Merge branch '5.11' into PP-687-Top-surface-extension-for-high-speed

2026-02-15 17:09:33 -07:00 · 2025-10-16 10:47:02 +02:00 · 2025-10-16 10:47:02 +02:00 · 272d50c128
commit 272d50c128
parent 18b83bf777 acc99b8f4d
21 changed files with 39 additions and 47 deletions
--- a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm_engineering.inst.cfg
+++ b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm_engineering.inst.cfg
@ -12,11 +12,11 @@ type = intent
 variant = AA+ 0.4

 [values]
-hole_xy_offset = 0.075
+hole_xy_offset = 0.1
 infill_sparse_density = 20
 initial_bottom_layers = =bottom_layers
-inset_direction = outside_in
+inset_direction = inside_out
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 4
-xy_offset = 0.075
+xy_offset = 0.025

--- a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_cpe-plus_0.2mm_engineering.inst.cfg
+++ b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_cpe-plus_0.2mm_engineering.inst.cfg
@ -12,11 +12,11 @@ type = intent
 variant = AA+ 0.4

 [values]
-hole_xy_offset = 0.075
+hole_xy_offset = 0.1
 infill_sparse_density = 20
 initial_bottom_layers = =bottom_layers
-inset_direction = outside_in
+inset_direction = inside_out
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 4
-xy_offset = 0.075
+xy_offset = 0.025

--- a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_cpe_0.2mm_engineering.inst.cfg
+++ b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_cpe_0.2mm_engineering.inst.cfg
@ -12,11 +12,11 @@ type = intent
 variant = AA+ 0.4

 [values]
-hole_xy_offset = 0.075
+hole_xy_offset = 0.1
 infill_sparse_density = 20
 initial_bottom_layers = =bottom_layers
-inset_direction = outside_in
+inset_direction = inside_out
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 4
-xy_offset = 0.075
+xy_offset = 0.025

--- a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_pc_0.2mm_engineering.inst.cfg
+++ b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_pc_0.2mm_engineering.inst.cfg
@ -12,11 +12,11 @@ type = intent
 variant = AA+ 0.4

 [values]
-hole_xy_offset = 0.075
+hole_xy_offset = 0.1
 infill_sparse_density = 20
 initial_bottom_layers = =bottom_layers
-inset_direction = outside_in
+inset_direction = inside_out
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 4
-xy_offset = 0.075
+xy_offset = 0.025

--- a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm_engineering.inst.cfg
+++ b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm_engineering.inst.cfg
@ -12,11 +12,11 @@ type = intent
 variant = AA+ 0.4

 [values]
-hole_xy_offset = 0.075
+hole_xy_offset = 0.1
 infill_sparse_density = 20
 initial_bottom_layers = =bottom_layers
-inset_direction = outside_in
+inset_direction = inside_out
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 4
-xy_offset = 0.075
+xy_offset = 0.025

--- a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm_engineering.inst.cfg
+++ b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm_engineering.inst.cfg
@ -12,11 +12,11 @@ type = intent
 variant = AA+ 0.4

 [values]
-hole_xy_offset = 0.075
+hole_xy_offset = 0.1
 infill_sparse_density = 20
 initial_bottom_layers = =bottom_layers
-inset_direction = outside_in
+inset_direction = inside_out
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 4
-xy_offset = 0.075
+xy_offset = 0.025

--- a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm_engineering.inst.cfg
+++ b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm_engineering.inst.cfg
@ -12,11 +12,11 @@ type = intent
 variant = AA+ 0.4

 [values]
-hole_xy_offset = 0.075
+hole_xy_offset = 0.1
 infill_sparse_density = 20
 initial_bottom_layers = =bottom_layers
-inset_direction = outside_in
+inset_direction = inside_out
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 4
-xy_offset = 0.075
+xy_offset = 0.025

--- a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_cpe-plus_0.2mm_engineering.inst.cfg
+++ b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_cpe-plus_0.2mm_engineering.inst.cfg
@ -13,11 +13,11 @@ type = intent
 variant = CC+ 0.4

 [values]
-hole_xy_offset = 0.075
+hole_xy_offset = 0.1
 infill_sparse_density = 20
 initial_bottom_layers = =bottom_layers
-inset_direction = outside_in
+inset_direction = inside_out
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 4
-xy_offset = 0.075
+xy_offset = 0.025

--- a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_nylon-cf-slide_0.2mm_engineering.inst.cfg
+++ b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_nylon-cf-slide_0.2mm_engineering.inst.cfg
@ -13,11 +13,11 @@ type = intent
 variant = CC+ 0.4

 [values]
-hole_xy_offset = 0.075
+hole_xy_offset = 0.1
 infill_sparse_density = 20
 initial_bottom_layers = =bottom_layers
-inset_direction = outside_in
+inset_direction = inside_out
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 4
-xy_offset = 0.075
+xy_offset = 0.025

--- a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_pc_0.2mm_engineering.inst.cfg
+++ b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_pc_0.2mm_engineering.inst.cfg
@ -13,11 +13,11 @@ type = intent
 variant = CC+ 0.4

 [values]
-hole_xy_offset = 0.075
+hole_xy_offset = 0.1
 infill_sparse_density = 20
 initial_bottom_layers = =bottom_layers
-inset_direction = outside_in
+inset_direction = inside_out
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 4
-xy_offset = 0.075
+xy_offset = 0.025

--- a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_petcf_0.2mm_engineering.inst.cfg
+++ b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_petcf_0.2mm_engineering.inst.cfg
@ -13,11 +13,11 @@ type = intent
 variant = CC+ 0.4

 [values]
-hole_xy_offset = 0.075
+hole_xy_offset = 0.1
 infill_sparse_density = 20
 initial_bottom_layers = =bottom_layers
-inset_direction = outside_in
+inset_direction = inside_out
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 4
-xy_offset = 0.075
+xy_offset = 0.025

--- a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.6_nylon-cf-slide_0.2mm_engineering.inst.cfg
+++ b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.6_nylon-cf-slide_0.2mm_engineering.inst.cfg
@ -12,11 +12,11 @@ type = intent
 variant = CC+ 0.6

 [values]
-hole_xy_offset = 0.075
+hole_xy_offset = 0.1
 infill_sparse_density = 20
 initial_bottom_layers = =bottom_layers
-inset_direction = outside_in
+inset_direction = inside_out
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 4
-xy_offset = 0.075
+xy_offset = 0.025

--- a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.6_petcf_0.2mm_engineering.inst.cfg
+++ b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.6_petcf_0.2mm_engineering.inst.cfg
@ -12,11 +12,11 @@ type = intent
 variant = CC+ 0.6

 [values]
-hole_xy_offset = 0.075
+hole_xy_offset = 0.1
 infill_sparse_density = 20
 initial_bottom_layers = =bottom_layers
-inset_direction = outside_in
+inset_direction = inside_out
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 4
-xy_offset = 0.075
+xy_offset = 0.025

--- a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm.inst.cfg
@ -16,7 +16,6 @@ cool_min_layer_time = 4
 cool_min_layer_time_fan_speed_max = 9
 cool_min_temperature = =material_print_temperature - 20
 hole_xy_offset = 0.1
-inset_direction = inside_out
 retraction_prime_speed = 15
 speed_roofing = =speed_topbottom * 1/3
 speed_wall_x = =speed_wall
--- a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm.inst.cfg
@ -14,7 +14,6 @@ weight = -2
 [values]
 cool_min_layer_time = 4
 hole_xy_offset = 0.1
-inset_direction = inside_out
 material_print_temperature = =default_material_print_temperature + 5
 retraction_prime_speed = 15
 speed_roofing = =speed_topbottom * 1/3
--- a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.15mm.inst.cfg
@ -14,7 +14,6 @@ weight = -1
 [values]
 cool_min_temperature = =material_print_temperature - 20
 hole_xy_offset = 0.1
-inset_direction = inside_out
 material_final_print_temperature = =material_print_temperature - 15
 material_initial_print_temperature = =material_print_temperature - 15
 retraction_prime_speed = =retraction_speed
--- a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.1mm.inst.cfg
@ -14,7 +14,6 @@ weight = 0
 [values]
 cool_min_temperature = =material_print_temperature - 20
 hole_xy_offset = 0.1
-inset_direction = inside_out
 material_final_print_temperature = =material_print_temperature - 15
 material_initial_print_temperature = =material_print_temperature - 15
 retraction_prime_speed = =retraction_speed
--- a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm.inst.cfg
@ -14,7 +14,6 @@ weight = -2
 [values]
 cool_min_temperature = =material_print_temperature - 20
 hole_xy_offset = 0.1
-inset_direction = inside_out
 material_final_print_temperature = =material_print_temperature - 15
 material_initial_print_temperature = =material_print_temperature - 15
 retraction_prime_speed = =retraction_speed
--- a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.15mm.inst.cfg
@ -14,7 +14,6 @@ weight = -1
 [values]
 cool_min_temperature = =material_print_temperature - 20
 hole_xy_offset = 0.1
-inset_direction = inside_out
 retraction_prime_speed = =retraction_speed
 retraction_speed = 25
 speed_roofing = =speed_topbottom * 1/3
--- a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.1mm.inst.cfg
@ -14,7 +14,6 @@ weight = 0
 [values]
 cool_min_temperature = =material_print_temperature - 20
 hole_xy_offset = 0.1
-inset_direction = inside_out
 retraction_prime_speed = =retraction_speed
 speed_roofing = =speed_topbottom * 1/3
 speed_wall_x = =speed_wall
--- a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm.inst.cfg
@ -14,7 +14,6 @@ weight = -2
 [values]
 cool_min_temperature = =material_print_temperature - 20
 hole_xy_offset = 0.1
-inset_direction = inside_out
 retraction_prime_speed = =retraction_speed
 speed_roofing = =speed_topbottom * 1/3
 speed_wall_x = =speed_wall