From c734d0add831da462f79a5e7145bae69be1b9dee Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sat, 6 Mar 2021 11:04:11 -0600 Subject: [PATCH] Laser Cooling MarlinFirmware/Marlin#21255 --- config/default/Configuration.h | 4 ++ config/default/Configuration_adv.h | 44 +++++++++++++++++++ .../examples/3DFabXYZ/Migbot/Configuration.h | 4 ++ .../3DFabXYZ/Migbot/Configuration_adv.h | 43 ++++++++++++++++++ .../ADIMLab/Gantry v1/Configuration.h | 4 ++ .../ADIMLab/Gantry v1/Configuration_adv.h | 43 ++++++++++++++++++ .../ADIMLab/Gantry v2/Configuration.h | 4 ++ .../ADIMLab/Gantry v2/Configuration_adv.h | 43 ++++++++++++++++++ .../AlephObjects/TAZ4/Configuration.h | 4 ++ .../AlephObjects/TAZ4/Configuration_adv.h | 43 ++++++++++++++++++ .../Alfawise/U20-bltouch/Configuration.h | 4 ++ .../Alfawise/U20-bltouch/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Alfawise/U20/Configuration.h | 4 ++ .../examples/Alfawise/U20/Configuration_adv.h | 43 ++++++++++++++++++ .../AliExpress/CL-260/Configuration.h | 4 ++ .../AliExpress/UM2pExt/Configuration.h | 4 ++ .../AliExpress/UM2pExt/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Anet/A2/Configuration.h | 4 ++ config/examples/Anet/A2/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Anet/A2plus/Configuration.h | 4 ++ .../examples/Anet/A2plus/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Anet/A6/Configuration.h | 4 ++ config/examples/Anet/A6/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Anet/A8/Configuration.h | 4 ++ config/examples/Anet/A8/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Anet/A8plus/Configuration.h | 4 ++ .../examples/Anet/A8plus/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Anet/A9/Configuration.h | 4 ++ config/examples/Anet/A9/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Anet/E10/Configuration.h | 4 ++ config/examples/Anet/E10/Configuration_adv.h | 43 ++++++++++++++++++ .../Anet/E16/BTT SKR 1.3/Configuration.h | 4 ++ .../Anet/E16/BTT SKR 1.3/Configuration_adv.h | 43 ++++++++++++++++++ .../examples/Anet/E16/Stock/Configuration.h | 4 ++ .../Anet/E16/Stock/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Anet/ET4+/Configuration.h | 4 ++ config/examples/Anet/ET4+/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Anet/ET4-Pro/Configuration.h | 4 ++ .../examples/Anet/ET4-Pro/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Anet/ET4/Configuration.h | 4 ++ config/examples/Anet/ET4/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Anet/ET4X/Configuration.h | 4 ++ config/examples/Anet/ET4X/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Anet/ET5-Pro/Configuration.h | 4 ++ .../examples/Anet/ET5-Pro/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Anet/ET5/Configuration.h | 4 ++ config/examples/Anet/ET5/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Anet/ET5X/Configuration.h | 4 ++ config/examples/Anet/ET5X/Configuration_adv.h | 43 ++++++++++++++++++ .../examples/AnyCubic/Chiron/Configuration.h | 4 ++ .../AnyCubic/Chiron/Configuration_adv.h | 43 ++++++++++++++++++ .../Mega Zero/Anycubic V1/Configuration.h | 4 ++ .../Mega Zero/Anycubic V1/Configuration_adv.h | 43 ++++++++++++++++++ .../Configuration.h | 4 ++ .../Configuration_adv.h | 43 ++++++++++++++++++ .../examples/AnyCubic/i3 Mega/Configuration.h | 4 ++ .../AnyCubic/i3 Mega/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/AnyCubic/i3/Configuration.h | 4 ++ .../examples/AnyCubic/i3/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/ArmEd/Configuration.h | 4 ++ config/examples/ArmEd/Configuration_adv.h | 43 ++++++++++++++++++ .../examples/Artillery/Genius/Configuration.h | 4 ++ .../Artillery/Genius/Configuration_adv.h | 43 ++++++++++++++++++ .../Artillery/Sidewinder X1/Configuration.h | 4 ++ .../Sidewinder X1/Configuration_adv.h | 43 ++++++++++++++++++ .../Configuration.h | 4 ++ .../Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Azteeg/X5GT/Configuration.h | 4 ++ .../examples/Azteeg/X5GT/Configuration_adv.h | 43 ++++++++++++++++++ .../BIBO/TouchX/cyclops/Configuration.h | 4 ++ .../BIBO/TouchX/cyclops/Configuration_adv.h | 43 ++++++++++++++++++ .../BIBO/TouchX/default/Configuration.h | 4 ++ .../BIBO/TouchX/default/Configuration_adv.h | 43 ++++++++++++++++++ .../examples/BIQU/B1-BLTouch/Configuration.h | 4 ++ .../BIQU/B1-BLTouch/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/BIQU/B1/Configuration.h | 4 ++ config/examples/BIQU/B1/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/BQ/Hephestos/Configuration.h | 4 ++ .../examples/BQ/Hephestos/Configuration_adv.h | 43 ++++++++++++++++++ .../examples/BQ/Hephestos_2/Configuration.h | 4 ++ .../BQ/Hephestos_2/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/BQ/WITBOX/Configuration.h | 4 ++ config/examples/BQ/WITBOX/Configuration_adv.h | 43 ++++++++++++++++++ .../i3 2560 Rev A/no probe/Configuration.h | 4 ++ config/examples/Cartesio/Configuration.h | 4 ++ config/examples/Cartesio/Configuration_adv.h | 43 ++++++++++++++++++ .../examples/Copymaster3D/300/Configuration.h | 4 ++ .../examples/Copymaster3D/400/Configuration.h | 4 ++ .../examples/Copymaster3D/500/Configuration.h | 4 ++ .../CR-10 Mini/CrealityV1/Configuration.h | 4 ++ .../CR-10 Mini/CrealityV1/Configuration_adv.h | 43 ++++++++++++++++++ .../CR-10 Mini/MEEB-3DP/Configuration.h | 4 ++ .../CR-10 Mini/MEEB-3DP/Configuration_adv.h | 43 ++++++++++++++++++ .../CR-10 S4/CrealityV1/Configuration.h | 4 ++ .../CR-10 S4/CrealityV1/Configuration_adv.h | 43 ++++++++++++++++++ .../CR-10 S5/CrealityV1/Configuration.h | 4 ++ .../CR-10 S5/CrealityV1/Configuration_adv.h | 43 ++++++++++++++++++ .../Creality/CR-10 V2/Configuration.h | 4 ++ .../Creality/CR-10 V2/Configuration_adv.h | 43 ++++++++++++++++++ .../Configuration.h | 4 ++ .../Configuration_adv.h | 43 ++++++++++++++++++ .../Creality/CR-10/CrealityV1/Configuration.h | 4 ++ .../CR-10/CrealityV1/Configuration_adv.h | 43 ++++++++++++++++++ .../Configuration.h | 4 ++ .../Configuration_adv.h | 43 ++++++++++++++++++ .../Configuration.h | 4 ++ .../Configuration_adv.h | 43 ++++++++++++++++++ .../CR-10S/CrealityV1/Configuration.h | 4 ++ .../CR-10S/CrealityV1/Configuration_adv.h | 43 ++++++++++++++++++ .../Creality/CR-20 Pro/Configuration.h | 4 ++ .../Creality/CR-20 Pro/Configuration_adv.h | 43 ++++++++++++++++++ .../examples/Creality/CR-20/Configuration.h | 4 ++ .../Creality/CR-20/Configuration_adv.h | 43 ++++++++++++++++++ .../examples/Creality/CR-6 SE/Configuration.h | 4 ++ .../Creality/CR-6 SE/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Creality/CR-8/Configuration.h | 4 ++ .../Creality/CR-8/Configuration_adv.h | 43 ++++++++++++++++++ .../examples/Creality/Ender-2/Configuration.h | 4 ++ .../Creality/Ender-2/Configuration_adv.h | 43 ++++++++++++++++++ .../Configuration.h | 4 ++ .../Configuration_adv.h | 43 ++++++++++++++++++ .../Configuration.h | 4 ++ .../Configuration_adv.h | 43 ++++++++++++++++++ .../Configuration.h | 4 ++ .../Configuration_adv.h | 43 ++++++++++++++++++ .../Ender-3 Pro/CrealityV1/Configuration.h | 4 ++ .../CrealityV1/Configuration_adv.h | 43 ++++++++++++++++++ .../Ender-3 Pro/CrealityV422/Configuration.h | 4 ++ .../CrealityV422/Configuration_adv.h | 43 ++++++++++++++++++ .../Ender-3 Pro/CrealityV427/Configuration.h | 4 ++ .../CrealityV427/Configuration_adv.h | 43 ++++++++++++++++++ .../Creality/Ender-3 V2/Configuration.h | 4 ++ .../Creality/Ender-3 V2/Configuration_adv.h | 43 ++++++++++++++++++ .../2-into-1 Hotend/Configuration.h | 4 ++ .../2-into-1 Hotend/Configuration_adv.h | 43 ++++++++++++++++++ .../Dual Z/Configuration.h | 4 ++ .../Dual Z/Configuration_adv.h | 43 ++++++++++++++++++ .../Single Extruder/Configuration.h | 4 ++ .../Single Extruder/Configuration_adv.h | 43 ++++++++++++++++++ .../Configuration.h | 4 ++ .../Configuration_adv.h | 43 ++++++++++++++++++ .../Configuration.h | 4 ++ .../Configuration_adv.h | 43 ++++++++++++++++++ .../Configuration.h | 4 ++ .../Configuration_adv.h | 43 ++++++++++++++++++ .../Configuration.h | 4 ++ .../Configuration_adv.h | 43 ++++++++++++++++++ .../Ender-3/CrealityV1/Configuration.h | 4 ++ .../Ender-3/CrealityV1/Configuration_adv.h | 43 ++++++++++++++++++ .../Ender-3/CrealityV422/Configuration.h | 4 ++ .../Ender-3/CrealityV422/Configuration_adv.h | 43 ++++++++++++++++++ .../Ender-3/CrealityV427/Configuration.h | 4 ++ .../Ender-3/CrealityV427/Configuration_adv.h | 43 ++++++++++++++++++ .../BLTouch/Configuration.h | 4 ++ .../BLTouch/Configuration_adv.h | 43 ++++++++++++++++++ .../FYSETC Cheetah 1.2/base/Configuration.h | 4 ++ .../base/Configuration_adv.h | 43 ++++++++++++++++++ .../FYSETC Cheetah/BLTouch/Configuration.h | 4 ++ .../BLTouch/Configuration_adv.h | 43 ++++++++++++++++++ .../FYSETC Cheetah/base/Configuration.h | 4 ++ .../FYSETC Cheetah/base/Configuration_adv.h | 43 ++++++++++++++++++ .../Creality/Ender-3/MEEB-3DP/Configuration.h | 4 ++ .../Ender-3/MEEB-3DP/Configuration_adv.h | 43 ++++++++++++++++++ .../Ender-3/MKS Robin E3 1.0/Configuration.h | 4 ++ .../MKS Robin E3 1.0/Configuration_adv.h | 43 ++++++++++++++++++ .../Ender-3/MKS Robin E3P/Configuration.h | 4 ++ .../Ender-3/MKS Robin E3P/Configuration_adv.h | 43 ++++++++++++++++++ .../examples/Creality/Ender-4/Configuration.h | 4 ++ .../Creality/Ender-4/Configuration_adv.h | 43 ++++++++++++++++++ .../Creality/Ender-5 Plus/Configuration.h | 4 ++ .../Creality/Ender-5 Plus/Configuration_adv.h | 43 ++++++++++++++++++ .../Configuration.h | 4 ++ .../Configuration_adv.h | 43 ++++++++++++++++++ .../BigTreeTech SKR E3 Turbo/Configuration.h | 4 ++ .../Configuration_adv.h | 43 ++++++++++++++++++ .../Configuration.h | 4 ++ .../Configuration_adv.h | 43 ++++++++++++++++++ .../Ender-5 Pro/CrealityV1/Configuration.h | 4 ++ .../CrealityV1/Configuration_adv.h | 43 ++++++++++++++++++ .../Ender-5 Pro/CrealityV422/Configuration.h | 4 ++ .../CrealityV422/Configuration_adv.h | 43 ++++++++++++++++++ .../Ender-5 Pro/CrealityV427/Configuration.h | 4 ++ .../CrealityV427/Configuration_adv.h | 43 ++++++++++++++++++ .../Configuration.h | 4 ++ .../Configuration_adv.h | 43 ++++++++++++++++++ .../Configuration.h | 4 ++ .../Configuration_adv.h | 43 ++++++++++++++++++ .../BigTreeTech SKR E3 Turbo/Configuration.h | 4 ++ .../Configuration_adv.h | 43 ++++++++++++++++++ .../Configuration.h | 4 ++ .../Configuration_adv.h | 43 ++++++++++++++++++ .../Configuration.h | 4 ++ .../Configuration_adv.h | 43 ++++++++++++++++++ .../Ender-5/CrealityV1/Configuration.h | 4 ++ .../Ender-5/CrealityV1/Configuration_adv.h | 43 ++++++++++++++++++ .../Ender-5/CrealityV427/Configuration.h | 4 ++ .../Ender-5/CrealityV427/Configuration_adv.h | 43 ++++++++++++++++++ .../examples/Creality/Ender-6/Configuration.h | 4 ++ .../Creality/Ender-6/Configuration_adv.h | 43 ++++++++++++++++++ .../Dagoma/Disco Ultimate/Configuration.h | 4 ++ .../Dagoma/Disco Ultimate/Configuration_adv.h | 43 ++++++++++++++++++ .../examples/Daycom/3DP-100/Configuration.h | 4 ++ .../Daycom/3DP-100/Configuration_adv.h | 43 ++++++++++++++++++ .../Imprimante multifonction/Configuration.h | 4 ++ .../Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Einstart-S/Configuration.h | 4 ++ .../examples/Einstart-S/Configuration_adv.h | 43 ++++++++++++++++++ .../Thinker V2 board/stock/Configuration.h | 4 ++ .../stock/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/FYSETC/AIO_II/Configuration.h | 4 ++ .../FYSETC/AIO_II/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/FYSETC/F6_13/Configuration.h | 4 ++ .../examples/FYSETC/F6_13/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/FYSETC/S6/Configuration.h | 4 ++ config/examples/FYSETC/S6/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Felix/DUAL/Configuration.h | 4 ++ .../examples/Felix/DUAL/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Felix/Single/Configuration.h | 4 ++ .../examples/Felix/Single/Configuration_adv.h | 43 ++++++++++++++++++ .../FlashForge/Creator 2X/Configuration.h | 4 ++ .../FlashForge/Creator 2X/Configuration_adv.h | 43 ++++++++++++++++++ .../FlashForge/CreatorPro/Configuration.h | 4 ++ .../FlashForge/CreatorPro/Configuration_adv.h | 43 ++++++++++++++++++ .../examples/FlyingBear/P905H/Configuration.h | 4 ++ .../FlyingBear/P905H/Configuration_adv.h | 43 ++++++++++++++++++ .../FolgerTech/i3-2020/Configuration.h | 4 ++ .../FolgerTech/i3-2020/Configuration_adv.h | 43 ++++++++++++++++++ .../examples/Formbot/Raptor/Configuration.h | 4 ++ .../Formbot/Raptor/Configuration_adv.h | 43 ++++++++++++++++++ .../examples/Formbot/T_Rex_2+/Configuration.h | 4 ++ .../Formbot/T_Rex_2+/Configuration_adv.h | 43 ++++++++++++++++++ .../examples/Formbot/T_Rex_3/Configuration.h | 4 ++ .../Formbot/T_Rex_3/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Geeetech/A10/Configuration.h | 4 ++ .../examples/Geeetech/A10/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Geeetech/A10D/Configuration.h | 4 ++ .../Geeetech/A10D/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Geeetech/A10M/Configuration.h | 4 ++ .../Geeetech/A10M/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Geeetech/A10T/Configuration.h | 4 ++ .../Geeetech/A10T/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Geeetech/A20/Configuration.h | 4 ++ .../examples/Geeetech/A20/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Geeetech/A20M/Configuration.h | 4 ++ .../Geeetech/A20M/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Geeetech/A20T/Configuration.h | 4 ++ .../Geeetech/A20T/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Geeetech/A30/Configuration.h | 4 ++ .../examples/Geeetech/A30/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Geeetech/D200/Configuration.h | 4 ++ .../Geeetech/D200/Configuration_adv.h | 43 ++++++++++++++++++ .../Geeetech/Duplicator5/Configuration.h | 4 ++ .../Geeetech/Duplicator5/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Geeetech/E180/Configuration.h | 4 ++ .../Geeetech/E180/Configuration_adv.h | 43 ++++++++++++++++++ .../examples/Geeetech/GT2560/Configuration.h | 4 ++ .../Geeetech/I3_Pro_X-GT2560/Configuration.h | 4 ++ config/examples/Geeetech/M201/Configuration.h | 4 ++ .../Geeetech/M201/Configuration_adv.h | 43 ++++++++++++++++++ .../Geeetech/MeCreator2/Configuration.h | 4 ++ .../Geeetech/MeCreator2/Configuration_adv.h | 43 ++++++++++++++++++ .../Geeetech/Me_creator/Configuration.h | 4 ++ .../Geeetech/Me_creator/Configuration_adv.h | 43 ++++++++++++++++++ .../Geeetech/Me_ducer/Configuration.h | 4 ++ .../Geeetech/Me_ducer/Configuration_adv.h | 43 ++++++++++++++++++ .../Geeetech/PI3A PRO/Configuration.h | 4 ++ .../Geeetech/PI3A PRO/Configuration_adv.h | 43 ++++++++++++++++++ .../Prusa i3 Pro B/bltouch/Configuration.h | 4 ++ .../Prusa i3 Pro B/noprobe/Configuration.h | 4 ++ .../Geeetech/Prusa i3 Pro C/Configuration.h | 4 ++ .../Prusa i3 Pro C/Configuration_adv.h | 43 ++++++++++++++++++ .../Geeetech/Prusa i3 Pro W/Configuration.h | 4 ++ .../Prusa i3 Pro W/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/HMS434/Configuration.h | 4 ++ config/examples/HMS434/Configuration_adv.h | 43 ++++++++++++++++++ .../examples/Infitary/i3-M508/Configuration.h | 4 ++ .../Infitary/i3-M508/Configuration_adv.h | 43 ++++++++++++++++++ .../Intamsys/FunmatHT 4988/Configuration.h | 4 ++ .../FunmatHT 4988/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/JGAurora/A1/Configuration.h | 4 ++ .../examples/JGAurora/A1/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/JGAurora/A3/Configuration.h | 4 ++ config/examples/JGAurora/A5/Configuration.h | 4 ++ .../examples/JGAurora/A5/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/JGAurora/A5S/Configuration.h | 4 ++ .../examples/JGAurora/A5S/Configuration_adv.h | 43 ++++++++++++++++++ .../examples/JGAurora/Magic/Configuration.h | 4 ++ .../JGAurora/Magic/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Kingroon/KP3/Configuration.h | 4 ++ .../examples/Kingroon/KP3/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Labists/ET4/Configuration.h | 4 ++ .../examples/Labists/ET4/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/MBot/Cube/Configuration.h | 4 ++ config/examples/MBot/Cube/Configuration_adv.h | 43 ++++++++++++++++++ .../MakerFarm/Pegasus 12/Configuration.h | 4 ++ .../MakerFarm/Pegasus 12/Configuration_adv.h | 42 ++++++++++++++++++ config/examples/MakerParts/Configuration.h | 4 ++ .../examples/MakerParts/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Malyan/M150/Configuration.h | 4 ++ .../examples/Malyan/M150/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Malyan/M200/Configuration.h | 4 ++ .../examples/Malyan/M200/Configuration_adv.h | 43 ++++++++++++++++++ .../Micromake/C1/basic/Configuration.h | 4 ++ .../Micromake/C1/enhanced/Configuration.h | 4 ++ .../Micromake/C1/enhanced/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Mks/Robin/Configuration.h | 4 ++ config/examples/Mks/Robin/Configuration_adv.h | 43 ++++++++++++++++++ .../examples/Mks/Robin_Lite3/Configuration.h | 4 ++ config/examples/Mks/Robin_Pro/Configuration.h | 4 ++ config/examples/Mks/Sbase/Configuration.h | 4 ++ config/examples/Mks/Sbase/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Modix/Big60/Configuration.h | 4 ++ .../examples/Modix/Big60/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Ortur 4/Configuration.h | 4 ++ config/examples/Ortur 4/Configuration_adv.h | 43 ++++++++++++++++++ .../Printrbot/PrintrboardG2/Configuration.h | 4 ++ .../Simple Metal RevD/Configuration.h | 4 ++ .../MK3S-BigTreeTech-BTT002/Configuration.h | 4 ++ .../Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Qidi/Qidi 1/Configuration.h | 4 ++ .../examples/Qidi/Qidi 1/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Raiscube/A8r/Configuration.h | 4 ++ .../examples/Raiscube/A8r/Configuration_adv.h | 43 ++++++++++++++++++ .../examples/RapideLite/RL200/Configuration.h | 4 ++ .../RapideLite/RL200/Configuration_adv.h | 43 ++++++++++++++++++ .../examples/Renkforce/RF100/Configuration.h | 4 ++ .../Renkforce/RF100/Configuration_adv.h | 43 ++++++++++++++++++ .../Renkforce/RF100XL/Configuration.h | 4 ++ .../Renkforce/RF100XL/Configuration_adv.h | 43 ++++++++++++++++++ .../Renkforce/RF100v2/Configuration.h | 4 ++ .../Renkforce/RF100v2/Configuration_adv.h | 43 ++++++++++++++++++ .../examples/RepRapPro/Huxley/Configuration.h | 4 ++ .../RepRapWorld/Megatronics/Configuration.h | 4 ++ config/examples/RigidBot/Configuration.h | 4 ++ config/examples/RigidBot/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Robo3D/R1+/Configuration.h | 4 ++ .../examples/SCARA/MP_SCARA/Configuration.h | 4 ++ .../SCARA/MP_SCARA/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/SCARA/Morgan/Configuration.h | 4 ++ .../examples/SCARA/Morgan/Configuration_adv.h | 43 ++++++++++++++++++ .../STM32/Black_STM32F407VET6/Configuration.h | 4 ++ .../Black_STM32F407VET6/Configuration_adv.h | 43 ++++++++++++++++++ .../STM32/STM32F103RE/Configuration.h | 4 ++ config/examples/STM32/STM32F4/Configuration.h | 4 ++ config/examples/Sanguinololu/Configuration.h | 4 ++ .../examples/Sanguinololu/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Sovol/SV-01/Configuration.h | 4 ++ .../examples/Sovol/SV-01/Configuration_adv.h | 43 ++++++++++++++++++ .../examples/TPARA/AXEL_TPARA/Configuration.h | 4 ++ .../TPARA/AXEL_TPARA/Configuration_adv.h | 43 ++++++++++++++++++ .../Tevo/Michelangelo/Configuration.h | 4 ++ .../Tevo/Michelangelo/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Tevo/Nereus/Configuration.h | 4 ++ .../examples/Tevo/Nereus/Configuration_adv.h | 43 ++++++++++++++++++ .../Tevo/Tarantula Pro/Configuration.h | 4 ++ .../Tevo/Tarantula Pro/Configuration_adv.h | 43 ++++++++++++++++++ .../Tornado/V1 (MKS Base)/Configuration.h | 4 ++ .../Tornado/V1 (MKS Base)/Configuration_adv.h | 43 ++++++++++++++++++ .../Tornado/V2 (MKS GEN-L)/Configuration.h | 4 ++ .../V2 (MKS GEN-L)/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/TheBorg/Configuration.h | 4 ++ config/examples/TheBorg/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/TinyBoy2/Configuration.h | 4 ++ config/examples/TinyBoy2/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Tronxy/X1/Configuration.h | 4 ++ config/examples/Tronxy/X3A/Configuration.h | 4 ++ .../examples/Tronxy/X3A/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Tronxy/X5S-2E/Configuration.h | 4 ++ .../Tronxy/X5S-2E/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Tronxy/X5S/Configuration.h | 4 ++ config/examples/Tronxy/X5SA/Configuration.h | 4 ++ .../examples/Tronxy/X5SA/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Tronxy/XY100/Configuration.h | 4 ++ .../Two Trees/BlueR Plus/Configuration.h | 4 ++ .../Two Trees/BlueR Plus/Configuration_adv.h | 43 ++++++++++++++++++ .../Two Trees/BlueR/BlueR V1/Configuration.h | 4 ++ .../BlueR/BlueR V1/Configuration_adv.h | 43 ++++++++++++++++++ .../Two Trees/BlueR/BlueR V2/Configuration.h | 4 ++ .../BlueR/BlueR V2/Configuration_adv.h | 43 ++++++++++++++++++ .../Two Trees/BlueR/BlueR V3/Configuration.h | 4 ++ .../BlueR/BlueR V3/Configuration_adv.h | 43 ++++++++++++++++++ .../Sapphire Plus V2/Configuration.h | 4 ++ .../Sapphire Plus V2/Configuration_adv.h | 43 ++++++++++++++++++ .../Two Trees/Sapphire Pro/Configuration.h | 4 ++ .../Sapphire Pro/Configuration_adv.h | 43 ++++++++++++++++++ .../UltiMachine/Archim1/Configuration.h | 4 ++ .../UltiMachine/Archim1/Configuration_adv.h | 43 ++++++++++++++++++ .../UltiMachine/Archim2/Configuration.h | 4 ++ .../UltiMachine/Archim2/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/VORONDesign/Configuration.h | 4 ++ .../examples/VORONDesign/Configuration_adv.h | 43 ++++++++++++++++++ .../examples/Velleman/K8200/Configuration.h | 4 ++ .../Velleman/K8200/Configuration_adv.h | 43 ++++++++++++++++++ .../Velleman/K8400/Dual-head/Configuration.h | 4 ++ .../K8400/Dual-head/Configuration_adv.h | 43 ++++++++++++++++++ .../K8400/Single-head/Configuration.h | 4 ++ .../K8400/Single-head/Configuration_adv.h | 43 ++++++++++++++++++ .../examples/WASP/PowerWASP/Configuration.h | 4 ++ .../WASP/PowerWASP/Configuration_adv.h | 43 ++++++++++++++++++ .../Wanhao/Duplicator 4S/Configuration.h | 4 ++ .../Wanhao/Duplicator 4S/Configuration_adv.h | 43 ++++++++++++++++++ .../Wanhao/Duplicator 6/Configuration.h | 4 ++ .../Wanhao/Duplicator 6/Configuration_adv.h | 43 ++++++++++++++++++ .../Wanhao/Duplicator i3 2.1/Configuration.h | 4 ++ .../Duplicator i3 2.1/Configuration_adv.h | 43 ++++++++++++++++++ .../Wanhao/Duplicator i3 Mini/Configuration.h | 4 ++ .../Duplicator i3 Mini/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/Weistek/wt150/Configuration.h | 4 ++ .../Weistek/wt150/Configuration_adv.h | 43 ++++++++++++++++++ .../examples/Zonestar/P802M/Configuration.h | 4 ++ .../Zonestar/P802M/Configuration_adv.h | 43 ++++++++++++++++++ .../Configuration.h | 4 ++ .../Configuration_adv.h | 43 ++++++++++++++++++ .../Kossel Linear Plus/Configuration.h | 4 ++ .../Kossel Linear Plus/Configuration_adv.h | 43 ++++++++++++++++++ .../delta/Anycubic/Kossel/Configuration.h | 4 ++ .../delta/Anycubic/Kossel/Configuration_adv.h | 43 ++++++++++++++++++ .../delta/Anycubic/Predator/Configuration.h | 4 ++ .../Anycubic/Predator/Configuration_adv.h | 43 ++++++++++++++++++ .../delta/Dreammaker/Overlord/Configuration.h | 4 ++ .../Dreammaker/Overlord/Configuration_adv.h | 43 ++++++++++++++++++ .../Dreammaker/Overlord_Pro/Configuration.h | 4 ++ .../Overlord_Pro/Configuration_adv.h | 43 ++++++++++++++++++ .../delta/FLSUN/Q5-nano_v1/Configuration.h | 4 ++ .../delta/FLSUN/Q5-nano_v2/Configuration.h | 4 ++ .../examples/delta/FLSUN/QQ-S/Configuration.h | 4 ++ .../delta/FLSUN/QQ-S/Configuration_adv.h | 43 ++++++++++++++++++ .../delta/FLSUN/QQS-Pro/Configuration.h | 4 ++ .../delta/FLSUN/QQS-Pro/Configuration_adv.h | 43 ++++++++++++++++++ .../FLSUN/auto_calibrate/Configuration.h | 4 ++ .../FLSUN/auto_calibrate/Configuration_adv.h | 43 ++++++++++++++++++ .../delta/FLSUN/kossel/Configuration.h | 4 ++ .../delta/FLSUN/kossel/Configuration_adv.h | 43 ++++++++++++++++++ .../delta/FLSUN/kossel_mini/Configuration.h | 4 ++ .../FLSUN/kossel_mini/Configuration_adv.h | 43 ++++++++++++++++++ .../delta/Geeetech/G2/Configuration.h | 4 ++ .../delta/Geeetech/G2/Configuration_adv.h | 43 ++++++++++++++++++ .../delta/Geeetech/G2Pro/Configuration.h | 4 ++ .../delta/Geeetech/G2Pro/Configuration_adv.h | 43 ++++++++++++++++++ .../delta/Geeetech/G2S/Configuration.h | 4 ++ .../delta/Geeetech/G2S/Configuration_adv.h | 43 ++++++++++++++++++ .../delta/Geeetech/G2SPro/Configuration.h | 4 ++ .../delta/Geeetech/G2SPro/Configuration_adv.h | 43 ++++++++++++++++++ .../Geeetech/Rostock 301/Configuration.h | 4 ++ .../Geeetech/Rostock 301/Configuration_adv.h | 43 ++++++++++++++++++ .../delta/Hatchbox_Alpha/Configuration.h | 4 ++ .../delta/Hatchbox_Alpha/Configuration_adv.h | 43 ++++++++++++++++++ .../examples/delta/MKS/SBASE/Configuration.h | 4 ++ .../delta/MKS/SBASE/Configuration_adv.h | 43 ++++++++++++++++++ .../delta/Malyan M300/Configuration.h | 4 ++ .../delta/Malyan M300/Configuration_adv.h | 43 ++++++++++++++++++ .../delta/Tevo Little Monster/Configuration.h | 4 ++ .../Tevo Little Monster/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/delta/generic/Configuration.h | 4 ++ .../delta/generic/Configuration_adv.h | 43 ++++++++++++++++++ .../delta/kossel_clear/Configuration.h | 4 ++ .../delta/kossel_clear/Configuration_adv.h | 43 ++++++++++++++++++ .../delta/kossel_mini/Configuration.h | 4 ++ .../examples/delta/kossel_pro/Configuration.h | 4 ++ .../examples/delta/kossel_xl/Configuration.h | 4 ++ .../delta/kossel_xl/Configuration_adv.h | 43 ++++++++++++++++++ .../examples/gCreate/gMax1.5+/Configuration.h | 4 ++ .../gCreate/gMax1.5+/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/makibox/Configuration.h | 4 ++ config/examples/makibox/Configuration_adv.h | 43 ++++++++++++++++++ config/examples/tvrrug/Round2/Configuration.h | 4 ++ .../tvrrug/Round2/Configuration_adv.h | 43 ++++++++++++++++++ 467 files changed, 10448 insertions(+) diff --git a/config/default/Configuration.h b/config/default/Configuration.h index 31c33b6bec..073565f262 100644 --- a/config/default/Configuration.h +++ b/config/default/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index 4ebe1d08c0..be75bf3831 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,15 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1538,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index 70e8b1143c..04536472a6 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -330,8 +330,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -419,6 +421,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -638,6 +641,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index a9cf9e459c..b1b78bfaca 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h index 476225b937..af814fd6da 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index dbf34dbf69..df1357587e 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h index 96bc41fe94..a3a580baad 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index a9f92b2323..e3c44e79d1 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/AlephObjects/TAZ4/Configuration.h b/config/examples/AlephObjects/TAZ4/Configuration.h index 01c4c96f53..84fdbc034b 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration.h +++ b/config/examples/AlephObjects/TAZ4/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 7 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -647,6 +650,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h index a414b46904..8c402bbfea 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h index b5c700017c..e29fcc57ed 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration.h @@ -367,8 +367,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -456,6 +458,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -692,6 +695,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed //#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index b48496c9a5..0203c926c9 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1505,6 +1547,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h index ab542728b1..1e5fdcbb21 100644 --- a/config/examples/Alfawise/U20/Configuration.h +++ b/config/examples/Alfawise/U20/Configuration.h @@ -367,8 +367,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -456,6 +458,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -693,6 +696,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed //#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index 67524675d8..57a9980daa 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index c929044381..607142deff 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index a581405345..717cec2d9f 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 20 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index bb13003a70..ea8e638f28 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index 95b6a43c6c..3355ce2fa1 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index f450781b76..43c5147568 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index 28c88113f3..8d9c383bc1 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index f450781b76..43c5147568 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index 98db548b93..c7098f8833 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 11 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index 7e52c48281..421cf57d90 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index cee05e043a..cc21e8674c 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -330,8 +330,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -419,6 +421,7 @@ #define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -639,6 +642,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index 5b5bba10b4..938dcbca84 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h index 74304cf9bc..36009e3eb7 100644 --- a/config/examples/Anet/A8plus/Configuration.h +++ b/config/examples/Anet/A8plus/Configuration.h @@ -330,8 +330,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -419,6 +421,7 @@ #define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -638,6 +641,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index 96e7eaee62..a581d42e7e 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Anet/A9/Configuration.h b/config/examples/Anet/A9/Configuration.h index ad710fa840..ce48cb4260 100644 --- a/config/examples/Anet/A9/Configuration.h +++ b/config/examples/Anet/A9/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h index e2398ee37d..8282172335 100644 --- a/config/examples/Anet/A9/Configuration_adv.h +++ b/config/examples/Anet/A9/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Anet/E10/Configuration.h b/config/examples/Anet/E10/Configuration.h index 8a584b248a..a1540b5f97 100644 --- a/config/examples/Anet/E10/Configuration.h +++ b/config/examples/Anet/E10/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index 979f5bfbfd..05c9a194f7 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating //#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h index 8c6a1b93d3..953d7bf92a 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -638,6 +641,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h index 9a9ab92184..234a42fe1c 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Anet/E16/Stock/Configuration.h b/config/examples/Anet/E16/Stock/Configuration.h index 0cf4cd8822..08efb42ce9 100644 --- a/config/examples/Anet/E16/Stock/Configuration.h +++ b/config/examples/Anet/E16/Stock/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -638,6 +641,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h index bd1212c9d2..69238146dc 100644 --- a/config/examples/Anet/E16/Stock/Configuration_adv.h +++ b/config/examples/Anet/E16/Stock/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Anet/ET4+/Configuration.h b/config/examples/Anet/ET4+/Configuration.h index 604289f378..69a9aeac1b 100644 --- a/config/examples/Anet/ET4+/Configuration.h +++ b/config/examples/Anet/ET4+/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -642,6 +645,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h index d6d69d357e..cb550f10a7 100644 --- a/config/examples/Anet/ET4+/Configuration_adv.h +++ b/config/examples/Anet/ET4+/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Anet/ET4-Pro/Configuration.h b/config/examples/Anet/ET4-Pro/Configuration.h index c82a743a5c..5d490d58e6 100644 --- a/config/examples/Anet/ET4-Pro/Configuration.h +++ b/config/examples/Anet/ET4-Pro/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -642,6 +645,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h index d6d69d357e..cb550f10a7 100644 --- a/config/examples/Anet/ET4-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET4-Pro/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Anet/ET4/Configuration.h b/config/examples/Anet/ET4/Configuration.h index 60cb54d07a..e100a7a8fe 100644 --- a/config/examples/Anet/ET4/Configuration.h +++ b/config/examples/Anet/ET4/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -642,6 +645,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h index be61e0f424..d124bf667d 100644 --- a/config/examples/Anet/ET4/Configuration_adv.h +++ b/config/examples/Anet/ET4/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Anet/ET4X/Configuration.h b/config/examples/Anet/ET4X/Configuration.h index 6a22505342..3e7d89a030 100644 --- a/config/examples/Anet/ET4X/Configuration.h +++ b/config/examples/Anet/ET4X/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -642,6 +645,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h index be61e0f424..d124bf667d 100644 --- a/config/examples/Anet/ET4X/Configuration_adv.h +++ b/config/examples/Anet/ET4X/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Anet/ET5-Pro/Configuration.h b/config/examples/Anet/ET5-Pro/Configuration.h index 12d6acab21..fd7f1131fb 100644 --- a/config/examples/Anet/ET5-Pro/Configuration.h +++ b/config/examples/Anet/ET5-Pro/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h index 922dec1a7a..64e8544d69 100644 --- a/config/examples/Anet/ET5-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET5-Pro/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Anet/ET5/Configuration.h b/config/examples/Anet/ET5/Configuration.h index 1f8f76af39..3eb556c5c3 100644 --- a/config/examples/Anet/ET5/Configuration.h +++ b/config/examples/Anet/ET5/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h index 922dec1a7a..64e8544d69 100644 --- a/config/examples/Anet/ET5/Configuration_adv.h +++ b/config/examples/Anet/ET5/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Anet/ET5X/Configuration.h b/config/examples/Anet/ET5X/Configuration.h index 89350cb13e..819e2365da 100644 --- a/config/examples/Anet/ET5X/Configuration.h +++ b/config/examples/Anet/ET5X/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h index 922dec1a7a..64e8544d69 100644 --- a/config/examples/Anet/ET5X/Configuration_adv.h +++ b/config/examples/Anet/ET5X/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/AnyCubic/Chiron/Configuration.h b/config/examples/AnyCubic/Chiron/Configuration.h index c2600d0d98..7f7b0df29c 100644 --- a/config/examples/AnyCubic/Chiron/Configuration.h +++ b/config/examples/AnyCubic/Chiron/Configuration.h @@ -333,8 +333,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -422,6 +424,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -640,6 +643,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed //#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h index cc3f42a626..0616e4d7bf 100644 --- a/config/examples/AnyCubic/Chiron/Configuration_adv.h +++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 80 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h index 345f5f172d..0b6e1674c9 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h @@ -330,8 +330,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -419,6 +421,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -638,6 +641,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h index bb56c96ecb..ea3be4b225 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h index 27a0cd268e..b7d00751a0 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h index 4800d9d1c6..883c75a8df 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/AnyCubic/i3 Mega/Configuration.h b/config/examples/AnyCubic/i3 Mega/Configuration.h index a56f08a212..d5b0c19c1e 100644 --- a/config/examples/AnyCubic/i3 Mega/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Configuration.h @@ -334,8 +334,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -423,6 +425,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -641,6 +644,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h index ad919f2cc8..49b271a4b1 100644 --- a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index f31250e22b..54a2935ca7 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index 45428757e0..97ac3dcf7b 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index 4e16ced74d..ce17adf564 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 13 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 2ce8756339..41c64b6a46 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -117,6 +117,12 @@ #define HEATER_0_INVERTING true #define HEATER_1_INVERTING true +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -183,6 +189,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -252,6 +277,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -497,11 +536,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1499,6 +1541,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Artillery/Genius/Configuration.h b/config/examples/Artillery/Genius/Configuration.h index 4b918bb16f..5732a7fca9 100644 --- a/config/examples/Artillery/Genius/Configuration.h +++ b/config/examples/Artillery/Genius/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Artillery/Genius/Configuration_adv.h b/config/examples/Artillery/Genius/Configuration_adv.h index 33634b5232..5013f5fd78 100644 --- a/config/examples/Artillery/Genius/Configuration_adv.h +++ b/config/examples/Artillery/Genius/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Artillery/Sidewinder X1/Configuration.h b/config/examples/Artillery/Sidewinder X1/Configuration.h index 64d3ce0ae1..fdc5316afe 100644 --- a/config/examples/Artillery/Sidewinder X1/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h index 33634b5232..5013f5fd78 100644 --- a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h index 6efefd99bc..06c16f2175 100644 --- a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -651,6 +654,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h index 8e7423b1be..0df6516d4e 100644 --- a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index bca43ef730..c2b9bb7449 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Azteeg/X5GT/Configuration_adv.h b/config/examples/Azteeg/X5GT/Configuration_adv.h index 6c81371560..625d591536 100644 --- a/config/examples/Azteeg/X5GT/Configuration_adv.h +++ b/config/examples/Azteeg/X5GT/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index 708479c7d7..0be4763908 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index b43f8b3645..8839b1730b 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index bba23f02c5..2736828f5d 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 60 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -592,6 +595,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 9a1dddb8cd..bf8e6837b5 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -172,6 +178,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -241,6 +266,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -486,11 +525,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1488,6 +1530,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/BIQU/B1-BLTouch/Configuration.h b/config/examples/BIQU/B1-BLTouch/Configuration.h index e151b66ac9..db8621a366 100644 --- a/config/examples/BIQU/B1-BLTouch/Configuration.h +++ b/config/examples/BIQU/B1-BLTouch/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/BIQU/B1-BLTouch/Configuration_adv.h b/config/examples/BIQU/B1-BLTouch/Configuration_adv.h index 983e8a5140..adc7a1d2ae 100644 --- a/config/examples/BIQU/B1-BLTouch/Configuration_adv.h +++ b/config/examples/BIQU/B1-BLTouch/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/BIQU/B1/Configuration.h b/config/examples/BIQU/B1/Configuration.h index 9328968a89..c86efbc3d8 100644 --- a/config/examples/BIQU/B1/Configuration.h +++ b/config/examples/BIQU/B1/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/BIQU/B1/Configuration_adv.h b/config/examples/BIQU/B1/Configuration_adv.h index 180f07d721..ae2aedef3e 100644 --- a/config/examples/BIQU/B1/Configuration_adv.h +++ b/config/examples/BIQU/B1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index fa32bd0990..13cae8676c 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index 7fe0fddeb7..e021fc85b0 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index e02a7af2f9..b318764cdc 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -337,8 +337,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -426,6 +428,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -650,6 +653,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index 6886b86860..342f7ff454 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1503,6 +1545,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index e917285f99..28bcc80051 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index 7fe0fddeb7..e021fc85b0 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h index 7d1a061fb7..312fa8865c 100644 --- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h +++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index 1f60ebf258..1cf76a88e7 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -330,8 +330,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -419,6 +421,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -652,6 +655,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index 2929dbc161..863aafa297 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 35 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Copymaster3D/300/Configuration.h b/config/examples/Copymaster3D/300/Configuration.h index 812931d514..5d62eebd78 100644 --- a/config/examples/Copymaster3D/300/Configuration.h +++ b/config/examples/Copymaster3D/300/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Copymaster3D/400/Configuration.h b/config/examples/Copymaster3D/400/Configuration.h index 91b6c0ec31..c540d11036 100644 --- a/config/examples/Copymaster3D/400/Configuration.h +++ b/config/examples/Copymaster3D/400/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Copymaster3D/500/Configuration.h b/config/examples/Copymaster3D/500/Configuration.h index ccc16e320c..b222c7731f 100644 --- a/config/examples/Copymaster3D/500/Configuration.h +++ b/config/examples/Copymaster3D/500/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h index 5d8ac74765..a1eca97269 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h @@ -338,8 +338,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -427,6 +429,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -645,6 +648,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h index c3b84f2119..d74beb5e49 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h index c7ce983bd0..1b375086cc 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed //#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h index b4833eb21e..266bb7fb14 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap #define STATUS_FAN_FRAMES 4 diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h index 4f5963cfb1..c7e9a26daa 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h index 1393560aec..45773d6bfb 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h index 583ac09cea..fd7ec1afda 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h index 1393560aec..45773d6bfb 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/CR-10 V2/Configuration.h b/config/examples/Creality/CR-10 V2/Configuration.h index 621f6dcbb8..0a88b1a77d 100644 --- a/config/examples/Creality/CR-10 V2/Configuration.h +++ b/config/examples/Creality/CR-10 V2/Configuration.h @@ -336,8 +336,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -425,6 +427,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -645,6 +648,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index f37f94e93f..e8ed6428ea 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h index 4646cbe2c0..ceeb91a19f 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -635,6 +638,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 94fc02032c..9cf41060ae 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration.h b/config/examples/Creality/CR-10/CrealityV1/Configuration.h index 1c96959ae9..9fc2ded615 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h index 8a88d19484..02581c9947 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h index 78807f4e7a..7f0b936f5f 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h index 11007e21ca..74e380288c 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h index 24ad016b71..fafd9bb0ff 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 41dde8c18d..16d7238bdd 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h index 5fce4f8a5b..38f5021477 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h index aa14c0c261..3e926e132c 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h index d9f04ec229..35d732a442 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration.h +++ b/config/examples/Creality/CR-20 Pro/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index ade4de8c44..d0cfab7e98 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/CR-20/Configuration.h b/config/examples/Creality/CR-20/Configuration.h index de220e5d04..e4e49ae414 100644 --- a/config/examples/Creality/CR-20/Configuration.h +++ b/config/examples/Creality/CR-20/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index 9dc09470e2..300d621305 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/CR-6 SE/Configuration.h b/config/examples/Creality/CR-6 SE/Configuration.h index 8464a93e8a..bd22f507cc 100644 --- a/config/examples/Creality/CR-6 SE/Configuration.h +++ b/config/examples/Creality/CR-6 SE/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed //#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/CR-6 SE/Configuration_adv.h b/config/examples/Creality/CR-6 SE/Configuration_adv.h index b60466f496..f8d546949e 100644 --- a/config/examples/Creality/CR-6 SE/Configuration_adv.h +++ b/config/examples/Creality/CR-6 SE/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1496,6 +1538,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index 1d3482d3b2..d596ffa1c9 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index fa191bbc93..da46ed0c06 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index bf9d815d83..0d23ef494f 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index a5c5f17a1a..6ca6c7e8a4 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h index 834edaa920..ae180caef7 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 4f47bcd8bc..2f09ffd8bf 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index 38c00d8f88..6cdc20c313 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 348fd2da15..8af386bcc0 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h index 3a85b981f0..103d740633 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 199bc46890..22e42051f4 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h index f676bceb54..e1d6839dd9 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h index b2c4babbc1..20e348951b 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h index e25d7769a5..0f6c28f728 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed //#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h index b82b82c36c..55ed62f167 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1496,6 +1538,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h index 257da99c1f..3baca62bee 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h index cc1b18ab7c..ea4dab1aa6 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-3 V2/Configuration.h b/config/examples/Creality/Ender-3 V2/Configuration.h index 2e07fc02c6..c95c502e5e 100644 --- a/config/examples/Creality/Ender-3 V2/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed //#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-3 V2/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/Configuration_adv.h index fe603e97be..0ea9fe2920 100644 --- a/config/examples/Creality/Ender-3 V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1496,6 +1538,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h index 037020d966..38811eee74 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -635,6 +638,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h index 84c6784629..2bc71cef24 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h index f5779eacbd..de35b8e8c9 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -635,6 +638,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h index d9708f703b..68d63297b6 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h index 448c73dcc1..51131dea1d 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -635,6 +638,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h index 84c6784629..2bc71cef24 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h index 8758848c7a..b0287d2a44 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h index 29a3d1d44f..d13bdd48ee 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h index 9910b259ec..9f390cf323 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -635,6 +638,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 092743668a..3e160912e8 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h index 25d28700d8..0df593bd78 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -635,6 +638,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index f7ca73c83c..f894621b73 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h index 9ce65dd923..82d5881f39 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -635,6 +638,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 5dcb538554..5daf8c4695 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h index d0c102bcc4..f6f87e35c3 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index f385882c8d..f20a5c8dae 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h index 02cb66b122..6a24a5f9fc 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -643,6 +646,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h index f385882c8d..f20a5c8dae 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h index e370cebaba..986f57dca0 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -643,6 +646,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h index aefe9dba9f..5fefcac357 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h index b57b7fed56..23f1aaf36e 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index e993588dca..4f7c7741ab 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h index d5cdef7af8..76ed0d8855 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index e993588dca..4f7c7741ab 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h index 7c8c8b7478..aa08303e66 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index e993588dca..4f7c7741ab 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h index a4a556a817..120955fdda 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index e993588dca..4f7c7741ab 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h index abd83f1349..80e6aae60b 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -642,6 +645,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed //#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index 184cd3b421..6893c6ca36 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap #define STATUS_FAN_FRAMES 4 diff --git a/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration.h index 947531f32f..bc8c547311 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -635,6 +638,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h index a272be4ee3..8b857ad7dc 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h index e64bf4b766..9b591a1bdd 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h index 20b322c6f7..a8ae2bf1ba 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index 5caf55873e..34f2ded565 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index c320daf863..67f51a69ec 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-5 Plus/Configuration.h b/config/examples/Creality/Ender-5 Plus/Configuration.h index 74f1a0d68d..a44d469497 100644 --- a/config/examples/Creality/Ender-5 Plus/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/Configuration.h @@ -331,8 +331,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -420,6 +422,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -642,6 +645,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed //#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h index f78e17d080..e35274bfa1 100644 --- a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h index 7c5b0a5c13..8ad24f633b 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index 662bce00f5..52677a42e6 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h index 88388ca57d..bc09285d4d 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h index bda0649842..5fa601608f 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index 59ec5a74c2..69bd999d8f 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -635,6 +638,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 7b8dd4d08a..ef158bbcd5 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 50 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h index 931fdbb294..ccba14edef 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h index 1d2a7645c5..10e788d5bd 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h index 3a4985aaf7..24ee9e35c7 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h index 342abf7c56..5188bd9efa 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h index 7d4c7f4ce0..d3aca1e3ef 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h index 1d2a7645c5..10e788d5bd 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h index 9b17f59958..127eebe3ce 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h @@ -339,8 +339,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -434,6 +436,7 @@ #if ENABLED(chamber) #define TEMP_SENSOR_CHAMBER 1 #endif +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -659,6 +662,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h index d70a57a5b3..ea597de39d 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -497,11 +536,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1499,6 +1541,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h index 1e9203496e..b831e35dc4 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index 662bce00f5..52677a42e6 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h index fa71922167..9f37ad1963 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h index bda0649842..5fa601608f 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h index f1b5101306..5d7addeeca 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -635,6 +638,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 6202e673ca..cb5d6ae00c 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h index 852f2a318f..58fc69b8fe 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -635,6 +638,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 76b76ae6ab..81bcd38a84 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h index 49db30a66b..2f19f519c0 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h index 6d2ca95a99..702b64df67 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h index d25d663229..da460c8460 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h index 6d2ca95a99..702b64df67 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Creality/Ender-6/Configuration.h b/config/examples/Creality/Ender-6/Configuration.h index 05336919c0..80c10dee8a 100644 --- a/config/examples/Creality/Ender-6/Configuration.h +++ b/config/examples/Creality/Ender-6/Configuration.h @@ -332,8 +332,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -421,6 +423,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -639,6 +642,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Creality/Ender-6/Configuration_adv.h b/config/examples/Creality/Ender-6/Configuration_adv.h index f6d99a2465..7c34651f79 100644 --- a/config/examples/Creality/Ender-6/Configuration_adv.h +++ b/config/examples/Creality/Ender-6/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h index 05da9639c3..02f1172272 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 8779086337..b0f2c274cd 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Daycom/3DP-100/Configuration.h b/config/examples/Daycom/3DP-100/Configuration.h index c7a9f789fe..33a78fe092 100644 --- a/config/examples/Daycom/3DP-100/Configuration.h +++ b/config/examples/Daycom/3DP-100/Configuration.h @@ -331,8 +331,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -420,6 +422,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -639,6 +642,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index 8f67b01a9b..9f043e47a9 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration.h b/config/examples/EXP3D/Imprimante multifonction/Configuration.h index 991ba19152..5e99f50b9c 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index b39630a4e6..475d1cd478 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 5 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ //#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating //#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index bd0000bd72..c70cd1ac82 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index 2afeb32b59..a849b88a7a 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Eryone/Thinker SE/Thinker V2 board/stock/Configuration.h b/config/examples/Eryone/Thinker SE/Thinker V2 board/stock/Configuration.h index f3f0e9f7aa..0d50f5e574 100644 --- a/config/examples/Eryone/Thinker SE/Thinker V2 board/stock/Configuration.h +++ b/config/examples/Eryone/Thinker SE/Thinker V2 board/stock/Configuration.h @@ -335,8 +335,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -424,6 +426,7 @@ #define TEMP_SENSOR_BED 13 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -642,6 +645,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Eryone/Thinker SE/Thinker V2 board/stock/Configuration_adv.h b/config/examples/Eryone/Thinker SE/Thinker V2 board/stock/Configuration_adv.h index c516eba193..72c3133a8b 100644 --- a/config/examples/Eryone/Thinker SE/Thinker V2 board/stock/Configuration_adv.h +++ b/config/examples/Eryone/Thinker SE/Thinker V2 board/stock/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h index d49f68eb85..9e97f9e34a 100644 --- a/config/examples/FYSETC/AIO_II/Configuration.h +++ b/config/examples/FYSETC/AIO_II/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index 6b166aff7d..a8a15dd1c5 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h index 7212dd88e1..0b02c896c0 100644 --- a/config/examples/FYSETC/F6_13/Configuration.h +++ b/config/examples/FYSETC/F6_13/Configuration.h @@ -331,8 +331,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -420,6 +422,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -638,6 +641,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index 710410550e..80500d9b96 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/FYSETC/S6/Configuration.h b/config/examples/FYSETC/S6/Configuration.h index 970fc6c120..f83a94f7d2 100644 --- a/config/examples/FYSETC/S6/Configuration.h +++ b/config/examples/FYSETC/S6/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index 1c82d4dd5d..b47d3ef169 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index 139d7d6736..46248d0667 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index 6b1457be51..b171a07b37 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Felix/Single/Configuration.h b/config/examples/Felix/Single/Configuration.h index f0706c6d10..763ec766c6 100644 --- a/config/examples/Felix/Single/Configuration.h +++ b/config/examples/Felix/Single/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index 6b1457be51..b171a07b37 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/FlashForge/Creator 2X/Configuration.h b/config/examples/FlashForge/Creator 2X/Configuration.h index 493ee4f221..f863aea7d4 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration.h +++ b/config/examples/FlashForge/Creator 2X/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index e17752f56f..0ee977fa0a 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index 731a7a4a9f..44edb26f83 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index 770915ea44..23415ff6c5 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1494,6 +1536,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/FlyingBear/P905H/Configuration.h b/config/examples/FlyingBear/P905H/Configuration.h index 9b809eff06..d7c2e67ffa 100644 --- a/config/examples/FlyingBear/P905H/Configuration.h +++ b/config/examples/FlyingBear/P905H/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 11 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index 9c92fb571c..249e6e5092 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1498,6 +1540,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index a84dc358da..eb1953ab4a 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index 8e2dfe14d5..72744e520d 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index cd27218ff8..a907b7934e 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -372,8 +372,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -465,6 +467,7 @@ #endif #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -695,6 +698,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index 0bbe0e86f5..edf0b0f46d 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h index 61ba39c6d8..34b3ecfc65 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 11 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed //#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index f6a33be1b7..65de789536 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h index 6655e4a8f4..23c27fc428 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration.h +++ b/config/examples/Formbot/T_Rex_3/Configuration.h @@ -332,8 +332,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -421,6 +423,7 @@ #define TEMP_SENSOR_BED 11 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -640,6 +643,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index 093f93b7db..2e4e57ce50 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1499,6 +1541,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h index bef024f643..d8241e4e2c 100644 --- a/config/examples/Geeetech/A10/Configuration.h +++ b/config/examples/Geeetech/A10/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index b10e58526c..1615b5662d 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Geeetech/A10D/Configuration.h b/config/examples/Geeetech/A10D/Configuration.h index 757c01324c..0b187e45c5 100644 --- a/config/examples/Geeetech/A10D/Configuration.h +++ b/config/examples/Geeetech/A10D/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -635,6 +638,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index 7323957920..f80e860089 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Geeetech/A10M/Configuration.h b/config/examples/Geeetech/A10M/Configuration.h index 09dd2292de..5e6339c622 100644 --- a/config/examples/Geeetech/A10M/Configuration.h +++ b/config/examples/Geeetech/A10M/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h index d2a656c189..756746cbe3 100644 --- a/config/examples/Geeetech/A10M/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling #define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap #define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap #define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Geeetech/A10T/Configuration.h b/config/examples/Geeetech/A10T/Configuration.h index 6af6898e40..5bfc0d76d3 100644 --- a/config/examples/Geeetech/A10T/Configuration.h +++ b/config/examples/Geeetech/A10T/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Geeetech/A10T/Configuration_adv.h b/config/examples/Geeetech/A10T/Configuration_adv.h index d2a656c189..756746cbe3 100644 --- a/config/examples/Geeetech/A10T/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling #define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap #define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap #define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Geeetech/A20/Configuration.h b/config/examples/Geeetech/A20/Configuration.h index 924ca834b9..9f616abb3e 100644 --- a/config/examples/Geeetech/A20/Configuration.h +++ b/config/examples/Geeetech/A20/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index 58860ca110..b11fc10751 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling #define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap #define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap #define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index c3b808b5ce..11bd9ef052 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index 58860ca110..b11fc10751 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling #define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap #define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap #define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Geeetech/A20T/Configuration.h b/config/examples/Geeetech/A20T/Configuration.h index 49d89bb4af..604b6b4b1c 100644 --- a/config/examples/Geeetech/A20T/Configuration.h +++ b/config/examples/Geeetech/A20T/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index 58860ca110..b11fc10751 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling #define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap #define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap #define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Geeetech/A30/Configuration.h b/config/examples/Geeetech/A30/Configuration.h index 3242fea6c7..96c81d8cda 100644 --- a/config/examples/Geeetech/A30/Configuration.h +++ b/config/examples/Geeetech/A30/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -634,6 +637,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index 353c93967c..7965ae5a40 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Geeetech/D200/Configuration.h b/config/examples/Geeetech/D200/Configuration.h index f90d5df6e0..1f0ab24c3e 100644 --- a/config/examples/Geeetech/D200/Configuration.h +++ b/config/examples/Geeetech/D200/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -634,6 +637,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index cc8abbec07..2828fc7e8e 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Geeetech/Duplicator5/Configuration.h b/config/examples/Geeetech/Duplicator5/Configuration.h index 608cb603e0..9572c5c38c 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration.h +++ b/config/examples/Geeetech/Duplicator5/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index 1c82d4dd5d..b47d3ef169 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Geeetech/E180/Configuration.h b/config/examples/Geeetech/E180/Configuration.h index 6c82331b0e..619f66836c 100644 --- a/config/examples/Geeetech/E180/Configuration.h +++ b/config/examples/Geeetech/E180/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -635,6 +638,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index 353c93967c..7965ae5a40 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index ceaa7c7145..b33d66405e 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -641,6 +644,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index db20cf4c49..6a1660c978 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Geeetech/M201/Configuration.h b/config/examples/Geeetech/M201/Configuration.h index f4bf66ef1f..cce55ea426 100644 --- a/config/examples/Geeetech/M201/Configuration.h +++ b/config/examples/Geeetech/M201/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -634,6 +637,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index cc8abbec07..2828fc7e8e 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index ccf0d48e26..7349cf2fcd 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -635,6 +638,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index eae38f212b..89211b0b6e 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Geeetech/Me_creator/Configuration.h b/config/examples/Geeetech/Me_creator/Configuration.h index cd88d83a61..7a83d5b82c 100644 --- a/config/examples/Geeetech/Me_creator/Configuration.h +++ b/config/examples/Geeetech/Me_creator/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index 1c82d4dd5d..b47d3ef169 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Geeetech/Me_ducer/Configuration.h b/config/examples/Geeetech/Me_ducer/Configuration.h index 3639451ddd..327f48a500 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration.h +++ b/config/examples/Geeetech/Me_ducer/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index 776e1935b4..7c68a5b153 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Geeetech/PI3A PRO/Configuration.h b/config/examples/Geeetech/PI3A PRO/Configuration.h index c40655c0e4..8818dfc3d1 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -641,6 +644,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index b9a676e6cd..6b3eef8a5f 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index 51a111aa41..670b5a960b 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -641,6 +644,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 1f7e9c6f91..16baed2001 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -641,6 +644,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index 1cfe259627..6c0e43694d 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index b10e58526c..1615b5662d 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index 290a10a718..e76a79b759 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index b10e58526c..1615b5662d 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h index 2a7a677675..529b7f9fa6 100644 --- a/config/examples/HMS434/Configuration.h +++ b/config/examples/HMS434/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -416,6 +418,7 @@ #define TEMP_SENSOR_BED 331 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 331 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -634,6 +637,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index ac16245679..09fdad1840 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -484,11 +523,14 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 35 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 28 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1486,6 +1528,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index b8e2f13398..adfb888e0d 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 37cb02fe9d..9453b62354 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration.h b/config/examples/Intamsys/FunmatHT 4988/Configuration.h index cb0a8be2d5..4cad478610 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 1 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h index fa67b23547..5c236e7472 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -178,6 +184,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -247,6 +272,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -492,11 +531,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1494,6 +1536,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h index 8a01dae16c..3b2e29dff7 100644 --- a/config/examples/JGAurora/A1/Configuration.h +++ b/config/examples/JGAurora/A1/Configuration.h @@ -330,8 +330,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -419,6 +421,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -640,6 +643,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index c98fdb1b9d..85d810bf87 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -118,6 +118,12 @@ //#define HEATER_1_INVERTING 0 #define FAN_INVERTING 1 +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -184,6 +190,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -253,6 +278,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -498,11 +537,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1500,6 +1542,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/JGAurora/A3/Configuration.h b/config/examples/JGAurora/A3/Configuration.h index d342d37607..688f4e037e 100644 --- a/config/examples/JGAurora/A3/Configuration.h +++ b/config/examples/JGAurora/A3/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index 71fb79dca9..c940d5c0b8 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -334,8 +334,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -423,6 +425,7 @@ #define TEMP_SENSOR_BED 1 // measured to be satisfactorily accurate on center of bed within +/- 1 degC. #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -644,6 +647,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index 2315c808d8..b0b89b05ec 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h index 09d7107a9c..a9402ddcde 100644 --- a/config/examples/JGAurora/A5S/Configuration.h +++ b/config/examples/JGAurora/A5S/Configuration.h @@ -330,8 +330,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -419,6 +421,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -640,6 +643,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index c98fdb1b9d..85d810bf87 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -118,6 +118,12 @@ //#define HEATER_1_INVERTING 0 #define FAN_INVERTING 1 +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -184,6 +190,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -253,6 +278,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -498,11 +537,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1500,6 +1542,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/JGAurora/Magic/Configuration.h b/config/examples/JGAurora/Magic/Configuration.h index 0289856deb..73b77c777b 100644 --- a/config/examples/JGAurora/Magic/Configuration.h +++ b/config/examples/JGAurora/Magic/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index 05b08fded5..9e8921ffcc 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Kingroon/KP3/Configuration.h b/config/examples/Kingroon/KP3/Configuration.h index 76c6c0ae5a..8d85a49f85 100644 --- a/config/examples/Kingroon/KP3/Configuration.h +++ b/config/examples/Kingroon/KP3/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -635,6 +638,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index b5de94b571..6a7be4b783 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Labists/ET4/Configuration.h b/config/examples/Labists/ET4/Configuration.h index f1af478181..8aca504062 100644 --- a/config/examples/Labists/ET4/Configuration.h +++ b/config/examples/Labists/ET4/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -642,6 +645,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Labists/ET4/Configuration_adv.h b/config/examples/Labists/ET4/Configuration_adv.h index d6d69d357e..cb550f10a7 100644 --- a/config/examples/Labists/ET4/Configuration_adv.h +++ b/config/examples/Labists/ET4/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/MBot/Cube/Configuration.h b/config/examples/MBot/Cube/Configuration.h index c56eeffe5d..e3ffac6951 100644 --- a/config/examples/MBot/Cube/Configuration.h +++ b/config/examples/MBot/Cube/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed //#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index e046198a52..20fc20fc29 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration.h b/config/examples/MakerFarm/Pegasus 12/Configuration.h index 0a6fa3a570..21d1f5d385 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -642,6 +645,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h index 1e477869ea..991556bb3a 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index 25698a1128..63fa5ec08b 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 1fd8ab6419..ed61cd2c44 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index 8cc8e0e9c3..9e4b120712 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -334,8 +334,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -426,6 +428,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -645,6 +648,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index 4c42fe95f9..a088b9889d 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index a04aacd6ac..51be53ebca 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 11 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -642,6 +645,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index 237fab5f06..e3f0a8df75 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -495,11 +534,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1497,6 +1539,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index 54cdff052b..2f6b419aa1 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index f513bc3320..53a81cdc75 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 27dc3c929a..25d73bb358 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index 19d84c7e71..0a49195fa8 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index 6c81371560..625d591536 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Mks/Robin_Lite3/Configuration.h b/config/examples/Mks/Robin_Lite3/Configuration.h index c64e441403..85aa355374 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration.h +++ b/config/examples/Mks/Robin_Lite3/Configuration.h @@ -336,8 +336,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -425,6 +427,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -643,6 +646,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Mks/Robin_Pro/Configuration.h b/config/examples/Mks/Robin_Pro/Configuration.h index b92b7247b4..e360692567 100644 --- a/config/examples/Mks/Robin_Pro/Configuration.h +++ b/config/examples/Mks/Robin_Pro/Configuration.h @@ -331,8 +331,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -420,6 +422,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -638,6 +641,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index 0697967c3e..b578b9588b 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index c928fa1fe1..1a03187daa 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Modix/Big60/Configuration.h b/config/examples/Modix/Big60/Configuration.h index aabd6b5e8b..bec314ce27 100644 --- a/config/examples/Modix/Big60/Configuration.h +++ b/config/examples/Modix/Big60/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index 4eff6fba84..9e5e6ca653 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Ortur 4/Configuration.h b/config/examples/Ortur 4/Configuration.h index 43ae17573f..2b729a2ee0 100644 --- a/config/examples/Ortur 4/Configuration.h +++ b/config/examples/Ortur 4/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index 8fe6cb7e34..246c690b87 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating //#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling #define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap #define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index 8422c6e3be..0e65dee2de 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -330,8 +330,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -419,6 +421,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration.h b/config/examples/Printrbot/Simple Metal RevD/Configuration.h index 530c990e35..f63c2ab1c2 100644 --- a/config/examples/Printrbot/Simple Metal RevD/Configuration.h +++ b/config/examples/Printrbot/Simple Metal RevD/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 0 // Printrbot heated bed change to 1 to enable #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed //#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h index 121272cd0d..863f6c5da1 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 1 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index 77571968c6..060aae3142 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 8 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Qidi/Qidi 1/Configuration.h b/config/examples/Qidi/Qidi 1/Configuration.h index b87d965753..39c452d4ca 100644 --- a/config/examples/Qidi/Qidi 1/Configuration.h +++ b/config/examples/Qidi/Qidi 1/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed //#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index 231541cc66..276b5b522b 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Raiscube/A8r/Configuration.h b/config/examples/Raiscube/A8r/Configuration.h index ae9c3e5c7b..4e62302a46 100644 --- a/config/examples/Raiscube/A8r/Configuration.h +++ b/config/examples/Raiscube/A8r/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 11 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Raiscube/A8r/Configuration_adv.h b/config/examples/Raiscube/A8r/Configuration_adv.h index 7e52c48281..421cf57d90 100644 --- a/config/examples/Raiscube/A8r/Configuration_adv.h +++ b/config/examples/Raiscube/A8r/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index 201d4bcf38..4d0f3f5e24 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index e91d9eff39..7d50d4cc67 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Renkforce/RF100/Configuration.h b/config/examples/Renkforce/RF100/Configuration.h index a556d6ed1c..ed9380b44a 100644 --- a/config/examples/Renkforce/RF100/Configuration.h +++ b/config/examples/Renkforce/RF100/Configuration.h @@ -332,8 +332,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -421,6 +423,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -640,6 +643,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index f8d2cd69e4..91edac7165 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 100 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Renkforce/RF100XL/Configuration.h b/config/examples/Renkforce/RF100XL/Configuration.h index 81422eb34e..3984afcfbb 100644 --- a/config/examples/Renkforce/RF100XL/Configuration.h +++ b/config/examples/Renkforce/RF100XL/Configuration.h @@ -332,8 +332,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -421,6 +423,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -640,6 +643,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index f8d2cd69e4..91edac7165 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 100 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Renkforce/RF100v2/Configuration.h b/config/examples/Renkforce/RF100v2/Configuration.h index 42a65eb267..b1ee9127ad 100644 --- a/config/examples/Renkforce/RF100v2/Configuration.h +++ b/config/examples/Renkforce/RF100v2/Configuration.h @@ -332,8 +332,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -421,6 +423,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -640,6 +643,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index f8d2cd69e4..91edac7165 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 100 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index e740f267f8..33879ea1d8 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 // Sanguinololu v1.3 with 4.7kOhm pullup #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index e23bb818d1..e44034759c 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index 642dafb230..16f4aabe68 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -332,8 +332,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -421,6 +423,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -649,6 +652,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 6bfde08522..e44c1e9383 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Robo3D/R1+/Configuration.h b/config/examples/Robo3D/R1+/Configuration.h index ca481f2b15..c02bb94d00 100644 --- a/config/examples/Robo3D/R1+/Configuration.h +++ b/config/examples/Robo3D/R1+/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 // ncrmro #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/SCARA/MP_SCARA/Configuration.h b/config/examples/SCARA/MP_SCARA/Configuration.h index 0f67f7b15b..611325e457 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration.h +++ b/config/examples/SCARA/MP_SCARA/Configuration.h @@ -374,8 +374,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -463,6 +465,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -682,6 +685,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index 619567c7a1..b62f107e76 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -490,11 +529,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1492,6 +1534,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/SCARA/Morgan/Configuration.h b/config/examples/SCARA/Morgan/Configuration.h index 59ef09a8a6..24f4ccc9f4 100644 --- a/config/examples/SCARA/Morgan/Configuration.h +++ b/config/examples/SCARA/Morgan/Configuration.h @@ -374,8 +374,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -463,6 +465,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -682,6 +685,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index c98c31b039..38451e50e6 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -490,11 +529,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1492,6 +1534,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index 7784d46e35..0268e2af00 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 1 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index c73bd74abf..d206c7bf17 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/STM32/STM32F103RE/Configuration.h b/config/examples/STM32/STM32F103RE/Configuration.h index 32aeaac6f3..2a71c556cc 100644 --- a/config/examples/STM32/STM32F103RE/Configuration.h +++ b/config/examples/STM32/STM32F103RE/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -419,6 +421,7 @@ #define TEMP_SENSOR_BED 998 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 60 @@ -638,6 +641,7 @@ //#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders //#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h index 757c8084a0..81056407d8 100644 --- a/config/examples/STM32/STM32F4/Configuration.h +++ b/config/examples/STM32/STM32F4/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h index 12b25752db..66cca22bb8 100644 --- a/config/examples/Sanguinololu/Configuration.h +++ b/config/examples/Sanguinololu/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index e36cc24194..f42d766a83 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Sovol/SV-01/Configuration.h b/config/examples/Sovol/SV-01/Configuration.h index 16514b58ce..c5d4404e2f 100644 --- a/config/examples/Sovol/SV-01/Configuration.h +++ b/config/examples/Sovol/SV-01/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed //#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Sovol/SV-01/Configuration_adv.h b/config/examples/Sovol/SV-01/Configuration_adv.h index 470d760f1d..8dea0ee80e 100644 --- a/config/examples/Sovol/SV-01/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration.h b/config/examples/TPARA/AXEL_TPARA/Configuration.h index 5d8677fe00..f0abdb0e8b 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration.h @@ -349,8 +349,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -438,6 +440,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -657,6 +660,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h index 0964cc8eee..526cc4f1bb 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h index 092b9cfcfd..cde0d9028b 100644 --- a/config/examples/Tevo/Michelangelo/Configuration.h +++ b/config/examples/Tevo/Michelangelo/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index c91bcf59a8..cfdbffdce6 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Tevo/Nereus/Configuration.h b/config/examples/Tevo/Nereus/Configuration.h index c26ba66afc..86c6bdbb74 100644 --- a/config/examples/Tevo/Nereus/Configuration.h +++ b/config/examples/Tevo/Nereus/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index 51bd360e8b..51921d1208 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h index 5104f11a55..8598888bc6 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index e9cebe9efd..2a4cef76d3 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h index 0a0ac3eb4f..d4a1fe8e78 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index e4dd8a6fce..a4a74b71c2 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h index e2ae1eeec0..7b271719dc 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index e4dd8a6fce..a4a74b71c2 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h index 65d244ced1..c0cd6c1c96 100644 --- a/config/examples/TheBorg/Configuration.h +++ b/config/examples/TheBorg/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h index 013dc621f8..ef6f9a08d6 100644 --- a/config/examples/TheBorg/Configuration_adv.h +++ b/config/examples/TheBorg/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index 9eeabff0e6..9f04afca07 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -351,8 +351,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -445,6 +447,7 @@ #endif #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -676,6 +679,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index d0b67d2afb..96a950245f 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index 86db2e4ebc..10770a784e 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index 68d224dbee..5ba090f774 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 501 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index cd03e2d5a9..bbbf1f1f2f 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h index 527669c712..2ae7fe96c4 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Configuration.h @@ -331,8 +331,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -420,6 +422,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -643,6 +646,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index cba433af41..4a627d26fd 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index d2cd9016dc..7921eae51e 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Tronxy/X5SA/Configuration.h b/config/examples/Tronxy/X5SA/Configuration.h index 22fa4a0e40..221971e836 100644 --- a/config/examples/Tronxy/X5SA/Configuration.h +++ b/config/examples/Tronxy/X5SA/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index 251814394b..fec991ec91 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index 7bc4d47e33..b0e780a973 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -643,6 +646,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Two Trees/BlueR Plus/Configuration.h b/config/examples/Two Trees/BlueR Plus/Configuration.h index 082be5cc2a..b929607059 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration.h @@ -330,8 +330,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -419,6 +421,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -638,6 +641,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h index 4765d280e3..5244d5835f 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h index eb750dae20..ed9e8fae33 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h @@ -332,8 +332,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -421,6 +423,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -641,6 +644,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h index 4ccecd1e03..0aaf5d701e 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h index 16bd5048a9..0510aa8857 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h @@ -333,8 +333,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -422,6 +424,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -642,6 +645,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h index 4ccecd1e03..0aaf5d701e 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h index 629f305356..a91b1ecf9e 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h @@ -332,8 +332,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -421,6 +423,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -641,6 +644,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h index 4ccecd1e03..0aaf5d701e 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h index ac3b879662..bd2783ffe7 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h @@ -335,8 +335,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -424,6 +426,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -642,6 +645,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h index fbe2ca6c04..44c4eee606 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1501,6 +1543,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration.h b/config/examples/Two Trees/Sapphire Pro/Configuration.h index dd16887ac7..97575e295d 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration.h @@ -333,8 +333,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -422,6 +424,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -639,6 +642,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h index a508009999..aabf8f07c7 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index 89ee661ea7..4480f34b73 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index 5903d63be8..f2d9f127f5 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index 544241538b..0d0275e826 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index 2c4c4e6b8b..2f0b64cb4d 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index 03f8dade99..9fa67d246c 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index 2cf7b1fb5c..cfe20c5aee 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index 0120d7610e..5e104490b0 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -349,8 +349,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -438,6 +440,7 @@ #define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -657,6 +660,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index 2ae23363cf..dff3cc0cc5 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -122,6 +122,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -188,6 +194,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -261,6 +286,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -506,11 +545,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1508,6 +1550,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index 19bcbb1cb9..275e82afdd 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index 91a7104104..d6dd4a2d1c 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Velleman/K8400/Single-head/Configuration.h b/config/examples/Velleman/K8400/Single-head/Configuration.h index c668d7fc26..cd848f6f07 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index 91a7104104..d6dd4a2d1c 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index e048d35a7a..0cff125d48 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -342,8 +342,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -431,6 +433,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -650,6 +653,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index 31f68cf8e6..95404dc473 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration.h b/config/examples/Wanhao/Duplicator 4S/Configuration.h index 264d82a2bf..499b1d242d 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed //#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index a698b15002..3795cf45bb 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index 9867208c39..7fc0665975 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 5a9f33da36..3ef48501fa 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1497,6 +1539,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h index c6fd50fcd7..4b819c6afa 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 99 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index 3ee26e419e..3339a5e753 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h index 804f300303..152852bf92 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index 9bef6a4af8..7d79f96a59 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Weistek/wt150/Configuration.h b/config/examples/Weistek/wt150/Configuration.h index 71c775b626..5594b910e5 100644 --- a/config/examples/Weistek/wt150/Configuration.h +++ b/config/examples/Weistek/wt150/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index ef68a3544d..c75e4352f7 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Zonestar/P802M/Configuration.h b/config/examples/Zonestar/P802M/Configuration.h index c832b6418d..753954b99b 100644 --- a/config/examples/Zonestar/P802M/Configuration.h +++ b/config/examples/Zonestar/P802M/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 502 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index 714eb5740d..f0e44b0fb7 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h index dc1a76a668..f9cfa7ee7d 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h @@ -331,8 +331,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -420,6 +422,7 @@ #define TEMP_SENSOR_BED 11 // close match to Zonestar 57 may have to add their file #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -638,6 +641,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h index 5f76457453..a07922f8b6 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h index ce135b87e7..a064155f41 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h @@ -341,8 +341,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -434,6 +436,7 @@ #endif #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -664,6 +667,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index 7a3eb68f87..22e3d3358d 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -494,11 +533,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1498,6 +1540,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index 95656d2a5b..f0d11015b8 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -344,8 +344,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -437,6 +439,7 @@ #endif #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -665,6 +668,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index e5782a6820..b97cfbc1ab 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1497,6 +1539,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/delta/Anycubic/Predator/Configuration.h b/config/examples/delta/Anycubic/Predator/Configuration.h index 7fbcd46763..d5b0d24129 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration.h +++ b/config/examples/delta/Anycubic/Predator/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index f07c5c3851..d3c748c6a5 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1498,6 +1540,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h index 4a03b329c9..082bd3e569 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN //#define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN #define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index 54b505d60f..eec33b0709 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1497,6 +1539,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h index 2a903608fb..3caeb5e5fb 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN //#define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN #define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -648,6 +651,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index 138ee06e2b..1e1e6272d8 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1497,6 +1539,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h index f0b168a5bd..54329b52e6 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed //#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h index c32b856cd4..355db22a8b 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -635,6 +638,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration.h b/config/examples/delta/FLSUN/QQ-S/Configuration.h index 2e265792cb..affc410fed 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index 8e882ff0a8..6d35e01899 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1497,6 +1539,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h index 903ed053a9..659c4f2a0c 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -642,6 +645,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h index d03356964c..ff2163eefb 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1498,6 +1540,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling #define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap #define STATUS_FAN_FRAMES 4 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index 9624518ec6..65dfd82dd8 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 84fd823add..a468bacf41 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1497,6 +1539,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index d8034d080f..e7c9061204 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 84fd823add..a468bacf41 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1497,6 +1539,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index fc52691e82..c8d8e8c490 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 336c467e69..cc016856d1 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1497,6 +1539,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/delta/Geeetech/G2/Configuration.h b/config/examples/delta/Geeetech/G2/Configuration.h index 1443443572..d0daa478e4 100644 --- a/config/examples/delta/Geeetech/G2/Configuration.h +++ b/config/examples/delta/Geeetech/G2/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index 847b2d1a9c..1177d51364 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1497,6 +1539,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration.h b/config/examples/delta/Geeetech/G2Pro/Configuration.h index 673cc726a9..4c4747063e 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index c9d086a924..57976a75ee 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1497,6 +1539,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/delta/Geeetech/G2S/Configuration.h b/config/examples/delta/Geeetech/G2S/Configuration.h index 2906de60dc..99c2a57c42 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration.h +++ b/config/examples/delta/Geeetech/G2S/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index c9d086a924..57976a75ee 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1497,6 +1539,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration.h b/config/examples/delta/Geeetech/G2SPro/Configuration.h index 1b440aaac1..19307aff49 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index c9d086a924..57976a75ee 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1497,6 +1539,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index 55e8fd559d..e8883d73b7 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 23 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index 81db3ec80d..b69e28c61d 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1497,6 +1539,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index cfeee8c7f9..f6f9df2d90 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -334,8 +334,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -423,6 +425,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -641,6 +644,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index 041f3f68a8..84f2cf5ea5 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1497,6 +1539,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index 5c83f8c338..c4f3666cb5 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index df00f6b578..bc1bfdb658 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1497,6 +1539,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/delta/Malyan M300/Configuration.h b/config/examples/delta/Malyan M300/Configuration.h index c19dd12f85..11c35cd166 100644 --- a/config/examples/delta/Malyan M300/Configuration.h +++ b/config/examples/delta/Malyan M300/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 75 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index ab06132b2d..0ef065f0c2 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1497,6 +1539,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index 3b640f920f..9de7e810e8 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 21d18cca4c..1212ed1ded 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1497,6 +1539,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index dec1b35cee..8c689f2142 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index 336c467e69..cc016856d1 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1497,6 +1539,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/delta/kossel_clear/Configuration.h b/config/examples/delta/kossel_clear/Configuration.h index b27207917d..4d08fb1ec8 100644 --- a/config/examples/delta/kossel_clear/Configuration.h +++ b/config/examples/delta/kossel_clear/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index 3a4b56be13..b0df42f6c3 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1497,6 +1539,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index 2a1ea71cc9..aa5ce7fa17 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 11 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -636,6 +639,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index 4139e74a4d..c8fbfb4867 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -333,8 +333,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -422,6 +424,7 @@ #define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -641,6 +644,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index 8b5c53dbe2..ae496a1319 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -642,6 +645,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index ada4765acb..9ab40f317b 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1497,6 +1539,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h index 7837f2d904..2770669956 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/config/examples/gCreate/gMax1.5+/Configuration.h @@ -333,8 +333,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -424,6 +426,7 @@ // a Fortek SSR to do it. If you are using an unaltered gCreate machine, this needs // to be set to 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -643,6 +646,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index fcbee62625..ced25665bb 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index 50155ea82a..516bffae0d 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 12 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -639,6 +642,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index 2144b7d053..ccc4809d77 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index 4520a7afbf..b67a2647dd 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -329,8 +329,10 @@ #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN + #define AUTO_POWER_COOLER_FAN //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature + //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time. #endif @@ -418,6 +420,7 @@ #define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -637,6 +640,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index ba2af069b0..e0fe5e79ee 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_COOLER == 1000 + #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define COOLER_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_PROBE == 1000 #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -179,6 +185,25 @@ #endif #endif +// +// Laser Cooler options +// +#if TEMP_SENSOR_COOLER + #define COOLER_MINTEMP 8 // (°C) + #define COOLER_MAXTEMP 26 // (°C) + #define COOLER_DEFAULT_TEMP 16 // (°C) + #define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target + #define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay + #define COOLER_INVERTING false + #define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required. + #define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc. + #define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g. + #if ENABLED(COOLER_FAN) + #define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target + #define COOLER_FAN_FACTOR 25 // PWM increase per °C above target + #endif +#endif + /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -248,6 +273,20 @@ #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif +/** + * Thermal Protection parameters for the laser cooler. + */ +#if ENABLED(THERMAL_PROTECTION_COOLER) + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + + /** + * Laser cooling watch settings (M143/M193). + */ + #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds + #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius +#endif + #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. @@ -493,11 +532,14 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 +#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -1495,6 +1537,7 @@ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active + //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames