diff --git a/resources/definitions/ultimaker_method.def.json b/resources/definitions/ultimaker_method.def.json
index d2813ea8a3..c1a820f834 100644
--- a/resources/definitions/ultimaker_method.def.json
+++ b/resources/definitions/ultimaker_method.def.json
@@ -45,7 +45,6 @@
             "ultimaker_bvoh_175",
             "ultimaker_cffpa_175",
             "ultimaker_cpe_175",
-            "ultimaker_nylon_175",
             "ultimaker_hips_175",
             "ultimaker_pc_175",
             "ultimaker_tpu_175",
diff --git a/resources/definitions/ultimaker_method_base.def.json b/resources/definitions/ultimaker_method_base.def.json
index e421b20529..ac37078571 100644
--- a/resources/definitions/ultimaker_method_base.def.json
+++ b/resources/definitions/ultimaker_method_base.def.json
@@ -701,7 +701,7 @@
                 45
             ]
         },
-        "support_infill_rate": { "value": 20.0 },
+        "support_infill_rate": { "value": "0 if support_structure == 'tree' else 20.0" },
         "support_infill_sparse_thickness": { "value": "layer_height" },
         "support_interface_enable": { "value": true },
         "support_interface_height": { "value": "4*support_infill_sparse_thickness" },
diff --git a/resources/definitions/ultimaker_methodx.def.json b/resources/definitions/ultimaker_methodx.def.json
index 37b11ad4ef..e5aa87afc1 100644
--- a/resources/definitions/ultimaker_methodx.def.json
+++ b/resources/definitions/ultimaker_methodx.def.json
@@ -44,7 +44,6 @@
             "zyyx_pro_",
             "octofiber_",
             "fiberlogy_",
-            "ultimaker_nylon_175",
             "ultimaker_metallic_pla_175"
         ],
         "has_machine_materials": true,
diff --git a/resources/intent/ultimaker_method/um_method_1a_um-nylon-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_method/um_method_1a_um-nylon-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..a864337115
--- /dev/null
+++ b/resources/intent/ultimaker_method/um_method_1a_um-nylon-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,25 @@
+[general]
+definition = ultimaker_method
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_nylon_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1A
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_min_layer_time = 3
+infill_pattern = zigzag
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+support_pattern = zigzag
+
diff --git a/resources/intent/ultimaker_method/um_method_1a_um-nylon-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_method/um_method_1a_um-nylon-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..9dd0d6c8fa
--- /dev/null
+++ b/resources/intent/ultimaker_method/um_method_1a_um-nylon-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+definition = ultimaker_method
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_nylon_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1A
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+cool_min_layer_time = 3
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+support_pattern = zigzag
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_method/um_method_1a_um-nylon-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_method/um_method_1a_um-nylon-175_0.2mm_solid.inst.cfg
new file mode 100644
index 0000000000..912d71d2eb
--- /dev/null
+++ b/resources/intent/ultimaker_method/um_method_1a_um-nylon-175_0.2mm_solid.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+definition = ultimaker_method
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+material = ultimaker_nylon_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1A
+
+[values]
+bottom_thickness = =top_bottom_thickness
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_method/um_method_1c_um-nylon-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_method/um_method_1c_um-nylon-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..8e9ae1594a
--- /dev/null
+++ b/resources/intent/ultimaker_method/um_method_1c_um-nylon-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,25 @@
+[general]
+definition = ultimaker_method
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_nylon_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1C
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_min_layer_time = 3
+infill_pattern = zigzag
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+support_pattern = zigzag
+
diff --git a/resources/intent/ultimaker_method/um_method_1c_um-nylon-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_method/um_method_1c_um-nylon-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..65918cdec0
--- /dev/null
+++ b/resources/intent/ultimaker_method/um_method_1c_um-nylon-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+definition = ultimaker_method
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_nylon_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1C
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+cool_min_layer_time = 3
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+support_pattern = zigzag
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_method/um_method_1c_um-nylon-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_method/um_method_1c_um-nylon-175_0.2mm_solid.inst.cfg
new file mode 100644
index 0000000000..ed8949a519
--- /dev/null
+++ b/resources/intent/ultimaker_method/um_method_1c_um-nylon-175_0.2mm_solid.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+definition = ultimaker_method
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+material = ultimaker_nylon_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1C
+
+[values]
+bottom_thickness = =top_bottom_thickness
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_method/um_method_labs_um-nylon-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_method/um_method_labs_um-nylon-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..c8e31af0be
--- /dev/null
+++ b/resources/intent/ultimaker_method/um_method_labs_um-nylon-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,25 @@
+[general]
+definition = ultimaker_method
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_nylon_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = LABS
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_min_layer_time = 3
+infill_pattern = zigzag
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+support_pattern = zigzag
+
diff --git a/resources/intent/ultimaker_method/um_method_labs_um-nylon-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_method/um_method_labs_um-nylon-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..94aa6c8267
--- /dev/null
+++ b/resources/intent/ultimaker_method/um_method_labs_um-nylon-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+definition = ultimaker_method
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_nylon_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = LABS
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+cool_min_layer_time = 3
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+support_pattern = zigzag
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_method/um_method_labs_um-nylon-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_method/um_method_labs_um-nylon-175_0.2mm_solid.inst.cfg
new file mode 100644
index 0000000000..f77d77afa2
--- /dev/null
+++ b/resources/intent/ultimaker_method/um_method_labs_um-nylon-175_0.2mm_solid.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+definition = ultimaker_method
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+material = ultimaker_nylon_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = LABS
+
+[values]
+bottom_thickness = =top_bottom_thickness
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..967aa0dbf8
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,25 @@
+[general]
+definition = ultimaker_methodx
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_nylon_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1A
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_min_layer_time = 3
+infill_pattern = zigzag
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+support_pattern = zigzag
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..a08f2e1948
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+definition = ultimaker_methodx
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_nylon_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1A
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+cool_min_layer_time = 3
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+support_pattern = zigzag
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm_solid.inst.cfg
new file mode 100644
index 0000000000..e9d7188457
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm_solid.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+definition = ultimaker_methodx
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+material = ultimaker_nylon_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1A
+
+[values]
+bottom_thickness = =top_bottom_thickness
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..d31a6542b6
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,25 @@
+[general]
+definition = ultimaker_methodx
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_nylon_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1C
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_min_layer_time = 3
+infill_pattern = zigzag
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+support_pattern = zigzag
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..29bd7371a0
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+definition = ultimaker_methodx
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_nylon_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1C
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+cool_min_layer_time = 3
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+support_pattern = zigzag
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm_solid.inst.cfg
new file mode 100644
index 0000000000..ae2bc39db8
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm_solid.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+definition = ultimaker_methodx
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+material = ultimaker_nylon_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1C
+
+[values]
+bottom_thickness = =top_bottom_thickness
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..e54a52ba05
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,25 @@
+[general]
+definition = ultimaker_methodx
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_nylon_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = LABS
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_min_layer_time = 3
+infill_pattern = zigzag
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+support_pattern = zigzag
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..d1402a3140
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+definition = ultimaker_methodx
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_nylon_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = LABS
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+cool_min_layer_time = 3
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+support_pattern = zigzag
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm_solid.inst.cfg
new file mode 100644
index 0000000000..e5a0fe6dc8
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm_solid.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+definition = ultimaker_methodx
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+material = ultimaker_nylon_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = LABS
+
+[values]
+bottom_thickness = =top_bottom_thickness
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/quality/ultimaker_method/um_method_1a_um-nylon-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_1a_um-nylon-175_0.2mm.inst.cfg
new file mode 100644
index 0000000000..13b5c6c4f1
--- /dev/null
+++ b/resources/quality/ultimaker_method/um_method_1a_um-nylon-175_0.2mm.inst.cfg
@@ -0,0 +1,58 @@
+[general]
+definition = ultimaker_method
+name = Fast
+version = 4
+
+[metadata]
+material = ultimaker_nylon_175
+quality_type = draft
+setting_version = 25
+type = quality
+variant = 1A
+weight = -2
+
+[values]
+cool_fan_enabled = True
+cool_fan_speed = 0
+cool_fan_speed_max = 0
+cool_min_layer_time = 8
+cool_min_speed = 10
+cool_min_temperature = 250
+material_final_print_temperature = =default_material_print_temperature-5
+material_initial_print_temperature = =default_material_print_temperature-5
+raft_airgap = 0.3
+raft_base_flow = 105
+raft_base_line_width = 1.2
+raft_base_speed = 10
+raft_base_thickness = 0.6
+raft_interface_thickness = 0.25
+retraction_amount = 0.5
+retraction_min_travel = 3.2ƒ√
+small_skin_width = 3.6
+speed_prime_tower = =speed_print
+speed_print = 50
+speed_roofing = =speed_print * 3/5
+speed_topbottom = =speed_roofing
+speed_wall = =speed_print * 3/5
+speed_wall_0 = =speed_wall * 5/6
+speed_wall_x = =speed_wall
+support_angle = 30
+support_bottom_density = 24
+support_bottom_distance = =layer_height
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_infill_rate = =0 if support_structure == tree else 12.0
+support_interface_height = 0.406
+support_interface_material_flow = 95
+support_interface_pattern = lines
+support_line_width = =line_width * 0.75
+support_material_flow = 92
+support_roof_density = 50
+support_roof_height = =support_interface_height
+support_structure = tree
+support_supported_skin_fan_speed = 75
+support_wall_count = 1
+support_xy_distance = 0.3
+support_z_distance = 0.3
+
diff --git a/resources/quality/ultimaker_method/um_method_1c_um-nylon-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_1c_um-nylon-175_0.2mm.inst.cfg
new file mode 100644
index 0000000000..6a7fb34999
--- /dev/null
+++ b/resources/quality/ultimaker_method/um_method_1c_um-nylon-175_0.2mm.inst.cfg
@@ -0,0 +1,58 @@
+[general]
+definition = ultimaker_method
+name = Fast
+version = 4
+
+[metadata]
+material = ultimaker_nylon_175
+quality_type = draft
+setting_version = 25
+type = quality
+variant = 1C
+weight = -2
+
+[values]
+cool_fan_enabled = True
+cool_fan_speed = 0
+cool_fan_speed_max = 0
+cool_min_layer_time = 8
+cool_min_speed = 10
+cool_min_temperature = 250
+material_final_print_temperature = =default_material_print_temperature-5
+material_initial_print_temperature = =default_material_print_temperature-5
+raft_airgap = 0.3
+raft_base_flow = 105
+raft_base_line_width = 1.2
+raft_base_speed = 10
+raft_base_thickness = 0.6
+raft_interface_thickness = 0.25
+retraction_amount = 0.5
+retraction_min_travel = 3.2ƒ√
+small_skin_width = 3.6
+speed_prime_tower = =speed_print
+speed_print = 50
+speed_roofing = =speed_print * 3/5
+speed_topbottom = =speed_roofing
+speed_wall = =speed_print * 3/5
+speed_wall_0 = =speed_wall * 5/6
+speed_wall_x = =speed_wall
+support_angle = 30
+support_bottom_density = 24
+support_bottom_distance = =layer_height
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_infill_rate = =0 if support_structure == tree else 12.0
+support_interface_height = 0.406
+support_interface_material_flow = 95
+support_interface_pattern = lines
+support_line_width = =line_width * 0.75
+support_material_flow = 92
+support_roof_density = 50
+support_roof_height = =support_interface_height
+support_structure = tree
+support_supported_skin_fan_speed = 75
+support_wall_count = 1
+support_xy_distance = 0.3
+support_z_distance = 0.3
+
diff --git a/resources/quality/ultimaker_method/um_method_labs_um-nylon-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_labs_um-nylon-175_0.2mm.inst.cfg
new file mode 100644
index 0000000000..5b85e94356
--- /dev/null
+++ b/resources/quality/ultimaker_method/um_method_labs_um-nylon-175_0.2mm.inst.cfg
@@ -0,0 +1,58 @@
+[general]
+definition = ultimaker_method
+name = Fast
+version = 4
+
+[metadata]
+material = ultimaker_nylon_175
+quality_type = draft
+setting_version = 25
+type = quality
+variant = LABS
+weight = -2
+
+[values]
+cool_fan_enabled = True
+cool_fan_speed = 0
+cool_fan_speed_max = 0
+cool_min_layer_time = 8
+cool_min_speed = 10
+cool_min_temperature = 250
+material_final_print_temperature = =default_material_print_temperature-5
+material_initial_print_temperature = =default_material_print_temperature-5
+raft_airgap = 0.3
+raft_base_flow = 105
+raft_base_line_width = 1.2
+raft_base_speed = 10
+raft_base_thickness = 0.6
+raft_interface_thickness = 0.25
+retraction_amount = 0.5
+retraction_min_travel = 3.2ƒ√
+small_skin_width = 3.6
+speed_prime_tower = =speed_print
+speed_print = 50
+speed_roofing = =speed_print * 3/5
+speed_topbottom = =speed_roofing
+speed_wall = =speed_print * 3/5
+speed_wall_0 = =speed_wall * 5/6
+speed_wall_x = =speed_wall
+support_angle = 30
+support_bottom_density = 24
+support_bottom_distance = =layer_height
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_infill_rate = =0 if support_structure == tree else 12.0
+support_interface_height = 0.406
+support_interface_material_flow = 95
+support_interface_pattern = lines
+support_line_width = =line_width * 0.75
+support_material_flow = 92
+support_roof_density = 50
+support_roof_height = =support_interface_height
+support_structure = tree
+support_supported_skin_fan_speed = 75
+support_wall_count = 1
+support_xy_distance = 0.3
+support_z_distance = 0.3
+
diff --git a/resources/quality/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm.inst.cfg
new file mode 100644
index 0000000000..dd622e65bf
--- /dev/null
+++ b/resources/quality/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm.inst.cfg
@@ -0,0 +1,58 @@
+[general]
+definition = ultimaker_methodx
+name = Fast
+version = 4
+
+[metadata]
+material = ultimaker_nylon_175
+quality_type = draft
+setting_version = 25
+type = quality
+variant = 1A
+weight = -2
+
+[values]
+cool_fan_enabled = True
+cool_fan_speed = 0
+cool_fan_speed_max = 0
+cool_min_layer_time = 8
+cool_min_speed = 10
+cool_min_temperature = 250
+material_final_print_temperature = =default_material_print_temperature-5
+material_initial_print_temperature = =default_material_print_temperature-5
+raft_airgap = 0.3
+raft_base_flow = 105
+raft_base_line_width = 1.2
+raft_base_speed = 10
+raft_base_thickness = 0.6
+raft_interface_thickness = 0.25
+retraction_amount = 0.5
+retraction_min_travel = 3.2ƒ√
+small_skin_width = 3.6
+speed_prime_tower = =speed_print
+speed_print = 50
+speed_roofing = =speed_print * 3/5
+speed_topbottom = =speed_roofing
+speed_wall = =speed_print * 3/5
+speed_wall_0 = =speed_wall * 5/6
+speed_wall_x = =speed_wall
+support_angle = 30
+support_bottom_density = 24
+support_bottom_distance = =layer_height
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_infill_rate = =0 if support_structure == tree else 12.0
+support_interface_height = 0.406
+support_interface_material_flow = 95
+support_interface_pattern = lines
+support_line_width = =line_width * 0.75
+support_material_flow = 92
+support_roof_density = 50
+support_roof_height = =support_interface_height
+support_structure = tree
+support_supported_skin_fan_speed = 75
+support_wall_count = 1
+support_xy_distance = 0.3
+support_z_distance = 0.3
+
diff --git a/resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm.inst.cfg
new file mode 100644
index 0000000000..8aef5be946
--- /dev/null
+++ b/resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm.inst.cfg
@@ -0,0 +1,58 @@
+[general]
+definition = ultimaker_methodx
+name = Fast
+version = 4
+
+[metadata]
+material = ultimaker_nylon_175
+quality_type = draft
+setting_version = 25
+type = quality
+variant = 1C
+weight = -2
+
+[values]
+cool_fan_enabled = True
+cool_fan_speed = 0
+cool_fan_speed_max = 0
+cool_min_layer_time = 8
+cool_min_speed = 10
+cool_min_temperature = 250
+material_final_print_temperature = =default_material_print_temperature-5
+material_initial_print_temperature = =default_material_print_temperature-5
+raft_airgap = 0.3
+raft_base_flow = 105
+raft_base_line_width = 1.2
+raft_base_speed = 10
+raft_base_thickness = 0.6
+raft_interface_thickness = 0.25
+retraction_amount = 0.5
+retraction_min_travel = 3.2ƒ√
+small_skin_width = 3.6
+speed_prime_tower = =speed_print
+speed_print = 50
+speed_roofing = =speed_print * 3/5
+speed_topbottom = =speed_roofing
+speed_wall = =speed_print * 3/5
+speed_wall_0 = =speed_wall * 5/6
+speed_wall_x = =speed_wall
+support_angle = 30
+support_bottom_density = 24
+support_bottom_distance = =layer_height
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_infill_rate = =0 if support_structure == tree else 12.0
+support_interface_height = 0.406
+support_interface_material_flow = 95
+support_interface_pattern = lines
+support_line_width = =line_width * 0.75
+support_material_flow = 92
+support_roof_density = 50
+support_roof_height = =support_interface_height
+support_structure = tree
+support_supported_skin_fan_speed = 75
+support_wall_count = 1
+support_xy_distance = 0.3
+support_z_distance = 0.3
+
diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm.inst.cfg
new file mode 100644
index 0000000000..08e5a9f7a2
--- /dev/null
+++ b/resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm.inst.cfg
@@ -0,0 +1,58 @@
+[general]
+definition = ultimaker_methodx
+name = Fast
+version = 4
+
+[metadata]
+material = ultimaker_nylon_175
+quality_type = draft
+setting_version = 25
+type = quality
+variant = LABS
+weight = -2
+
+[values]
+cool_fan_enabled = True
+cool_fan_speed = 0
+cool_fan_speed_max = 0
+cool_min_layer_time = 8
+cool_min_speed = 10
+cool_min_temperature = 250
+material_final_print_temperature = =default_material_print_temperature-5
+material_initial_print_temperature = =default_material_print_temperature-5
+raft_airgap = 0.3
+raft_base_flow = 105
+raft_base_line_width = 1.2
+raft_base_speed = 10
+raft_base_thickness = 0.6
+raft_interface_thickness = 0.25
+retraction_amount = 0.5
+retraction_min_travel = 3.2ƒ√
+small_skin_width = 3.6
+speed_prime_tower = =speed_print
+speed_print = 50
+speed_roofing = =speed_print * 3/5
+speed_topbottom = =speed_roofing
+speed_wall = =speed_print * 3/5
+speed_wall_0 = =speed_wall * 5/6
+speed_wall_x = =speed_wall
+support_angle = 30
+support_bottom_density = 24
+support_bottom_distance = =layer_height
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_infill_rate = =0 if support_structure == tree else 12.0
+support_interface_height = 0.406
+support_interface_material_flow = 95
+support_interface_pattern = lines
+support_line_width = =line_width * 0.75
+support_material_flow = 92
+support_roof_density = 50
+support_roof_height = =support_interface_height
+support_structure = tree
+support_supported_skin_fan_speed = 75
+support_wall_count = 1
+support_xy_distance = 0.3
+support_z_distance = 0.3
+