diff --git a/resources/definitions/ultimaker_methodx.def.json b/resources/definitions/ultimaker_methodx.def.json
index a6708a0421..9828ba96f2 100644
--- a/resources/definitions/ultimaker_methodx.def.json
+++ b/resources/definitions/ultimaker_methodx.def.json
@@ -35,7 +35,6 @@
             "generic_nylon_175",
             "generic_hips_175",
             "generic_pc_175",
-            "ultimaker_sr30_175",
             "generic_tpu_175",
             "goofoo_",
             "ideagen3D_",
diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-asa-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-asa-175_0.2mm_solid.inst.cfg
new file mode 100644
index 0000000000..23c8807afd
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-asa-175_0.2mm_solid.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_methodx
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+is_experimental = True
+material = ultimaker_asa_175
+quality_type = draft
+setting_version = 22
+type = intent
+variant = 1C
+
+[values]
+infill_pattern = lines
+infill_sparse_density = 100
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon12-cf-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon12-cf-175_0.2mm_solid.inst.cfg
new file mode 100644
index 0000000000..cdff2f30ce
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon12-cf-175_0.2mm_solid.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_methodx
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+is_experimental = True
+material = ultimaker_nylon12-cf_175
+quality_type = draft
+setting_version = 22
+type = intent
+variant = 1C
+
+[values]
+infill_pattern = lines
+infill_sparse_density = 100
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_1xa_um-asa-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1xa_um-asa-175_0.2mm_solid.inst.cfg
new file mode 100644
index 0000000000..3a781b61aa
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_1xa_um-asa-175_0.2mm_solid.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_methodx
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+is_experimental = True
+material = ultimaker_asa_175
+quality_type = draft
+setting_version = 22
+type = intent
+variant = 1XA
+
+[values]
+infill_pattern = lines
+infill_sparse_density = 100
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_2xa_um-sr30-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_2xa_um-sr30-175_0.2mm_solid.inst.cfg
new file mode 100644
index 0000000000..a833556bd8
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_2xa_um-sr30-175_0.2mm_solid.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+definition = ultimaker_methodx
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+is_experimental = True
+material = ultimaker_sr30_175
+quality_type = draft
+setting_version = 22
+type = intent
+variant = 2XA
+
+[values]
+infill_sparse_density = 100
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-asa-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-asa-175_0.2mm_solid.inst.cfg
new file mode 100644
index 0000000000..87823a01a6
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-asa-175_0.2mm_solid.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_methodx
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+is_experimental = True
+material = ultimaker_asa_175
+quality_type = draft
+setting_version = 22
+type = intent
+variant = LABS
+
+[values]
+infill_pattern = lines
+infill_sparse_density = 100
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon12-cf-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon12-cf-175_0.2mm_solid.inst.cfg
new file mode 100644
index 0000000000..bb76919888
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon12-cf-175_0.2mm_solid.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_methodx
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+is_experimental = True
+material = ultimaker_nylon12-cf_175
+quality_type = draft
+setting_version = 22
+type = intent
+variant = LABS
+
+[values]
+infill_pattern = lines
+infill_sparse_density = 100
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-asa-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-asa-175_0.2mm_solid.inst.cfg
new file mode 100644
index 0000000000..12bc3f2708
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-asa-175_0.2mm_solid.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_methodxl
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+is_experimental = True
+material = ultimaker_asa_175
+quality_type = draft
+setting_version = 22
+type = intent
+variant = 1C
+
+[values]
+infill_pattern = lines
+infill_sparse_density = 100
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-nylon12-cf-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-nylon12-cf-175_0.2mm_solid.inst.cfg
new file mode 100644
index 0000000000..5533672636
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-nylon12-cf-175_0.2mm_solid.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_methodxl
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+is_experimental = True
+material = ultimaker_nylon12-cf_175
+quality_type = draft
+setting_version = 22
+type = intent
+variant = 1C
+
+[values]
+infill_pattern = lines
+infill_sparse_density = 100
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-asa-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-asa-175_0.2mm_solid.inst.cfg
new file mode 100644
index 0000000000..82aa8e9bad
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-asa-175_0.2mm_solid.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_methodxl
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+is_experimental = True
+material = ultimaker_asa_175
+quality_type = draft
+setting_version = 22
+type = intent
+variant = 1XA
+
+[values]
+infill_pattern = lines
+infill_sparse_density = 100
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_2xa_um-sr30-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_2xa_um-sr30-175_0.2mm_solid.inst.cfg
new file mode 100644
index 0000000000..01a55c85a4
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_2xa_um-sr30-175_0.2mm_solid.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+definition = ultimaker_methodxl
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+is_experimental = True
+material = ultimaker_sr30_175
+quality_type = draft
+setting_version = 22
+type = intent
+variant = 2XA
+
+[values]
+infill_sparse_density = 100
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-asa-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-asa-175_0.2mm_solid.inst.cfg
new file mode 100644
index 0000000000..ae7100bc86
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-asa-175_0.2mm_solid.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_methodxl
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+is_experimental = True
+material = ultimaker_asa_175
+quality_type = draft
+setting_version = 22
+type = intent
+variant = LABS
+
+[values]
+infill_pattern = lines
+infill_sparse_density = 100
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-nylon12-cf-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-nylon12-cf-175_0.2mm_solid.inst.cfg
new file mode 100644
index 0000000000..af43c95cd2
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-nylon12-cf-175_0.2mm_solid.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_methodxl
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+is_experimental = True
+material = ultimaker_nylon12-cf_175
+quality_type = draft
+setting_version = 22
+type = intent
+variant = LABS
+
+[values]
+infill_pattern = lines
+infill_sparse_density = 100
+
diff --git a/resources/quality/ultimaker_methodx/um_methodx_1c_um-asa-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1c_um-asa-175_0.2mm.inst.cfg
new file mode 100644
index 0000000000..f0e0a4fded
--- /dev/null
+++ b/resources/quality/ultimaker_methodx/um_methodx_1c_um-asa-175_0.2mm.inst.cfg
@@ -0,0 +1,50 @@
+[general]
+definition = ultimaker_methodx
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_asa_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 1C
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_print_temperature_layer_0 = =default_material_print_temperature+5
+raft_airgap = 0.3
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 98.0
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 250.0
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+
diff --git a/resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon12-cf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon12-cf-175_0.2mm.inst.cfg
new file mode 100644
index 0000000000..32d64ed5b1
--- /dev/null
+++ b/resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon12-cf-175_0.2mm.inst.cfg
@@ -0,0 +1,53 @@
+[general]
+definition = ultimaker_methodx
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_nylon12-cf_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 1C
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_final_print_temperature = =default_material_print_temperature-5
+material_initial_print_temperature = =default_material_print_temperature-5
+raft_airgap = 0.3
+raft_base_line_spacing = 3
+raft_base_line_width = 1.2
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 100
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 250.0
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+
diff --git a/resources/quality/ultimaker_methodx/um_methodx_1xa_um-asa-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1xa_um-asa-175_0.2mm.inst.cfg
new file mode 100644
index 0000000000..e032e3a3b8
--- /dev/null
+++ b/resources/quality/ultimaker_methodx/um_methodx_1xa_um-asa-175_0.2mm.inst.cfg
@@ -0,0 +1,50 @@
+[general]
+definition = ultimaker_methodx
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_asa_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 1XA
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_print_temperature_layer_0 = =default_material_print_temperature+5
+raft_airgap = 0.3
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 98.0
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 250.0
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+
diff --git a/resources/quality/ultimaker_methodx/um_methodx_2xa_um-sr30-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_2xa_um-sr30-175_0.2mm.inst.cfg
new file mode 100644
index 0000000000..5ebc2b4560
--- /dev/null
+++ b/resources/quality/ultimaker_methodx/um_methodx_2xa_um-sr30-175_0.2mm.inst.cfg
@@ -0,0 +1,41 @@
+[general]
+definition = ultimaker_methodx
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_sr30_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 2XA
+weight = -2
+
+[values]
+brim_replaces_support = False
+cool_fan_enabled = False
+cool_min_temperature = =material_print_temperature
+raft_airgap = 0.0
+raft_interface_line_width = 0.7
+raft_interface_speed = 70
+raft_surface_speed = 90
+retract_at_layer_change = True
+retraction_amount = 0.5
+speed_prime_tower = 25.0
+speed_print = 50
+speed_roofing = 50
+speed_support = 50
+speed_support_bottom = 30
+speed_support_interface = 80
+speed_topbottom = 50
+speed_wall_0 = 50
+speed_wall_x = 50
+support_bottom_wall_count = 5
+support_fan_enable = False
+support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height
+support_interface_enable = True
+support_wall_count = 1
+support_xy_distance = 0.2
+support_z_distance = 0
+
diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_um-asa-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_um-asa-175_0.2mm.inst.cfg
new file mode 100644
index 0000000000..3c9f4500fc
--- /dev/null
+++ b/resources/quality/ultimaker_methodx/um_methodx_labs_um-asa-175_0.2mm.inst.cfg
@@ -0,0 +1,50 @@
+[general]
+definition = ultimaker_methodx
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_asa_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = LABS
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_print_temperature_layer_0 = =default_material_print_temperature+5
+raft_airgap = 0.3
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 98.0
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 250.0
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+
diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon12-cf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon12-cf-175_0.2mm.inst.cfg
new file mode 100644
index 0000000000..7bb14d9107
--- /dev/null
+++ b/resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon12-cf-175_0.2mm.inst.cfg
@@ -0,0 +1,53 @@
+[general]
+definition = ultimaker_methodx
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_nylon12-cf_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = LABS
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_final_print_temperature = =default_material_print_temperature-5
+material_initial_print_temperature = =default_material_print_temperature-5
+raft_airgap = 0.3
+raft_base_line_spacing = 3
+raft_base_line_width = 1.2
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 100
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 250.0
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm.inst.cfg
index 7b5daf0d20..2688d88ad3 100644
--- a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm.inst.cfg
@@ -12,9 +12,7 @@ variant = 1C
 weight = -2
 
 [values]
-build_volume_temperature = 85
 cool_fan_enabled = False
-default_material_bed_temperature = 95
 raft_airgap = 0.3
 speed_prime_tower = 30.0
 speed_print = 120.0
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-asa-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-asa-175_0.2mm.inst.cfg
new file mode 100644
index 0000000000..5aaee1f2c6
--- /dev/null
+++ b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-asa-175_0.2mm.inst.cfg
@@ -0,0 +1,51 @@
+[general]
+definition = ultimaker_methodxl
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_asa_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 1C
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_print_temperature_layer_0 = =default_material_print_temperature+5
+raft_airgap = 0.3
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 98.0
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-nylon12-cf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-nylon12-cf-175_0.2mm.inst.cfg
new file mode 100644
index 0000000000..575189deae
--- /dev/null
+++ b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-nylon12-cf-175_0.2mm.inst.cfg
@@ -0,0 +1,53 @@
+[general]
+definition = ultimaker_methodxl
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_nylon12-cf_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 1C
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_final_print_temperature = =default_material_print_temperature-5
+material_initial_print_temperature = =default_material_print_temperature-5
+raft_airgap = 0.3
+raft_base_line_spacing = 3
+raft_base_line_width = 1.2
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 100
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 250.0
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm.inst.cfg
index 7445bd2d42..fd224e8798 100644
--- a/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm.inst.cfg
@@ -12,9 +12,7 @@ variant = 1XA
 weight = -2
 
 [values]
-build_volume_temperature = 85
 cool_fan_enabled = False
-default_material_bed_temperature = 95
 raft_airgap = 0.3
 speed_prime_tower = 30.0
 speed_print = 120.0
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-asa-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-asa-175_0.2mm.inst.cfg
new file mode 100644
index 0000000000..504ab8c10b
--- /dev/null
+++ b/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-asa-175_0.2mm.inst.cfg
@@ -0,0 +1,51 @@
+[general]
+definition = ultimaker_methodxl
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_asa_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 1XA
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_print_temperature_layer_0 = =default_material_print_temperature+5
+raft_airgap = 0.3
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 98.0
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_2xa_um-sr30-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_2xa_um-sr30-175_0.2mm.inst.cfg
new file mode 100644
index 0000000000..ebc6ecfe98
--- /dev/null
+++ b/resources/quality/ultimaker_methodxl/um_methodxl_2xa_um-sr30-175_0.2mm.inst.cfg
@@ -0,0 +1,41 @@
+[general]
+definition = ultimaker_methodxl
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_sr30_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 2XA
+weight = -2
+
+[values]
+brim_replaces_support = False
+cool_fan_enabled = False
+cool_min_temperature = =material_print_temperature
+raft_airgap = 0.0
+raft_interface_line_width = 0.7
+raft_interface_speed = 70
+raft_surface_speed = 90
+retract_at_layer_change = True
+retraction_amount = 0.5
+speed_prime_tower = 25.0
+speed_print = 50
+speed_roofing = 50
+speed_support = 50
+speed_support_bottom = 30
+speed_support_interface = 80
+speed_topbottom = 50
+speed_wall_0 = 50
+speed_wall_x = 50
+support_bottom_wall_count = 5
+support_fan_enable = False
+support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height
+support_interface_enable = True
+support_wall_count = 1
+support_xy_distance = 0.2
+support_z_distance = 0
+
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm.inst.cfg
index 2114be0ff4..4af8230b24 100644
--- a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm.inst.cfg
@@ -12,9 +12,7 @@ variant = LABS
 weight = -2
 
 [values]
-build_volume_temperature = 85
 cool_fan_enabled = False
-default_material_bed_temperature = 95
 raft_airgap = 0.3
 speed_prime_tower = 30.0
 speed_print = 120.0
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-asa-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-asa-175_0.2mm.inst.cfg
new file mode 100644
index 0000000000..14c15fd3c5
--- /dev/null
+++ b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-asa-175_0.2mm.inst.cfg
@@ -0,0 +1,51 @@
+[general]
+definition = ultimaker_methodxl
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_asa_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = LABS
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_print_temperature_layer_0 = =default_material_print_temperature+5
+raft_airgap = 0.3
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 98.0
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-nylon12-cf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-nylon12-cf-175_0.2mm.inst.cfg
new file mode 100644
index 0000000000..110fa5e4b5
--- /dev/null
+++ b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-nylon12-cf-175_0.2mm.inst.cfg
@@ -0,0 +1,53 @@
+[general]
+definition = ultimaker_methodxl
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_nylon12-cf_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = LABS
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_final_print_temperature = =default_material_print_temperature-5
+material_initial_print_temperature = =default_material_print_temperature-5
+raft_airgap = 0.3
+raft_base_line_spacing = 3
+raft_base_line_width = 1.2
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 100
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 250.0
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-abs_0.1mm.inst.cfg
index 24c5a1d9e6..f989bcc3f6 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-abs_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-abs_0.1mm.inst.cfg
@@ -27,6 +27,7 @@ acceleration_wall_x = =acceleration_wall
 bridge_skin_speed = =bridge_wall_speed
 bridge_sparse_infill_max_density = 50
 bridge_wall_speed = 30
+cool_fan_speed_0 = 0
 cool_min_layer_time = 4
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 infill_sparse_density = 15
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_um-abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-abs_0.1mm.inst.cfg
index 7b14730a66..29057ff13b 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_um-abs_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-abs_0.1mm.inst.cfg
@@ -27,6 +27,7 @@ acceleration_wall_x = =acceleration_wall
 bridge_skin_speed = =bridge_wall_speed
 bridge_sparse_infill_max_density = 50
 bridge_wall_speed = 30
+cool_fan_speed_0 = 0
 cool_min_layer_time = 4
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 infill_sparse_density = 15