3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2026-01-17 05:15:38 -07:00
Code Issues Projects Releases Packages Wiki Activity Actions

📝 Index Rev03 => LumenPnP (#766)

Browse source
This commit is contained in:
Scott Lahteine 2022-06-30 21:57:12 -05:00
parent 9eab21e1ef
commit 57cd85a875
2 changed files with 7 additions and 7 deletions
Download patch file Download diff file Expand all files Collapse all files

8
config/examples/Index/REV_03/Configuration.h → config/examples/Opulo/Lumen_REV3/Configuration.h
View file

@ -98,7 +98,7 @@
// Choose the name from boards.h that matches your setup
#ifndef MOTHERBOARD
#define MOTHERBOARD BOARD_INDEX_REV03
#define MOTHERBOARD BOARD_OPULO_LUMEN_REV3
#endif
/**
@ -991,7 +991,7 @@
* Override with M92
* X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
*/
#define DEFAULT_AXIS_STEPS_PER_UNIT { 40, 40, 40, 4.44, 4.44, 40 }
#define DEFAULT_AXIS_STEPS_PER_UNIT { 1280, 1280, 40, 4.44, 4.44, 40 }
/**
* Default Max Feed Rate (mm/s)
@ -1436,7 +1436,7 @@
*/
//#define Z_IDLE_HEIGHT Z_HOME_POS
//#define Z_HOMING_HEIGHT 31.5 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
// Be sure to have this much clearance over your Z_MAX_POS to prevent grinding.
#define Z_AFTER_HOMING 31.5 // (mm) Height to move to after homing Z
@ -1763,7 +1763,7 @@
//#define LCD_BED_TRAMMING
#if ENABLED(LCD_BED_TRAMMING)
#define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets
#define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets
#define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points
#define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points
//#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner

6
config/examples/Index/REV_03/Configuration_adv.h → config/examples/Opulo/Lumen_REV3/Configuration_adv.h
View file

@ -2711,7 +2711,7 @@
#if AXIS_IS_TMC(X)
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing
#define X_MICROSTEPS 8 // 0..256
#define X_MICROSTEPS 256 // 0..256
#define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
@ -2731,7 +2731,7 @@
#if AXIS_IS_TMC(Y)
#define Y_CURRENT 800
#define Y_CURRENT_HOME Y_CURRENT
#define Y_MICROSTEPS 8
#define Y_MICROSTEPS 256
#define Y_RSENSE 0.11
#define Y_CHAIN_POS -1
//#define Y_INTERPOLATE true
@ -3843,7 +3843,7 @@
#define FASTER_GCODE_PARSER
#if ENABLED(FASTER_GCODE_PARSER)
#define GCODE_QUOTED_STRINGS // Support for quoted string parameters
#define GCODE_QUOTED_STRINGS // Support for quoted string parameters
#endif
// Support for MeatPack G-code compression (https://github.com/scottmudge/OctoPrint-MeatPack)