3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-11 16:57:56 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

⏪️ Revert proposed angular feed-rate

Browse source
This commit is contained in:
Scott Lahteine 2024-09-17 18:21:16 -05:00
parent d2c9ede82e
commit a261846306
750 changed files with 1896 additions and 6019 deletions
Download patch file Download diff file Expand all files Collapse all files

10
config/default/Configuration.h
View file

@ -1293,16 +1293,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 3000 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

9
config/default/Configuration_adv.h
View file

@ -1258,12 +1258,8 @@
#define DISABLE_IDLE_E // Shut down all idle extruders #define DISABLE_IDLE_E // Shut down all idle extruders
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s. °/s for rotational-only moves) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s. °/s for rotational-only moves) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/3DFabXYZ/Migbot/Configuration.h
View file

@ -1295,16 +1295,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 1590 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 1590 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1590 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 1590 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/3DMatik/XL/Configuration.h
View file

@ -1293,16 +1293,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 3000 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/3DMatik/XL/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/ADIMLab/Gantry v1/Configuration.h
View file

@ -1293,16 +1293,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 1000 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/ADIMLab/Gantry v1/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/ADIMLab/Gantry v2/Configuration.h
View file

@ -1293,16 +1293,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 3000 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/ADIMLab/Gantry v2/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/Alfawise/U20-bltouch/Configuration.h
View file

@ -1362,16 +1362,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 200 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 200 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 200 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 200 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/Alfawise/U20-bltouch/Configuration_adv.h
View file

@ -1269,10 +1269,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4036,7 +4032,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/Alfawise/U20/Configuration.h
View file

@ -1363,16 +1363,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 200 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 200 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 200 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 200 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/Alfawise/U20/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4027,7 +4023,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/AliExpress/CL-260/Configuration.h
View file

@ -1293,16 +1293,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 3000 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/AliExpress/CL-260/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/AliExpress/UM2pExt/Configuration.h
View file

@ -1294,16 +1294,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 3000 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/AliExpress/UM2pExt/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4028,7 +4024,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/Anet/A2/Configuration.h
View file

@ -1293,16 +1293,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 3000 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/Anet/A2/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/Anet/A2plus/Configuration.h
View file

@ -1293,16 +1293,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 3000 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/Anet/A2plus/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/Anet/A6/Configuration.h
View file

@ -1305,19 +1305,13 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
// ANET A6 Firmware V2.0 defaults: // ANET A6 Firmware V2.0 defaults:
// Accel: 1000 A-retract: 1000 // Accel: 1000 A-retract: 1000
#define DEFAULT_ACCELERATION 1000 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/Anet/A6/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/Anet/A8/Configuration.h
View file

@ -1296,16 +1296,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 400 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 400 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/Anet/A8/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/Anet/A8plus/Configuration.h
View file

@ -1295,16 +1295,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 400 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 400 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/Anet/A8plus/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/Anet/A9/Configuration.h
View file

@ -1293,16 +1293,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 3000 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/Anet/A9/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/Anet/E10/Configuration.h
View file

@ -1293,16 +1293,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 1000 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/Anet/E10/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/Anet/E16/BTT SKR 1.3/Configuration.h
View file

@ -1295,16 +1295,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 1000 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/Anet/E16/Stock/Configuration.h
View file

@ -1295,16 +1295,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 1000 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/Anet/E16/Stock/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/Anet/ET4+/Configuration.h
View file

@ -1299,16 +1299,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 800 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 800 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/Anet/ET4+/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/Anet/ET4-Pro/Configuration.h
View file

@ -1299,16 +1299,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 800 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 800 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/Anet/ET4-Pro/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/Anet/ET4/Configuration.h
View file

@ -1299,16 +1299,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 800 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 800 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/Anet/ET4/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/Anet/ET4X/Configuration.h
View file

@ -1299,16 +1299,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 800 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 800 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/Anet/ET4X/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/Anet/ET5-Pro/Configuration.h
View file

@ -1293,16 +1293,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 3000 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/Anet/ET5-Pro/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/Anet/ET5/Configuration.h
View file

@ -1293,16 +1293,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 3000 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/Anet/ET5/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/Anet/ET5X/Configuration.h
View file

@ -1293,16 +1293,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 3000 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/Anet/ET5X/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/AnyCubic/Chiron/Configuration.h
View file

@ -1296,16 +1296,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 350 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 350 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 350 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 350 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/AnyCubic/Chiron/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h
View file

@ -1294,16 +1294,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 500 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h
View file

@ -1294,16 +1294,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 500 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h
View file

@ -1293,16 +1293,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 500 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/AnyCubic/Vyper/Configuration.h
View file

@ -1293,16 +1293,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 900 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 900 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/AnyCubic/Vyper/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h
View file

@ -1338,16 +1338,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 1500 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 1500 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h
View file

@ -1300,16 +1300,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 1500 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 1500 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/AnyCubic/i3/Configuration.h
View file

@ -1293,16 +1293,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 1000 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/AnyCubic/i3/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/ArmEd/Configuration.h
View file

@ -1294,16 +1294,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 1000 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/ArmEd/Configuration_adv.h
View file

@ -1265,10 +1265,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4031,7 +4027,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/Artillery/Genius Pro/Configuration.h
View file

@ -1293,16 +1293,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 800 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 800 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 2000 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 2000 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/Artillery/Genius Pro/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/Artillery/Genius/BLTouch/Configuration.h
View file

@ -1293,16 +1293,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 800 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 800 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 2000 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 2000 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/Artillery/Genius/BLTouch/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/Artillery/Genius/V1/Configuration.h
View file

@ -1293,16 +1293,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 800 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 800 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 2000 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 2000 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/Artillery/Genius/V1/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/Artillery/Hornet/Configuration.h
View file

@ -1293,16 +1293,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 800 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 800 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 2000 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 2000 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/Artillery/Hornet/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h
View file

@ -1309,16 +1309,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 800 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 800 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 2000 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 2000 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/Artillery/Sidewinder X1/V1/Configuration.h
View file

@ -1293,16 +1293,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 800 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 800 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 2000 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 2000 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/Artillery/Sidewinder X2/Configuration.h
View file

@ -1293,16 +1293,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 800 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 800 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 2000 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 2000 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/Artillery/Sidewinder X2/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/Azteeg/X5GT/Configuration.h
View file

@ -1293,16 +1293,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 3000 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/Azteeg/X5GT/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/BIBO/TouchX/cyclops/Configuration.h
View file

@ -1293,16 +1293,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 1100 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 1100 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1100 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 1100 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1100 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 1100 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/BIBO/TouchX/default - BLTouch/Configuration.h
View file

@ -1294,16 +1294,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 1100 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 1100 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1100 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 1100 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1100 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 1100 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/BIBO/TouchX/default - BLTouch/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4026,7 +4022,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/BIBO/TouchX/default/Configuration.h
View file

@ -1293,16 +1293,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 1100 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 1100 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1100 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 1100 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1100 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 1100 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/BIBO/TouchX/default/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4023,7 +4019,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/BIQU/B1 SE Plus/Configuration.h
View file

@ -1291,16 +1291,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 500 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/BIQU/B1 SE Plus/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4027,7 +4023,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/BIQU/B1 SE/Configuration.h
View file

@ -1291,16 +1291,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 500 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/BIQU/B1 SE/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4027,7 +4023,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/BIQU/B1/Configuration.h
View file

@ -1300,16 +1300,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 500 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/BIQU/B1/Configuration_adv.h
View file

@ -1260,10 +1260,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4029,7 +4025,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/BIQU/BX/Configuration.h
View file

@ -1301,16 +1301,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 1000 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/BIQU/BX/Configuration_adv.h
View file

@ -1261,10 +1261,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4027,7 +4023,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

10
config/examples/BIQU/Hurakan/Configuration.h
View file

@ -1296,16 +1296,10 @@
* M204 P Acceleration * M204 P Acceleration
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
* M204 I Angular Acceleration
* M204 J Angular Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 3000 // X, Y, Z ... and E acceleration for printing moves #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z ... acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves
#if ENABLED(AXIS4_ROTATES)
#define DEFAULT_ANGULAR_ACCELERATION 3000 // I, J, K acceleration for rotational-only printing moves
#define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000 // I, J, K acceleration for rotational-only travel (non printing) moves
#endif
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)

5
config/examples/BIQU/Hurakan/Configuration_adv.h
View file

@ -1261,10 +1261,6 @@
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
#if HAS_ROTATIONAL_AXES
#define DEFAULT_ANGULAR_MINIMUMFEEDRATE 0.0 // (°/s) Minimum feedrate for rotational-only moves. Set with M205 P.
#define DEFAULT_ANGULAR_MINTRAVELFEEDRATE 0.0 // (°/s) Minimum travel feedrate for rotational-only moves. Set with M205 Q.
#endif
// Minimum time that a segment needs to take as the buffer gets emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
@ -4027,7 +4023,6 @@
#ifdef G0_FEEDRATE #ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif #endif
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
/** /**
* Startup commands * Startup commands

Some files were not shown because too many files have changed in this diff Show more