Print profile for Method Nylon in 1A, !C and LABS extruder.

PP-577

resources/quality/ultimaker_method/um_method_1a_um-nylon-175_0.2mm.inst.cfg

@@ -0,0 +1,58 @@
+[general]
+definition = ultimaker_method
+name = Fast
+version = 4
+
+[metadata]
+material = ultimaker_nylon_175
+quality_type = draft
+setting_version = 25
+type = quality
+variant = 1A
+weight = -2
+
+[values]
+cool_fan_enabled = True
+cool_fan_speed = 0
+cool_fan_speed_max = 0
+cool_min_layer_time = 8
+cool_min_speed = 10
+cool_min_temperature = 250
+material_final_print_temperature = =default_material_print_temperature-5
+material_initial_print_temperature = =default_material_print_temperature-5
+raft_airgap = 0.3
+raft_base_flow = 105
+raft_base_line_width = 1.2
+raft_base_speed = 10
+raft_base_thickness = 0.6
+raft_interface_thickness = 0.25
+retraction_amount = 0.5
+retraction_min_travel = 3.2ƒ√
+small_skin_width = 3.6
+speed_prime_tower = =speed_print
+speed_print = 50
+speed_roofing = =speed_print * 3/5
+speed_topbottom = =speed_roofing
+speed_wall = =speed_print * 3/5
+speed_wall_0 = =speed_wall * 5/6
+speed_wall_x = =speed_wall
+support_angle = 30
+support_bottom_density = 24
+support_bottom_distance = =layer_height
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_infill_rate = =0 if support_structure == tree else 12.0
+support_interface_height = 0.406
+support_interface_material_flow = 95
+support_interface_pattern = lines
+support_line_width = =line_width * 0.75
+support_material_flow = 92
+support_roof_density = 50
+support_roof_height = =support_interface_height
+support_structure = tree
+support_supported_skin_fan_speed = 75
+support_wall_count = 1
+support_xy_distance = 0.3
+support_z_distance = 0.3
+

resources/quality/ultimaker_method/um_method_1c_um-nylon-175_0.2mm.inst.cfg

@@ -0,0 +1,58 @@
+[general]
+definition = ultimaker_method
+name = Fast
+version = 4
+
+[metadata]
+material = ultimaker_nylon_175
+quality_type = draft
+setting_version = 25
+type = quality
+variant = 1C
+weight = -2
+
+[values]
+cool_fan_enabled = True
+cool_fan_speed = 0
+cool_fan_speed_max = 0
+cool_min_layer_time = 8
+cool_min_speed = 10
+cool_min_temperature = 250
+material_final_print_temperature = =default_material_print_temperature-5
+material_initial_print_temperature = =default_material_print_temperature-5
+raft_airgap = 0.3
+raft_base_flow = 105
+raft_base_line_width = 1.2
+raft_base_speed = 10
+raft_base_thickness = 0.6
+raft_interface_thickness = 0.25
+retraction_amount = 0.5
+retraction_min_travel = 3.2ƒ√
+small_skin_width = 3.6
+speed_prime_tower = =speed_print
+speed_print = 50
+speed_roofing = =speed_print * 3/5
+speed_topbottom = =speed_roofing
+speed_wall = =speed_print * 3/5
+speed_wall_0 = =speed_wall * 5/6
+speed_wall_x = =speed_wall
+support_angle = 30
+support_bottom_density = 24
+support_bottom_distance = =layer_height
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_infill_rate = =0 if support_structure == tree else 12.0
+support_interface_height = 0.406
+support_interface_material_flow = 95
+support_interface_pattern = lines
+support_line_width = =line_width * 0.75
+support_material_flow = 92
+support_roof_density = 50
+support_roof_height = =support_interface_height
+support_structure = tree
+support_supported_skin_fan_speed = 75
+support_wall_count = 1
+support_xy_distance = 0.3
+support_z_distance = 0.3
+

resources/quality/ultimaker_method/um_method_labs_um-nylon-175_0.2mm.inst.cfg

@@ -0,0 +1,58 @@
+[general]
+definition = ultimaker_method
+name = Fast
+version = 4
+
+[metadata]
+material = ultimaker_nylon_175
+quality_type = draft
+setting_version = 25
+type = quality
+variant = LABS
+weight = -2
+
+[values]
+cool_fan_enabled = True
+cool_fan_speed = 0
+cool_fan_speed_max = 0
+cool_min_layer_time = 8
+cool_min_speed = 10
+cool_min_temperature = 250
+material_final_print_temperature = =default_material_print_temperature-5
+material_initial_print_temperature = =default_material_print_temperature-5
+raft_airgap = 0.3
+raft_base_flow = 105
+raft_base_line_width = 1.2
+raft_base_speed = 10
+raft_base_thickness = 0.6
+raft_interface_thickness = 0.25
+retraction_amount = 0.5
+retraction_min_travel = 3.2ƒ√
+small_skin_width = 3.6
+speed_prime_tower = =speed_print
+speed_print = 50
+speed_roofing = =speed_print * 3/5
+speed_topbottom = =speed_roofing
+speed_wall = =speed_print * 3/5
+speed_wall_0 = =speed_wall * 5/6
+speed_wall_x = =speed_wall
+support_angle = 30
+support_bottom_density = 24
+support_bottom_distance = =layer_height
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_infill_rate = =0 if support_structure == tree else 12.0
+support_interface_height = 0.406
+support_interface_material_flow = 95
+support_interface_pattern = lines
+support_line_width = =line_width * 0.75
+support_material_flow = 92
+support_roof_density = 50
+support_roof_height = =support_interface_height
+support_structure = tree
+support_supported_skin_fan_speed = 75
+support_wall_count = 1
+support_xy_distance = 0.3
+support_z_distance = 0.3
+

resources/quality/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm.inst.cfg

@@ -0,0 +1,58 @@
+[general]
+definition = ultimaker_methodx
+name = Fast
+version = 4
+
+[metadata]
+material = ultimaker_nylon_175
+quality_type = draft
+setting_version = 25
+type = quality
+variant = 1A
+weight = -2
+
+[values]
+cool_fan_enabled = True
+cool_fan_speed = 0
+cool_fan_speed_max = 0
+cool_min_layer_time = 8
+cool_min_speed = 10
+cool_min_temperature = 250
+material_final_print_temperature = =default_material_print_temperature-5
+material_initial_print_temperature = =default_material_print_temperature-5
+raft_airgap = 0.3
+raft_base_flow = 105
+raft_base_line_width = 1.2
+raft_base_speed = 10
+raft_base_thickness = 0.6
+raft_interface_thickness = 0.25
+retraction_amount = 0.5
+retraction_min_travel = 3.2ƒ√
+small_skin_width = 3.6
+speed_prime_tower = =speed_print
+speed_print = 50
+speed_roofing = =speed_print * 3/5
+speed_topbottom = =speed_roofing
+speed_wall = =speed_print * 3/5
+speed_wall_0 = =speed_wall * 5/6
+speed_wall_x = =speed_wall
+support_angle = 30
+support_bottom_density = 24
+support_bottom_distance = =layer_height
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_infill_rate = =0 if support_structure == tree else 12.0
+support_interface_height = 0.406
+support_interface_material_flow = 95
+support_interface_pattern = lines
+support_line_width = =line_width * 0.75
+support_material_flow = 92
+support_roof_density = 50
+support_roof_height = =support_interface_height
+support_structure = tree
+support_supported_skin_fan_speed = 75
+support_wall_count = 1
+support_xy_distance = 0.3
+support_z_distance = 0.3
+

resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm.inst.cfg

@@ -0,0 +1,58 @@
+[general]
+definition = ultimaker_methodx
+name = Fast
+version = 4
+
+[metadata]
+material = ultimaker_nylon_175
+quality_type = draft
+setting_version = 25
+type = quality
+variant = 1C
+weight = -2
+
+[values]
+cool_fan_enabled = True
+cool_fan_speed = 0
+cool_fan_speed_max = 0
+cool_min_layer_time = 8
+cool_min_speed = 10
+cool_min_temperature = 250
+material_final_print_temperature = =default_material_print_temperature-5
+material_initial_print_temperature = =default_material_print_temperature-5
+raft_airgap = 0.3
+raft_base_flow = 105
+raft_base_line_width = 1.2
+raft_base_speed = 10
+raft_base_thickness = 0.6
+raft_interface_thickness = 0.25
+retraction_amount = 0.5
+retraction_min_travel = 3.2ƒ√
+small_skin_width = 3.6
+speed_prime_tower = =speed_print
+speed_print = 50
+speed_roofing = =speed_print * 3/5
+speed_topbottom = =speed_roofing
+speed_wall = =speed_print * 3/5
+speed_wall_0 = =speed_wall * 5/6
+speed_wall_x = =speed_wall
+support_angle = 30
+support_bottom_density = 24
+support_bottom_distance = =layer_height
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_infill_rate = =0 if support_structure == tree else 12.0
+support_interface_height = 0.406
+support_interface_material_flow = 95
+support_interface_pattern = lines
+support_line_width = =line_width * 0.75
+support_material_flow = 92
+support_roof_density = 50
+support_roof_height = =support_interface_height
+support_structure = tree
+support_supported_skin_fan_speed = 75
+support_wall_count = 1
+support_xy_distance = 0.3
+support_z_distance = 0.3
+

resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm.inst.cfg

@@ -0,0 +1,58 @@
+[general]
+definition = ultimaker_methodx
+name = Fast
+version = 4
+
+[metadata]
+material = ultimaker_nylon_175
+quality_type = draft
+setting_version = 25
+type = quality
+variant = LABS
+weight = -2
+
+[values]
+cool_fan_enabled = True
+cool_fan_speed = 0
+cool_fan_speed_max = 0
+cool_min_layer_time = 8
+cool_min_speed = 10
+cool_min_temperature = 250
+material_final_print_temperature = =default_material_print_temperature-5
+material_initial_print_temperature = =default_material_print_temperature-5
+raft_airgap = 0.3
+raft_base_flow = 105
+raft_base_line_width = 1.2
+raft_base_speed = 10
+raft_base_thickness = 0.6
+raft_interface_thickness = 0.25
+retraction_amount = 0.5
+retraction_min_travel = 3.2ƒ√
+small_skin_width = 3.6
+speed_prime_tower = =speed_print
+speed_print = 50
+speed_roofing = =speed_print * 3/5
+speed_topbottom = =speed_roofing
+speed_wall = =speed_print * 3/5
+speed_wall_0 = =speed_wall * 5/6
+speed_wall_x = =speed_wall
+support_angle = 30
+support_bottom_density = 24
+support_bottom_distance = =layer_height
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_infill_rate = =0 if support_structure == tree else 12.0
+support_interface_height = 0.406
+support_interface_material_flow = 95
+support_interface_pattern = lines
+support_line_width = =line_width * 0.75
+support_material_flow = 92
+support_roof_density = 50
+support_roof_height = =support_interface_height
+support_structure = tree
+support_supported_skin_fan_speed = 75
+support_wall_count = 1
+support_xy_distance = 0.3
+support_z_distance = 0.3
+