um2ep_pc_0.6_fast.inst.cfg create mode 100644 resources/quality/ultimaker2_extended_plus/um2ep_pc_0.6_normal.inst.cfg create mode 100644 resources/quality/ultimaker2_extended_plus/um2ep_pc_0.8_draft.inst.cfg create mode 100644 resources/quality/ultimaker2_extended_plus/um2ep_pc_0.8_normal.inst.cfg create mode 100644 resources/quality/ultimaker2_extended_plus/um2ep_tpu_0.25_high.inst.cfg create mode 100644 resources/quality/ultimaker2_extended_plus/um2ep_tpu_0.4_normal.inst.cfg create mode 100644 resources/quality/ultimaker2_extended_plus/um2ep_tpu_0.6_fast.inst.cfg diff --git a/resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.4_draft.inst.cfg b/resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.4_draft.inst.cfg new file mode 100644 index 0000000000..a429cb87d2 --- /dev/null +++ b/resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.4_draft.inst.cfg @@ -0,0 +1,42 @@ +[general] +version = 2 +name = Draft Print +definition = ultimaker2_extended_plus + +[metadata] +type = quality +material = generic_cpe_plus_ultimaker2_extended_plus_0.4_mm +weight = 0 +quality_type = draft + +[values] +speed_wall_x = 25 +support_z_distance = 0.26 +raft_interface_line_spacing = 1 +cool_min_speed = 8 +cool_fan_speed = 50 +wall_thickness = 1.14 +raft_margin = 15 +speed_layer_0 = 15 +raft_airgap = 0.37 +infill_overlap = 5 +layer_height = 0.2 +raft_interface_line_width = 0.8 +top_bottom_thickness = 1.5 +cool_fan_speed_min = 25 +raft_surface_line_width = 0.38 +support_pattern = lines +support_infill_rate = 20 +speed_topbottom = 20 +support_enable = True +speed_wall_0 = 20 +adhesion_type = raft +infill_sparse_density = 30 +layer_0_z_overlap = 0.22 +cool_min_layer_time = 3 +speed_print = 25 +line_width = 0.38 +support_angle = 45 +raft_base_line_spacing = 1.6 +raft_base_line_width = 0.8 + diff --git a/resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.4_normal.inst.cfg b/resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.4_normal.inst.cfg new file mode 100644 index 0000000000..5da95cb418 --- /dev/null +++ b/resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.4_normal.inst.cfg @@ -0,0 +1,42 @@ +[general] +version = 2 +name = Normal Quality +definition = ultimaker2_extended_plus + +[metadata] +type = quality +material = generic_cpe_plus_ultimaker2_extended_plus_0.4_mm +weight = 0 +quality_type = normal + +[values] +speed_wall_x = 30 +support_z_distance = 0.26 +raft_interface_line_spacing = 1 +cool_min_speed = 8 +cool_fan_speed = 50 +wall_thickness = 1.14 +raft_margin = 15 +speed_layer_0 = 15 +raft_airgap = 0.37 +infill_overlap = 5 +layer_height = 0.15 +raft_interface_line_width = 0.8 +top_bottom_thickness = 1.5 +cool_fan_speed_min = 25 +raft_surface_line_width = 0.38 +support_pattern = lines +support_infill_rate = 20 +speed_topbottom = 20 +support_enable = True +speed_wall_0 = 20 +adhesion_type = raft +infill_sparse_density = 30 +layer_0_z_overlap = 0.22 +cool_min_layer_time = 3 +speed_print = 35 +line_width = 0.38 +support_angle = 45 +raft_base_line_spacing = 1.6 +raft_base_line_width = 0.8 + diff --git a/resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.6_draft.inst.cfg b/resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.6_draft.inst.cfg new file mode 100644 index 0000000000..ca21d7925f --- /dev/null +++ b/resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.6_draft.inst.cfg @@ -0,0 +1,46 @@ +[general] +version = 2 +name = Draft Print +definition = ultimaker2_extended_plus + +[metadata] +type = quality +material = generic_cpe_plus_ultimaker2_extended_plus_0.6_mm +weight = 0 +quality_type = draft + +[values] +support_xy_distance = 0.6 +speed_travel = 150 +support_z_distance = 0.22 +speed_wall_x = 25 +cool_min_speed = 8 +cool_fan_speed = 45 +raft_surface_thickness = 0.2 +raft_surface_line_width = 0.57 +raft_interface_line_spacing = 1.4 +raft_margin = 15 +speed_layer_0 = 30 +raft_airgap = 0.37 +infill_overlap = 5 +layer_height = 0.3 +raft_base_line_spacing = 2.4 +raft_interface_line_width = 1.2 +speed_wall_0 = 20 +cool_fan_speed_min = 25 +wall_thickness = 1.14 +support_pattern = lines +support_infill_rate = 20 +speed_topbottom = 20 +support_enable = True +infill_sparse_density = 35 +top_bottom_thickness = 0.75 +adhesion_type = raft +line_width = 0.57 +layer_0_z_overlap = 0.22 +raft_base_line_width = 1.2 +speed_print = 25 +support_line_distance = 2.85 +support_angle = 45 +cool_min_layer_time = 3 + diff --git a/resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.6_normal.inst.cfg b/resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.6_normal.inst.cfg new file mode 100644 index 0000000000..4d994520f4 --- /dev/null +++ b/resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.6_normal.inst.cfg @@ -0,0 +1,46 @@ +[general] +version = 2 +name = Normal Quality +definition = ultimaker2_extended_plus + +[metadata] +type = quality +material = generic_cpe_plus_ultimaker2_extended_plus_0.6_mm +weight = 0 +quality_type = normal + +[values] +support_xy_distance = 0.6 +speed_travel = 150 +support_z_distance = 0.22 +speed_wall_x = 35 +cool_min_speed = 8 +cool_fan_speed = 45 +raft_surface_thickness = 0.2 +raft_surface_line_width = 0.57 +raft_interface_line_spacing = 1.4 +raft_margin = 15 +speed_layer_0 = 30 +raft_airgap = 0.37 +infill_overlap = 5 +layer_height = 0.22 +raft_base_line_spacing = 2.4 +raft_interface_line_width = 1.2 +speed_wall_0 = 30 +cool_fan_speed_min = 25 +wall_thickness = 1.14 +support_pattern = lines +support_infill_rate = 20 +speed_topbottom = 20 +support_enable = True +infill_sparse_density = 35 +top_bottom_thickness = 0.75 +adhesion_type = raft +line_width = 0.57 +layer_0_z_overlap = 0.22 +raft_base_line_width = 1.2 +speed_print = 35 +support_line_distance = 2.85 +support_angle = 45 +cool_min_layer_time = 3 + diff --git a/resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.8_draft.inst.cfg b/resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.8_draft.inst.cfg new file mode 100644 index 0000000000..9708283277 --- /dev/null +++ b/resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.8_draft.inst.cfg @@ -0,0 +1,40 @@ +[general] +version = 2 +name = Draft Print +definition = ultimaker2_extended_plus + +[metadata] +type = quality +material = generic_cpe_plus_ultimaker2_extended_plus_0.8_mm +weight = 0 +quality_type = draft + +[values] +support_z_distance = 0.26 +speed_wall_x = 25 +cool_fan_speed = 50 +raft_surface_thickness = 0.2 +raft_surface_line_width = 0.7 +raft_interface_line_spacing = 1.8 +raft_airgap = 0.37 +infill_overlap = 5 +layer_height = 0.3 +raft_interface_line_width = 1.6 +top_bottom_thickness = 1.2 +cool_fan_speed_min = 25 +brim_line_count = 10 +support_pattern = lines +support_infill_rate = 20 +speed_topbottom = 20 +support_enable = True +raft_margin = 15 +adhesion_type = raft +infill_sparse_density = 40 +layer_0_z_overlap = 0.22 +raft_base_line_width = 1.6 +speed_print = 25 +speed_wall_0 = 20 +support_angle = 45 +cool_min_layer_time = 3 +wall_thickness = 2.1 + diff --git a/resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.8_normal.inst.cfg b/resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.8_normal.inst.cfg new file mode 100644 index 0000000000..81cbeac533 --- /dev/null +++ b/resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.8_normal.inst.cfg @@ -0,0 +1,40 @@ +[general] +version = 2 +name = Normal Quality +definition = ultimaker2_extended_plus + +[metadata] +type = quality +material = generic_cpe_plus_ultimaker2_extended_plus_0.8_mm +weight = 0 +quality_type = normal + +[values] +support_z_distance = 0.26 +speed_wall_x = 30 +cool_fan_speed = 50 +raft_surface_thickness = 0.2 +raft_surface_line_width = 0.7 +raft_interface_line_spacing = 1.8 +raft_airgap = 0.37 +infill_overlap = 5 +layer_height = 0.2 +raft_interface_line_width = 1.6 +top_bottom_thickness = 1.2 +cool_fan_speed_min = 25 +brim_line_count = 10 +support_pattern = lines +support_infill_rate = 20 +speed_topbottom = 20 +support_enable = True +raft_margin = 15 +adhesion_type = raft +infill_sparse_density = 40 +layer_0_z_overlap = 0.22 +raft_base_line_width = 1.6 +speed_print = 30 +speed_wall_0 = 20 +support_angle = 45 +cool_min_layer_time = 3 +wall_thickness = 2.1 + diff --git a/resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.25_high.inst.cfg b/resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.25_high.inst.cfg new file mode 100644 index 0000000000..5da1025685 --- /dev/null +++ b/resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.25_high.inst.cfg @@ -0,0 +1,43 @@ +[general] +version = 2 +name = High Quality +definition = ultimaker2_extended_plus + +[metadata] +type = quality +material = generic_nylon_ultimaker2_extended_plus_0.25_mm +weight = 0 +quality_type = high + +[values] +support_xy_distance = 0.6 +speed_travel = 150 +cool_fan_speed = 60 +support_z_distance = 0.45 +speed_wall_x = 40 +cool_min_speed = 15 +raft_surface_line_width = 0.2 +raft_interface_line_width = 0.5 +brim_line_count = 8 +raft_margin = 15 +speed_layer_0 = 30 +raft_airgap = 0.15 +infill_overlap = 5 +layer_height = 0.06 +raft_interface_line_spacing = 0.7 +speed_support = 40 +top_bottom_thickness = 1.2 +cool_fan_speed_min = 35 +wall_thickness = 1 +support_pattern = lines +support_infill_rate = 20 +speed_topbottom = 35 +support_enable = True +retraction_hop_enabled = 0.2 +speed_wall_0 = 20 +adhesion_type = raft +infill_sparse_density = 25 +layer_0_z_overlap = 0.1 +raft_base_line_width = 0.5 +speed_print = 40 + diff --git a/resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.25_normal.inst.cfg b/resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.25_normal.inst.cfg new file mode 100644 index 0000000000..dc123b03d2 --- /dev/null +++ b/resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.25_normal.inst.cfg @@ -0,0 +1,43 @@ +[general] +version = 2 +name = Normal Quality +definition = ultimaker2_extended_plus + +[metadata] +type = quality +material = generic_nylon_ultimaker2_extended_plus_0.25_mm +weight = 0 +quality_type = normal + +[values] +support_xy_distance = 0.6 +speed_travel = 150 +cool_fan_speed = 60 +support_z_distance = 0.45 +speed_wall_x = 40 +cool_min_speed = 15 +raft_surface_line_width = 0.2 +raft_interface_line_width = 0.5 +brim_line_count = 8 +raft_margin = 15 +speed_layer_0 = 30 +raft_airgap = 0.15 +infill_overlap = 5 +layer_height = 0.1 +raft_interface_line_spacing = 0.7 +speed_support = 40 +top_bottom_thickness = 1.2 +cool_fan_speed_min = 35 +wall_thickness = 1 +support_pattern = lines +support_infill_rate = 20 +speed_topbottom = 35 +support_enable = True +retraction_hop_enabled = 0.2 +speed_wall_0 = 20 +adhesion_type = raft +infill_sparse_density = 25 +layer_0_z_overlap = 0.1 +raft_base_line_width = 0.5 +speed_print = 40 + diff --git a/resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.4_fast.inst.cfg b/resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.4_fast.inst.cfg new file mode 100644 index 0000000000..807c630988 --- /dev/null +++ b/resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.4_fast.inst.cfg @@ -0,0 +1,42 @@ +[general] +version = 2 +name = Fast Print +definition = ultimaker2_extended_plus + +[metadata] +type = quality +material = generic_nylon_ultimaker2_extended_plus_0.4_mm +weight = 0 +quality_type = fast + +[values] +support_xy_distance = 0.6 +speed_travel = 150 +support_z_distance = 0.45 +raft_interface_line_spacing = 1 +cool_min_speed = 15 +raft_surface_thickness = 0.15 +raft_surface_line_width = 0.5 +speed_layer_0 = 30 +raft_airgap = 0.57 +infill_overlap = 5 +layer_height = 0.2 +raft_interface_line_width = 0.8 +top_bottom_thickness = 0.75 +cool_fan_speed_min = 35 +wall_thickness = 1.06 +support_pattern = lines +support_infill_rate = 25 +speed_topbottom = 20 +support_enable = True +speed_wall = 40 +raft_margin = 15 +adhesion_type = raft +infill_sparse_density = 30 +layer_0_z_overlap = 0.22 +raft_base_line_spacing = 1.6 +speed_print = 45 +support_angle = 45 +cool_min_layer_time = 3 +raft_base_line_width = 0.8 + diff --git a/resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.4_normal.inst.cfg b/resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.4_normal.inst.cfg new file mode 100644 index 0000000000..4cb32b6735 --- /dev/null +++ b/resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.4_normal.inst.cfg @@ -0,0 +1,41 @@ +[general] +version = 2 +name = Normal Quality +definition = ultimaker2_extended_plus + +[metadata] +type = quality +material = generic_nylon_ultimaker2_extended_plus_0.4_mm +weight = 0 +quality_type = normal + +[values] +support_xy_distance = 0.6 +speed_travel = 150 +support_z_distance = 0.45 +raft_interface_line_spacing = 1 +cool_min_speed = 15 +raft_surface_thickness = 0.15 +raft_surface_line_width = 0.5 +speed_layer_0 = 30 +raft_airgap = 0.57 +infill_overlap = 5 +layer_height = 0.15 +raft_interface_line_width = 0.8 +top_bottom_thickness = 0.75 +cool_fan_speed_min = 35 +wall_thickness = 1.06 +support_pattern = lines +support_infill_rate = 25 +support_enable = True +speed_wall = 40 +raft_margin = 15 +adhesion_type = raft +infill_sparse_density = 30 +layer_0_z_overlap = 0.22 +raft_base_line_spacing = 1.6 +speed_print = 45 +support_angle = 45 +cool_min_layer_time = 3 +raft_base_line_width = 0.8 + diff --git a/resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.6_fast.inst.cfg b/resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.6_fast.inst.cfg new file mode 100644 index 0000000000..a843ad6f17 --- /dev/null +++ b/resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.6_fast.inst.cfg @@ -0,0 +1,46 @@ +[general] +version = 2 +name = Fast Print +definition = ultimaker2_extended_plus + +[metadata] +type = quality +material = generic_nylon_ultimaker2_extended_plus_0.6_mm +weight = 0 +quality_type = fast + +[values] +support_xy_distance = 0.7 +speed_travel = 150 +speed_wall_x = 40 +cool_min_speed = 15 +support_top_distance = 0.55 +raft_surface_line_width = 0.6 +raft_surface_thickness = 0.15 +brim_line_count = 8 +speed_layer_0 = 30 +raft_interface_line_spacing = 1.4 +infill_overlap = 5 +layer_height = 0.3 +raft_interface_line_width = 1.2 +speed_support = 40 +speed_wall_0 = 15 +cool_fan_speed_min = 35 +wall_thickness = 1.2 +support_pattern = lines +support_infill_rate = 25 +speed_topbottom = 35 +support_enable = True +retraction_hop_enabled = 0.2 +support_bottom_distance = 0.55 +raft_margin = 15 +adhesion_type = raft +infill_sparse_density = 35 +layer_0_z_overlap = 0.22 +top_bottom_thickness = 1.2 +speed_print = 55 +raft_airgap = 0.44 +support_angle = 45 +raft_base_line_spacing = 2.4 +raft_base_line_width = 1.2 + diff --git a/resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.6_normal.inst.cfg b/resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.6_normal.inst.cfg new file mode 100644 index 0000000000..4a7eca7318 --- /dev/null +++ b/resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.6_normal.inst.cfg @@ -0,0 +1,45 @@ +[general] +version = 2 +name = Normal Quality +definition = ultimaker2_extended_plus + +[metadata] +type = quality +material = generic_nylon_ultimaker2_extended_plus_0.6_mm +weight = 0 +quality_type = normal + +[values] +support_xy_distance = 0.7 +speed_travel = 150 +support_z_distance = 0.55 +speed_wall_x = 40 +cool_min_speed = 15 +raft_surface_line_width = 0.6 +raft_surface_thickness = 0.15 +brim_line_count = 8 +speed_layer_0 = 30 +raft_interface_line_spacing = 1.4 +infill_overlap = 5 +layer_height = 0.15 +raft_interface_line_width = 1.2 +speed_support = 40 +speed_wall_0 = 15 +cool_fan_speed_min = 35 +wall_thickness = 1.2 +support_pattern = lines +support_infill_rate = 25 +speed_topbottom = 35 +support_enable = True +retraction_hop_enabled = 0.2 +raft_margin = 15 +adhesion_type = raft +infill_sparse_density = 35 +layer_0_z_overlap = 0.22 +top_bottom_thickness = 1.2 +speed_print = 55 +raft_airgap = 0.44 +support_angle = 45 +raft_base_line_spacing = 2.4 +raft_base_line_width = 1.2 + diff --git a/resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.8_draft.inst.cfg b/resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.8_draft.inst.cfg new file mode 100644 index 0000000000..aa880fce02 --- /dev/null +++ b/resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.8_draft.inst.cfg @@ -0,0 +1,46 @@ +[general] +version = 2 +name = Draft Print +definition = ultimaker2_extended_plus + +[metadata] +type = quality +material = generic_nylon_ultimaker2_extended_plus_0.8_mm +weight = 0 +quality_type = draft + +[values] +support_xy_distance = 0.75 +speed_travel = 150 +support_z_distance = 0.5 +speed_wall_x = 40 +cool_min_speed = 15 +brim_line_count = 8 +support_top_distance = 0.5 +raft_surface_thickness = 0.2 +wall_thickness = 2.4 +raft_margin = 15 +speed_layer_0 = 30 +raft_airgap = 0.44 +infill_overlap = 5 +layer_height = 0.3 +raft_interface_line_width = 1.6 +speed_support = 40 +speed_wall_0 = 15 +cool_fan_speed_min = 35 +raft_surface_line_width = 0.7 +support_pattern = lines +support_infill_rate = 25 +speed_topbottom = 35 +support_enable = True +retraction_hop_enabled = 0.2 +support_bottom_distance = 0.65 +top_bottom_thickness = 1.2 +adhesion_type = raft +infill_sparse_density = 40 +layer_0_z_overlap = 0.25 +raft_base_line_width = 1.6 +speed_print = 55 +support_angle = 45 +raft_interface_line_spacing = 1.8 + diff --git a/resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.8_normal.inst.cfg b/resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.8_normal.inst.cfg new file mode 100644 index 0000000000..ca392b2675 --- /dev/null +++ b/resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.8_normal.inst.cfg @@ -0,0 +1,46 @@ +[general] +version = 2 +name = Normal Quality +definition = ultimaker2_extended_plus + +[metadata] +type = quality +material = generic_nylon_ultimaker2_extended_plus_0.8_mm +weight = 0 +quality_type = normal + +[values] +support_xy_distance = 0.75 +speed_travel = 150 +support_z_distance = 0.5 +speed_wall_x = 40 +cool_min_speed = 15 +brim_line_count = 8 +support_top_distance = 0.5 +raft_surface_thickness = 0.2 +wall_thickness = 2.4 +raft_margin = 15 +speed_layer_0 = 30 +raft_airgap = 0.44 +infill_overlap = 5 +layer_height = 0.2 +raft_interface_line_width = 1.6 +speed_support = 40 +speed_wall_0 = 15 +cool_fan_speed_min = 35 +raft_surface_line_width = 0.7 +support_pattern = lines +support_infill_rate = 25 +speed_topbottom = 35 +support_enable = True +retraction_hop_enabled = 0.2 +support_bottom_distance = 0.65 +top_bottom_thickness = 1.2 +adhesion_type = raft +infill_sparse_density = 40 +layer_0_z_overlap = 0.25 +raft_base_line_width = 1.6 +speed_print = 55 +support_angle = 45 +raft_interface_line_spacing = 1.8 + diff --git a/resources/quality/ultimaker2_extended_plus/um2ep_pc_0.25_high.inst.cfg b/resources/quality/ultimaker2_extended_plus/um2ep_pc_0.25_high.inst.cfg new file mode 100644 index 0000000000..177bbfcc49 --- /dev/null +++ b/resources/quality/ultimaker2_extended_plus/um2ep_pc_0.25_high.inst.cfg @@ -0,0 +1,36 @@ +[general] +version = 2 +name = High Quality +definition = ultimaker2_extended_plus + +[metadata] +type = quality +material = generic_pc_ultimaker2_extended_plus_0.25_mm +weight = 0 +quality_type = high + +[values] +support_z_distance = 0.19 +raft_interface_line_spacing = 0.7 +cool_min_speed = 15 +cool_fan_speed = 50 +raft_surface_line_width = 0.2 +wall_thickness = 0.88 +raft_airgap = 0.5 +infill_overlap = 5 +layer_height = 0.06 +raft_interface_line_width = 0.5 +cool_fan_speed_min = 0 +brim_line_count = 32 +support_pattern = lines +support_infill_rate = 20 +support_enable = True +raft_margin = 15 +adhesion_type = raft +infill_sparse_density = 25 +layer_0_z_overlap = 0.22 +cool_min_layer_time = 2 +speed_print = 30 +raft_base_line_spacing = 1 +raft_base_line_width = 0.5 + diff --git a/resources/quality/ultimaker2_extended_plus/um2ep_pc_0.25_normal.inst.cfg b/resources/quality/ultimaker2_extended_plus/um2ep_pc_0.25_normal.inst.cfg new file mode 100644 index 0000000000..0451e0bb25 --- /dev/null +++ b/resources/quality/ultimaker2_extended_plus/um2ep_pc_0.25_normal.inst.cfg @@ -0,0 +1,36 @@ +[general] +version = 2 +name = Normal Quality +definition = ultimaker2_extended_plus + +[metadata] +type = quality +material = generic_pc_ultimaker2_extended_plus_0.25_mm +weight = 0 +quality_type = normal + +[values] +support_z_distance = 0.19 +raft_interface_line_spacing = 0.7 +cool_min_speed = 15 +cool_fan_speed = 50 +raft_surface_line_width = 0.2 +wall_thickness = 0.88 +raft_airgap = 0.5 +infill_overlap = 5 +layer_height = 0.1 +raft_interface_line_width = 0.5 +cool_fan_speed_min = 0 +brim_line_count = 32 +support_pattern = lines +support_infill_rate = 20 +support_enable = True +raft_margin = 15 +adhesion_type = raft +infill_sparse_density = 25 +layer_0_z_overlap = 0.22 +cool_min_layer_time = 2 +speed_print = 30 +raft_base_line_spacing = 1 +raft_base_line_width = 0.5 + diff --git a/resources/quality/ultimaker2_extended_plus/um2ep_pc_0.4_fast.inst.cfg b/resources/quality/ultimaker2_extended_plus/um2ep_pc_0.4_fast.inst.cfg new file mode 100644 index 0000000000..e9d62b8435 --- /dev/null +++ b/resources/quality/ultimaker2_extended_plus/um2ep_pc_0.4_fast.inst.cfg @@ -0,0 +1,37 @@ +[general] +version = 2 +name = Fast Print +definition = ultimaker2_extended_plus + +[metadata] +type = quality +material = generic_pc_ultimaker2_extended_plus_0.4_mm +weight = 0 +quality_type = fast + +[values] +speed_wall_x = 30 +support_z_distance = 0.19 +raft_airgap = 0.57 +cool_min_speed = 8 +cool_fan_speed = 50 +raft_interface_line_spacing = 1 +infill_overlap = 5 +layer_height = 0.2 +raft_interface_line_width = 0.8 +speed_wall_0 = 20 +cool_fan_speed_min = 0 +wall_thickness = 1.2 +support_pattern = lines +support_infill_rate = 20 +support_enable = True +raft_margin = 15 +adhesion_type = raft +infill_sparse_density = 30 +layer_0_z_overlap = 0.22 +cool_min_layer_time = 3 +speed_print = 45 +support_angle = 45 +raft_base_line_spacing = 1.6 +raft_base_line_width = 0.8 + diff --git a/resources/quality/ultimaker2_extended_plus/um2ep_pc_0.4_normal.inst.cfg b/resources/quality/ultimaker2_extended_plus/um2ep_pc_0.4_normal.inst.cfg new file mode 100644 index 0000000000..1a637efcf2 --- /dev/null +++ b/resources/quality/ultimaker2_extended_plus/um2ep_pc_0.4_normal.inst.cfg @@ -0,0 +1,37 @@ +[general] +version = 2 +name = Normal Quality +definition = ultimaker2_extended_plus + +[metadata] +type = quality +material = generic_pc_ultimaker2_extended_plus_0.4_mm +weight = 0 +quality_type = normal + +[values] +speed_wall_x = 30 +support_z_distance = 0.19 +raft_airgap = 0.57 +cool_min_speed = 8 +cool_fan_speed = 50 +raft_interface_line_spacing = 1 +infill_overlap = 5 +layer_height = 0.1 +raft_interface_line_width = 0.8 +speed_wall_0 = 20 +cool_fan_speed_min = 0 +wall_thickness = 1.2 +support_pattern = lines +support_infill_rate = 20 +support_enable = True +raft_margin = 15 +adhesion_type = raft +infill_sparse_density = 30 +layer_0_z_overlap = 0.22 +cool_min_layer_time = 3 +speed_print = 45 +support_angle = 45 +raft_base_line_spacing = 1.6 +raft_base_line_width = 0.8 + diff --git a/resources/quality/ultimaker2_extended_plus/um2ep_pc_0.6_fast.inst.cfg b/resources/quality/ultimaker2_extended_plus/um2ep_pc_0.6_fast.inst.cfg new file mode 100644 index 0000000000..9ee6467714 --- /dev/null +++ b/resources/quality/ultimaker2_extended_plus/um2ep_pc_0.6_fast.inst.cfg @@ -0,0 +1,44 @@ +[general] +version = 2 +name = Fast Print +definition = ultimaker2_extended_plus + +[metadata] +type = quality +material = generic_pc_ultimaker2_extended_plus_0.6_mm +weight = 0 +quality_type = fast + +[values] +speed_travel = 150 +support_z_distance = 0.21 +speed_wall_x = 40 +cool_min_speed = 8 +cool_fan_speed = 50 +raft_surface_thickness = 0.15 +raft_surface_line_width = 0.6 +raft_interface_line_spacing = 1.4 +speed_layer_0 = 30 +raft_airgap = 0.52 +infill_overlap = 5 +layer_height = 0.3 +raft_interface_line_width = 1.2 +raft_margin = 15 +cool_fan_speed_min = 0 +wall_thickness = 1.06 +support_pattern = lines +support_infill_rate = 20 +speed_topbottom = 20 +support_enable = True +top_bottom_thickness = 0.75 +adhesion_type = raft +infill_sparse_density = 35 +layer_0_z_overlap = 0.22 +raft_base_line_spacing = 2.4 +speed_print = 45 +support_line_distance = 3.5333 +speed_wall_0 = 30 +support_angle = 45 +cool_min_layer_time = 3 +raft_base_line_width = 1.2 + diff --git a/resources/quality/ultimaker2_extended_plus/um2ep_pc_0.6_normal.inst.cfg b/resources/quality/ultimaker2_extended_plus/um2ep_pc_0.6_normal.inst.cfg new file mode 100644 index 0000000000..8697a456cb --- /dev/null +++ b/resources/quality/ultimaker2_extended_plus/um2ep_pc_0.6_normal.inst.cfg @@ -0,0 +1,44 @@ +[general] +version = 2 +name = Normal Quality +definition = ultimaker2_extended_plus + +[metadata] +type = quality +material = generic_pc_ultimaker2_extended_plus_0.6_mm +weight = 0 +quality_type = normal + +[values] +speed_travel = 150 +support_z_distance = 0.21 +speed_wall_x = 40 +cool_min_speed = 8 +cool_fan_speed = 50 +raft_surface_thickness = 0.15 +raft_surface_line_width = 0.6 +raft_interface_line_spacing = 1.4 +speed_layer_0 = 30 +raft_airgap = 0.52 +infill_overlap = 5 +layer_height = 0.15 +raft_interface_line_width = 1.2 +raft_margin = 15 +cool_fan_speed_min = 0 +wall_thickness = 1.06 +support_pattern = lines +support_infill_rate = 20 +speed_topbottom = 20 +support_enable = True +top_bottom_thickness = 0.75 +adhesion_type = raft +infill_sparse_density = 35 +layer_0_z_overlap = 0.22 +raft_base_line_spacing = 2.4 +speed_print = 45 +support_line_distance = 3.5333 +speed_wall_0 = 30 +support_angle = 45 +cool_min_layer_time = 3 +raft_base_line_width = 1.2 + diff --git a/resources/quality/ultimaker2_extended_plus/um2ep_pc_0.8_draft.inst.cfg b/resources/quality/ultimaker2_extended_plus/um2ep_pc_0.8_draft.inst.cfg new file mode 100644 index 0000000000..b5bede87e5 --- /dev/null +++ b/resources/quality/ultimaker2_extended_plus/um2ep_pc_0.8_draft.inst.cfg @@ -0,0 +1,37 @@ +[general] +version = 2 +name = Draft Print +definition = ultimaker2_extended_plus + +[metadata] +type = quality +material = generic_pc_ultimaker2_extended_plus_0.8_mm +weight = 0 +quality_type = draft + +[values] +support_z_distance = 0.26 +raft_airgap = 0.47 +cool_fan_speed = 50 +raft_surface_line_width = 0.7 +raft_surface_thickness = 0.2 +brim_line_count = 10 +raft_interface_line_spacing = 1.8 +infill_overlap = 5 +layer_height = 0.5 +raft_interface_line_width = 1.6 +top_bottom_thickness = 2.0 +cool_fan_speed_min = 25 +wall_thickness = 2.1 +support_pattern = lines +support_infill_rate = 20 +support_enable = True +raft_margin = 15 +adhesion_type = raft +infill_sparse_density = 40 +layer_0_z_overlap = 0.22 +raft_base_line_width = 1.6 +speed_print = 40 +support_angle = 45 +cool_min_layer_time = 3 + diff --git a/resources/quality/ultimaker2_extended_plus/um2ep_pc_0.8_normal.inst.cfg b/resources/quality/ultimaker2_extended_plus/um2ep_pc_0.8_normal.inst.cfg new file mode 100644 index 0000000000..177db28c00 --- /dev/null +++ b/resources/quality/ultimaker2_extended_plus/um2ep_pc_0.8_normal.inst.cfg @@ -0,0 +1,37 @@ +[general] +version = 2 +name = Normal Quality +definition = ultimaker2_extended_plus + +[metadata] +type = quality +material = generic_pc_ultimaker2_extended_plus_0.8_mm +weight = 0 +quality_type = normal + +[values] +support_z_distance = 0.26 +raft_airgap = 0.47 +cool_fan_speed = 50 +raft_surface_line_width = 0.7 +raft_surface_thickness = 0.2 +brim_line_count = 10 +raft_interface_line_spacing = 1.8 +infill_overlap = 5 +layer_height = 0.2 +raft_interface_line_width = 1.6 +top_bottom_thickness = 1.2 +cool_fan_speed_min = 25 +wall_thickness = 2.1 +support_pattern = lines +support_infill_rate = 20 +support_enable = True +raft_margin = 15 +adhesion_type = raft +infill_sparse_density = 40 +layer_0_z_overlap = 0.22 +raft_base_line_width = 1.6 +speed_print = 40 +support_angle = 45 +cool_min_layer_time = 3 + diff --git a/resources/quality/ultimaker2_extended_plus/um2ep_tpu_0.25_high.inst.cfg b/resources/quality/ultimaker2_extended_plus/um2ep_tpu_0.25_high.inst.cfg new file mode 100644 index 0000000000..8af5752063 --- /dev/null +++ b/resources/quality/ultimaker2_extended_plus/um2ep_tpu_0.25_high.inst.cfg @@ -0,0 +1,42 @@ +[general] +version = 2 +name = High Quality +definition = ultimaker2_extended_plus + +[metadata] +type = quality +material = generic_tpu_ultimaker2_extended_plus_0.25_mm +weight = 0 +quality_type = high + +[values] +support_xy_distance = 0.6 +cool_min_speed = 15 +support_infill_rate = 25 +speed_wall_0 = 15 +layer_0_z_overlap = 0.1 +cool_min_layer_time = 7 +speed_layer_0 = 30 +speed_print = 40 +wall_thickness = 0.88 +support_enable = True +speed_topbottom = 35 +raft_surface_line_width = 0.2 +raft_base_line_spacing = 1 +top_bottom_thickness = 1.2 +layer_height = 0.06 +support_angle = 45 +infill_sparse_density = 10 +cool_fan_speed = 60 +speed_travel = 150 +speed_support = 40 +support_z_distance = 0.45 +cool_fan_speed_min = 35 +brim_line_count = 8 +retraction_hop_enabled = 0.2 +speed_wall_x = 38 +raft_airgap = 0.2 +raft_interface_line_spacing = 1 +adhesion_type = brim +raft_interface_line_width = 0.2 + diff --git a/resources/quality/ultimaker2_extended_plus/um2ep_tpu_0.4_normal.inst.cfg b/resources/quality/ultimaker2_extended_plus/um2ep_tpu_0.4_normal.inst.cfg new file mode 100644 index 0000000000..085c3ffeb4 --- /dev/null +++ b/resources/quality/ultimaker2_extended_plus/um2ep_tpu_0.4_normal.inst.cfg @@ -0,0 +1,39 @@ +[general] +version = 2 +name = Normal Quality +definition = ultimaker2_extended_plus + +[metadata] +type = quality +material = generic_tpu_ultimaker2_extended_plus_0.4_mm +weight = 0 +quality_type = normal + +[values] +support_xy_distance = 0.65 +speed_travel = 150 +support_z_distance = 0.45 +speed_wall_x = 35 +cool_min_speed = 15 +cool_fan_speed = 60 +retraction_hop_enabled = 0.2 +brim_line_count = 8 +speed_layer_0 = 30 +raft_interface_line_spacing = 1 +raft_base_line_spacing = 2 +speed_support = 40 +raft_margin = 12 +cool_fan_speed_min = 35 +wall_thickness = 1.05 +support_infill_rate = 25 +speed_topbottom = 35 +support_enable = True +speed_wall_0 = 20 +adhesion_type = brim +infill_sparse_density = 10 +top_bottom_thickness = 1.2 +speed_print = 40 +support_angle = 45 +cool_min_layer_time = 10 +raft_base_line_width = 0.8 + diff --git a/resources/quality/ultimaker2_extended_plus/um2ep_tpu_0.6_fast.inst.cfg b/resources/quality/ultimaker2_extended_plus/um2ep_tpu_0.6_fast.inst.cfg new file mode 100644 index 0000000000..8a501920d8 --- /dev/null +++ b/resources/quality/ultimaker2_extended_plus/um2ep_tpu_0.6_fast.inst.cfg @@ -0,0 +1,44 @@ +[general] +version = 2 +name = Fast Print +definition = ultimaker2_extended_plus + +[metadata] +type = quality +material = generic_tpu_ultimaker2_extended_plus_0.6_mm +weight = 0 +quality_type = fast + +[values] +support_xy_distance = 0.7 +raft_base_line_width = 0.6 +cool_min_speed = 15 +line_width = 0.57 +support_infill_rate = 25 +speed_wall_0 = 15 +wall_thickness = 1.14 +raft_base_line_spacing = 1.2 +speed_layer_0 = 30 +raft_margin = 15 +speed_travel = 150 +raft_surface_line_width = 0.5 +layer_height = 0.12 +raft_interface_line_width = 0.57 +speed_print = 45 +top_bottom_thickness = 1.2 +speed_topbottom = 35 +layer_0_z_overlap = 0.12 +support_angle = 45 +infill_sparse_density = 10 +cool_fan_speed = 60 +speed_support = 40 +support_z_distance = 0.45 +cool_fan_speed_min = 35 +brim_line_count = 8 +retraction_hop_enabled = 0.2 +speed_wall_x = 40 +support_enable = True +raft_interface_line_spacing = 1.2 +adhesion_type = brim +raft_airgap = 0.24 +