mirror of
https://github.com/MarlinFirmware/Configurations.git
synced 2025-07-07 06:57:39 -06:00
Scott Lahteine
parent
999701bef9
commit
c734d0add8
467 changed files with 10448 additions and 0 deletions
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -636,6 +639,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,15 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1538,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -330,8 +330,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -419,6 +421,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -638,6 +641,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -636,6 +639,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -636,6 +639,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 7
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -647,6 +650,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -367,8 +367,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -456,6 +458,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -692,6 +695,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
//#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1505,6 +1547,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -367,8 +367,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -456,6 +458,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -693,6 +696,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
//#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -636,6 +639,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 20
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -637,6 +640,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 5
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -636,6 +639,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 5
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -636,6 +639,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 11
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -637,6 +640,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -330,8 +330,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -419,6 +421,7 @@
|
|||
#define TEMP_SENSOR_BED 5
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -639,6 +642,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -330,8 +330,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -419,6 +421,7 @@
|
|||
#define TEMP_SENSOR_BED 5
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -638,6 +641,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 5
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -636,6 +639,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 5
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -636,6 +639,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -638,6 +641,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 5
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -638,6 +641,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -642,6 +645,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -642,6 +645,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -642,6 +645,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -642,6 +645,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -636,6 +639,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -636,6 +639,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -636,6 +639,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -333,8 +333,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -422,6 +424,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -640,6 +643,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
//#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 80
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -330,8 +330,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -419,6 +421,7 @@
|
|||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -638,6 +641,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -636,6 +639,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -334,8 +334,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -423,6 +425,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -641,6 +644,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -636,6 +639,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 13
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -637,6 +640,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -117,6 +117,12 @@
|
|||
#define HEATER_0_INVERTING true
|
||||
#define HEATER_1_INVERTING true
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -183,6 +189,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -252,6 +277,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -497,11 +536,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1499,6 +1541,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -636,6 +639,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -636,6 +639,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -651,6 +654,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -636,6 +639,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 5
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -636,6 +639,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 60
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -592,6 +595,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -172,6 +178,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -241,6 +266,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -486,11 +525,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1488,6 +1530,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -636,6 +639,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -636,6 +639,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -637,6 +640,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -337,8 +337,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -426,6 +428,7 @@
|
|||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -650,6 +653,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1503,6 +1545,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -637,6 +640,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -637,6 +640,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -330,8 +330,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -419,6 +421,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -652,6 +655,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 35
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -637,6 +640,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -636,6 +639,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -637,6 +640,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -338,8 +338,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -427,6 +429,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -645,6 +648,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -636,6 +639,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
//#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
#define STATUS_FAN_FRAMES 4
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -636,6 +639,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -636,6 +639,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -336,8 +336,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -425,6 +427,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -645,6 +648,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,14 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1537,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -635,6 +638,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
Some files were not shown because too many files have changed in this diff Show more
Loading…
Add table
Add a link
Reference in a new issue