3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-12-24 00:18:33 -07:00
Code Issues Projects Releases Packages Wiki Activity Actions

🔧 Update settings sections
Some checks failed
Deploy / deploy (push) Has been cancelled
Details

Browse source 
MarlinFirmware/Marlin#28240
This commit is contained in:
Scott Lahteine 2025-12-20 22:58:49 -06:00
parent e7f0c47eef
commit 55912a6a7f
812 changed files with 6096 additions and 4467 deletions
Download patch file Download diff file Expand all files Collapse all files

13
config/default/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1870,15 +1872,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false
@ -1891,8 +1890,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2543,7 +2540,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/default/Configuration_adv.h
View file

@ -1526,6 +1526,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2355,7 +2358,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2612,13 +2615,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2650,6 +2655,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2856,7 +2863,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/3DFabXYZ/Migbot/Configuration.h
View file

@ -478,7 +478,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -663,6 +663,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1872,15 +1874,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR true
@ -1893,8 +1892,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2545,7 +2542,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/3DMatik/XL/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1870,15 +1872,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false
@ -1891,8 +1890,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2543,7 +2540,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/3DMatik/XL/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/ADIMLab/Gantry v1/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 1
@ -1870,15 +1872,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false
@ -1891,8 +1890,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2543,7 +2540,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/ADIMLab/Gantry v1/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/ADIMLab/Gantry v2/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1870,15 +1872,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR true
@ -1891,8 +1890,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2543,7 +2540,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/ADIMLab/Gantry v2/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/Alfawise/U20-bltouch/Configuration.h
View file

@ -532,7 +532,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -717,6 +717,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1939,15 +1941,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR true
@ -1960,8 +1959,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2622,7 +2619,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/Alfawise/U20-bltouch/Configuration_adv.h
View file

@ -1530,6 +1530,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2356,7 +2359,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2613,13 +2616,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2651,6 +2656,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2857,7 +2864,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/Alfawise/U20/Configuration.h
View file

@ -532,7 +532,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -717,6 +717,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1940,15 +1942,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR true
@ -1961,8 +1960,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2623,7 +2620,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/Alfawise/U20/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2347,7 +2350,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2604,13 +2607,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2642,6 +2647,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2848,7 +2855,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/AliExpress/CL-260/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1870,15 +1872,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false
@ -1891,8 +1890,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR true
#define INVERT_E1_DIR false
@ -2543,7 +2540,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/AliExpress/CL-260/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/AliExpress/UM2pExt/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1871,15 +1873,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR true
@ -1892,8 +1891,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR true
#define INVERT_E1_DIR true
@ -2544,7 +2541,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/AliExpress/UM2pExt/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/Anet/A2/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1870,15 +1872,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR true
@ -1891,8 +1890,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR true
#define INVERT_E1_DIR false
@ -2543,7 +2540,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/Anet/A2/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/Anet/A2plus/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1870,15 +1872,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR true
@ -1891,8 +1890,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR true
#define INVERT_E1_DIR false
@ -2543,7 +2540,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/Anet/A2plus/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/Anet/A6/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1907,15 +1909,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false
@ -1931,8 +1930,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2633,7 +2630,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/Anet/A6/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/Anet/A8/Configuration.h
View file

@ -478,7 +478,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -663,6 +663,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1873,15 +1875,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false
@ -1894,8 +1893,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2546,7 +2543,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/Anet/A8/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/Anet/A8plus/Configuration.h
View file

@ -478,7 +478,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -663,6 +663,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1872,15 +1874,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR true
@ -1893,8 +1892,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2545,7 +2542,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/Anet/A8plus/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/Anet/A9/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1870,15 +1872,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false
@ -1891,8 +1890,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR true
#define INVERT_E1_DIR false
@ -2543,7 +2540,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/Anet/A9/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/Anet/E10/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1870,15 +1872,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false
@ -1891,8 +1890,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR true
#define INVERT_E1_DIR true
@ -2543,7 +2540,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/Anet/E10/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/Anet/E16/BTT SKR 1.3/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1872,15 +1874,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false
@ -1893,8 +1892,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2545,7 +2542,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/Anet/E16/Stock/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1872,15 +1874,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false
@ -1893,8 +1892,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2545,7 +2542,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/Anet/E16/Stock/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/Anet/ET4+/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1876,15 +1878,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR true
@ -1897,8 +1896,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2549,7 +2546,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/Anet/ET4+/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/Anet/ET4-Pro/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1876,15 +1878,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR true
@ -1897,8 +1896,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2549,7 +2546,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/Anet/ET4-Pro/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/Anet/ET4/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1876,15 +1878,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR true
@ -1897,8 +1896,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2549,7 +2546,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/Anet/ET4/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/Anet/ET4X/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1876,15 +1878,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR true
@ -1897,8 +1896,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2549,7 +2546,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/Anet/ET4X/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/Anet/ET5-Pro/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1870,15 +1872,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR true
@ -1891,8 +1890,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2544,7 +2541,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/Anet/ET5-Pro/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/Anet/ET5/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1870,15 +1872,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR true
@ -1891,8 +1890,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2544,7 +2541,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/Anet/ET5/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/Anet/ET5X/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1870,15 +1872,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR true
@ -1891,8 +1890,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2544,7 +2541,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/Anet/ET5X/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/AnyCubic/Chiron/Configuration.h
View file

@ -481,7 +481,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -666,6 +666,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1874,15 +1876,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR true
@ -1895,8 +1894,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2547,7 +2544,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/AnyCubic/Chiron/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1871,15 +1873,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR true
@ -1892,8 +1891,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2544,7 +2541,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 10*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1871,15 +1873,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR true
@ -1892,8 +1891,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2544,7 +2541,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 10*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1870,15 +1872,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR true
@ -1891,8 +1890,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2543,7 +2540,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 10*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/AnyCubic/Vyper/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1870,15 +1872,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false
@ -1891,8 +1890,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR true
#define INVERT_E1_DIR false
@ -2543,7 +2540,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/AnyCubic/Vyper/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h
View file

@ -516,7 +516,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -701,6 +701,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1921,15 +1923,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#if ENABLED(I3MEGA_PRO_STOCK)
@ -1947,8 +1946,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2603,7 +2600,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h
View file

@ -487,7 +487,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -672,6 +672,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1883,15 +1885,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR true // set to true for stock drivers or TMC2208 with reversed connectors
@ -1904,8 +1903,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2559,7 +2556,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/AnyCubic/i3/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1870,15 +1872,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false
@ -1891,8 +1890,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2543,7 +2540,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/AnyCubic/i3/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/ArmEd/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1871,15 +1873,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false
@ -1892,8 +1891,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2544,7 +2541,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/ArmEd/Configuration_adv.h
View file

@ -1526,6 +1526,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2351,7 +2354,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2608,13 +2611,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2646,6 +2651,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2852,7 +2859,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/Artillery/Genius Pro/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1870,15 +1872,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false
@ -1891,8 +1890,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2543,7 +2540,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/Artillery/Genius Pro/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/Artillery/Genius/BLTouch/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1870,15 +1872,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false
@ -1891,8 +1890,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2543,7 +2540,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/Artillery/Genius/BLTouch/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/Artillery/Genius/V1/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1870,15 +1872,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false
@ -1891,8 +1890,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2543,7 +2540,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/Artillery/Genius/V1/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/Artillery/Hornet/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1870,15 +1872,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false
@ -1891,8 +1890,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR true
#define INVERT_E1_DIR false
@ -2543,7 +2540,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/Artillery/Hornet/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1886,15 +1888,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false
@ -1907,8 +1906,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR true
#define INVERT_E1_DIR false
@ -2559,7 +2556,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/Artillery/Sidewinder X1/V1/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1870,15 +1872,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false
@ -1891,8 +1890,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2543,7 +2540,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/Artillery/Sidewinder X2/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1870,15 +1872,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false
@ -1891,8 +1890,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2543,7 +2540,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/Artillery/Sidewinder X2/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/Azteeg/X5GT/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1870,15 +1872,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false
@ -1891,8 +1890,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR false
@ -2543,7 +2540,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/Azteeg/X5GT/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/BIBO/TouchX/cyclops/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1870,15 +1872,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
//#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR true
@ -1891,8 +1890,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR true
@ -2543,7 +2540,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/BIBO/TouchX/default - BLTouch/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1871,15 +1873,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
//#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false
@ -1892,8 +1891,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR true
@ -2544,7 +2541,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/BIBO/TouchX/default - BLTouch/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/BIBO/TouchX/default/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1870,15 +1872,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
//#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false
@ -1891,8 +1890,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR false
#define INVERT_E1_DIR true
@ -2543,7 +2540,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/BIBO/TouchX/default/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2343,7 +2346,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2600,13 +2603,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2638,6 +2643,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2844,7 +2851,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/BIQU/B1 SE Plus/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1868,15 +1870,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR true
@ -1889,8 +1888,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR true
#define INVERT_E1_DIR true
@ -2541,7 +2538,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/BIQU/B1 SE Plus/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/BIQU/B1 SE/Configuration.h
View file

@ -477,7 +477,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -662,6 +662,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1868,15 +1870,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR true
@ -1889,8 +1888,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR true
#define INVERT_E1_DIR true
@ -2541,7 +2538,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/BIQU/B1 SE/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2346,7 +2349,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2603,13 +2606,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2641,6 +2646,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2847,7 +2854,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/BIQU/B1/Configuration.h
View file

@ -484,7 +484,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -669,6 +669,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1881,15 +1883,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR true
@ -1902,8 +1901,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR true
#define INVERT_E1_DIR false
@ -2557,7 +2554,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/BIQU/B1/Configuration_adv.h
View file

@ -1521,6 +1521,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2348,7 +2351,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2605,13 +2608,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2643,6 +2648,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2849,7 +2856,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/BIQU/BX/all-metal-hotend/Configuration.h
View file

@ -493,7 +493,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -678,6 +678,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1892,15 +1894,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR true
@ -1913,8 +1912,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR true
#define INVERT_E1_DIR false
@ -2565,7 +2562,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/BIQU/BX/all-metal-hotend/Configuration_adv.h
View file

@ -1522,6 +1522,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2349,7 +2352,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2606,13 +2609,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2644,6 +2649,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2850,7 +2857,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

13
config/examples/BIQU/BX/base/Configuration.h
View file

@ -493,7 +493,7 @@
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
// @section temperature
// @section temperature sensors
/**
* Temperature Sensors:
@ -678,6 +678,8 @@
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif
// @section temperature
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -1892,15 +1894,12 @@
//#define DISABLE_V
//#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// @section stepper drivers
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR true
@ -1913,8 +1912,6 @@
//#define INVERT_V_DIR false
//#define INVERT_W_DIR false
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#define INVERT_E0_DIR true
#define INVERT_E1_DIR false
@ -2565,7 +2562,7 @@
//
//#define TEMPERATURE_UNITS_SUPPORT
// @section temperature
// @section temperature presets
//
// Preheat Constants - Up to 10 are supported without changes

13
config/examples/BIQU/BX/base/Configuration_adv.h
View file

@ -1522,6 +1522,9 @@
// @section lcd
// Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING
#if HAS_MANUAL_MOVE_MENU
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@ -2349,7 +2352,7 @@
//#define WATCHDOG_RESET_MANUAL
#endif
// @section lcd
// @section baby-stepping
/**
* Babystepping enables movement of the axes by tiny increments without changing
@ -2606,13 +2609,15 @@
#endif
#endif // PTC_PROBE || PTC_BED || PTC_HOTEND
// @section extras
// @section gcode
//
// G60/G61 Position Save and Return
//
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
// @section motion
//
// G2/G3 Arc Support
//
@ -2644,6 +2649,8 @@
*/
//#define DIRECT_STEPPING
// @section calibrate
/**
* G38 Probe Target
*
@ -2850,7 +2857,7 @@
*/
//#define EXTRA_FAN_SPEED
// @section gcode
// @section firmware retraction
/**
* Firmware-based and LCD-controlled retract

Some files were not shown because too many files have changed in this diff Show more