diff --git a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm_engineering.inst.cfg
index fde2e098c1..1ae08483a8 100644
--- a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm_engineering.inst.cfg
+++ b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm_engineering.inst.cfg
@@ -12,11 +12,11 @@ type = intent
 variant = AA+ 0.4
 
 [values]
-hole_xy_offset = 0.075
+hole_xy_offset = 0.1
 infill_sparse_density = 20
 initial_bottom_layers = =bottom_layers
-inset_direction = outside_in
+inset_direction = inside_out
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 4
-xy_offset = 0.075
+xy_offset = 0.025
 
diff --git a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_cpe-plus_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_cpe-plus_0.2mm_engineering.inst.cfg
index 505458f677..1ce33df63e 100644
--- a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_cpe-plus_0.2mm_engineering.inst.cfg
+++ b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_cpe-plus_0.2mm_engineering.inst.cfg
@@ -12,11 +12,11 @@ type = intent
 variant = AA+ 0.4
 
 [values]
-hole_xy_offset = 0.075
+hole_xy_offset = 0.1
 infill_sparse_density = 20
 initial_bottom_layers = =bottom_layers
-inset_direction = outside_in
+inset_direction = inside_out
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 4
-xy_offset = 0.075
+xy_offset = 0.025
 
diff --git a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_cpe_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_cpe_0.2mm_engineering.inst.cfg
index f86e7d4ffb..830b383a14 100644
--- a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_cpe_0.2mm_engineering.inst.cfg
+++ b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_cpe_0.2mm_engineering.inst.cfg
@@ -12,11 +12,11 @@ type = intent
 variant = AA+ 0.4
 
 [values]
-hole_xy_offset = 0.075
+hole_xy_offset = 0.1
 infill_sparse_density = 20
 initial_bottom_layers = =bottom_layers
-inset_direction = outside_in
+inset_direction = inside_out
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 4
-xy_offset = 0.075
+xy_offset = 0.025
 
diff --git a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_pc_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_pc_0.2mm_engineering.inst.cfg
index a5d829d6d4..117609b5f9 100644
--- a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_pc_0.2mm_engineering.inst.cfg
+++ b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_pc_0.2mm_engineering.inst.cfg
@@ -12,11 +12,11 @@ type = intent
 variant = AA+ 0.4
 
 [values]
-hole_xy_offset = 0.075
+hole_xy_offset = 0.1
 infill_sparse_density = 20
 initial_bottom_layers = =bottom_layers
-inset_direction = outside_in
+inset_direction = inside_out
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 4
-xy_offset = 0.075
+xy_offset = 0.025
 
diff --git a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm_engineering.inst.cfg
index 2299d9e7b6..faca17a7f2 100644
--- a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm_engineering.inst.cfg
+++ b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm_engineering.inst.cfg
@@ -12,11 +12,11 @@ type = intent
 variant = AA+ 0.4
 
 [values]
-hole_xy_offset = 0.075
+hole_xy_offset = 0.1
 infill_sparse_density = 20
 initial_bottom_layers = =bottom_layers
-inset_direction = outside_in
+inset_direction = inside_out
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 4
-xy_offset = 0.075
+xy_offset = 0.025
 
diff --git a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm_engineering.inst.cfg
index 71235046b5..d2a93c9628 100644
--- a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm_engineering.inst.cfg
+++ b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm_engineering.inst.cfg
@@ -12,11 +12,11 @@ type = intent
 variant = AA+ 0.4
 
 [values]
-hole_xy_offset = 0.075
+hole_xy_offset = 0.1
 infill_sparse_density = 20
 initial_bottom_layers = =bottom_layers
-inset_direction = outside_in
+inset_direction = inside_out
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 4
-xy_offset = 0.075
+xy_offset = 0.025
 
diff --git a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm_engineering.inst.cfg
index 6499267f9f..94107c6c07 100644
--- a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm_engineering.inst.cfg
+++ b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm_engineering.inst.cfg
@@ -12,11 +12,11 @@ type = intent
 variant = AA+ 0.4
 
 [values]
-hole_xy_offset = 0.075
+hole_xy_offset = 0.1
 infill_sparse_density = 20
 initial_bottom_layers = =bottom_layers
-inset_direction = outside_in
+inset_direction = inside_out
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 4
-xy_offset = 0.075
+xy_offset = 0.025
 
diff --git a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_cpe-plus_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_cpe-plus_0.2mm_engineering.inst.cfg
index 8eee54c478..e5cc0e5980 100644
--- a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_cpe-plus_0.2mm_engineering.inst.cfg
+++ b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_cpe-plus_0.2mm_engineering.inst.cfg
@@ -13,11 +13,11 @@ type = intent
 variant = CC+ 0.4
 
 [values]
-hole_xy_offset = 0.075
+hole_xy_offset = 0.1
 infill_sparse_density = 20
 initial_bottom_layers = =bottom_layers
-inset_direction = outside_in
+inset_direction = inside_out
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 4
-xy_offset = 0.075
+xy_offset = 0.025
 
diff --git a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_nylon-cf-slide_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_nylon-cf-slide_0.2mm_engineering.inst.cfg
index 409b670a7b..7b507c7dd2 100644
--- a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_nylon-cf-slide_0.2mm_engineering.inst.cfg
+++ b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_nylon-cf-slide_0.2mm_engineering.inst.cfg
@@ -13,11 +13,11 @@ type = intent
 variant = CC+ 0.4
 
 [values]
-hole_xy_offset = 0.075
+hole_xy_offset = 0.1
 infill_sparse_density = 20
 initial_bottom_layers = =bottom_layers
-inset_direction = outside_in
+inset_direction = inside_out
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 4
-xy_offset = 0.075
+xy_offset = 0.025
 
diff --git a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_pc_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_pc_0.2mm_engineering.inst.cfg
index cf0de659e6..d5b8ea662e 100644
--- a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_pc_0.2mm_engineering.inst.cfg
+++ b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_pc_0.2mm_engineering.inst.cfg
@@ -13,11 +13,11 @@ type = intent
 variant = CC+ 0.4
 
 [values]
-hole_xy_offset = 0.075
+hole_xy_offset = 0.1
 infill_sparse_density = 20
 initial_bottom_layers = =bottom_layers
-inset_direction = outside_in
+inset_direction = inside_out
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 4
-xy_offset = 0.075
+xy_offset = 0.025
 
diff --git a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_petcf_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_petcf_0.2mm_engineering.inst.cfg
index 886ce200c6..7112e25a24 100644
--- a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_petcf_0.2mm_engineering.inst.cfg
+++ b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_petcf_0.2mm_engineering.inst.cfg
@@ -13,11 +13,11 @@ type = intent
 variant = CC+ 0.4
 
 [values]
-hole_xy_offset = 0.075
+hole_xy_offset = 0.1
 infill_sparse_density = 20
 initial_bottom_layers = =bottom_layers
-inset_direction = outside_in
+inset_direction = inside_out
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 4
-xy_offset = 0.075
+xy_offset = 0.025
 
diff --git a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.6_nylon-cf-slide_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.6_nylon-cf-slide_0.2mm_engineering.inst.cfg
index f8909a1d9a..b123d08d07 100644
--- a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.6_nylon-cf-slide_0.2mm_engineering.inst.cfg
+++ b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.6_nylon-cf-slide_0.2mm_engineering.inst.cfg
@@ -12,11 +12,11 @@ type = intent
 variant = CC+ 0.6
 
 [values]
-hole_xy_offset = 0.075
+hole_xy_offset = 0.1
 infill_sparse_density = 20
 initial_bottom_layers = =bottom_layers
-inset_direction = outside_in
+inset_direction = inside_out
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 4
-xy_offset = 0.075
+xy_offset = 0.025
 
diff --git a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.6_petcf_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.6_petcf_0.2mm_engineering.inst.cfg
index dcea5a265b..6b76067441 100644
--- a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.6_petcf_0.2mm_engineering.inst.cfg
+++ b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.6_petcf_0.2mm_engineering.inst.cfg
@@ -12,11 +12,11 @@ type = intent
 variant = CC+ 0.6
 
 [values]
-hole_xy_offset = 0.075
+hole_xy_offset = 0.1
 infill_sparse_density = 20
 initial_bottom_layers = =bottom_layers
-inset_direction = outside_in
+inset_direction = inside_out
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 4
-xy_offset = 0.075
+xy_offset = 0.025
 
diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm.inst.cfg
index dcb79ffbee..be7813a2dc 100644
--- a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm.inst.cfg
@@ -16,7 +16,6 @@ cool_min_layer_time = 4
 cool_min_layer_time_fan_speed_max = 9
 cool_min_temperature = =material_print_temperature - 20
 hole_xy_offset = 0.1
-inset_direction = inside_out
 retraction_prime_speed = 15
 speed_roofing = =speed_topbottom * 1/3
 speed_wall_x = =speed_wall
diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm.inst.cfg
index fd3942a782..acf6ed24e0 100644
--- a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm.inst.cfg
@@ -14,7 +14,6 @@ weight = -2
 [values]
 cool_min_layer_time = 4
 hole_xy_offset = 0.1
-inset_direction = inside_out
 material_print_temperature = =default_material_print_temperature + 5
 retraction_prime_speed = 15
 speed_roofing = =speed_topbottom * 1/3
diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.15mm.inst.cfg
index 3807598f26..68e7629157 100644
--- a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.15mm.inst.cfg
@@ -14,7 +14,6 @@ weight = -1
 [values]
 cool_min_temperature = =material_print_temperature - 20
 hole_xy_offset = 0.1
-inset_direction = inside_out
 material_final_print_temperature = =material_print_temperature - 15
 material_initial_print_temperature = =material_print_temperature - 15
 retraction_prime_speed = =retraction_speed
diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.1mm.inst.cfg
index c047ded9c3..fde3aae9b0 100644
--- a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.1mm.inst.cfg
@@ -14,7 +14,6 @@ weight = 0
 [values]
 cool_min_temperature = =material_print_temperature - 20
 hole_xy_offset = 0.1
-inset_direction = inside_out
 material_final_print_temperature = =material_print_temperature - 15
 material_initial_print_temperature = =material_print_temperature - 15
 retraction_prime_speed = =retraction_speed
diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm.inst.cfg
index 580f05d0b7..47b96dd98c 100644
--- a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm.inst.cfg
@@ -14,7 +14,6 @@ weight = -2
 [values]
 cool_min_temperature = =material_print_temperature - 20
 hole_xy_offset = 0.1
-inset_direction = inside_out
 material_final_print_temperature = =material_print_temperature - 15
 material_initial_print_temperature = =material_print_temperature - 15
 retraction_prime_speed = =retraction_speed
diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.15mm.inst.cfg
index 06d3c93cf3..4ac348f94b 100644
--- a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.15mm.inst.cfg
@@ -14,7 +14,6 @@ weight = -1
 [values]
 cool_min_temperature = =material_print_temperature - 20
 hole_xy_offset = 0.1
-inset_direction = inside_out
 retraction_prime_speed = =retraction_speed
 retraction_speed = 25
 speed_roofing = =speed_topbottom * 1/3
diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.1mm.inst.cfg
index 6099457369..b3d13edf4a 100644
--- a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.1mm.inst.cfg
@@ -14,7 +14,6 @@ weight = 0
 [values]
 cool_min_temperature = =material_print_temperature - 20
 hole_xy_offset = 0.1
-inset_direction = inside_out
 retraction_prime_speed = =retraction_speed
 speed_roofing = =speed_topbottom * 1/3
 speed_wall_x = =speed_wall
diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm.inst.cfg
index 373fa7b78e..346a658ad0 100644
--- a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm.inst.cfg
@@ -14,7 +14,6 @@ weight = -2
 [values]
 cool_min_temperature = =material_print_temperature - 20
 hole_xy_offset = 0.1
-inset_direction = inside_out
 retraction_prime_speed = =retraction_speed
 speed_roofing = =speed_topbottom * 1/3
 speed_wall_x = =speed_wall