mirror of
https://github.com/MarlinFirmware/Configurations.git
synced 2025-08-04 12:34:10 -06:00
27 lines
1.1 KiB
Markdown
27 lines
1.1 KiB
Markdown
## Product version
|
|
|
|
- TINA2 WIFI: TINA2 standard version with ESP32 WIFI module installed. Support remote control, send files via wifi, and online 3d model library.
|
|
- TINA2 BASIC: TINA2 lite version, without WIFI module and protective shell.
|
|
|
|
Please note the monorpice cadet printer is a rebranded version of these printers and the provided configuration should work.
|
|
|
|
## Hardware version
|
|
|
|
- V2: The motherboard version is 62AS. The endstop type is lever limit switch.
|
|
- V3: The motherboard version is 62AS. The endstop type is mushroom head limit switch.
|
|
|
|
## Adding wifi support using ESP3D
|
|
|
|
You can add wifi support using [ESP3D](https://github.com/luc-github/ESP3D).
|
|
Basically connect your own NodeMCU to second serial port of the MCU.
|
|
See ESP3D wiki for connection diagram.
|
|
|
|
In Marlin configuration.h set:
|
|
`#define SERIAL_PORT_2 3`
|
|
|
|
## Manufacturer wifi support
|
|
|
|
Examples provided here have not been tested with wifi board from manufacturer.
|
|
Setting `#define SERIAL_PORT_2 3` in Marlin configuration.h might be enough to work with manufacturer wifi board.
|
|
|
|
Feedback are welcome.
|