mirror of
https://github.com/MarlinFirmware/Configurations.git
synced 2025-07-18 04:08:05 -06:00
25 lines
1 KiB
Markdown
25 lines
1 KiB
Markdown
## Eryone Thinker V2
|
|
|
|
- BLTouch probe
|
|
- Filament runout Sensor
|
|
|
|
## How to use the config
|
|
|
|
#### Check the hardware of your printer
|
|
|
|
1. If you're using the stock printer there's need to modify the config.
|
|
2. If you're using the Filament Runout Sensor:
|
|
- Enable this line (Remove the "`//`" prefix)<br/>
|
|
`//#define THINKERV2_FL // Enable for an installed Filament runout sensor`
|
|
3. You are using the Bltouch:
|
|
- Enable this line (Remove the "`//`" prefix)<br/>
|
|
`//#define THINKERV2_BLTOUCH // Enable for an installed BLTOUCH`
|
|
4. You are using the direct drive extruder:
|
|
- Enable this line (Remove the "`//`" prefix)<br/>
|
|
`//#define THINKERV2_Direct // Enable for Direct drive extruder system`
|
|
5. Can I use all of the mods? The answer is yes. You can use all of them or just some of them.
|
|
6. If your printer's PSU has a reset problem you can disable the `PIDTEMPBED` feature:
|
|
- Disable this line (Prefix with "`//`")<br/>
|
|
`#define PIDTEMPBED // If your PSU has a reset problem then try to disable it to improve this problem`
|
|
|
|
## Have fun :)
|