Added experimental print profiles for the Method X and XL: ASA, Nylon12-CF and SR-30 support material.

PP-393

resources/definitions/ultimaker_methodx.def.json

@@ -35,7 +35,6 @@
             "generic_nylon_175",
             "generic_hips_175",
             "generic_pc_175",
-            "ultimaker_sr30_175",
             "generic_tpu_175",
             "goofoo_",
             "ideagen3D_",

resources/intent/ultimaker_methodx/um_methodx_1c_um-asa-175_0.2mm_solid.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_methodx
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+is_experimental = True
+material = ultimaker_asa_175
+quality_type = draft
+setting_version = 22
+type = intent
+variant = 1C
+
+[values]
+infill_pattern = lines
+infill_sparse_density = 100
+

resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon12-cf-175_0.2mm_solid.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_methodx
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+is_experimental = True
+material = ultimaker_nylon12-cf_175
+quality_type = draft
+setting_version = 22
+type = intent
+variant = 1C
+
+[values]
+infill_pattern = lines
+infill_sparse_density = 100
+

resources/intent/ultimaker_methodx/um_methodx_1xa_um-asa-175_0.2mm_solid.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_methodx
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+is_experimental = True
+material = ultimaker_asa_175
+quality_type = draft
+setting_version = 22
+type = intent
+variant = 1XA
+
+[values]
+infill_pattern = lines
+infill_sparse_density = 100
+

resources/intent/ultimaker_methodx/um_methodx_2xa_um-sr30-175_0.2mm_solid.inst.cfg

@@ -0,0 +1,17 @@
+[general]
+definition = ultimaker_methodx
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+is_experimental = True
+material = ultimaker_sr30_175
+quality_type = draft
+setting_version = 22
+type = intent
+variant = 2XA
+
+[values]
+infill_sparse_density = 100
+

resources/intent/ultimaker_methodx/um_methodx_labs_um-asa-175_0.2mm_solid.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_methodx
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+is_experimental = True
+material = ultimaker_asa_175
+quality_type = draft
+setting_version = 22
+type = intent
+variant = LABS
+
+[values]
+infill_pattern = lines
+infill_sparse_density = 100
+

resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon12-cf-175_0.2mm_solid.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_methodx
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+is_experimental = True
+material = ultimaker_nylon12-cf_175
+quality_type = draft
+setting_version = 22
+type = intent
+variant = LABS
+
+[values]
+infill_pattern = lines
+infill_sparse_density = 100
+

resources/intent/ultimaker_methodxl/um_methodxl_1c_um-asa-175_0.2mm_solid.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_methodxl
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+is_experimental = True
+material = ultimaker_asa_175
+quality_type = draft
+setting_version = 22
+type = intent
+variant = 1C
+
+[values]
+infill_pattern = lines
+infill_sparse_density = 100
+

resources/intent/ultimaker_methodxl/um_methodxl_1c_um-nylon12-cf-175_0.2mm_solid.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_methodxl
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+is_experimental = True
+material = ultimaker_nylon12-cf_175
+quality_type = draft
+setting_version = 22
+type = intent
+variant = 1C
+
+[values]
+infill_pattern = lines
+infill_sparse_density = 100
+

resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-asa-175_0.2mm_solid.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_methodxl
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+is_experimental = True
+material = ultimaker_asa_175
+quality_type = draft
+setting_version = 22
+type = intent
+variant = 1XA
+
+[values]
+infill_pattern = lines
+infill_sparse_density = 100
+

resources/intent/ultimaker_methodxl/um_methodxl_2xa_um-sr30-175_0.2mm_solid.inst.cfg

@@ -0,0 +1,17 @@
+[general]
+definition = ultimaker_methodxl
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+is_experimental = True
+material = ultimaker_sr30_175
+quality_type = draft
+setting_version = 22
+type = intent
+variant = 2XA
+
+[values]
+infill_sparse_density = 100
+

resources/intent/ultimaker_methodxl/um_methodxl_labs_um-asa-175_0.2mm_solid.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_methodxl
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+is_experimental = True
+material = ultimaker_asa_175
+quality_type = draft
+setting_version = 22
+type = intent
+variant = LABS
+
+[values]
+infill_pattern = lines
+infill_sparse_density = 100
+

resources/intent/ultimaker_methodxl/um_methodxl_labs_um-nylon12-cf-175_0.2mm_solid.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_methodxl
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+is_experimental = True
+material = ultimaker_nylon12-cf_175
+quality_type = draft
+setting_version = 22
+type = intent
+variant = LABS
+
+[values]
+infill_pattern = lines
+infill_sparse_density = 100
+

resources/quality/ultimaker_methodx/um_methodx_1c_um-asa-175_0.2mm.inst.cfg

@@ -0,0 +1,50 @@
+[general]
+definition = ultimaker_methodx
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_asa_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 1C
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_print_temperature_layer_0 = =default_material_print_temperature+5
+raft_airgap = 0.3
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 98.0
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 250.0
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+

resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon12-cf-175_0.2mm.inst.cfg

@@ -0,0 +1,53 @@
+[general]
+definition = ultimaker_methodx
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_nylon12-cf_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 1C
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_final_print_temperature = =default_material_print_temperature-5
+material_initial_print_temperature = =default_material_print_temperature-5
+raft_airgap = 0.3
+raft_base_line_spacing = 3
+raft_base_line_width = 1.2
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 100
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 250.0
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+

resources/quality/ultimaker_methodx/um_methodx_1xa_um-asa-175_0.2mm.inst.cfg

@@ -0,0 +1,50 @@
+[general]
+definition = ultimaker_methodx
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_asa_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 1XA
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_print_temperature_layer_0 = =default_material_print_temperature+5
+raft_airgap = 0.3
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 98.0
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 250.0
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+

resources/quality/ultimaker_methodx/um_methodx_2xa_um-sr30-175_0.2mm.inst.cfg

@@ -0,0 +1,41 @@
+[general]
+definition = ultimaker_methodx
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_sr30_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 2XA
+weight = -2
+
+[values]
+brim_replaces_support = False
+cool_fan_enabled = False
+cool_min_temperature = =material_print_temperature
+raft_airgap = 0.0
+raft_interface_line_width = 0.7
+raft_interface_speed = 70
+raft_surface_speed = 90
+retract_at_layer_change = True
+retraction_amount = 0.5
+speed_prime_tower = 25.0
+speed_print = 50
+speed_roofing = 50
+speed_support = 50
+speed_support_bottom = 30
+speed_support_interface = 80
+speed_topbottom = 50
+speed_wall_0 = 50
+speed_wall_x = 50
+support_bottom_wall_count = 5
+support_fan_enable = False
+support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height
+support_interface_enable = True
+support_wall_count = 1
+support_xy_distance = 0.2
+support_z_distance = 0
+

resources/quality/ultimaker_methodx/um_methodx_labs_um-asa-175_0.2mm.inst.cfg

@@ -0,0 +1,50 @@
+[general]
+definition = ultimaker_methodx
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_asa_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = LABS
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_print_temperature_layer_0 = =default_material_print_temperature+5
+raft_airgap = 0.3
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 98.0
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 250.0
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+

resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon12-cf-175_0.2mm.inst.cfg

@@ -0,0 +1,53 @@
+[general]
+definition = ultimaker_methodx
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_nylon12-cf_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = LABS
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_final_print_temperature = =default_material_print_temperature-5
+material_initial_print_temperature = =default_material_print_temperature-5
+raft_airgap = 0.3
+raft_base_line_spacing = 3
+raft_base_line_width = 1.2
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 100
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 250.0
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+

resources/quality/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm.inst.cfg

@@ -12,9 +12,7 @@ variant = 1C
 weight = -2
 
 [values]
-build_volume_temperature = 85
 cool_fan_enabled = False
-default_material_bed_temperature = 95
 raft_airgap = 0.3
 speed_prime_tower = 30.0
 speed_print = 120.0

resources/quality/ultimaker_methodxl/um_methodxl_1c_um-asa-175_0.2mm.inst.cfg

@@ -0,0 +1,51 @@
+[general]
+definition = ultimaker_methodxl
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_asa_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 1C
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_print_temperature_layer_0 = =default_material_print_temperature+5
+raft_airgap = 0.3
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 98.0
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+

resources/quality/ultimaker_methodxl/um_methodxl_1c_um-nylon12-cf-175_0.2mm.inst.cfg

@@ -0,0 +1,53 @@
+[general]
+definition = ultimaker_methodxl
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_nylon12-cf_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 1C
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_final_print_temperature = =default_material_print_temperature-5
+material_initial_print_temperature = =default_material_print_temperature-5
+raft_airgap = 0.3
+raft_base_line_spacing = 3
+raft_base_line_width = 1.2
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 100
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 250.0
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+

resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm.inst.cfg

@@ -12,9 +12,7 @@ variant = 1XA
 weight = -2
 
 [values]
-build_volume_temperature = 85
 cool_fan_enabled = False
-default_material_bed_temperature = 95
 raft_airgap = 0.3
 speed_prime_tower = 30.0
 speed_print = 120.0

resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-asa-175_0.2mm.inst.cfg

@@ -0,0 +1,51 @@
+[general]
+definition = ultimaker_methodxl
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_asa_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 1XA
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_print_temperature_layer_0 = =default_material_print_temperature+5
+raft_airgap = 0.3
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 98.0
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+

resources/quality/ultimaker_methodxl/um_methodxl_2xa_um-sr30-175_0.2mm.inst.cfg

@@ -0,0 +1,41 @@
+[general]
+definition = ultimaker_methodxl
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_sr30_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 2XA
+weight = -2
+
+[values]
+brim_replaces_support = False
+cool_fan_enabled = False
+cool_min_temperature = =material_print_temperature
+raft_airgap = 0.0
+raft_interface_line_width = 0.7
+raft_interface_speed = 70
+raft_surface_speed = 90
+retract_at_layer_change = True
+retraction_amount = 0.5
+speed_prime_tower = 25.0
+speed_print = 50
+speed_roofing = 50
+speed_support = 50
+speed_support_bottom = 30
+speed_support_interface = 80
+speed_topbottom = 50
+speed_wall_0 = 50
+speed_wall_x = 50
+support_bottom_wall_count = 5
+support_fan_enable = False
+support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height
+support_interface_enable = True
+support_wall_count = 1
+support_xy_distance = 0.2
+support_z_distance = 0
+

resources/quality/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm.inst.cfg

@@ -12,9 +12,7 @@ variant = LABS
 weight = -2
 
 [values]
-build_volume_temperature = 85
 cool_fan_enabled = False
-default_material_bed_temperature = 95
 raft_airgap = 0.3
 speed_prime_tower = 30.0
 speed_print = 120.0

resources/quality/ultimaker_methodxl/um_methodxl_labs_um-asa-175_0.2mm.inst.cfg

@@ -0,0 +1,51 @@
+[general]
+definition = ultimaker_methodxl
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_asa_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = LABS
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_print_temperature_layer_0 = =default_material_print_temperature+5
+raft_airgap = 0.3
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 98.0
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+

resources/quality/ultimaker_methodxl/um_methodxl_labs_um-nylon12-cf-175_0.2mm.inst.cfg

@@ -0,0 +1,53 @@
+[general]
+definition = ultimaker_methodxl
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_nylon12-cf_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = LABS
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_final_print_temperature = =default_material_print_temperature-5
+material_initial_print_temperature = =default_material_print_temperature-5
+raft_airgap = 0.3
+raft_base_line_spacing = 3
+raft_base_line_width = 1.2
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 100
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 250.0
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+

resources/quality/ultimaker_s3/um_s3_aa0.25_um-abs_0.1mm.inst.cfg

@@ -27,6 +27,7 @@ acceleration_wall_x = =acceleration_wall
 bridge_skin_speed = =bridge_wall_speed
 bridge_sparse_infill_max_density = 50
 bridge_wall_speed = 30
+cool_fan_speed_0 = 0
 cool_min_layer_time = 4
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 infill_sparse_density = 15

resources/quality/ultimaker_s5/um_s5_aa0.25_um-abs_0.1mm.inst.cfg

@@ -27,6 +27,7 @@ acceleration_wall_x = =acceleration_wall
 bridge_skin_speed = =bridge_wall_speed
 bridge_sparse_infill_max_density = 50
 bridge_wall_speed = 30
+cool_fan_speed_0 = 0
 cool_min_layer_time = 4
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 infill_sparse_density = 15