mirror of
https://github.com/MarlinFirmware/Configurations.git
synced 2025-08-04 12:34:10 -06:00
72 lines
3.5 KiB
Markdown
72 lines
3.5 KiB
Markdown
# Updated Example Configuration for Velleman [K8200](http://www.k8200.eu/)
|
|
|
|
I have taken @CONSULiTAS' excellent configuration file, and added support for the
|
|
following:
|
|
|
|
* VM8204 Z Axis and coupler. This was just a stub previously
|
|
* Full Graphic LCD Controller with SD
|
|
|
|
In addition to the existing options
|
|
* VM8201 LCD Controller
|
|
|
|
I believe the configuration should work for all these options, but since I was
|
|
only able to test with the VM8204 and full graphic LCD, I have created a new
|
|
configuration. If you don't have an upgraded K8200 or 3drag, you may wish to
|
|
use the original version.
|
|
|
|
# Instructions
|
|
|
|
If you have a VM8204 upgraded Z axis and coupler, ensure the following line
|
|
is uncommented. Otherwise comment it out:
|
|
|
|
```cpp
|
|
#define K8200_K8204
|
|
```
|
|
If you have the VM8201 display unit, uncomment the following line
|
|
```cpp
|
|
//#define K8200_VM8201
|
|
```
|
|
|
|
If you have the *3D Printer Full Graphic Smart Controller with 3Drag adapter* (or other screen based on the [RepRap Discount Full Graphic Smart Controller](https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller)), ensure
|
|
the following is uncommented, otherwise comment it out
|
|
```cpp
|
|
#define FULLGRAPHIC_CONTROLLER_LCD_SD
|
|
```
|
|
|
|
## Notes
|
|
|
|
I (pau1ie) tested this configuration on my K8200 with VM8204 Z axis and
|
|
full graphic controller. I purchased a 3drag controller main board which is
|
|
identical to the Velleman supplied one, so I am confident this firmware
|
|
will also work with the 3drag as CONSULiTAS states below.
|
|
|
|
Only one LCD screen is supported (they plug into the same place), so only one of them should be uncommented.
|
|
Leaving both controllers uncommented is likely to result in firmware that doesn't work with either.
|
|
|
|
There is a configuration option for the K8203 Direct Drive Extruder, but
|
|
it does nothing at present.
|
|
|
|
In addition to the firmware sources below, see the following for for genuine [3drag Firmware](https://3dprint.elettronicain.it/blog/2012/09/06/software/)
|
|
|
|
|
|
# Original Readme
|
|
|
|
* Configuration files for **Vellemann K8200** (with [VM8201](http://www.vellemanprojects.eu/products/view/?id=416158) - LCD Option for K8200)
|
|
* K8200 is a 3Drag clone - configuration should work with 3Drag https://reprap.org/wiki/3drag, too. Please report.
|
|
|
|
* updated manually with parameters from genuine Vellemann Firmware "firmware_k8200_marlinv2" based on the recent development branch
|
|
|
|
* VM8201 uses "DISPLAY_CHARSET_HD44870 JAPANESE" and "ULTIMAKERCONTROLLER"
|
|
* german (de) translation with umlaut is supported now - thanks to @AnHardt for the great hardware based umlaut support
|
|
|
|
I [@CONSULitAS](https://github.com/CONSULitAS) tested the changes on my K8200 with 20x4-LCD and Arduino 1.6.12 for Mac (SD library added to IDE manually), 2016-11-18 - everything works well.
|
|
|
|
**Source for genuine [Vellemann Firmware](http://www.k8200.eu/support/downloads/)**
|
|
* V2.1.1 (for z axis upgrade, date branched: 2013-06-05): [firmware_k8200_v2.1.1.zip](http://www.k8200.eu/downloads/files/downloads/firmware_k8200_v2.1.1.zip)
|
|
* see also https://github.com/CONSULitAS/Marlin-K8200/tree/Vellemann_firmware_k8200_v2.1.1.zip
|
|
|
|
* V2 (with LCD/SD-Support, date branched: 2013-06-05): [firmware_k8200_marlinv2.zip](http://www.k8200.eu/downloads/files/downloads/firmware_k8200_marlinv2.zip)
|
|
* see also https://github.com/CONSULitAS/Marlin-K8200/tree/Vellemann_firmware_k8200_marlinv2.zip
|
|
|
|
* V1 (without LCD/SD-Support, date branched: 2012-10-02): [firmware_k8200_marlinv1.zip](http://www.k8200.eu/downloads/files/downloads/firmware_k8200_marlinv1.zip)
|
|
* see also https://github.com/CONSULitAS/Marlin-K8200/tree/Vellemann_firmware_k8200_marlinv1.zip
|