3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2026-01-30 12:50:45 -07:00
Code Issues Projects Releases Packages Wiki Activity Actions

🎨 Fix echoes
Some checks failed
Deploy / deploy (push) Has been cancelled
Details

Browse source
This commit is contained in:
Scott Lahteine 2025-10-07 00:43:36 -05:00
parent fa9f10a2fb
commit ec08426dad
800 changed files with 2000 additions and 2000 deletions
Download patch file Download diff file Expand all files Collapse all files

2
config/default/Configuration.h
View file

@ -951,7 +951,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/default/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4285,7 +4285,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/3DFabXYZ/Migbot/Configuration.h
View file

@ -953,7 +953,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4302,7 +4302,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/3DMatik/XL/Configuration.h
View file

@ -951,7 +951,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/3DMatik/XL/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/ADIMLab/Gantry v1/Configuration.h
View file

@ -951,7 +951,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/ADIMLab/Gantry v1/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/ADIMLab/Gantry v2/Configuration.h
View file

@ -951,7 +951,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/ADIMLab/Gantry v2/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/Alfawise/U20-bltouch/Configuration.h
View file

@ -1020,7 +1020,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/Alfawise/U20-bltouch/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1183,7 +1183,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4316,7 +4316,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/Alfawise/U20/Configuration.h
View file

@ -1021,7 +1021,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/Alfawise/U20/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4307,7 +4307,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/AliExpress/CL-260/Configuration.h
View file

@ -951,7 +951,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/AliExpress/CL-260/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/AliExpress/UM2pExt/Configuration.h
View file

@ -952,7 +952,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/AliExpress/UM2pExt/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4308,7 +4308,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/Anet/A2/Configuration.h
View file

@ -951,7 +951,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/Anet/A2/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/Anet/A2plus/Configuration.h
View file

@ -951,7 +951,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/Anet/A2plus/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/Anet/A6/Configuration.h
View file

@ -952,7 +952,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/Anet/A6/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/Anet/A8/Configuration.h
View file

@ -954,7 +954,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/Anet/A8/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/Anet/A8plus/Configuration.h
View file

@ -953,7 +953,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/Anet/A8plus/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/Anet/A9/Configuration.h
View file

@ -951,7 +951,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/Anet/A9/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/Anet/E10/Configuration.h
View file

@ -951,7 +951,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/Anet/E10/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/Anet/E16/BTT SKR 1.3/Configuration.h
View file

@ -953,7 +953,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/Anet/E16/Stock/Configuration.h
View file

@ -953,7 +953,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/Anet/E16/Stock/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/Anet/ET4+/Configuration.h
View file

@ -957,7 +957,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/Anet/ET4+/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/Anet/ET4-Pro/Configuration.h
View file

@ -957,7 +957,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/Anet/ET4-Pro/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/Anet/ET4/Configuration.h
View file

@ -957,7 +957,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/Anet/ET4/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/Anet/ET4X/Configuration.h
View file

@ -957,7 +957,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/Anet/ET4X/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/Anet/ET5-Pro/Configuration.h
View file

@ -951,7 +951,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/Anet/ET5-Pro/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4303,7 +4303,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/Anet/ET5/Configuration.h
View file

@ -951,7 +951,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/Anet/ET5/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4303,7 +4303,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/Anet/ET5X/Configuration.h
View file

@ -951,7 +951,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/Anet/ET5X/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4303,7 +4303,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/AnyCubic/Chiron/Configuration.h
View file

@ -955,7 +955,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/AnyCubic/Chiron/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h
View file

@ -952,7 +952,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h
View file

@ -952,7 +952,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h
View file

@ -951,7 +951,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/AnyCubic/Vyper/Configuration.h
View file

@ -951,7 +951,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/AnyCubic/Vyper/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h
View file

@ -990,7 +990,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h
View file

@ -958,7 +958,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/AnyCubic/i3/Configuration.h
View file

@ -951,7 +951,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/AnyCubic/i3/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/ArmEd/Configuration.h
View file

@ -952,7 +952,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/ArmEd/Configuration_adv.h
View file

@ -302,7 +302,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -783,7 +783,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1179,7 +1179,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4311,7 +4311,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/Artillery/Genius Pro/Configuration.h
View file

@ -951,7 +951,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/Artillery/Genius Pro/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/Artillery/Genius/BLTouch/Configuration.h
View file

@ -951,7 +951,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/Artillery/Genius/BLTouch/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/Artillery/Genius/V1/Configuration.h
View file

@ -951,7 +951,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/Artillery/Genius/V1/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/Artillery/Hornet/Configuration.h
View file

@ -951,7 +951,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/Artillery/Hornet/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h
View file

@ -966,7 +966,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/Artillery/Sidewinder X1/V1/Configuration.h
View file

@ -951,7 +951,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/Artillery/Sidewinder X2/Configuration.h
View file

@ -951,7 +951,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/Artillery/Sidewinder X2/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/Azteeg/X5GT/Configuration.h
View file

@ -951,7 +951,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/Azteeg/X5GT/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/BIBO/TouchX/cyclops/Configuration.h
View file

@ -951,7 +951,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/BIBO/TouchX/default - BLTouch/Configuration.h
View file

@ -951,7 +951,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/BIBO/TouchX/default - BLTouch/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4306,7 +4306,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/BIBO/TouchX/default/Configuration.h
View file

@ -951,7 +951,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/BIBO/TouchX/default/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4303,7 +4303,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/BIQU/B1 SE Plus/Configuration.h
View file

@ -949,7 +949,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/BIQU/B1 SE Plus/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4307,7 +4307,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/BIQU/B1 SE/Configuration.h
View file

@ -949,7 +949,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/BIQU/B1 SE/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4307,7 +4307,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/BIQU/B1/Configuration.h
View file

@ -958,7 +958,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/BIQU/B1/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1174,7 +1174,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4309,7 +4309,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/BIQU/BX/Configuration.h
View file

@ -971,7 +971,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/BIQU/BX/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1175,7 +1175,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4308,7 +4308,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

2
config/examples/BIQU/Hurakan/Configuration.h
View file

@ -954,7 +954,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* If you get "Thermal Runaway" or "Heating failed" errors the

8
config/examples/BIQU/Hurakan/Configuration_adv.h
View file

@ -297,7 +297,7 @@
* protect against a broken or disconnected thermistor wire.
*
* The issue: If a thermistor falls out, it will report the much lower
* temperature of the air in the room, and the the firmware will keep
* temperature of the air in the room, and the firmware will keep
* the heater on.
*
* The solution: Once the temperature reaches the target, start observing.
@ -778,7 +778,7 @@
// @section endstops
// If you want endstops to stay on (by default) even when not homing
// If you want endstops to stay on (by default) even when not homing,
// enable this option. Override at any time with M120, M121.
//#define ENDSTOPS_ALWAYS_ON_DEFAULT
@ -1175,7 +1175,7 @@
#define FTM_SHAPING_V_TOL_Z 0.05f // Vibration tolerance used by EI input shapers for Z axis
//#define FTM_SHAPER_E // Include E shaping support
// Required to synchronise extruder with XYZ (better quality)
// Required to synchronize extruder with XYZ (better quality)
#define FTM_DEFAULT_SHAPER_E ftMotionShaper_NONE // Default shaper mode on Extruder axis
#define FTM_SHAPING_DEFAULT_FREQ_E 21.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
@ -4307,7 +4307,7 @@
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of

Some files were not shown because too many files have changed in this diff Show more