From 55912a6a7f1e8c7e3b47dd844e842a3203d4fdec Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sat, 20 Dec 2025 22:58:49 -0600 Subject: [PATCH] =?UTF-8?q?=F0=9F=94=A7=20Update=20settings=20sections?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit MarlinFirmware/Marlin#28240 --- config/default/Configuration.h | 13 +++++------- config/default/Configuration_adv.h | 13 +++++++++--- .../examples/3DFabXYZ/Migbot/Configuration.h | 13 +++++------- .../3DFabXYZ/Migbot/Configuration_adv.h | 13 +++++++++--- config/examples/3DMatik/XL/Configuration.h | 13 +++++------- .../examples/3DMatik/XL/Configuration_adv.h | 13 +++++++++--- .../ADIMLab/Gantry v1/Configuration.h | 13 +++++------- .../ADIMLab/Gantry v1/Configuration_adv.h | 13 +++++++++--- .../ADIMLab/Gantry v2/Configuration.h | 13 +++++------- .../ADIMLab/Gantry v2/Configuration_adv.h | 13 +++++++++--- .../Alfawise/U20-bltouch/Configuration.h | 13 +++++------- .../Alfawise/U20-bltouch/Configuration_adv.h | 13 +++++++++--- config/examples/Alfawise/U20/Configuration.h | 13 +++++------- .../examples/Alfawise/U20/Configuration_adv.h | 13 +++++++++--- .../AliExpress/CL-260/Configuration.h | 13 +++++------- .../AliExpress/CL-260/Configuration_adv.h | 13 +++++++++--- .../AliExpress/UM2pExt/Configuration.h | 13 +++++------- .../AliExpress/UM2pExt/Configuration_adv.h | 13 +++++++++--- config/examples/Anet/A2/Configuration.h | 13 +++++------- config/examples/Anet/A2/Configuration_adv.h | 13 +++++++++--- config/examples/Anet/A2plus/Configuration.h | 13 +++++------- .../examples/Anet/A2plus/Configuration_adv.h | 13 +++++++++--- config/examples/Anet/A6/Configuration.h | 13 +++++------- config/examples/Anet/A6/Configuration_adv.h | 13 +++++++++--- config/examples/Anet/A8/Configuration.h | 13 +++++------- config/examples/Anet/A8/Configuration_adv.h | 13 +++++++++--- config/examples/Anet/A8plus/Configuration.h | 13 +++++------- .../examples/Anet/A8plus/Configuration_adv.h | 13 +++++++++--- config/examples/Anet/A9/Configuration.h | 13 +++++------- config/examples/Anet/A9/Configuration_adv.h | 13 +++++++++--- config/examples/Anet/E10/Configuration.h | 13 +++++------- config/examples/Anet/E10/Configuration_adv.h | 13 +++++++++--- .../Anet/E16/BTT SKR 1.3/Configuration.h | 13 +++++------- .../Anet/E16/BTT SKR 1.3/Configuration_adv.h | 13 +++++++++--- .../examples/Anet/E16/Stock/Configuration.h | 13 +++++------- .../Anet/E16/Stock/Configuration_adv.h | 13 +++++++++--- config/examples/Anet/ET4+/Configuration.h | 13 +++++------- config/examples/Anet/ET4+/Configuration_adv.h | 13 +++++++++--- config/examples/Anet/ET4-Pro/Configuration.h | 13 +++++------- .../examples/Anet/ET4-Pro/Configuration_adv.h | 13 +++++++++--- config/examples/Anet/ET4/Configuration.h | 13 +++++------- config/examples/Anet/ET4/Configuration_adv.h | 13 +++++++++--- config/examples/Anet/ET4X/Configuration.h | 13 +++++------- config/examples/Anet/ET4X/Configuration_adv.h | 13 +++++++++--- config/examples/Anet/ET5-Pro/Configuration.h | 13 +++++------- .../examples/Anet/ET5-Pro/Configuration_adv.h | 13 +++++++++--- config/examples/Anet/ET5/Configuration.h | 13 +++++------- config/examples/Anet/ET5/Configuration_adv.h | 13 +++++++++--- config/examples/Anet/ET5X/Configuration.h | 13 +++++------- config/examples/Anet/ET5X/Configuration_adv.h | 13 +++++++++--- .../examples/AnyCubic/Chiron/Configuration.h | 13 +++++------- .../AnyCubic/Chiron/Configuration_adv.h | 13 +++++++++--- .../Mega Zero 2.0/Anycubic V1/Configuration.h | 13 +++++------- .../Anycubic V1/Configuration_adv.h | 13 +++++++++--- .../Mega Zero/Anycubic V1/Configuration.h | 13 +++++------- .../Mega Zero/Anycubic V1/Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../examples/AnyCubic/Vyper/Configuration.h | 13 +++++------- .../AnyCubic/Vyper/Configuration_adv.h | 13 +++++++++--- .../i3 Mega/Trigorilla AVR/Configuration.h | 13 +++++------- .../Trigorilla AVR/Configuration_adv.h | 13 +++++++++--- .../Trigorilla Pro STM32/Configuration.h | 13 +++++------- .../Trigorilla Pro STM32/Configuration_adv.h | 13 +++++++++--- config/examples/AnyCubic/i3/Configuration.h | 13 +++++------- .../examples/AnyCubic/i3/Configuration_adv.h | 13 +++++++++--- config/examples/ArmEd/Configuration.h | 13 +++++------- config/examples/ArmEd/Configuration_adv.h | 13 +++++++++--- .../Artillery/Genius Pro/Configuration.h | 13 +++++------- .../Artillery/Genius Pro/Configuration_adv.h | 13 +++++++++--- .../Artillery/Genius/BLTouch/Configuration.h | 13 +++++------- .../Genius/BLTouch/Configuration_adv.h | 13 +++++++++--- .../Artillery/Genius/V1/Configuration.h | 13 +++++------- .../Artillery/Genius/V1/Configuration_adv.h | 13 +++++++++--- .../examples/Artillery/Hornet/Configuration.h | 13 +++++------- .../Artillery/Hornet/Configuration_adv.h | 13 +++++++++--- .../0.9 BMG - E3D V6/Configuration.h | 13 +++++------- .../0.9 BMG - E3D V6/Configuration_adv.h | 13 +++++++++--- .../Sidewinder X1/V1/Configuration.h | 13 +++++------- .../Sidewinder X1/V1/Configuration_adv.h | 13 +++++++++--- .../Artillery/Sidewinder X2/Configuration.h | 13 +++++------- .../Sidewinder X2/Configuration_adv.h | 13 +++++++++--- config/examples/Azteeg/X5GT/Configuration.h | 13 +++++------- .../examples/Azteeg/X5GT/Configuration_adv.h | 13 +++++++++--- .../BIBO/TouchX/cyclops/Configuration.h | 13 +++++------- .../BIBO/TouchX/cyclops/Configuration_adv.h | 13 +++++++++--- .../TouchX/default - BLTouch/Configuration.h | 13 +++++------- .../default - BLTouch/Configuration_adv.h | 13 +++++++++--- .../BIBO/TouchX/default/Configuration.h | 13 +++++------- .../BIBO/TouchX/default/Configuration_adv.h | 13 +++++++++--- .../examples/BIQU/B1 SE Plus/Configuration.h | 13 +++++------- .../BIQU/B1 SE Plus/Configuration_adv.h | 13 +++++++++--- config/examples/BIQU/B1 SE/Configuration.h | 13 +++++------- .../examples/BIQU/B1 SE/Configuration_adv.h | 13 +++++++++--- config/examples/BIQU/B1/Configuration.h | 13 +++++------- config/examples/BIQU/B1/Configuration_adv.h | 13 +++++++++--- .../BIQU/BX/all-metal-hotend/Configuration.h | 13 +++++------- .../BX/all-metal-hotend/Configuration_adv.h | 13 +++++++++--- config/examples/BIQU/BX/base/Configuration.h | 13 +++++------- .../examples/BIQU/BX/base/Configuration_adv.h | 13 +++++++++--- config/examples/BIQU/Hurakan/Configuration.h | 13 +++++------- .../examples/BIQU/Hurakan/Configuration_adv.h | 13 +++++++++--- .../BIQU/Thunder Standard/Configuration.h | 13 +++++------- .../BIQU/Thunder Standard/Configuration_adv.h | 13 +++++++++--- config/examples/BQ/Hephestos/Configuration.h | 13 +++++------- .../examples/BQ/Hephestos/Configuration_adv.h | 13 +++++++++--- .../examples/BQ/Hephestos_2/Configuration.h | 13 +++++------- .../BQ/Hephestos_2/Configuration_adv.h | 13 +++++++++--- config/examples/BQ/WITBOX/Configuration.h | 13 +++++------- config/examples/BQ/WITBOX/Configuration_adv.h | 13 +++++++++--- config/examples/CNC/miniRambo/Configuration.h | 13 +++++------- .../CNC/miniRambo/Configuration_adv.h | 13 +++++++++--- config/examples/CTC/A13/Configuration.h | 13 +++++------- config/examples/CTC/A13/Configuration_adv.h | 13 +++++++++--- config/examples/CTC/Bizer/Configuration.h | 13 +++++------- config/examples/CTC/Bizer/Configuration_adv.h | 13 +++++++++--- .../i3 2560 Rev A/no probe/Configuration.h | 13 +++++------- .../no probe/Configuration_adv.h | 13 +++++++++--- config/examples/Cartesio/Configuration.h | 13 +++++------- config/examples/Cartesio/Configuration_adv.h | 13 +++++++++--- .../examples/Copymaster3D/300/Configuration.h | 13 +++++------- .../Copymaster3D/300/Configuration_adv.h | 13 +++++++++--- .../examples/Copymaster3D/400/Configuration.h | 13 +++++------- .../Copymaster3D/400/Configuration_adv.h | 13 +++++++++--- .../examples/Copymaster3D/500/Configuration.h | 13 +++++------- .../Copymaster3D/500/Configuration_adv.h | 13 +++++++++--- .../Creality/CR-10 Max/Configuration.h | 13 +++++------- .../Creality/CR-10 Max/Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../CR-10 Mini/CrealityV1/Configuration.h | 13 +++++------- .../CR-10 Mini/CrealityV1/Configuration_adv.h | 13 +++++++++--- .../CR-10 Mini/MEEB-3DP/Configuration.h | 13 +++++------- .../CR-10 Mini/MEEB-3DP/Configuration_adv.h | 13 +++++++++--- .../CR-10 S4/CrealityV1/Configuration.h | 13 +++++------- .../CR-10 S4/CrealityV1/Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../CR-10 S5/CrealityV1/Configuration.h | 13 +++++------- .../CR-10 S5/CrealityV1/Configuration_adv.h | 13 +++++++++--- .../CrealityV2.2 - BLTouch/Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../CrealityV427 - BLTouch/Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Creality/CR-10 V2/Configuration.h | 13 +++++------- .../Creality/CR-10 V2/Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Creality/CR-10 V3/Stock/Configuration.h | 13 +++++------- .../CR-10 V3/Stock/Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Creality/CR-10/CrealityV1/Configuration.h | 13 +++++------- .../CR-10/CrealityV1/Configuration_adv.h | 13 +++++++++--- .../Creality/CR-10S Pro/Configuration.h | 13 +++++------- .../Creality/CR-10S Pro/Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../BigTreeTech SKR Pro v1.2/Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../CrealityV1 - BLTouch/Configuration.h | 13 +++++------- .../CrealityV1 - BLTouch/Configuration_adv.h | 13 +++++++++--- .../CR-10S/CrealityV1/Configuration.h | 13 +++++------- .../CR-10S/CrealityV1/Configuration_adv.h | 13 +++++++++--- .../Creality/CR-20 Pro/Configuration.h | 13 +++++------- .../Creality/CR-20 Pro/Configuration_adv.h | 13 +++++++++--- .../RepRapWorld Minitronics20/Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Creality/CR-20/Stock/Configuration.h | 13 +++++------- .../Creality/CR-20/Stock/Configuration_adv.h | 13 +++++++++--- .../Creality/CR-30 PrintMill/Configuration.h | 13 +++++------- .../CR-30 PrintMill/Configuration_adv.h | 13 +++++++++--- .../examples/Creality/CR-6 SE/Configuration.h | 13 +++++------- .../Creality/CR-6 SE/Configuration_adv.h | 13 +++++++++--- config/examples/Creality/CR-8/Configuration.h | 13 +++++------- .../Creality/CR-8/Configuration_adv.h | 13 +++++++++--- .../Ender-2 Pro/CrealityV24S4/Configuration.h | 13 +++++------- .../CrealityV24S4/Configuration_adv.h | 13 +++++++++--- .../Ender-2 Pro/CrealityV423/Configuration.h | 13 +++++------- .../CrealityV423/Configuration_adv.h | 13 +++++++++--- .../examples/Creality/Ender-2/Configuration.h | 13 +++++------- .../Creality/Ender-2/Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../CrealityV422/Configuration.h | 13 +++++------- .../CrealityV422/Configuration_adv.h | 13 +++++++++--- .../Creality/Ender-3 Max/Configuration.h | 13 +++++------- .../Creality/Ender-3 Max/Configuration_adv.h | 13 +++++++++--- .../Creality/Ender-3 Neo/Configuration.h | 13 +++++------- .../Creality/Ender-3 Neo/Configuration_adv.h | 13 +++++++++--- .../BigTreeTech SKR 1.4 Turbo/Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../BLTouch/Configuration.h | 13 +++++------- .../BLTouch/Configuration_adv.h | 13 +++++++++--- .../base/Configuration.h | 13 +++++------- .../base/Configuration_adv.h | 13 +++++++++--- .../Creality free-runs/Configuration.h | 13 +++++------- .../Creality free-runs/Configuration_adv.h | 13 +++++++++--- .../Ender-3 Pro/CrealityV1/Configuration.h | 13 +++++------- .../CrealityV1/Configuration_adv.h | 13 +++++++++--- .../Ender-3 Pro/CrealityV422/Configuration.h | 13 +++++------- .../CrealityV422/Configuration_adv.h | 13 +++++++++--- .../CrealityV427/BLTouch/Configuration.h | 13 +++++------- .../CrealityV427/BLTouch/Configuration_adv.h | 13 +++++++++--- .../CrealityV427/base/Configuration.h | 13 +++++------- .../CrealityV427/base/Configuration_adv.h | 13 +++++++++--- .../Creality/Ender-3 S1 Plus/Configuration.h | 13 +++++------- .../Ender-3 S1 Plus/Configuration_adv.h | 13 +++++++++--- .../Creality/Ender-3 S1 Pro/Configuration.h | 13 +++++------- .../Ender-3 S1 Pro/Configuration_adv.h | 13 +++++++++--- .../Ender-3 S1/STM32F1/Configuration.h | 13 +++++------- .../Ender-3 S1/STM32F1/Configuration_adv.h | 13 +++++++++--- .../Ender-3 S1/STM32F4/Configuration.h | 13 +++++------- .../Ender-3 S1/STM32F4/Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../CrealityV422/Configuration.h | 13 +++++------- .../CrealityV422/Configuration_adv.h | 13 +++++++++--- .../CrealityUI/Configuration.h | 13 +++++------- .../CrealityUI/Configuration_adv.h | 13 +++++++++--- .../MarlinUI/Configuration.h | 13 +++++------- .../MarlinUI/Configuration_adv.h | 13 +++++++++--- .../CrealityUI/Configuration.h | 13 +++++------- .../CrealityUI/Configuration_adv.h | 13 +++++++++--- .../MarlinUI/Configuration.h | 13 +++++------- .../MarlinUI/Configuration_adv.h | 13 +++++++++--- .../CrealityUI/Configuration.h | 13 +++++------- .../CrealityUI/Configuration_adv.h | 13 +++++++++--- .../MarlinUI/Configuration.h | 13 +++++------- .../MarlinUI/Configuration_adv.h | 13 +++++++++--- .../CrealityV422/CrealityUI/Configuration.h | 13 +++++------- .../CrealityUI/Configuration_adv.h | 13 +++++++++--- .../CrealityV422/MarlinUI/Configuration.h | 13 +++++------- .../CrealityV422/MarlinUI/Configuration_adv.h | 13 +++++++++--- .../CrealityV427/CrealityUI/Configuration.h | 13 +++++------- .../CrealityUI/Configuration_adv.h | 13 +++++++++--- .../CrealityV427/MarlinUI/Configuration.h | 13 +++++------- .../CrealityV427/MarlinUI/Configuration_adv.h | 13 +++++++++--- .../BigTreeTech E3 RRF/Configuration.h | 13 +++++------- .../BigTreeTech E3 RRF/Configuration_adv.h | 13 +++++++++--- .../BigTreeTech Manta E3 EZ/Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../BigTreeTech SKR 1.4/Configuration.h | 13 +++++------- .../BigTreeTech SKR 1.4/Configuration_adv.h | 13 +++++++++--- .../2-into-1 Hotend/Configuration.h | 13 +++++------- .../2-into-1 Hotend/Configuration_adv.h | 13 +++++++++--- .../Dual Z/Configuration.h | 13 +++++------- .../Dual Z/Configuration_adv.h | 13 +++++++++--- .../Single Extruder/Configuration.h | 13 +++++------- .../Single Extruder/Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Creality free-runs/Configuration.h | 13 +++++------- .../Creality free-runs/Configuration_adv.h | 13 +++++++++--- .../Ender-3/CrealityV1/Configuration.h | 13 +++++------- .../Ender-3/CrealityV1/Configuration_adv.h | 13 +++++++++--- .../Ender-3/CrealityV422/Configuration.h | 13 +++++------- .../Ender-3/CrealityV422/Configuration_adv.h | 13 +++++++++--- .../Ender-3/CrealityV427/Configuration.h | 13 +++++------- .../Ender-3/CrealityV427/Configuration_adv.h | 13 +++++++++--- .../BLTouch/Configuration.h | 13 +++++------- .../BLTouch/Configuration_adv.h | 13 +++++++++--- .../FYSETC Cheetah 1.2/base/Configuration.h | 13 +++++------- .../base/Configuration_adv.h | 13 +++++++++--- .../FYSETC Cheetah 2.0/Configuration.h | 13 +++++------- .../FYSETC Cheetah 2.0/Configuration_adv.h | 13 +++++++++--- .../FYSETC Cheetah/BLTouch/Configuration.h | 13 +++++------- .../BLTouch/Configuration_adv.h | 13 +++++++++--- .../FYSETC Cheetah/base/Configuration.h | 13 +++++------- .../FYSETC Cheetah/base/Configuration_adv.h | 13 +++++++++--- .../Creality/Ender-3/MEEB-3DP/Configuration.h | 13 +++++------- .../Ender-3/MEEB-3DP/Configuration_adv.h | 13 +++++++++--- .../Ender-3/MKS Robin E3/V1.0/Configuration.h | 13 +++++------- .../MKS Robin E3/V1.0/Configuration_adv.h | 13 +++++++++--- .../Ender-3/MKS Robin E3/V1.1/Configuration.h | 13 +++++------- .../MKS Robin E3/V1.1/Configuration_adv.h | 13 +++++++++--- .../Ender-3/MKS Robin E3P/Configuration.h | 13 +++++------- .../Ender-3/MKS Robin E3P/Configuration_adv.h | 13 +++++++++--- .../TH3D EZBoard Lite V2/Configuration.h | 13 +++++------- .../TH3D EZBoard Lite V2/Configuration_adv.h | 13 +++++++++--- .../examples/Creality/Ender-4/Configuration.h | 13 +++++------- .../Creality/Ender-4/Configuration_adv.h | 13 +++++++++--- .../BigTreeTech SKR 3/Configuration.h | 13 +++++------- .../BigTreeTech SKR 3/Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../CrealityV1 (ORIGIN UI)/Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../CrealityV1 (RELOADED UI)/Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../BigTreeTech SKR E3 Turbo/Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Ender-5 Pro/CrealityV1/Configuration.h | 13 +++++------- .../CrealityV1/Configuration_adv.h | 13 +++++++++--- .../Ender-5 Pro/CrealityV422/Configuration.h | 13 +++++------- .../CrealityV422/Configuration_adv.h | 13 +++++++++--- .../Ender-5 Pro/CrealityV427/Configuration.h | 13 +++++------- .../CrealityV427/Configuration_adv.h | 13 +++++++++--- .../Creality/Ender-5 S1/Configuration.h | 13 +++++------- .../Creality/Ender-5 S1/Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../BigTreeTech SKR E3 Turbo/Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Creality free-runs/Configuration.h | 13 +++++------- .../Creality free-runs/Configuration_adv.h | 13 +++++++++--- .../Ender-5/CrealityV1/Configuration.h | 13 +++++------- .../Ender-5/CrealityV1/Configuration_adv.h | 13 +++++++++--- .../CrealityV427 with BLTouch/Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Ender-5/CrealityV427/Configuration.h | 13 +++++------- .../Ender-5/CrealityV427/Configuration_adv.h | 13 +++++++++--- .../examples/Creality/Ender-6/Configuration.h | 13 +++++------- .../Creality/Ender-6/Configuration_adv.h | 13 +++++++++--- .../Dagoma/Disco Ultimate/Configuration.h | 13 +++++------- .../Dagoma/Disco Ultimate/Configuration_adv.h | 13 +++++++++--- .../examples/Daycom/3DP-100/Configuration.h | 13 +++++------- .../Daycom/3DP-100/Configuration_adv.h | 13 +++++++++--- .../examples/E3D/BigBox Dual/Configuration.h | 13 +++++------- .../E3D/BigBox Dual/Configuration_adv.h | 13 +++++++++--- .../Imprimante multifonction/Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../EasyThreeD/ET4000PLUS/Configuration.h | 13 +++++------- .../EasyThreeD/ET4000PLUS/Configuration_adv.h | 13 +++++++++--- config/examples/Eazao/Zero/Configuration.h | 13 +++++------- .../examples/Eazao/Zero/Configuration_adv.h | 13 +++++++++--- config/examples/Einstart-S/Configuration.h | 13 +++++------- .../examples/Einstart-S/Configuration_adv.h | 13 +++++++++--- .../examples/Elegoo/Neptune 2/Configuration.h | 13 +++++------- .../Elegoo/Neptune 2/Configuration_adv.h | 13 +++++++++--- .../Eryone/Thinker SE/Configuration.h | 13 +++++------- .../Eryone/Thinker SE/Configuration_adv.h | 13 +++++++++--- .../Eryone/Thinker V2/Configuration.h | 13 +++++------- .../Eryone/Thinker V2/Configuration_adv.h | 13 +++++++++--- config/examples/FYSETC/AIO_II/Configuration.h | 13 +++++------- .../FYSETC/AIO_II/Configuration_adv.h | 13 +++++++++--- config/examples/FYSETC/F6_13/Configuration.h | 13 +++++------- .../examples/FYSETC/F6_13/Configuration_adv.h | 13 +++++++++--- config/examples/FYSETC/S6/Configuration.h | 13 +++++------- config/examples/FYSETC/S6/Configuration_adv.h | 13 +++++++++--- config/examples/Felix/DUAL/Configuration.h | 13 +++++------- .../examples/Felix/DUAL/Configuration_adv.h | 13 +++++++++--- config/examples/Felix/Single/Configuration.h | 13 +++++------- .../examples/Felix/Single/Configuration_adv.h | 13 +++++++++--- .../FlashForge/Creator 2X/Configuration.h | 13 +++++------- .../FlashForge/Creator 2X/Configuration_adv.h | 13 +++++++++--- .../FlashForge/CreatorPro/Configuration.h | 13 +++++------- .../FlashForge/CreatorPro/Configuration_adv.h | 13 +++++++++--- .../FlyingBearGhost_v3/Configuration.h | 13 +++++------- .../FlyingBearGhost_v3/Configuration_adv.h | 13 +++++++++--- .../examples/FlyingBear/P902/Configuration.h | 13 +++++------- .../FlyingBear/P902/Configuration_adv.h | 13 +++++++++--- .../examples/FlyingBear/P905H/Configuration.h | 13 +++++------- .../FlyingBear/P905H/Configuration_adv.h | 13 +++++++++--- .../FoamCutter/generic/Configuration.h | 13 +++++------- .../FoamCutter/generic/Configuration_adv.h | 13 +++++++++--- .../FoamCutter/rcKeith/Configuration.h | 13 +++++------- .../FoamCutter/rcKeith/Configuration_adv.h | 13 +++++++++--- .../FolgerTech/FT-5 R2/Configuration.h | 13 +++++------- .../FolgerTech/FT-5 R2/Configuration_adv.h | 13 +++++++++--- .../FolgerTech/i3-2020/Configuration.h | 13 +++++------- .../FolgerTech/i3-2020/Configuration_adv.h | 13 +++++++++--- .../examples/Formbot/Raptor/Configuration.h | 13 +++++------- .../Formbot/Raptor/Configuration_adv.h | 13 +++++++++--- config/examples/Geeetech/A10/Configuration.h | 13 +++++------- .../examples/Geeetech/A10/Configuration_adv.h | 13 +++++++++--- config/examples/Geeetech/A10D/Configuration.h | 13 +++++------- .../Geeetech/A10D/Configuration_adv.h | 13 +++++++++--- .../Geeetech/A10M/Stock LCD/Configuration.h | 13 +++++------- .../A10M/Stock LCD/Configuration_adv.h | 13 +++++++++--- .../A10M/YHCB2004_V4.1/Configuration.h | 13 +++++------- .../A10M/YHCB2004_V4.1/Configuration_adv.h | 13 +++++++++--- .../examples/Geeetech/A10PRO/Configuration.h | 13 +++++------- .../Geeetech/A10PRO/Configuration_adv.h | 13 +++++++++--- .../Geeetech/A10T/Stock LCD/Configuration.h | 13 +++++------- .../A10T/Stock LCD/Configuration_adv.h | 13 +++++++++--- .../A10T/YHCB2004_V4.1/Configuration.h | 13 +++++------- .../A10T/YHCB2004_V4.1/Configuration_adv.h | 13 +++++++++--- config/examples/Geeetech/A20/Configuration.h | 13 +++++------- .../examples/Geeetech/A20/Configuration_adv.h | 13 +++++++++--- config/examples/Geeetech/A20M/Configuration.h | 13 +++++------- .../Geeetech/A20M/Configuration_adv.h | 13 +++++++++--- config/examples/Geeetech/A20T/Configuration.h | 13 +++++------- .../Geeetech/A20T/Configuration_adv.h | 13 +++++++++--- config/examples/Geeetech/A30/Configuration.h | 13 +++++------- .../examples/Geeetech/A30/Configuration_adv.h | 13 +++++++++--- config/examples/Geeetech/A30M/Configuration.h | 13 +++++------- .../Geeetech/A30M/Configuration_adv.h | 13 +++++++++--- config/examples/Geeetech/A30T/Configuration.h | 13 +++++------- .../Geeetech/A30T/Configuration_adv.h | 13 +++++++++--- config/examples/Geeetech/D200/Configuration.h | 13 +++++------- .../Geeetech/D200/Configuration_adv.h | 13 +++++++++--- .../Geeetech/Duplicator5/Configuration.h | 13 +++++------- .../Geeetech/Duplicator5/Configuration_adv.h | 13 +++++++++--- config/examples/Geeetech/E180/Configuration.h | 13 +++++------- .../Geeetech/E180/Configuration_adv.h | 13 +++++++++--- .../examples/Geeetech/GT2560/Configuration.h | 13 +++++------- .../Geeetech/GT2560/Configuration_adv.h | 13 +++++++++--- .../Geeetech/I3_Pro_X-GT2560/Configuration.h | 13 +++++------- .../I3_Pro_X-GT2560/Configuration_adv.h | 13 +++++++++--- config/examples/Geeetech/M201/Configuration.h | 13 +++++------- .../Geeetech/M201/Configuration_adv.h | 13 +++++++++--- .../Geeetech/MeCreator2/Configuration.h | 13 +++++------- .../Geeetech/MeCreator2/Configuration_adv.h | 13 +++++++++--- .../Geeetech/Me_creator/Configuration.h | 13 +++++------- .../Geeetech/Me_creator/Configuration_adv.h | 13 +++++++++--- .../Geeetech/Me_ducer/Configuration.h | 13 +++++------- .../Geeetech/Me_ducer/Configuration_adv.h | 13 +++++++++--- .../Geeetech/PI3A PRO/Configuration.h | 13 +++++------- .../Geeetech/PI3A PRO/Configuration_adv.h | 13 +++++++++--- .../Prusa i3 Pro B/bltouch/Configuration.h | 13 +++++------- .../bltouch/Configuration_adv.h | 13 +++++++++--- .../Prusa i3 Pro B/noprobe/Configuration.h | 13 +++++------- .../noprobe/Configuration_adv.h | 13 +++++++++--- .../Geeetech/Prusa i3 Pro C/Configuration.h | 13 +++++------- .../Prusa i3 Pro C/Configuration_adv.h | 13 +++++++++--- .../Geeetech/Prusa i3 Pro W/Configuration.h | 13 +++++------- .../Prusa i3 Pro W/Configuration_adv.h | 13 +++++++++--- config/examples/HMS434/Configuration.h | 13 +++++------- config/examples/HMS434/Configuration_adv.h | 13 +++++++++--- config/examples/Hictop/3DP-17/Configuration.h | 13 +++++------- .../Hictop/3DP-17/Configuration_adv.h | 13 +++++++++--- .../examples/Infitary/i3-M508/Configuration.h | 13 +++++------- .../Infitary/i3-M508/Configuration_adv.h | 13 +++++++++--- .../Intamsys/FunmatHT 4988/Configuration.h | 13 +++++------- .../FunmatHT 4988/Configuration_adv.h | 13 +++++++++--- config/examples/JGAurora/A1/Configuration.h | 13 +++++------- .../examples/JGAurora/A1/Configuration_adv.h | 13 +++++++++--- config/examples/JGAurora/A3/Configuration.h | 13 +++++------- .../examples/JGAurora/A3/Configuration_adv.h | 13 +++++++++--- config/examples/JGAurora/A5/Configuration.h | 13 +++++------- .../examples/JGAurora/A5/Configuration_adv.h | 13 +++++++++--- config/examples/JGAurora/A5S/Configuration.h | 13 +++++------- .../examples/JGAurora/A5S/Configuration_adv.h | 13 +++++++++--- .../examples/JGAurora/Magic/Configuration.h | 13 +++++------- .../JGAurora/Magic/Configuration_adv.h | 13 +++++++++--- config/examples/Kingroon/KP3/Configuration.h | 13 +++++------- .../examples/Kingroon/KP3/Configuration_adv.h | 13 +++++++++--- config/examples/Kingroon/KP3S/Configuration.h | 13 +++++------- .../Kingroon/KP3S/Configuration_adv.h | 13 +++++++++--- .../Kingroon/KP3S_Pro/Configuration.h | 13 +++++------- .../Kingroon/KP3S_Pro/Configuration_adv.h | 13 +++++++++--- .../Kingroon/KP5L-DIY/Configuration.h | 13 +++++------- .../Kingroon/KP5L-DIY/Configuration_adv.h | 13 +++++++++--- config/examples/Labists/ET4/Configuration.h | 13 +++++------- .../examples/Labists/ET4/Configuration_adv.h | 13 +++++++++--- config/examples/Longer/LK5/Configuration.h | 13 +++++------- .../examples/Longer/LK5/Configuration_adv.h | 13 +++++++++--- config/examples/LulzBot/TAZ4/Configuration.h | 13 +++++------- .../examples/LulzBot/TAZ4/Configuration_adv.h | 13 +++++++++--- config/examples/MBot/Cube/Configuration.h | 13 +++++------- config/examples/MBot/Cube/Configuration_adv.h | 13 +++++++++--- config/examples/MZ3D/360/Configuration.h | 13 +++++------- config/examples/MZ3D/360/Configuration_adv.h | 13 +++++++++--- .../MakerBot/Replicator Dual/Configuration.h | 13 +++++------- .../Replicator Dual/Configuration_adv.h | 13 +++++++++--- .../Replicator Single/Configuration.h | 13 +++++------- .../Replicator Single/Configuration_adv.h | 13 +++++++++--- .../MakerFarm/Pegasus 12/Configuration.h | 13 +++++------- .../MakerFarm/Pegasus 12/Configuration_adv.h | 13 +++++++++--- .../MakerGear/M2 Rev H/Configuration.h | 13 +++++------- .../MakerGear/M2 Rev H/Configuration_adv.h | 13 +++++++++--- config/examples/MakerParts/Configuration.h | 13 +++++------- .../examples/MakerParts/Configuration_adv.h | 13 +++++++++--- .../Proforge2sDual/Configuration.h | 13 +++++------- .../Proforge2sDual/Configuration_adv.h | 13 +++++++++--- config/examples/Malyan/M150/Configuration.h | 13 +++++------- .../examples/Malyan/M150/Configuration_adv.h | 13 +++++++++--- config/examples/Malyan/M180/Configuration.h | 13 +++++------- .../examples/Malyan/M180/Configuration_adv.h | 13 +++++++++--- config/examples/Malyan/M200/Configuration.h | 13 +++++------- .../examples/Malyan/M200/Configuration_adv.h | 13 +++++++++--- config/examples/Materia101/Configuration.h | 13 +++++------- .../examples/Materia101/Configuration_adv.h | 13 +++++++++--- .../Micromake/C1/basic/Configuration.h | 13 +++++------- .../Micromake/C1/basic/Configuration_adv.h | 13 +++++++++--- .../Micromake/C1/enhanced/Configuration.h | 13 +++++------- .../Micromake/C1/enhanced/Configuration_adv.h | 13 +++++++++--- config/examples/Mks/Robin/Configuration.h | 13 +++++------- config/examples/Mks/Robin/Configuration_adv.h | 13 +++++++++--- .../examples/Mks/Robin_Lite3/Configuration.h | 13 +++++------- .../Mks/Robin_Lite3/Configuration_adv.h | 13 +++++++++--- config/examples/Mks/Robin_Pro/Configuration.h | 13 +++++------- .../Mks/Robin_Pro/Configuration_adv.h | 13 +++++++++--- config/examples/Mks/Sbase/Configuration.h | 13 +++++------- config/examples/Mks/Sbase/Configuration_adv.h | 13 +++++++++--- config/examples/Modix/Big60/Configuration.h | 13 +++++------- .../examples/Modix/Big60/Configuration_adv.h | 13 +++++++++--- config/examples/Nextion/Configuration.h | 13 +++++------- config/examples/Nextion/Configuration_adv.h | 13 +++++++++--- .../Hadron/Sanguinololu/Configuration.h | 13 +++++------- .../Hadron/Sanguinololu/Configuration_adv.h | 13 +++++++++--- .../examples/Opulo/Lumen_REV3/Configuration.h | 13 +++++------- .../Opulo/Lumen_REV3/Configuration_adv.h | 13 +++++++++--- .../examples/Opulo/Lumen_REV4/Configuration.h | 13 +++++------- .../Opulo/Lumen_REV4/Configuration_adv.h | 13 +++++++++--- .../examples/Opulo/Lumen_REV5/Configuration.h | 13 +++++------- .../Opulo/Lumen_REV5/Configuration_adv.h | 13 +++++++++--- config/examples/Ortur 4/Configuration.h | 13 +++++------- config/examples/Ortur 4/Configuration_adv.h | 13 +++++++++--- config/examples/Polargraph/Configuration.h | 13 +++++------- .../examples/Polargraph/Configuration_adv.h | 13 +++++++++--- .../Printrbot/PrintrboardG2/Configuration.h | 13 +++++------- .../PrintrboardG2/Configuration_adv.h | 13 +++++++++--- .../Simple Metal RevD/Configuration.h | 13 +++++------- .../Simple Metal RevD/Configuration_adv.h | 13 +++++++++--- .../Simple_Metal_RevF6/Configuration.h | 13 +++++------- .../Simple_Metal_RevF6/Configuration_adv.h | 13 +++++++++--- config/examples/Prusa/MK3/Configuration.h | 13 +++++------- config/examples/Prusa/MK3/Configuration_adv.h | 13 +++++++++--- .../MK3S-BigTreeTech-BTT002/Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- config/examples/Qidi/Qidi 1/Configuration.h | 13 +++++------- .../examples/Qidi/Qidi 1/Configuration_adv.h | 13 +++++++++--- config/examples/Raiscube/A8r/Configuration.h | 13 +++++------- .../examples/Raiscube/A8r/Configuration_adv.h | 13 +++++++++--- .../examples/RapideLite/RL200/Configuration.h | 13 +++++------- .../RapideLite/RL200/Configuration_adv.h | 13 +++++++++--- .../examples/Renkforce/RF100/Configuration.h | 13 +++++------- .../Renkforce/RF100/Configuration_adv.h | 13 +++++++++--- .../Renkforce/RF100XL/Configuration.h | 13 +++++------- .../Renkforce/RF100XL/Configuration_adv.h | 13 +++++++++--- .../Renkforce/RF100v2/Configuration.h | 13 +++++------- .../Renkforce/RF100v2/Configuration_adv.h | 13 +++++++++--- .../examples/RepRapPro/Huxley/Configuration.h | 13 +++++------- .../RepRapPro/Huxley/Configuration_adv.h | 13 +++++++++--- .../RepRapWorld/Megatronics/Configuration.h | 13 +++++------- .../Megatronics/Configuration_adv.h | 13 +++++++++--- .../RepRapWorld/Minitronics11/Configuration.h | 13 +++++------- .../Minitronics11/Configuration_adv.h | 13 +++++++++--- .../Minitronics20/CNC/Configuration.h | 13 +++++------- .../Minitronics20/CNC/Configuration_adv.h | 13 +++++++++--- config/examples/RigidBot/Configuration.h | 13 +++++------- config/examples/RigidBot/Configuration_adv.h | 13 +++++++++--- config/examples/Robo3D/R1+/Configuration.h | 13 +++++------- .../examples/Robo3D/R1+/Configuration_adv.h | 13 +++++++++--- .../Rolohaun/Rook MK1/Configuration.h | 13 +++++------- .../Rolohaun/Rook MK1/Configuration_adv.h | 13 +++++++++--- .../examples/SCARA/MP_SCARA/Configuration.h | 13 +++++------- .../SCARA/MP_SCARA/Configuration_adv.h | 13 +++++++++--- config/examples/SCARA/Morgan/Configuration.h | 13 +++++------- .../examples/SCARA/Morgan/Configuration_adv.h | 13 +++++++++--- .../STM32/Black_STM32F407VET6/Configuration.h | 13 +++++------- .../Black_STM32F407VET6/Configuration_adv.h | 13 +++++++++--- .../STM32/STM32F103RE/Configuration.h | 13 +++++------- .../STM32/STM32F103RE/Configuration_adv.h | 13 +++++++++--- config/examples/Simax/Mi-M200/Configuration.h | 13 +++++------- .../Simax/Mi-M200/Configuration_adv.h | 13 +++++++++--- config/examples/Simulator/Configuration.h | 13 +++++------- config/examples/Simulator/Configuration_adv.h | 13 +++++++++--- .../BigTreeTech SKR E3 Turbo/Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Sovol/SV-01/CrealityV22/Configuration.h | 13 +++++------- .../SV-01/CrealityV22/Configuration_adv.h | 13 +++++++++--- .../Sovol/SV-01/CrealityV221/Configuration.h | 13 +++++------- .../SV-01/CrealityV221/Configuration_adv.h | 13 +++++++++--- config/examples/Sovol/SV-02/Configuration.h | 13 +++++------- .../examples/Sovol/SV-02/Configuration_adv.h | 13 +++++++++--- config/examples/Sovol/SV-03/Configuration.h | 13 +++++------- .../examples/Sovol/SV-03/Configuration_adv.h | 13 +++++++++--- config/examples/Sovol/SV-05/Configuration.h | 13 +++++------- .../examples/Sovol/SV-05/Configuration_adv.h | 13 +++++++++--- .../examples/Sovol/SV-06 Plus/Configuration.h | 13 +++++------- .../Sovol/SV-06 Plus/Configuration_adv.h | 13 +++++++++--- config/examples/Sovol/SV-06/Configuration.h | 13 +++++------- .../examples/Sovol/SV-06/Configuration_adv.h | 13 +++++++++--- config/examples/Sunlu/S8/Configuration.h | 13 +++++------- config/examples/Sunlu/S8/Configuration_adv.h | 13 +++++++++--- config/examples/Sunlu/T3/Configuration.h | 13 +++++------- config/examples/Sunlu/T3/Configuration_adv.h | 13 +++++++++--- .../examples/TPARA/AXEL_TPARA/Configuration.h | 13 +++++------- .../TPARA/AXEL_TPARA/Configuration_adv.h | 13 +++++++++--- .../Tevo/Michelangelo/Configuration.h | 13 +++++------- .../Tevo/Michelangelo/Configuration_adv.h | 13 +++++++++--- config/examples/Tevo/Nereus/Configuration.h | 13 +++++------- .../examples/Tevo/Nereus/Configuration_adv.h | 13 +++++++++--- .../Tarantula Pro/MKS Gen_L/Configuration.h | 13 +++++------- .../MKS Gen_L/Configuration_adv.h | 13 +++++++++--- .../Tarantula Pro/MKS SGen_L/Configuration.h | 13 +++++------- .../MKS SGen_L/Configuration_adv.h | 13 +++++++++--- .../Tornado/V1 (MKS Base)/Configuration.h | 13 +++++------- .../Tornado/V1 (MKS Base)/Configuration_adv.h | 13 +++++++++--- .../Tornado/V2 (MKS Gen_L)/Configuration.h | 13 +++++------- .../V2 (MKS Gen_L)/Configuration_adv.h | 13 +++++++++--- .../Ditto Pro/RAMPS 1.4/Configuration.h | 13 +++++------- .../Ditto Pro/RAMPS 1.4/Configuration_adv.h | 13 +++++++++--- config/examples/TinyBoy2/Configuration.h | 13 +++++------- config/examples/TinyBoy2/Configuration_adv.h | 13 +++++++++--- .../D01/CXY-v6-191017 board/Configuration.h | 13 +++++------- .../CXY-v6-191017 board/Configuration_adv.h | 13 +++++++++--- config/examples/Tronxy/X1/Configuration.h | 13 +++++------- config/examples/Tronxy/X1/Configuration_adv.h | 13 +++++++++--- config/examples/Tronxy/X3A/Configuration.h | 13 +++++------- .../examples/Tronxy/X3A/Configuration_adv.h | 13 +++++++++--- .../Green Board (Chitu V5)/Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Red Board (Tronxy 3.1.0)/Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- config/examples/Tronxy/X5S/Configuration.h | 13 +++++------- .../examples/Tronxy/X5S/Configuration_adv.h | 13 +++++++++--- .../examples/Tronxy/X5SA Pro/Configuration.h | 13 +++++------- .../Tronxy/X5SA Pro/Configuration_adv.h | 13 +++++++++--- .../examples/Tronxy/X5SA-2E/Configuration.h | 13 +++++------- .../Tronxy/X5SA-2E/Configuration_adv.h | 20 +++++++++++++++---- config/examples/Tronxy/X5SA/Configuration.h | 13 +++++------- .../examples/Tronxy/X5SA/Configuration_adv.h | 13 +++++++++--- config/examples/Tronxy/XY100/Configuration.h | 13 +++++------- .../examples/Tronxy/XY100/Configuration_adv.h | 13 +++++++++--- .../examples/Tronxy/XY2-Pro/Configuration.h | 13 +++++------- .../Tronxy/XY2-Pro/Configuration_adv.h | 13 +++++++++--- .../Turnigy/Fabrikator/Configuration.h | 13 +++++------- .../Turnigy/Fabrikator/Configuration_adv.h | 13 +++++++++--- .../Two Trees/BlueR Plus/Configuration.h | 13 +++++------- .../Two Trees/BlueR Plus/Configuration_adv.h | 13 +++++++++--- .../Two Trees/BlueR/BlueR V1/Configuration.h | 13 +++++------- .../BlueR/BlueR V1/Configuration_adv.h | 13 +++++++++--- .../Two Trees/BlueR/BlueR V2/Configuration.h | 13 +++++------- .../BlueR/BlueR V2/Configuration_adv.h | 13 +++++++++--- .../Two Trees/BlueR/BlueR V3/Configuration.h | 13 +++++------- .../BlueR/BlueR V3/Configuration_adv.h | 13 +++++++++--- .../Two Trees/SP-5_V3/Configuration.h | 13 +++++------- .../Two Trees/SP-5_V3/Configuration_adv.h | 13 +++++++++--- .../Sapphire Plus V2.1/Configuration.h | 13 +++++------- .../Sapphire Plus V2.1/Configuration_adv.h | 13 +++++++++--- .../Sapphire Plus V2/Configuration.h | 13 +++++------- .../Sapphire Plus V2/Configuration_adv.h | 13 +++++++++--- .../Two Trees/Sapphire Pro/Configuration.h | 13 +++++------- .../Sapphire Pro/Configuration_adv.h | 13 +++++++++--- .../UltiMachine/Archim1/Configuration.h | 13 +++++------- .../UltiMachine/Archim1/Configuration_adv.h | 13 +++++++++--- .../UltiMachine/Archim2/Configuration.h | 13 +++++------- .../UltiMachine/Archim2/Configuration_adv.h | 13 +++++++++--- .../Ultimaker/Ultimaker 2+/Configuration.h | 13 +++++------- .../Ultimaker 2+/Configuration_adv.h | 13 +++++++++--- .../Ultimaker/Ultimaker 2/Configuration.h | 13 +++++------- .../Ultimaker/Ultimaker 2/Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- config/examples/VORONDesign/Configuration.h | 13 +++++------- .../examples/VORONDesign/Configuration_adv.h | 13 +++++++++--- .../Velleman/K8200 Upgraded/Configuration.h | 13 +++++------- .../K8200 Upgraded/Configuration_adv.h | 13 +++++++++--- .../examples/Velleman/K8200/Configuration.h | 13 +++++------- .../Velleman/K8200/Configuration_adv.h | 13 +++++++++--- .../Velleman/K8400/Dual-head/Configuration.h | 13 +++++------- .../K8400/Dual-head/Configuration_adv.h | 13 +++++++++--- .../K8400/Single-head/Configuration.h | 13 +++++------- .../K8400/Single-head/Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../examples/WASP/PowerWASP/Configuration.h | 13 +++++------- .../WASP/PowerWASP/Configuration_adv.h | 13 +++++++++--- .../Wanhao/Duplicator 4S/Configuration.h | 13 +++++------- .../Wanhao/Duplicator 4S/Configuration_adv.h | 13 +++++++++--- .../Wanhao/Duplicator 6/Configuration.h | 13 +++++------- .../Wanhao/Duplicator 6/Configuration_adv.h | 13 +++++++++--- .../Duplicator 9/MK1/300/Configuration.h | 13 +++++------- .../Duplicator 9/MK1/300/Configuration_adv.h | 13 +++++++++--- .../Duplicator 9/MK1/400/Configuration.h | 13 +++++------- .../Duplicator 9/MK1/400/Configuration_adv.h | 13 +++++++++--- .../Duplicator 9/MK1/500/Configuration.h | 13 +++++------- .../Duplicator 9/MK1/500/Configuration_adv.h | 13 +++++++++--- .../Duplicator 9/MK1u2/300/Configuration.h | 13 +++++------- .../MK1u2/300/Configuration_adv.h | 13 +++++++++--- .../Duplicator 9/MK1u2/400/Configuration.h | 13 +++++------- .../MK1u2/400/Configuration_adv.h | 13 +++++++++--- .../Duplicator 9/MK1u2/500/Configuration.h | 13 +++++------- .../MK1u2/500/Configuration_adv.h | 13 +++++++++--- .../Duplicator 9/MK2/300/Configuration.h | 13 +++++------- .../Duplicator 9/MK2/300/Configuration_adv.h | 13 +++++++++--- .../Duplicator 9/MK2/400/Configuration.h | 13 +++++------- .../Duplicator 9/MK2/400/Configuration_adv.h | 13 +++++++++--- .../Duplicator 9/MK2/500/Configuration.h | 13 +++++------- .../Duplicator 9/MK2/500/Configuration_adv.h | 13 +++++++++--- .../Duplicator 9/MK3/300/Configuration.h | 13 +++++------- .../Duplicator 9/MK3/300/Configuration_adv.h | 13 +++++++++--- .../Duplicator 9/MK3/400/Configuration.h | 13 +++++------- .../Duplicator 9/MK3/400/Configuration_adv.h | 13 +++++++++--- .../Duplicator 9/MK3/500/Configuration.h | 13 +++++------- .../Duplicator 9/MK3/500/Configuration_adv.h | 13 +++++++++--- .../Wanhao/Duplicator i3 2.1/Configuration.h | 13 +++++------- .../Duplicator i3 2.1/Configuration_adv.h | 13 +++++++++--- .../Wanhao/Duplicator i3 Mini/Configuration.h | 13 +++++------- .../Duplicator i3 Mini/Configuration_adv.h | 13 +++++++++--- .../Wanhao/Duplicator i3 Plus/Configuration.h | 13 +++++------- .../Duplicator i3 Plus/Configuration_adv.h | 13 +++++++++--- .../examples/Weedo/Tina2/V2/Configuration.h | 13 +++++------- .../Weedo/Tina2/V2/Configuration_adv.h | 13 +++++++++--- .../examples/Weedo/Tina2/V3/Configuration.h | 13 +++++------- .../Weedo/Tina2/V3/Configuration_adv.h | 13 +++++++++--- config/examples/Weistek/wt150/Configuration.h | 13 +++++------- .../Weistek/wt150/Configuration_adv.h | 13 +++++++++--- .../examples/Zonestar/P802M/Configuration.h | 13 +++++------- .../Zonestar/P802M/Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Configuration.h | 13 +++++------- .../Configuration_adv.h | 13 +++++++++--- .../Kossel Linear Plus/Configuration.h | 13 +++++------- .../Kossel Linear Plus/Configuration_adv.h | 13 +++++++++--- .../delta/Anycubic/Kossel/Configuration.h | 13 +++++------- .../delta/Anycubic/Kossel/Configuration_adv.h | 13 +++++++++--- .../delta/Anycubic/Predator/Configuration.h | 13 +++++------- .../Anycubic/Predator/Configuration_adv.h | 13 +++++++++--- .../delta/Dreammaker/Overlord/Configuration.h | 13 +++++------- .../Dreammaker/Overlord/Configuration_adv.h | 13 +++++++++--- .../Dreammaker/Overlord_Pro/Configuration.h | 13 +++++------- .../Overlord_Pro/Configuration_adv.h | 13 +++++++++--- .../delta/FLSUN/Q5-nano_v1/Configuration.h | 13 +++++------- .../FLSUN/Q5-nano_v1/Configuration_adv.h | 13 +++++++++--- .../delta/FLSUN/Q5-nano_v2/Configuration.h | 13 +++++------- .../FLSUN/Q5-nano_v2/Configuration_adv.h | 13 +++++++++--- .../examples/delta/FLSUN/QQ-S/Configuration.h | 13 +++++------- .../delta/FLSUN/QQ-S/Configuration_adv.h | 13 +++++++++--- .../delta/FLSUN/QQS-Pro/Configuration.h | 13 +++++------- .../delta/FLSUN/QQS-Pro/Configuration_adv.h | 13 +++++++++--- .../FLSUN/auto_calibrate/Configuration.h | 13 +++++------- .../FLSUN/auto_calibrate/Configuration_adv.h | 13 +++++++++--- .../delta/FLSUN/kossel/Configuration.h | 13 +++++------- .../delta/FLSUN/kossel/Configuration_adv.h | 13 +++++++++--- .../delta/FLSUN/kossel_mini/Configuration.h | 13 +++++------- .../FLSUN/kossel_mini/Configuration_adv.h | 13 +++++++++--- .../delta/Geeetech/G2/Configuration.h | 13 +++++------- .../delta/Geeetech/G2/Configuration_adv.h | 13 +++++++++--- .../delta/Geeetech/G2Pro/Configuration.h | 13 +++++------- .../delta/Geeetech/G2Pro/Configuration_adv.h | 13 +++++++++--- .../delta/Geeetech/G2S/Configuration.h | 13 +++++------- .../delta/Geeetech/G2S/Configuration_adv.h | 13 +++++++++--- .../delta/Geeetech/G2SPro/Configuration.h | 13 +++++------- .../delta/Geeetech/G2SPro/Configuration_adv.h | 13 +++++++++--- .../Geeetech/Rostock 301/Configuration.h | 13 +++++------- .../Geeetech/Rostock 301/Configuration_adv.h | 13 +++++++++--- .../delta/Hatchbox_Alpha/Configuration.h | 13 +++++------- .../delta/Hatchbox_Alpha/Configuration_adv.h | 13 +++++++++--- .../examples/delta/MKS/SBASE/Configuration.h | 13 +++++------- .../delta/MKS/SBASE/Configuration_adv.h | 13 +++++++++--- .../delta/Malyan M300/Configuration.h | 13 +++++------- .../delta/Malyan M300/Configuration_adv.h | 13 +++++++++--- .../MKS-Gen-L-V2.1/Configuration.h | 13 +++++------- .../MKS-Gen-L-V2.1/Configuration_adv.h | 13 +++++++++--- .../Micromake-D1/RAMPS-1.4/Configuration.h | 13 +++++------- .../RAMPS-1.4/Configuration_adv.h | 13 +++++++++--- .../delta/Tevo Little Monster/Configuration.h | 13 +++++------- .../Tevo Little Monster/Configuration_adv.h | 13 +++++++++--- .../delta/Velleman/K8800/Configuration.h | 13 +++++------- .../delta/Velleman/K8800/Configuration_adv.h | 13 +++++++++--- config/examples/delta/generic/Configuration.h | 13 +++++------- .../delta/generic/Configuration_adv.h | 13 +++++++++--- .../delta/kossel_clear/Configuration.h | 13 +++++------- .../delta/kossel_clear/Configuration_adv.h | 13 +++++++++--- .../delta/kossel_mini/Configuration.h | 13 +++++------- .../delta/kossel_mini/Configuration_adv.h | 13 +++++++++--- .../examples/delta/kossel_pro/Configuration.h | 13 +++++------- .../delta/kossel_pro/Configuration_adv.h | 13 +++++++++--- .../examples/delta/kossel_xl/Configuration.h | 13 +++++------- .../delta/kossel_xl/Configuration_adv.h | 13 +++++++++--- .../examples/gCreate/gMax1.5+/Configuration.h | 13 +++++------- .../gCreate/gMax1.5+/Configuration_adv.h | 13 +++++++++--- .../Octopus 8 LINEAR_AXES/Configuration.h | 13 +++++------- .../Octopus 8 LINEAR_AXES/Configuration_adv.h | 13 +++++++++--- .../RAMPS 5 LINEAR_AXES/Configuration.h | 13 +++++------- .../RAMPS 5 LINEAR_AXES/Configuration_adv.h | 13 +++++++++--- config/examples/makibox/Configuration.h | 13 +++++------- config/examples/makibox/Configuration_adv.h | 13 +++++++++--- config/examples/tvrrug/Round2/Configuration.h | 13 +++++------- .../tvrrug/Round2/Configuration_adv.h | 13 +++++++++--- 812 files changed, 6096 insertions(+), 4467 deletions(-) diff --git a/config/default/Configuration.h b/config/default/Configuration.h index 13e6b01609..6b978aac56 100644 --- a/config/default/Configuration.h +++ b/config/default/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index 935d8672f3..5863c4b794 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -1526,6 +1526,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2355,7 +2358,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2612,13 +2615,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2650,6 +2655,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2856,7 +2863,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index 6ed8cd99d2..af7a849a59 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -478,7 +478,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -663,6 +663,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1872,15 +1874,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1893,8 +1892,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2545,7 +2542,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 0ab59627e5..bca4bcc871 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/3DMatik/XL/Configuration.h b/config/examples/3DMatik/XL/Configuration.h index ac005f2daa..325d725399 100644 --- a/config/examples/3DMatik/XL/Configuration.h +++ b/config/examples/3DMatik/XL/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/3DMatik/XL/Configuration_adv.h b/config/examples/3DMatik/XL/Configuration_adv.h index 5152d509bf..dd93e455ae 100644 --- a/config/examples/3DMatik/XL/Configuration_adv.h +++ b/config/examples/3DMatik/XL/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h index 683e08d5fc..9ccf83029a 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 1 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index 2e9ddcd2fe..acf1842a5d 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h index ffee1c2fa0..f8d1970394 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index f7aa9e2d2c..640f499dde 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h index b0b5397079..2dc12bb934 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration.h @@ -532,7 +532,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -717,6 +717,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1939,15 +1941,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1960,8 +1959,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2622,7 +2619,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index 28ccb17b83..bbd9ed7b03 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -1530,6 +1530,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2356,7 +2359,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2613,13 +2616,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2651,6 +2656,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2857,7 +2864,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h index c343530a96..b9aea53c5a 100644 --- a/config/examples/Alfawise/U20/Configuration.h +++ b/config/examples/Alfawise/U20/Configuration.h @@ -532,7 +532,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -717,6 +717,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1940,15 +1942,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1961,8 +1960,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2623,7 +2620,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index bf2c8e6d57..c663b12784 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index 35dda456c2..d10eb7fe55 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/AliExpress/CL-260/Configuration_adv.h b/config/examples/AliExpress/CL-260/Configuration_adv.h index c4ee2c2ffe..7a6ea2834a 100644 --- a/config/examples/AliExpress/CL-260/Configuration_adv.h +++ b/config/examples/AliExpress/CL-260/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index 1a57588b63..15ffc12839 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index f457a0cb5b..f9f9dcc430 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index 2d73bb5324..fda939b4cc 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index c7426b787d..12b478c79d 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index 1b032858dd..e8c4542a2e 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index c7426b787d..12b478c79d 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index 4bbc69bc91..08bd35f180 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1907,15 +1909,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1931,8 +1930,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2633,7 +2630,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index 3c69a0fb77..25356d0657 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index 5c9c9ff084..1593265e3e 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -478,7 +478,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -663,6 +663,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1873,15 +1875,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1894,8 +1893,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2546,7 +2543,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index 6d84c5e790..776e1cafd7 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h index b657fb4836..6478ffefd9 100644 --- a/config/examples/Anet/A8plus/Configuration.h +++ b/config/examples/Anet/A8plus/Configuration.h @@ -478,7 +478,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -663,6 +663,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1872,15 +1874,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1893,8 +1892,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2545,7 +2542,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index a12340d7ee..2d8218e691 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Anet/A9/Configuration.h b/config/examples/Anet/A9/Configuration.h index 7c523375e4..b035a98841 100644 --- a/config/examples/Anet/A9/Configuration.h +++ b/config/examples/Anet/A9/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h index 2048dd20f9..5932d4fbb0 100644 --- a/config/examples/Anet/A9/Configuration_adv.h +++ b/config/examples/Anet/A9/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Anet/E10/Configuration.h b/config/examples/Anet/E10/Configuration.h index 9cb375795e..9347338078 100644 --- a/config/examples/Anet/E10/Configuration.h +++ b/config/examples/Anet/E10/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index 5a7c838858..c16118f6c0 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h index bb216dae48..cd07b8bf55 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1872,15 +1874,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1893,8 +1892,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2545,7 +2542,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h index 87a97289ad..9d74fc83ed 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Anet/E16/Stock/Configuration.h b/config/examples/Anet/E16/Stock/Configuration.h index c0da181ef1..0b9379dede 100644 --- a/config/examples/Anet/E16/Stock/Configuration.h +++ b/config/examples/Anet/E16/Stock/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1872,15 +1874,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1893,8 +1892,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2545,7 +2542,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h index 39e55f72e9..3020f36bdd 100644 --- a/config/examples/Anet/E16/Stock/Configuration_adv.h +++ b/config/examples/Anet/E16/Stock/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Anet/ET4+/Configuration.h b/config/examples/Anet/ET4+/Configuration.h index 4fb82d170d..c30d07c923 100644 --- a/config/examples/Anet/ET4+/Configuration.h +++ b/config/examples/Anet/ET4+/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1876,15 +1878,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1897,8 +1896,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2549,7 +2546,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h index c43d6ede8d..7301935b85 100644 --- a/config/examples/Anet/ET4+/Configuration_adv.h +++ b/config/examples/Anet/ET4+/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Anet/ET4-Pro/Configuration.h b/config/examples/Anet/ET4-Pro/Configuration.h index ef693d43d2..1d73aa6bc7 100644 --- a/config/examples/Anet/ET4-Pro/Configuration.h +++ b/config/examples/Anet/ET4-Pro/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1876,15 +1878,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1897,8 +1896,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2549,7 +2546,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h index c43d6ede8d..7301935b85 100644 --- a/config/examples/Anet/ET4-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET4-Pro/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Anet/ET4/Configuration.h b/config/examples/Anet/ET4/Configuration.h index 4f2cf09fba..ad70cf9980 100644 --- a/config/examples/Anet/ET4/Configuration.h +++ b/config/examples/Anet/ET4/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1876,15 +1878,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1897,8 +1896,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2549,7 +2546,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h index c43d6ede8d..7301935b85 100644 --- a/config/examples/Anet/ET4/Configuration_adv.h +++ b/config/examples/Anet/ET4/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Anet/ET4X/Configuration.h b/config/examples/Anet/ET4X/Configuration.h index f3d71daa77..7867439ef5 100644 --- a/config/examples/Anet/ET4X/Configuration.h +++ b/config/examples/Anet/ET4X/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1876,15 +1878,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1897,8 +1896,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2549,7 +2546,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h index c43d6ede8d..7301935b85 100644 --- a/config/examples/Anet/ET4X/Configuration_adv.h +++ b/config/examples/Anet/ET4X/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Anet/ET5-Pro/Configuration.h b/config/examples/Anet/ET5-Pro/Configuration.h index 41024e4a1e..7f600c1821 100644 --- a/config/examples/Anet/ET5-Pro/Configuration.h +++ b/config/examples/Anet/ET5-Pro/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h index 40846f26fa..3110d68cb6 100644 --- a/config/examples/Anet/ET5-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET5-Pro/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Anet/ET5/Configuration.h b/config/examples/Anet/ET5/Configuration.h index a9d3843cd2..cb8ba45e17 100644 --- a/config/examples/Anet/ET5/Configuration.h +++ b/config/examples/Anet/ET5/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h index 40846f26fa..3110d68cb6 100644 --- a/config/examples/Anet/ET5/Configuration_adv.h +++ b/config/examples/Anet/ET5/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Anet/ET5X/Configuration.h b/config/examples/Anet/ET5X/Configuration.h index e456bb0880..5e40a9bd4a 100644 --- a/config/examples/Anet/ET5X/Configuration.h +++ b/config/examples/Anet/ET5X/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h index 40846f26fa..3110d68cb6 100644 --- a/config/examples/Anet/ET5X/Configuration_adv.h +++ b/config/examples/Anet/ET5X/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/AnyCubic/Chiron/Configuration.h b/config/examples/AnyCubic/Chiron/Configuration.h index a74b3fcf49..45885ae159 100644 --- a/config/examples/AnyCubic/Chiron/Configuration.h +++ b/config/examples/AnyCubic/Chiron/Configuration.h @@ -481,7 +481,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -666,6 +666,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1874,15 +1876,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1895,8 +1894,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2547,7 +2544,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h index 8e995d8d08..92dda36f59 100644 --- a/config/examples/AnyCubic/Chiron/Configuration_adv.h +++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h index bb22175c95..394e0d17b0 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h index 9a8a94d575..77c6bd1f9d 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 10*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h index 55ecff3fdf..f715a8ea61 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h index d76df4c95e..62fef2f1d3 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 10*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h index 18ca2fab73..ca81548311 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h index 2cf798902c..f862df3935 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 10*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/AnyCubic/Vyper/Configuration.h b/config/examples/AnyCubic/Vyper/Configuration.h index d16af4428d..1fded6aee2 100644 --- a/config/examples/AnyCubic/Vyper/Configuration.h +++ b/config/examples/AnyCubic/Vyper/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/AnyCubic/Vyper/Configuration_adv.h b/config/examples/AnyCubic/Vyper/Configuration_adv.h index 730f41ba40..41a25a03d0 100644 --- a/config/examples/AnyCubic/Vyper/Configuration_adv.h +++ b/config/examples/AnyCubic/Vyper/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h index 602b03ac66..ff8082c1cc 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h @@ -516,7 +516,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -701,6 +701,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1921,15 +1923,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #if ENABLED(I3MEGA_PRO_STOCK) @@ -1947,8 +1946,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2603,7 +2600,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h index a841aab57f..380c604bd9 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h index 6940ba2e4e..696ec2afaa 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h @@ -487,7 +487,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -672,6 +672,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1883,15 +1885,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true // set to true for stock drivers or TMC2208 with reversed connectors @@ -1904,8 +1903,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2559,7 +2556,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h index e6428a0b21..3e2579339f 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index 5d3b3ac8c6..7908bb722f 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index a684c47cf0..7dcf05acc3 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index 0d8085d717..cedf3196d7 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 498ec35e74..7f7d53b71d 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -1526,6 +1526,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2351,7 +2354,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2608,13 +2611,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2646,6 +2651,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2852,7 +2859,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Artillery/Genius Pro/Configuration.h b/config/examples/Artillery/Genius Pro/Configuration.h index 714ded2d00..67df26e077 100644 --- a/config/examples/Artillery/Genius Pro/Configuration.h +++ b/config/examples/Artillery/Genius Pro/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Artillery/Genius Pro/Configuration_adv.h b/config/examples/Artillery/Genius Pro/Configuration_adv.h index 705bf796ad..c2b1adf4d1 100644 --- a/config/examples/Artillery/Genius Pro/Configuration_adv.h +++ b/config/examples/Artillery/Genius Pro/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration.h b/config/examples/Artillery/Genius/BLTouch/Configuration.h index 258b2dda0e..02dfae55b6 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h index 109d375008..016120282d 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Artillery/Genius/V1/Configuration.h b/config/examples/Artillery/Genius/V1/Configuration.h index 23e7876fba..151b7cb909 100644 --- a/config/examples/Artillery/Genius/V1/Configuration.h +++ b/config/examples/Artillery/Genius/V1/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Artillery/Genius/V1/Configuration_adv.h b/config/examples/Artillery/Genius/V1/Configuration_adv.h index 067e957185..de03b1b476 100644 --- a/config/examples/Artillery/Genius/V1/Configuration_adv.h +++ b/config/examples/Artillery/Genius/V1/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Artillery/Hornet/Configuration.h b/config/examples/Artillery/Hornet/Configuration.h index efcd633177..c0533e22e0 100644 --- a/config/examples/Artillery/Hornet/Configuration.h +++ b/config/examples/Artillery/Hornet/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Artillery/Hornet/Configuration_adv.h b/config/examples/Artillery/Hornet/Configuration_adv.h index 3bf851340f..ba6efc5e33 100644 --- a/config/examples/Artillery/Hornet/Configuration_adv.h +++ b/config/examples/Artillery/Hornet/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h index 684ea4025c..6f302a4016 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1886,15 +1888,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1907,8 +1906,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2559,7 +2556,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h index 03b831e753..9b3bea4a90 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h index 80a224b218..743a6c059b 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h index 067e957185..de03b1b476 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Artillery/Sidewinder X2/Configuration.h b/config/examples/Artillery/Sidewinder X2/Configuration.h index 7614bc4a9a..64a4223bc3 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h index 1a64af31fb..97c3a1d476 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index cfece57aeb..3c67c270d8 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Azteeg/X5GT/Configuration_adv.h b/config/examples/Azteeg/X5GT/Configuration_adv.h index c4ee2c2ffe..7a6ea2834a 100644 --- a/config/examples/Azteeg/X5GT/Configuration_adv.h +++ b/config/examples/Azteeg/X5GT/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index 63c14844a3..4603e71dc6 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR true @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 02990d9a3e..4eb57f5917 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/BIBO/TouchX/default - BLTouch/Configuration.h b/config/examples/BIBO/TouchX/default - BLTouch/Configuration.h index 02941ac41f..633ee12a25 100644 --- a/config/examples/BIBO/TouchX/default - BLTouch/Configuration.h +++ b/config/examples/BIBO/TouchX/default - BLTouch/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR true @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/BIBO/TouchX/default - BLTouch/Configuration_adv.h b/config/examples/BIBO/TouchX/default - BLTouch/Configuration_adv.h index 78dd7fa4e0..bbf7fa18f9 100644 --- a/config/examples/BIBO/TouchX/default - BLTouch/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default - BLTouch/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index cf08edf3b8..0d4eab8732 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR true @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 494ac4da7d..3827749e4e 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2343,7 +2346,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2600,13 +2603,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2638,6 +2643,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2844,7 +2851,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/BIQU/B1 SE Plus/Configuration.h b/config/examples/BIQU/B1 SE Plus/Configuration.h index 545441eada..b8a81c350f 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1868,15 +1870,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1889,8 +1888,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2541,7 +2538,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h index cd5a74bbde..4c2254d208 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/BIQU/B1 SE/Configuration.h b/config/examples/BIQU/B1 SE/Configuration.h index e30ceb071b..92f616c1f3 100644 --- a/config/examples/BIQU/B1 SE/Configuration.h +++ b/config/examples/BIQU/B1 SE/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1868,15 +1870,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1889,8 +1888,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2541,7 +2538,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/BIQU/B1 SE/Configuration_adv.h b/config/examples/BIQU/B1 SE/Configuration_adv.h index be878a67a1..47f1e3f071 100644 --- a/config/examples/BIQU/B1 SE/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/BIQU/B1/Configuration.h b/config/examples/BIQU/B1/Configuration.h index 14945b7641..be885d4aa8 100644 --- a/config/examples/BIQU/B1/Configuration.h +++ b/config/examples/BIQU/B1/Configuration.h @@ -484,7 +484,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -669,6 +669,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1881,15 +1883,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1902,8 +1901,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2557,7 +2554,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/BIQU/B1/Configuration_adv.h b/config/examples/BIQU/B1/Configuration_adv.h index 9d710f03d8..f1e3e5a969 100644 --- a/config/examples/BIQU/B1/Configuration_adv.h +++ b/config/examples/BIQU/B1/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2348,7 +2351,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2605,13 +2608,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2643,6 +2648,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2849,7 +2856,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/BIQU/BX/all-metal-hotend/Configuration.h b/config/examples/BIQU/BX/all-metal-hotend/Configuration.h index befa30a998..bcdc3cb626 100644 --- a/config/examples/BIQU/BX/all-metal-hotend/Configuration.h +++ b/config/examples/BIQU/BX/all-metal-hotend/Configuration.h @@ -493,7 +493,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -678,6 +678,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1892,15 +1894,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1913,8 +1912,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2565,7 +2562,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/BIQU/BX/all-metal-hotend/Configuration_adv.h b/config/examples/BIQU/BX/all-metal-hotend/Configuration_adv.h index 9d22ce1700..36d16257d6 100644 --- a/config/examples/BIQU/BX/all-metal-hotend/Configuration_adv.h +++ b/config/examples/BIQU/BX/all-metal-hotend/Configuration_adv.h @@ -1522,6 +1522,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2349,7 +2352,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2606,13 +2609,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2644,6 +2649,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2850,7 +2857,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/BIQU/BX/base/Configuration.h b/config/examples/BIQU/BX/base/Configuration.h index 0e9fb138cc..2004447484 100644 --- a/config/examples/BIQU/BX/base/Configuration.h +++ b/config/examples/BIQU/BX/base/Configuration.h @@ -493,7 +493,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -678,6 +678,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1892,15 +1894,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1913,8 +1912,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2565,7 +2562,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/BIQU/BX/base/Configuration_adv.h b/config/examples/BIQU/BX/base/Configuration_adv.h index 93d6cdce11..2150f5d6e5 100644 --- a/config/examples/BIQU/BX/base/Configuration_adv.h +++ b/config/examples/BIQU/BX/base/Configuration_adv.h @@ -1522,6 +1522,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2349,7 +2352,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2606,13 +2609,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2644,6 +2649,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2850,7 +2857,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/BIQU/Hurakan/Configuration.h b/config/examples/BIQU/Hurakan/Configuration.h index 8f79e43e77..d7bf8e918f 100644 --- a/config/examples/BIQU/Hurakan/Configuration.h +++ b/config/examples/BIQU/Hurakan/Configuration.h @@ -480,7 +480,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -665,6 +665,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1873,15 +1875,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1894,8 +1893,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2546,7 +2543,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/BIQU/Hurakan/Configuration_adv.h b/config/examples/BIQU/Hurakan/Configuration_adv.h index a7a85b1f4e..999942757b 100644 --- a/config/examples/BIQU/Hurakan/Configuration_adv.h +++ b/config/examples/BIQU/Hurakan/Configuration_adv.h @@ -1522,6 +1522,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/BIQU/Thunder Standard/Configuration.h b/config/examples/BIQU/Thunder Standard/Configuration.h index b95668eff1..a46d00b078 100644 --- a/config/examples/BIQU/Thunder Standard/Configuration.h +++ b/config/examples/BIQU/Thunder Standard/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/BIQU/Thunder Standard/Configuration_adv.h b/config/examples/BIQU/Thunder Standard/Configuration_adv.h index 2f0f2a3466..c121e69d36 100644 --- a/config/examples/BIQU/Thunder Standard/Configuration_adv.h +++ b/config/examples/BIQU/Thunder Standard/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index a1bf9d5049..1c03d6a572 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index 48f190fe68..b9c6a23065 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 120*60, 120*60, 18*60, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index a13c724c19..5a26cb564e 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -485,7 +485,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -670,6 +670,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1884,15 +1886,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1905,8 +1904,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2557,7 +2554,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index da129d2e4a..861fe698a9 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -1529,6 +1529,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2354,7 +2357,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2611,13 +2614,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2649,6 +2654,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2855,7 +2862,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index cb30bf1332..88abce5c61 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index 48f190fe68..b9c6a23065 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 120*60, 120*60, 18*60, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/CNC/miniRambo/Configuration.h b/config/examples/CNC/miniRambo/Configuration.h index bd8d6b6b2c..9835eae19b 100644 --- a/config/examples/CNC/miniRambo/Configuration.h +++ b/config/examples/CNC/miniRambo/Configuration.h @@ -478,7 +478,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -663,6 +663,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/CNC/miniRambo/Configuration_adv.h b/config/examples/CNC/miniRambo/Configuration_adv.h index 1e6c6393d2..b87cd9f570 100644 --- a/config/examples/CNC/miniRambo/Configuration_adv.h +++ b/config/examples/CNC/miniRambo/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/CTC/A13/Configuration.h b/config/examples/CTC/A13/Configuration.h index 62cefed456..83a553c9c2 100644 --- a/config/examples/CTC/A13/Configuration.h +++ b/config/examples/CTC/A13/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2545,7 +2542,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/CTC/A13/Configuration_adv.h b/config/examples/CTC/A13/Configuration_adv.h index 75ca2741f0..c62a9cd5b6 100644 --- a/config/examples/CTC/A13/Configuration_adv.h +++ b/config/examples/CTC/A13/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/CTC/Bizer/Configuration.h b/config/examples/CTC/Bizer/Configuration.h index 4b77a36fac..4b7220f297 100644 --- a/config/examples/CTC/Bizer/Configuration.h +++ b/config/examples/CTC/Bizer/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/CTC/Bizer/Configuration_adv.h b/config/examples/CTC/Bizer/Configuration_adv.h index 20e809f605..28455a14db 100644 --- a/config/examples/CTC/Bizer/Configuration_adv.h +++ b/config/examples/CTC/Bizer/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h index 9469b86534..12bb321797 100644 --- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h +++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h index c4ee2c2ffe..7a6ea2834a 100644 --- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h +++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index fccafbf1a3..187dd4ebda 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -478,7 +478,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -663,6 +663,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1886,15 +1888,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1907,8 +1906,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2559,7 +2556,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index c9a50f90af..a2902499e4 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Copymaster3D/300/Configuration.h b/config/examples/Copymaster3D/300/Configuration.h index c38615cef4..7a33d06916 100644 --- a/config/examples/Copymaster3D/300/Configuration.h +++ b/config/examples/Copymaster3D/300/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Copymaster3D/300/Configuration_adv.h b/config/examples/Copymaster3D/300/Configuration_adv.h index c4ee2c2ffe..7a6ea2834a 100644 --- a/config/examples/Copymaster3D/300/Configuration_adv.h +++ b/config/examples/Copymaster3D/300/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Copymaster3D/400/Configuration.h b/config/examples/Copymaster3D/400/Configuration.h index 543b6cbad3..661c2b0f5a 100644 --- a/config/examples/Copymaster3D/400/Configuration.h +++ b/config/examples/Copymaster3D/400/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Copymaster3D/400/Configuration_adv.h b/config/examples/Copymaster3D/400/Configuration_adv.h index c4ee2c2ffe..7a6ea2834a 100644 --- a/config/examples/Copymaster3D/400/Configuration_adv.h +++ b/config/examples/Copymaster3D/400/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Copymaster3D/500/Configuration.h b/config/examples/Copymaster3D/500/Configuration.h index 6cac803295..540942d522 100644 --- a/config/examples/Copymaster3D/500/Configuration.h +++ b/config/examples/Copymaster3D/500/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Copymaster3D/500/Configuration_adv.h b/config/examples/Copymaster3D/500/Configuration_adv.h index c4ee2c2ffe..7a6ea2834a 100644 --- a/config/examples/Copymaster3D/500/Configuration_adv.h +++ b/config/examples/Copymaster3D/500/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/CR-10 Max/Configuration.h b/config/examples/Creality/CR-10 Max/Configuration.h index 308eba4462..c6d045eed7 100644 --- a/config/examples/Creality/CR-10 Max/Configuration.h +++ b/config/examples/Creality/CR-10 Max/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR true @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/CR-10 Max/Configuration_adv.h b/config/examples/Creality/CR-10 Max/Configuration_adv.h index 8c8d5facf7..0e63211f29 100644 --- a/config/examples/Creality/CR-10 Max/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Max/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h index 087c79dc56..213446ac16 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -486,7 +486,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -671,6 +671,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1878,15 +1880,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1899,8 +1898,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2551,7 +2548,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index b58a851175..c9191e2285 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration.h index 691546f7fd..5b3dbca564 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -486,7 +486,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -671,6 +671,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1878,15 +1880,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1899,8 +1898,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2551,7 +2548,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index ecf65117a6..d140c2210c 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h index fb8e8f6e23..061c08adfe 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h @@ -486,7 +486,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -671,6 +671,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1879,15 +1881,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1900,8 +1899,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2552,7 +2549,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h index 22b126e9cc..94f7071c45 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h index 39e6a24009..23f1ce598f 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h index 231d240759..b500157f01 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h @@ -1520,6 +1520,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2345,7 +2348,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2602,13 +2605,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // #define SAVED_POSITIONS 12 +// @section motion + // // G2/G3 Arc Support // @@ -2640,6 +2645,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2846,7 +2853,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h index 8ade9ef272..33d73501ec 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false // Stock Creality CR-10 5S //#define INVERT_E0_DIR true // Creality with Bondtech extruder @@ -2545,7 +2542,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h index 8bd82c8afe..53885f8306 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h index 849a5e04eb..84d19a1e55 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true // Stock Creality CR-10 5S //#define INVERT_E0_DIR true // Creality with Bondtech extruder @@ -2545,7 +2542,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h index 1625784e91..12997c5fcf 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h index 30ad67352c..291355c026 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 0 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. //#define INVERT_E0_DIR false #define INVERT_E0_DIR true // Bondtech extruder @@ -2545,7 +2542,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h index 16ecdc776f..f78a57ff77 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h index 2e5a353549..389f654a58 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false // Stock Creality CR-10 5S //#define INVERT_E0_DIR true // Creality with Bondtech extruder @@ -2545,7 +2542,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h index 8bd82c8afe..53885f8306 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration.h index 363451f485..450c37781c 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1872,15 +1874,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1893,8 +1892,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false // Stock Creality CR-10 5S //#define INVERT_E0_DIR true // Creality with Bondtech extruder @@ -2546,7 +2543,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration_adv.h index deac3f6260..efea6096fc 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration.h index 0cf2c9659f..bb3ca8fcbf 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1872,15 +1874,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1893,8 +1892,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false // Stock Creality CR-10 5S //#define INVERT_E0_DIR true // Creality with Bondtech extruder @@ -2547,7 +2544,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration_adv.h index 91fccd9f5c..876fef8f44 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2849,7 +2856,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/CR-10 V2/Configuration.h b/config/examples/Creality/CR-10 V2/Configuration.h index a7fd58608c..61b8358dd9 100644 --- a/config/examples/Creality/CR-10 V2/Configuration.h +++ b/config/examples/Creality/CR-10 V2/Configuration.h @@ -484,7 +484,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -669,6 +669,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1890,15 +1892,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1911,8 +1910,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2571,7 +2568,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index 28558aa963..0acc83c0e8 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2608,13 +2611,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2646,6 +2651,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2852,7 +2859,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/CR-10 V3/BigTreeTech SKR Mini E3 v3/Configuration.h b/config/examples/Creality/CR-10 V3/BigTreeTech SKR Mini E3 v3/Configuration.h index 3c427d5864..ac904cb207 100644 --- a/config/examples/Creality/CR-10 V3/BigTreeTech SKR Mini E3 v3/Configuration.h +++ b/config/examples/Creality/CR-10 V3/BigTreeTech SKR Mini E3 v3/Configuration.h @@ -484,7 +484,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -669,6 +669,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1892,15 +1894,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1913,8 +1912,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. // Updated INVERT_E0_DIR for CR-10 V3 Direct Drive #define INVERT_E0_DIR false @@ -2576,7 +2573,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/CR-10 V3/BigTreeTech SKR Mini E3 v3/Configuration_adv.h b/config/examples/Creality/CR-10 V3/BigTreeTech SKR Mini E3 v3/Configuration_adv.h index bbc980abd7..95fd5837e2 100644 --- a/config/examples/Creality/CR-10 V3/BigTreeTech SKR Mini E3 v3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V3/BigTreeTech SKR Mini E3 v3/Configuration_adv.h @@ -1523,6 +1523,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2348,7 +2351,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2610,13 +2613,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2648,6 +2653,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2854,7 +2861,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/CR-10 V3/Stock/Configuration.h b/config/examples/Creality/CR-10 V3/Stock/Configuration.h index c5e3ec0647..72be0562aa 100644 --- a/config/examples/Creality/CR-10 V3/Stock/Configuration.h +++ b/config/examples/Creality/CR-10 V3/Stock/Configuration.h @@ -484,7 +484,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -669,6 +669,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1892,15 +1894,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1913,8 +1912,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. // Updated INVERT_E0_DIR for CR-10 V3 Direct Drive #define INVERT_E0_DIR true @@ -2576,7 +2573,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/CR-10 V3/Stock/Configuration_adv.h b/config/examples/Creality/CR-10 V3/Stock/Configuration_adv.h index 6fca6e8fe9..1b8718d384 100644 --- a/config/examples/Creality/CR-10 V3/Stock/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V3/Stock/Configuration_adv.h @@ -1523,6 +1523,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2348,7 +2351,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2610,13 +2613,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2648,6 +2653,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2854,7 +2861,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h index 08b5385f94..a8c44a9790 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1869,15 +1871,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1890,8 +1889,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2542,7 +2539,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 34c81e1b51..a7bb7b0d88 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h index c9f41e7636..83dc836d0d 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1869,15 +1871,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1890,8 +1889,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2542,7 +2539,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 4c71ef0d91..b9c45c1b89 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration.h b/config/examples/Creality/CR-10/CrealityV1/Configuration.h index 945eeb0981..3f6a46be05 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h index c747925f15..11c2091397 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/CR-10S Pro/Configuration.h b/config/examples/Creality/CR-10S Pro/Configuration.h index 92a8857ba7..2015c66e50 100644 --- a/config/examples/Creality/CR-10S Pro/Configuration.h +++ b/config/examples/Creality/CR-10S Pro/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/CR-10S Pro/Configuration_adv.h b/config/examples/Creality/CR-10S Pro/Configuration_adv.h index c862ee6c4b..725bcb1327 100644 --- a/config/examples/Creality/CR-10S Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-10S Pro/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h index 583d1de641..7a4f79d389 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h index f3bd7fdde6..617b54e9e9 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h index 4a2e8fe28e..8bab8650f1 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h index fd8f97f7d7..db823b2d58 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h index b64c8aa3a2..13df4ba4b8 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 34c81e1b51..a7bb7b0d88 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration.h index aa4a87a21b..3af4fe5d57 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index a7a9be75c4..94ad4d66b6 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h index d179b34592..665c1f7b3f 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h index df146f9e49..ba8907dafb 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration.h b/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration.h index 31ff161ee7..d123172eb2 100644 --- a/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration.h +++ b/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h index 9c4ce421c8..619f19b280 100644 --- a/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h index 59fc8c3eb8..9564ae8b1b 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h index 8074232cc5..6140cd1cc8 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h index 597dc07cac..72e75a4ba2 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration.h +++ b/config/examples/Creality/CR-20 Pro/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2546,7 +2543,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index a2a0eb9cce..344bffd237 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h index 2f6c104e29..d1a05c0f1b 100644 --- a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h +++ b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h index 0c44190a97..2adbb3f4b1 100644 --- a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/CR-20/Stock/Configuration.h b/config/examples/Creality/CR-20/Stock/Configuration.h index a30de5ef39..637084a931 100644 --- a/config/examples/Creality/CR-20/Stock/Configuration.h +++ b/config/examples/Creality/CR-20/Stock/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2546,7 +2543,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/CR-20/Stock/Configuration_adv.h b/config/examples/Creality/CR-20/Stock/Configuration_adv.h index 0c44190a97..2adbb3f4b1 100644 --- a/config/examples/Creality/CR-20/Stock/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Stock/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration.h b/config/examples/Creality/CR-30 PrintMill/Configuration.h index a83e40b87a..39fd6e10b9 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h index 8ad398b982..62b079c4fa 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/CR-6 SE/Configuration.h b/config/examples/Creality/CR-6 SE/Configuration.h index 9c388c8d74..11cc415932 100644 --- a/config/examples/Creality/CR-6 SE/Configuration.h +++ b/config/examples/Creality/CR-6 SE/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 0 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/CR-6 SE/Configuration_adv.h b/config/examples/Creality/CR-6 SE/Configuration_adv.h index 4573942a12..a115f0296f 100644 --- a/config/examples/Creality/CR-6 SE/Configuration_adv.h +++ b/config/examples/Creality/CR-6 SE/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index d9ce341139..8318cda6b9 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index 36fac59c10..24856019a3 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration.h b/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration.h index 84b53a0b19..b58fdfb352 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h b/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h index 553adb7840..5339de6957 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h index bfa1ce0a47..5ccc7d284d 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 0 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h index 942ec6df4d..f2d92f1cb2 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index 14d95a500a..7922b9380c 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index f0cb04bfc6..e9a9acf3c5 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3 Max Neo/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3 Max Neo/BigTreeTech SKR Mini E3 3.0/Configuration.h index 3818aeddad..ff839ea138 100644 --- a/config/examples/Creality/Ender-3 Max Neo/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Max Neo/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -481,7 +481,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -666,6 +666,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 0 @@ -1874,15 +1876,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1895,8 +1894,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2547,7 +2544,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3 Max Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Max Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 30bd801c7e..53b611563a 100644 --- a/config/examples/Creality/Ender-3 Max Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3 Max Neo/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3 Max Neo/CrealityV422/Configuration.h index 00bd950769..5beac6d65b 100644 --- a/config/examples/Creality/Ender-3 Max Neo/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3 Max Neo/CrealityV422/Configuration.h @@ -478,7 +478,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -663,6 +663,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 0 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3 Max Neo/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Max Neo/CrealityV422/Configuration_adv.h index 61f0f8bb03..d6b7752090 100644 --- a/config/examples/Creality/Ender-3 Max Neo/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max Neo/CrealityV422/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3 Max/Configuration.h b/config/examples/Creality/Ender-3 Max/Configuration.h index 87e6d314fc..5fdf8cc8f9 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration.h +++ b/config/examples/Creality/Ender-3 Max/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1874,15 +1876,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1895,8 +1894,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2547,7 +2544,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3 Max/Configuration_adv.h b/config/examples/Creality/Ender-3 Max/Configuration_adv.h index 861fec1cdc..61889afeda 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3 Neo/Configuration.h b/config/examples/Creality/Ender-3 Neo/Configuration.h index ff6c2467d9..ea291836d1 100644 --- a/config/examples/Creality/Ender-3 Neo/Configuration.h +++ b/config/examples/Creality/Ender-3 Neo/Configuration.h @@ -478,7 +478,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -663,6 +663,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 0 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3 Neo/Configuration_adv.h b/config/examples/Creality/Ender-3 Neo/Configuration_adv.h index b930ba4390..85ccd74d5f 100644 --- a/config/examples/Creality/Ender-3 Neo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Neo/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h index bc55a3fb27..f979977a18 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h index e671381954..1fd4c0ca4d 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h index 47cf32e4bc..241c9ab800 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 9a20c408dd..eab034d379 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index c544d1d79d..0856feeff7 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 9a20c408dd..eab034d379 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h index 07a1a9a29c..9b85fea6c9 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 797fdab4e8..b563f3a7c5 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/BLTouch/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/BLTouch/Configuration.h index f70a7b9765..c31241a5b0 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/BLTouch/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1869,15 +1871,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1890,8 +1889,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2542,7 +2539,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/BLTouch/Configuration_adv.h index 687d7d6f46..c0ddf9f454 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/BLTouch/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2599,13 +2602,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2637,6 +2642,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2843,7 +2850,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/base/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/base/Configuration.h index 31f44b16a7..23061840f5 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/base/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/base/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1869,15 +1871,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1890,8 +1889,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2542,7 +2539,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/base/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/base/Configuration_adv.h index f2b338e415..b7940b16cd 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/base/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration.h b/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration.h index 2c2a853e27..d7883fa995 100644 --- a/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration_adv.h index f9e2af1311..4a7143f2b3 100644 --- a/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h index 662a206b2a..6f1325f408 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h index 9e68e3d798..c1461a058b 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h index ed921401fd..f5bbdea722 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h @@ -476,7 +476,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -661,6 +661,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h index d4d1adb458..1765e6cf3a 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/BLTouch/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/BLTouch/Configuration.h index fae6d4a1a6..1d136644dd 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/BLTouch/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/BLTouch/Configuration_adv.h index d2c90c295a..7096476cf6 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/BLTouch/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/base/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/base/Configuration.h index 540ed5d737..3c0252fe08 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/base/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/base/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/base/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/base/Configuration_adv.h index fbf20fffb1..67b054c913 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/base/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3 S1 Plus/Configuration.h b/config/examples/Creality/Ender-3 S1 Plus/Configuration.h index 3101fdc7e0..49c103a99b 100644 --- a/config/examples/Creality/Ender-3 S1 Plus/Configuration.h +++ b/config/examples/Creality/Ender-3 S1 Plus/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h b/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h index 8fbc66f7a5..63fb39cc67 100644 --- a/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3 S1 Pro/Configuration.h b/config/examples/Creality/Ender-3 S1 Pro/Configuration.h index 6b07808126..b33e9e9939 100644 --- a/config/examples/Creality/Ender-3 S1 Pro/Configuration.h +++ b/config/examples/Creality/Ender-3 S1 Pro/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h b/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h index 8fbc66f7a5..63fb39cc67 100644 --- a/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h index 8d737dbf33..d1ff28c92d 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h +++ b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h index 0fc632dce6..a2135fd44c 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h index 0c6010b6ba..a2cfce26d0 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h +++ b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h index 5e2bf44de3..29ae90d35d 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration.h index 7cd369f5b8..c86b3599e2 100644 --- a/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 0 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 60326ea874..05fa57bbe6 100644 --- a/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration.h index 9f78024db5..a80d0e4c4b 100644 --- a/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration.h @@ -478,7 +478,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -663,6 +663,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 0 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration_adv.h index 7d46df96a6..e4bd0f4165 100644 --- a/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h index c6e147064c..00d70c0b6c 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 0 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h index d59692ade5..057426c6a4 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h index b9c4301e55..07b88481e7 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 0 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h index 8acf867258..8401ad0ad8 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration.h index 81134efc2c..27b6fec82f 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration.h @@ -478,7 +478,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -663,6 +663,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 0 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration_adv.h index b3be3fe3d4..a5c2b1b052 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration.h index 5f620efb38..de5e4ab774 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration.h @@ -478,7 +478,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -663,6 +663,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 0 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration_adv.h index 9288abc041..ef088141ed 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration.h index 27032d1a27..bdade34b5b 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 0 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration_adv.h index b196134502..280555ae51 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration.h index c8dbd4c044..8256e611af 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 0 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration_adv.h index e9bf862d2d..c6b17ebf88 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h index cbe21044f8..2ea90e3ed2 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 0 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h index e1908f1265..9dfc70508c 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h index bbdcbda6cd..77e67c7a31 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 0 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h index 834cc3621f..f361879be0 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration.h index 6d9762d716..d1a9994dfd 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 0 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration_adv.h index 204d33eebe..a98a2df7ae 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration.h index 60005ebece..23149897ec 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 0 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration_adv.h index 89c4dad11b..fd13e03de8 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h index fac8e53029..7002a7889c 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1869,15 +1871,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1890,8 +1889,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2542,7 +2539,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h index 280fa40d20..b1a9af4490 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h index 09aaffd5f6..70735b2821 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1867,15 +1869,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1888,8 +1887,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2540,7 +2537,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h index 4ed82e4f5b..1362e1c15d 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h index 4acfa06b36..8110bc45d0 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h index d0a0cfb0f1..6d8657423a 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h index 9bb926af36..dba3a8ec36 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1869,15 +1871,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1890,8 +1889,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2542,7 +2539,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h index 59e6687474..4afcf00534 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h index 903bc55cc9..bbf36e299d 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1869,15 +1871,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1890,8 +1889,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2542,7 +2539,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h index 9254fc5ba8..19a836f845 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h index 2a692bf37e..e8f04f2fc8 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1869,15 +1871,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1890,8 +1889,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2542,7 +2539,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h index 59e6687474..4afcf00534 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h index c2244a4f33..5d6134d7e5 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h index a058ad3aa4..06e9dc645a 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h index 62ffc1786e..282996e7f3 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1869,15 +1871,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1890,8 +1889,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2542,7 +2539,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 1dd844d499..0b7dd38b4c 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h index 38b2ecb4f2..bc9264d35e 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1869,15 +1871,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1890,8 +1889,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2542,7 +2539,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 1dd844d499..0b7dd38b4c 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h index b22a8e1d37..d5e9a4713e 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1869,15 +1871,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1890,8 +1889,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2542,7 +2539,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index d3dc9cd110..12d5f6aeb0 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h index 78a150a410..f7fbcba505 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1869,15 +1871,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1890,8 +1889,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2542,7 +2539,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 28a4506590..60450d58b0 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3/Creality free-runs/Configuration.h b/config/examples/Creality/Ender-3/Creality free-runs/Configuration.h index 87cd28e2e8..3c2ba07b23 100644 --- a/config/examples/Creality/Ender-3/Creality free-runs/Configuration.h +++ b/config/examples/Creality/Ender-3/Creality free-runs/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3/Creality free-runs/Configuration_adv.h b/config/examples/Creality/Ender-3/Creality free-runs/Configuration_adv.h index f9e2af1311..4a7143f2b3 100644 --- a/config/examples/Creality/Ender-3/Creality free-runs/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/Creality free-runs/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h index 05f37afad1..57773eba41 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index 9e68e3d798..c1461a058b 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h index 2fa617f5fb..c610b9b1dc 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1877,15 +1879,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1898,8 +1897,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2550,7 +2547,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h index 922c42991e..2dfb553184 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h index db16f36619..9aec6b5051 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h index fbf20fffb1..67b054c913 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h index 86626110ab..80b24804f0 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index 5e65e5ab61..e5b1363327 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h index f5b3861f5d..4cde444fc3 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index 5e65e5ab61..e5b1363327 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h index 778f503f69..5faaecc31d 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h index 69b0b84556..6b2e3a5056 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h index 2cdfe5fd0e..e1389d5e00 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index 5e65e5ab61..e5b1363327 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h index 36a0ef1df8..20fcf95a72 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index 5e65e5ab61..e5b1363327 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h index bc468b45b1..1ee19725af 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1876,15 +1878,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1897,8 +1896,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2549,7 +2546,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index 42774e32dc..0aefd3366e 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -1520,6 +1520,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2345,7 +2348,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2602,13 +2605,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // #define SAVED_POSITIONS 12 +// @section motion + // // G2/G3 Arc Support // @@ -2640,6 +2645,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2846,7 +2853,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h index d93dae429e..0831ab364a 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1869,15 +1871,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1890,8 +1889,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2542,7 +2539,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h index 02c3be3834..2d607650b8 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h index 274d22fa8c..8759659398 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1869,15 +1871,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1890,8 +1889,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2542,7 +2539,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h index 880fba7b66..a6fd485532 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h index 040d137197..b3f12a7edb 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h index e2872daccb..a8784a259c 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h index cc08c6f5f8..901bc7ec02 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h index 3f099f5c26..870f861b78 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index be6ff96917..7bed6d86e8 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index 638c8bf264..b50dacfd91 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h index da65158b92..1f65ccf6a7 100644 --- a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h index 91dd93d30c..1b1713d8ec 100644 --- a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-5 Plus/Creality 4.2.2 (RELOADED UI)/Configuration.h b/config/examples/Creality/Ender-5 Plus/Creality 4.2.2 (RELOADED UI)/Configuration.h index 82410e0823..ed4678c82f 100644 --- a/config/examples/Creality/Ender-5 Plus/Creality 4.2.2 (RELOADED UI)/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/Creality 4.2.2 (RELOADED UI)/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1877,15 +1879,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1898,8 +1897,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2550,7 +2547,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-5 Plus/Creality 4.2.2 (RELOADED UI)/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/Creality 4.2.2 (RELOADED UI)/Configuration_adv.h index b44a2fdfd9..8c14c9a010 100644 --- a/config/examples/Creality/Ender-5 Plus/Creality 4.2.2 (RELOADED UI)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/Creality 4.2.2 (RELOADED UI)/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration.h b/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration.h index dcc283cb03..cd8b574221 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration.h @@ -480,7 +480,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -665,6 +665,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1880,15 +1882,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1901,8 +1900,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2553,7 +2550,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h index bb6ff40ffe..8be2956be9 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration.h b/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration.h index 21a37710a5..e4deb3a2dc 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration.h @@ -480,7 +480,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -665,6 +665,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1880,15 +1882,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1901,8 +1900,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2553,7 +2550,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h index 9462685ee4..0473a038c6 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h index 522a7d93ce..3795f35fd1 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h @@ -480,7 +480,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -665,6 +665,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1878,15 +1880,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1899,8 +1898,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2553,7 +2550,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 767e5c54ed..4a7df8235b 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index 710966e7f8..410ec439b0 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1869,15 +1871,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1890,8 +1889,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2542,7 +2539,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index f917896dca..d73357b64a 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h index 710fbba1e3..8546a5a6ad 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h index 65d31ac7b8..f82a94a882 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h index 0708d70b81..392a961aed 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h index 68dddef783..53f82edd34 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h index 0915ef9662..992f96377c 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h index 8eca2d2dd7..1c4af2ec4d 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h index 26aedd7a3c..6a7a8bd96b 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h @@ -480,7 +480,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -665,6 +665,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1884,15 +1886,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1905,8 +1904,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2565,7 +2562,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h index b4072a1f79..4fc91d9452 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h index b212d524bb..64184c32ef 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h index 48fa911b4f..ed4fb40d8f 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-5 S1/Configuration.h b/config/examples/Creality/Ender-5 S1/Configuration.h index f713199cae..3c9784d839 100644 --- a/config/examples/Creality/Ender-5 S1/Configuration.h +++ b/config/examples/Creality/Ender-5 S1/Configuration.h @@ -493,7 +493,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -678,6 +678,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 0 @@ -1912,15 +1914,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1933,8 +1932,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2585,7 +2582,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-5 S1/Configuration_adv.h b/config/examples/Creality/Ender-5 S1/Configuration_adv.h index 22b6371e9c..4af4a5e543 100644 --- a/config/examples/Creality/Ender-5 S1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 S1/Configuration_adv.h @@ -1524,6 +1524,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 20*60, 20*60, 4*60, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2350,7 +2353,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2607,13 +2610,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2645,6 +2650,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2851,7 +2858,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h index 416c9cb1b7..203ad8df4b 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index 767e5c54ed..4a7df8235b 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h index bb81a67640..bdf89f7434 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 067b80f5e3..0be314db41 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h index 15a70528f1..79b697c613 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1869,15 +1871,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1890,8 +1889,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2542,7 +2539,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 5f134e593c..7dc8ca1134 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h index f1dceeca40..18baf03125 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1869,15 +1871,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1890,8 +1889,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2542,7 +2539,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 663bd88575..65e3162a88 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration.h index e427ef9b50..707c4d981e 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h index ac4aa4dd15..2b465e16f3 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-5/Creality free-runs/Configuration.h b/config/examples/Creality/Ender-5/Creality free-runs/Configuration.h index 2088ea204f..532bab14b9 100644 --- a/config/examples/Creality/Ender-5/Creality free-runs/Configuration.h +++ b/config/examples/Creality/Ender-5/Creality free-runs/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-5/Creality free-runs/Configuration_adv.h b/config/examples/Creality/Ender-5/Creality free-runs/Configuration_adv.h index 0eec4d81d1..d68bbfc8fd 100644 --- a/config/examples/Creality/Ender-5/Creality free-runs/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/Creality free-runs/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h index ad6f265256..6155c1b265 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h index fda40dbf23..2f5c37866b 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration.h index 8954a119b9..27933c3374 100644 --- a/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration_adv.h index 03e61b55f9..82f6ec1cda 100644 --- a/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h index da787eaff9..9d0592565c 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h index 990a9559c5..97482f7c51 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Creality/Ender-6/Configuration.h b/config/examples/Creality/Ender-6/Configuration.h index 7119a72b41..1d9c2103bf 100644 --- a/config/examples/Creality/Ender-6/Configuration.h +++ b/config/examples/Creality/Ender-6/Configuration.h @@ -480,7 +480,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -665,6 +665,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1877,15 +1879,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1898,8 +1897,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2554,7 +2551,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Creality/Ender-6/Configuration_adv.h b/config/examples/Creality/Ender-6/Configuration_adv.h index 711a541a56..abf7d3bb99 100644 --- a/config/examples/Creality/Ender-6/Configuration_adv.h +++ b/config/examples/Creality/Ender-6/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h index a8dd4e3d4f..e73905f849 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR true @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index eaf959ee5d..154bee9b09 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Daycom/3DP-100/Configuration.h b/config/examples/Daycom/3DP-100/Configuration.h index 2f0c94e889..b1fb8786cc 100644 --- a/config/examples/Daycom/3DP-100/Configuration.h +++ b/config/examples/Daycom/3DP-100/Configuration.h @@ -480,7 +480,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -665,6 +665,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1874,15 +1876,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1895,8 +1894,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2547,7 +2544,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index 8ed2f320b9..490c0f7790 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/E3D/BigBox Dual/Configuration.h b/config/examples/E3D/BigBox Dual/Configuration.h index f9afaca473..73bbd37d4b 100644 --- a/config/examples/E3D/BigBox Dual/Configuration.h +++ b/config/examples/E3D/BigBox Dual/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/E3D/BigBox Dual/Configuration_adv.h b/config/examples/E3D/BigBox Dual/Configuration_adv.h index 0130bc6e92..338246993c 100644 --- a/config/examples/E3D/BigBox Dual/Configuration_adv.h +++ b/config/examples/E3D/BigBox Dual/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration.h b/config/examples/EXP3D/Imprimante multifonction/Configuration.h index 6085c7c316..4c6e81faa2 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 0 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2541,7 +2538,7 @@ // #define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index 25fabb3d2c..a75e16d7d6 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ #define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h index 0d6f180471..d22364ac4c 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h index bdd8738212..c076ad22c4 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Eazao/Zero/Configuration.h b/config/examples/Eazao/Zero/Configuration.h index 68bdba5b17..190932c556 100644 --- a/config/examples/Eazao/Zero/Configuration.h +++ b/config/examples/Eazao/Zero/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Eazao/Zero/Configuration_adv.h b/config/examples/Eazao/Zero/Configuration_adv.h index 01c3417068..35fda65f67 100644 --- a/config/examples/Eazao/Zero/Configuration_adv.h +++ b/config/examples/Eazao/Zero/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index 2765f060dc..6a2c1f31c6 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1875,15 +1877,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1896,8 +1895,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2548,7 +2545,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index 74b391386d..d98df9480b 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Elegoo/Neptune 2/Configuration.h b/config/examples/Elegoo/Neptune 2/Configuration.h index 1d48e653c0..00418e24b6 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration.h +++ b/config/examples/Elegoo/Neptune 2/Configuration.h @@ -510,7 +510,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -695,6 +695,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1926,15 +1928,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1947,8 +1946,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2613,7 +2610,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Elegoo/Neptune 2/Configuration_adv.h b/config/examples/Elegoo/Neptune 2/Configuration_adv.h index 051af91b38..f7ce3d8379 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration_adv.h +++ b/config/examples/Elegoo/Neptune 2/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 10*60, 5*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Eryone/Thinker SE/Configuration.h b/config/examples/Eryone/Thinker SE/Configuration.h index eea5bd8bce..a4b1e5e038 100644 --- a/config/examples/Eryone/Thinker SE/Configuration.h +++ b/config/examples/Eryone/Thinker SE/Configuration.h @@ -485,7 +485,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -670,6 +670,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1893,15 +1895,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1914,8 +1913,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2578,7 +2575,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Eryone/Thinker SE/Configuration_adv.h b/config/examples/Eryone/Thinker SE/Configuration_adv.h index dd4986163d..d31152b66c 100644 --- a/config/examples/Eryone/Thinker SE/Configuration_adv.h +++ b/config/examples/Eryone/Thinker SE/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2609,13 +2612,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2647,6 +2652,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2853,7 +2860,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Eryone/Thinker V2/Configuration.h b/config/examples/Eryone/Thinker V2/Configuration.h index e071991699..760449e5a0 100644 --- a/config/examples/Eryone/Thinker V2/Configuration.h +++ b/config/examples/Eryone/Thinker V2/Configuration.h @@ -485,7 +485,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -670,6 +670,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1894,15 +1896,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1915,8 +1914,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2580,7 +2577,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Eryone/Thinker V2/Configuration_adv.h b/config/examples/Eryone/Thinker V2/Configuration_adv.h index fef21bbd3b..9749cf60e4 100644 --- a/config/examples/Eryone/Thinker V2/Configuration_adv.h +++ b/config/examples/Eryone/Thinker V2/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2609,13 +2612,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2647,6 +2652,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2853,7 +2860,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h index 2686d72346..c387ef93a3 100644 --- a/config/examples/FYSETC/AIO_II/Configuration.h +++ b/config/examples/FYSETC/AIO_II/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index 1bb3107cfb..38f67101fe 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h index 4d8d05d796..0822bb90c9 100644 --- a/config/examples/FYSETC/F6_13/Configuration.h +++ b/config/examples/FYSETC/F6_13/Configuration.h @@ -479,7 +479,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -664,6 +664,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1872,15 +1874,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1893,8 +1892,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2545,7 +2542,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index 868e4703c4..d2c711b768 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/FYSETC/S6/Configuration.h b/config/examples/FYSETC/S6/Configuration.h index fc269c2000..1850b623ff 100644 --- a/config/examples/FYSETC/S6/Configuration.h +++ b/config/examples/FYSETC/S6/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index 50258c850a..965f951a11 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index 7e6b4cad96..ffd642d0c8 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR true @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index f906c6dfdf..39d1f61751 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Felix/Single/Configuration.h b/config/examples/Felix/Single/Configuration.h index 71cd4a1121..eea8c65c12 100644 --- a/config/examples/Felix/Single/Configuration.h +++ b/config/examples/Felix/Single/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index f906c6dfdf..39d1f61751 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/FlashForge/Creator 2X/Configuration.h b/config/examples/FlashForge/Creator 2X/Configuration.h index af6ba0f11d..28777571a5 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration.h +++ b/config/examples/FlashForge/Creator 2X/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index 1c9d4290c3..2f4a0b73e6 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index 6184a71200..19697dd12d 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index 42d12cfec4..c1e88ba7af 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -1523,6 +1523,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2348,7 +2351,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2605,13 +2608,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2643,6 +2648,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2849,7 +2856,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration.h b/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration.h index e011c43ba9..c467004f70 100644 --- a/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration.h +++ b/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration_adv.h b/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration_adv.h index 6a9dd58f80..e3ecbe494d 100644 --- a/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration_adv.h +++ b/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration_adv.h @@ -1519,6 +1519,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2344,7 +2347,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2601,13 +2604,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2639,6 +2644,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2845,7 +2852,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/FlyingBear/P902/Configuration.h b/config/examples/FlyingBear/P902/Configuration.h index 2015ae61b0..5ba83ef07f 100644 --- a/config/examples/FlyingBear/P902/Configuration.h +++ b/config/examples/FlyingBear/P902/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/FlyingBear/P902/Configuration_adv.h b/config/examples/FlyingBear/P902/Configuration_adv.h index 87e4834062..fbf004fc67 100644 --- a/config/examples/FlyingBear/P902/Configuration_adv.h +++ b/config/examples/FlyingBear/P902/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/FlyingBear/P905H/Configuration.h b/config/examples/FlyingBear/P905H/Configuration.h index 7eb4f3c28e..9269746aed 100644 --- a/config/examples/FlyingBear/P905H/Configuration.h +++ b/config/examples/FlyingBear/P905H/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1874,15 +1876,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1895,8 +1894,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2548,7 +2545,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index 44d3d877c6..15b1c5c31a 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2349,7 +2352,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2606,13 +2609,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2644,6 +2649,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2850,7 +2857,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/FoamCutter/generic/Configuration.h b/config/examples/FoamCutter/generic/Configuration.h index dfc4a8c9de..0e040b4b9b 100644 --- a/config/examples/FoamCutter/generic/Configuration.h +++ b/config/examples/FoamCutter/generic/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/FoamCutter/generic/Configuration_adv.h b/config/examples/FoamCutter/generic/Configuration_adv.h index 73face9271..f863515b5e 100644 --- a/config/examples/FoamCutter/generic/Configuration_adv.h +++ b/config/examples/FoamCutter/generic/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 50*60, 50*60, 50*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/FoamCutter/rcKeith/Configuration.h b/config/examples/FoamCutter/rcKeith/Configuration.h index 3f847a7102..790f67e50a 100644 --- a/config/examples/FoamCutter/rcKeith/Configuration.h +++ b/config/examples/FoamCutter/rcKeith/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/FoamCutter/rcKeith/Configuration_adv.h b/config/examples/FoamCutter/rcKeith/Configuration_adv.h index 73face9271..f863515b5e 100644 --- a/config/examples/FoamCutter/rcKeith/Configuration_adv.h +++ b/config/examples/FoamCutter/rcKeith/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 50*60, 50*60, 50*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/FolgerTech/FT-5 R2/Configuration.h b/config/examples/FolgerTech/FT-5 R2/Configuration.h index b48deb0cc4..e1aef0d710 100644 --- a/config/examples/FolgerTech/FT-5 R2/Configuration.h +++ b/config/examples/FolgerTech/FT-5 R2/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1867,15 +1869,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1888,8 +1887,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2540,7 +2537,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h b/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h index c9548f9e8a..f804be3e9a 100644 --- a/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h +++ b/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index b71a78565b..ba73f58bfb 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1872,15 +1874,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1893,8 +1892,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2545,7 +2542,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index ff9ea6b314..c1f7d2f43f 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index 50e26423d3..b8fe717bdf 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -520,7 +520,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -709,6 +709,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1961,15 +1963,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #if ENABLED(X_2208) @@ -1990,8 +1989,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #if ENABLED(E_2208) #define INVERT_E0_DIR false @@ -2653,7 +2650,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index d8df551a22..d127d6d433 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2605,13 +2608,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2643,6 +2648,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2849,7 +2856,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h index 0b8175e512..fcb4899c03 100644 --- a/config/examples/Geeetech/A10/Configuration.h +++ b/config/examples/Geeetech/A10/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false // unused, the A10 only has one extruder by default @@ -2541,7 +2538,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index 661c2716ea..1163747470 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Geeetech/A10D/Configuration.h b/config/examples/Geeetech/A10D/Configuration.h index 4d7d083c1c..396f1c8fe0 100644 --- a/config/examples/Geeetech/A10D/Configuration.h +++ b/config/examples/Geeetech/A10D/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1869,15 +1871,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1890,8 +1889,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2542,7 +2539,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index 7eb6009d6f..5a13a597dc 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h index 11f2d454bf..c73fa8da14 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h index 235f0322cd..651b8f5e5e 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h index 859871ce0f..bd26a794e0 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h index 235f0322cd..651b8f5e5e 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Geeetech/A10PRO/Configuration.h b/config/examples/Geeetech/A10PRO/Configuration.h index b12f90b85e..de7c432ca0 100644 --- a/config/examples/Geeetech/A10PRO/Configuration.h +++ b/config/examples/Geeetech/A10PRO/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false // unused, the A10 only has one extruder by default @@ -2541,7 +2538,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Geeetech/A10PRO/Configuration_adv.h b/config/examples/Geeetech/A10PRO/Configuration_adv.h index 661c2716ea..1163747470 100644 --- a/config/examples/Geeetech/A10PRO/Configuration_adv.h +++ b/config/examples/Geeetech/A10PRO/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h index 7c5b431fe9..fcee0fc04c 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h index 235f0322cd..651b8f5e5e 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h index 25a63a715b..d861d99327 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h index 235f0322cd..651b8f5e5e 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Geeetech/A20/Configuration.h b/config/examples/Geeetech/A20/Configuration.h index eb4f6eb45a..11302e92ea 100644 --- a/config/examples/Geeetech/A20/Configuration.h +++ b/config/examples/Geeetech/A20/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index 04bd786c24..bcfc568208 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index d8ac7549f9..2b5d62581b 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index 04bd786c24..bcfc568208 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Geeetech/A20T/Configuration.h b/config/examples/Geeetech/A20T/Configuration.h index 875cd6366a..7f19f56c65 100644 --- a/config/examples/Geeetech/A20T/Configuration.h +++ b/config/examples/Geeetech/A20T/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index 04bd786c24..bcfc568208 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Geeetech/A30/Configuration.h b/config/examples/Geeetech/A30/Configuration.h index e4d0a96cbd..1fdbddf661 100644 --- a/config/examples/Geeetech/A30/Configuration.h +++ b/config/examples/Geeetech/A30/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 0 @@ -1868,15 +1870,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1889,8 +1888,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2541,7 +2538,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index a7d9fc4583..aec8186e7c 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Geeetech/A30M/Configuration.h b/config/examples/Geeetech/A30M/Configuration.h index bea93be3ac..ce14d80935 100644 --- a/config/examples/Geeetech/A30M/Configuration.h +++ b/config/examples/Geeetech/A30M/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 0 @@ -1868,15 +1870,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1889,8 +1888,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2541,7 +2538,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Geeetech/A30M/Configuration_adv.h b/config/examples/Geeetech/A30M/Configuration_adv.h index a7d9fc4583..aec8186e7c 100644 --- a/config/examples/Geeetech/A30M/Configuration_adv.h +++ b/config/examples/Geeetech/A30M/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Geeetech/A30T/Configuration.h b/config/examples/Geeetech/A30T/Configuration.h index 671a96498a..59483772a7 100644 --- a/config/examples/Geeetech/A30T/Configuration.h +++ b/config/examples/Geeetech/A30T/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 0 @@ -1868,15 +1870,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping //#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1889,8 +1888,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2541,7 +2538,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Geeetech/A30T/Configuration_adv.h b/config/examples/Geeetech/A30T/Configuration_adv.h index a7d9fc4583..aec8186e7c 100644 --- a/config/examples/Geeetech/A30T/Configuration_adv.h +++ b/config/examples/Geeetech/A30T/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Geeetech/D200/Configuration.h b/config/examples/Geeetech/D200/Configuration.h index e260ec73f4..45a65041c8 100644 --- a/config/examples/Geeetech/D200/Configuration.h +++ b/config/examples/Geeetech/D200/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 0 @@ -1868,15 +1870,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1889,8 +1888,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2541,7 +2538,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index 2dff1b447d..0f274d1f48 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Geeetech/Duplicator5/Configuration.h b/config/examples/Geeetech/Duplicator5/Configuration.h index ec662cb1e7..2c4a343dac 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration.h +++ b/config/examples/Geeetech/Duplicator5/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index 50258c850a..965f951a11 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Geeetech/E180/Configuration.h b/config/examples/Geeetech/E180/Configuration.h index 3b5a5ded1e..8578c02492 100644 --- a/config/examples/Geeetech/E180/Configuration.h +++ b/config/examples/Geeetech/E180/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 0 @@ -1869,15 +1871,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1890,8 +1889,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2542,7 +2539,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index a7d9fc4583..aec8186e7c 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index 736618061c..0f692ce59d 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1875,15 +1877,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1896,8 +1895,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2548,7 +2545,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Geeetech/GT2560/Configuration_adv.h b/config/examples/Geeetech/GT2560/Configuration_adv.h index c4ee2c2ffe..7a6ea2834a 100644 --- a/config/examples/Geeetech/GT2560/Configuration_adv.h +++ b/config/examples/Geeetech/GT2560/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index f317dee0a5..56f66733d8 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h index c4ee2c2ffe..7a6ea2834a 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Geeetech/M201/Configuration.h b/config/examples/Geeetech/M201/Configuration.h index f5841acee6..3fdd5e8aab 100644 --- a/config/examples/Geeetech/M201/Configuration.h +++ b/config/examples/Geeetech/M201/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 0 @@ -1868,15 +1870,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1889,8 +1888,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2541,7 +2538,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index 2dff1b447d..0f274d1f48 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index 7f25a1780c..0b8f4c0bc4 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1869,15 +1871,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1890,8 +1889,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2542,7 +2539,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index 3af354fe41..0620012d1b 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Geeetech/Me_creator/Configuration.h b/config/examples/Geeetech/Me_creator/Configuration.h index 2d0c8089cf..b996047389 100644 --- a/config/examples/Geeetech/Me_creator/Configuration.h +++ b/config/examples/Geeetech/Me_creator/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index 50258c850a..965f951a11 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Geeetech/Me_ducer/Configuration.h b/config/examples/Geeetech/Me_ducer/Configuration.h index e0bf2aa0be..ea8a343497 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration.h +++ b/config/examples/Geeetech/Me_ducer/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index 327617014b..a349cdfb53 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Geeetech/PI3A PRO/Configuration.h b/config/examples/Geeetech/PI3A PRO/Configuration.h index a74d8839c7..e4c018aff2 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1880,15 +1882,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1901,8 +1900,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2554,7 +2551,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index ff1c2801be..7c81dc1e67 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index 3a378ccf1e..1ae648468d 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1880,15 +1882,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1901,8 +1900,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2554,7 +2551,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h index c4ee2c2ffe..7a6ea2834a 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 0c760df72e..4bed5f46a1 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1880,15 +1882,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1901,8 +1900,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2554,7 +2551,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h index c4ee2c2ffe..7a6ea2834a 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index 8851c53178..64f49d5267 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 661c2716ea..1163747470 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index 8044739511..bb70409605 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 661c2716ea..1163747470 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h index 183f5ad3db..69e653c5f9 100644 --- a/config/examples/HMS434/Configuration.h +++ b/config/examples/HMS434/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -660,6 +660,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1868,15 +1870,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1889,8 +1888,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2541,7 +2538,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index 34033c1669..8b997a11fc 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Hictop/3DP-17/Configuration.h b/config/examples/Hictop/3DP-17/Configuration.h index 6f5e59e878..71b47d2f39 100644 --- a/config/examples/Hictop/3DP-17/Configuration.h +++ b/config/examples/Hictop/3DP-17/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Hictop/3DP-17/Configuration_adv.h b/config/examples/Hictop/3DP-17/Configuration_adv.h index 8d5e679b7f..02beeb1471 100644 --- a/config/examples/Hictop/3DP-17/Configuration_adv.h +++ b/config/examples/Hictop/3DP-17/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index 74a1200828..6785e7063e 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index e44426f24a..1573611631 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration.h b/config/examples/Intamsys/FunmatHT 4988/Configuration.h index e064ccf38f..b6bd6289e6 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h index 4e072ef837..e37747930c 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h index c60156485f..304832aef0 100644 --- a/config/examples/JGAurora/A1/Configuration.h +++ b/config/examples/JGAurora/A1/Configuration.h @@ -478,7 +478,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -663,6 +663,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1874,15 +1876,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1895,8 +1894,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2547,7 +2544,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index b4918fa1af..2139cc4ed7 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -1527,6 +1527,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 60*60, 60*60, 10*60, 10*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2352,7 +2355,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2609,13 +2612,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2647,6 +2652,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2853,7 +2860,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/JGAurora/A3/Configuration.h b/config/examples/JGAurora/A3/Configuration.h index 14320a95b6..76426af001 100644 --- a/config/examples/JGAurora/A3/Configuration.h +++ b/config/examples/JGAurora/A3/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/JGAurora/A3/Configuration_adv.h b/config/examples/JGAurora/A3/Configuration_adv.h index c4ee2c2ffe..7a6ea2834a 100644 --- a/config/examples/JGAurora/A3/Configuration_adv.h +++ b/config/examples/JGAurora/A3/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index da6c9c4742..abd0ac5d47 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -482,7 +482,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -667,6 +667,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1878,15 +1880,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1899,8 +1898,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2551,7 +2548,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index e1fddc2844..40a80e5262 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 80*60, 80*60, 12*60, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h index d0591836e7..af46ff6ebf 100644 --- a/config/examples/JGAurora/A5S/Configuration.h +++ b/config/examples/JGAurora/A5S/Configuration.h @@ -478,7 +478,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -663,6 +663,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1874,15 +1876,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1895,8 +1894,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2547,7 +2544,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index af93d45d1b..bcf476e6dd 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -1527,6 +1527,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 60*60, 60*60, 10*60, 10*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2352,7 +2355,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2609,13 +2612,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2647,6 +2652,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2853,7 +2860,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/JGAurora/Magic/Configuration.h b/config/examples/JGAurora/Magic/Configuration.h index 898c78173d..0591b3d314 100644 --- a/config/examples/JGAurora/Magic/Configuration.h +++ b/config/examples/JGAurora/Magic/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index e122dc555b..a07ed362d1 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Kingroon/KP3/Configuration.h b/config/examples/Kingroon/KP3/Configuration.h index 5e4fc492f9..23de62ca4b 100644 --- a/config/examples/Kingroon/KP3/Configuration.h +++ b/config/examples/Kingroon/KP3/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1869,15 +1871,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1890,8 +1889,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2542,7 +2539,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index 2cac6cad80..4ccade1347 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Kingroon/KP3S/Configuration.h b/config/examples/Kingroon/KP3S/Configuration.h index d89bf32ad1..a6add9334f 100644 --- a/config/examples/Kingroon/KP3S/Configuration.h +++ b/config/examples/Kingroon/KP3S/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Kingroon/KP3S/Configuration_adv.h b/config/examples/Kingroon/KP3S/Configuration_adv.h index c4ee2c2ffe..7a6ea2834a 100644 --- a/config/examples/Kingroon/KP3S/Configuration_adv.h +++ b/config/examples/Kingroon/KP3S/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Kingroon/KP3S_Pro/Configuration.h b/config/examples/Kingroon/KP3S_Pro/Configuration.h index 6564e96ccd..c8d3be9818 100644 --- a/config/examples/Kingroon/KP3S_Pro/Configuration.h +++ b/config/examples/Kingroon/KP3S_Pro/Configuration.h @@ -498,7 +498,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -683,6 +683,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1901,15 +1903,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1922,8 +1921,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2579,7 +2576,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h b/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h index 05f085176f..720e8c2310 100644 --- a/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h +++ b/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Kingroon/KP5L-DIY/Configuration.h b/config/examples/Kingroon/KP5L-DIY/Configuration.h index a975fd6bab..d5d62abef0 100644 --- a/config/examples/Kingroon/KP5L-DIY/Configuration.h +++ b/config/examples/Kingroon/KP5L-DIY/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h b/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h index 7fdb58989b..7d28517fd2 100644 --- a/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h +++ b/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Labists/ET4/Configuration.h b/config/examples/Labists/ET4/Configuration.h index 7efc125d16..0df629685b 100644 --- a/config/examples/Labists/ET4/Configuration.h +++ b/config/examples/Labists/ET4/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1876,15 +1878,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1897,8 +1896,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2549,7 +2546,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Labists/ET4/Configuration_adv.h b/config/examples/Labists/ET4/Configuration_adv.h index c43d6ede8d..7301935b85 100644 --- a/config/examples/Labists/ET4/Configuration_adv.h +++ b/config/examples/Labists/ET4/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Longer/LK5/Configuration.h b/config/examples/Longer/LK5/Configuration.h index e23df66fb9..3beec32c60 100644 --- a/config/examples/Longer/LK5/Configuration.h +++ b/config/examples/Longer/LK5/Configuration.h @@ -478,7 +478,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -663,6 +663,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Longer/LK5/Configuration_adv.h b/config/examples/Longer/LK5/Configuration_adv.h index 438c7d586f..7f03e796c5 100644 --- a/config/examples/Longer/LK5/Configuration_adv.h +++ b/config/examples/Longer/LK5/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/LulzBot/TAZ4/Configuration.h b/config/examples/LulzBot/TAZ4/Configuration.h index 4d1fc2cb07..0d26288403 100644 --- a/config/examples/LulzBot/TAZ4/Configuration.h +++ b/config/examples/LulzBot/TAZ4/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1881,15 +1883,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1902,8 +1901,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2554,7 +2551,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/LulzBot/TAZ4/Configuration_adv.h b/config/examples/LulzBot/TAZ4/Configuration_adv.h index 0597e6d305..05eab23fe7 100644 --- a/config/examples/LulzBot/TAZ4/Configuration_adv.h +++ b/config/examples/LulzBot/TAZ4/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/MBot/Cube/Configuration.h b/config/examples/MBot/Cube/Configuration.h index 4533b8bfcf..63f6f2e161 100644 --- a/config/examples/MBot/Cube/Configuration.h +++ b/config/examples/MBot/Cube/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index 6196fe6bf6..642604dfd3 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/MZ3D/360/Configuration.h b/config/examples/MZ3D/360/Configuration.h index cd635d312c..d456f46ddf 100644 --- a/config/examples/MZ3D/360/Configuration.h +++ b/config/examples/MZ3D/360/Configuration.h @@ -465,7 +465,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -650,6 +650,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1861,15 +1863,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1882,8 +1881,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2534,7 +2531,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/MZ3D/360/Configuration_adv.h b/config/examples/MZ3D/360/Configuration_adv.h index 6829b55adc..890357f972 100644 --- a/config/examples/MZ3D/360/Configuration_adv.h +++ b/config/examples/MZ3D/360/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2599,13 +2602,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2637,6 +2642,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2843,7 +2850,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/MakerBot/Replicator Dual/Configuration.h b/config/examples/MakerBot/Replicator Dual/Configuration.h index 3c2c30dedb..e0f30c5f0a 100644 --- a/config/examples/MakerBot/Replicator Dual/Configuration.h +++ b/config/examples/MakerBot/Replicator Dual/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/MakerBot/Replicator Dual/Configuration_adv.h b/config/examples/MakerBot/Replicator Dual/Configuration_adv.h index 61ab0087a2..d55cd03e16 100644 --- a/config/examples/MakerBot/Replicator Dual/Configuration_adv.h +++ b/config/examples/MakerBot/Replicator Dual/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2599,13 +2602,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2637,6 +2642,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2843,7 +2850,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/MakerBot/Replicator Single/Configuration.h b/config/examples/MakerBot/Replicator Single/Configuration.h index 54caa1a278..cb407629e7 100644 --- a/config/examples/MakerBot/Replicator Single/Configuration.h +++ b/config/examples/MakerBot/Replicator Single/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/MakerBot/Replicator Single/Configuration_adv.h b/config/examples/MakerBot/Replicator Single/Configuration_adv.h index 90c4a405d4..0189e4a7b9 100644 --- a/config/examples/MakerBot/Replicator Single/Configuration_adv.h +++ b/config/examples/MakerBot/Replicator Single/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2599,13 +2602,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2637,6 +2642,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2843,7 +2850,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration.h b/config/examples/MakerFarm/Pegasus 12/Configuration.h index ed698368b3..266a201e3f 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1876,15 +1878,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1897,8 +1896,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2549,7 +2546,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h index b77418cfe4..0846e361f4 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2842,7 +2849,7 @@ */ #define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/MakerGear/M2 Rev H/Configuration.h b/config/examples/MakerGear/M2 Rev H/Configuration.h index 155e81e5fb..ab9fdcd0d1 100644 --- a/config/examples/MakerGear/M2 Rev H/Configuration.h +++ b/config/examples/MakerGear/M2 Rev H/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1873,15 +1875,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1894,8 +1893,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false // Rev H #define INVERT_E1_DIR false @@ -2546,7 +2543,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/MakerGear/M2 Rev H/Configuration_adv.h b/config/examples/MakerGear/M2 Rev H/Configuration_adv.h index 7f59448f76..c5873b7dfb 100644 --- a/config/examples/MakerGear/M2 Rev H/Configuration_adv.h +++ b/config/examples/MakerGear/M2 Rev H/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2599,13 +2602,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2637,6 +2642,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2843,7 +2850,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index dd3e9c45b9..5de9a62684 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // #define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 1b74addb94..af83edb173 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/MakerTech3D/Proforge2sDual/Configuration.h b/config/examples/MakerTech3D/Proforge2sDual/Configuration.h index 18d3560e0f..a1d89f5ad3 100644 --- a/config/examples/MakerTech3D/Proforge2sDual/Configuration.h +++ b/config/examples/MakerTech3D/Proforge2sDual/Configuration.h @@ -480,7 +480,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -665,6 +665,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1873,15 +1875,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1894,8 +1893,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2546,7 +2543,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h b/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h index 56871390ba..74b154eb45 100644 --- a/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h +++ b/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index b9d382eae2..c258df8612 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -482,7 +482,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -670,6 +670,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1894,15 +1896,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1915,8 +1914,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2571,7 +2568,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index 0230265dfb..dc653f5bc0 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Malyan/M180/Configuration.h b/config/examples/Malyan/M180/Configuration.h index 9bc35c8c8d..5dbec2b9ae 100644 --- a/config/examples/Malyan/M180/Configuration.h +++ b/config/examples/Malyan/M180/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true // TODO Timo: Double check! This is true in Malyan config because the two extruders are mirrored versions of each other #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Malyan/M180/Configuration_adv.h b/config/examples/Malyan/M180/Configuration_adv.h index c4ee2c2ffe..7a6ea2834a 100644 --- a/config/examples/Malyan/M180/Configuration_adv.h +++ b/config/examples/Malyan/M180/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index e54c203aa2..5b8ac0e82e 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1876,15 +1878,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1897,8 +1896,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2549,7 +2546,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index f1c2ddd56c..2451122361 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -1523,6 +1523,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2348,7 +2351,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2605,13 +2608,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2643,6 +2648,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2849,7 +2856,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Materia101/Configuration.h b/config/examples/Materia101/Configuration.h index b851322918..f3e71067b2 100644 --- a/config/examples/Materia101/Configuration.h +++ b/config/examples/Materia101/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR true @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Materia101/Configuration_adv.h b/config/examples/Materia101/Configuration_adv.h index 1767604ef5..aec06d0af8 100644 --- a/config/examples/Materia101/Configuration_adv.h +++ b/config/examples/Materia101/Configuration_adv.h @@ -1519,6 +1519,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2344,7 +2347,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2601,13 +2604,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2639,6 +2644,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2845,7 +2852,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index 6f70504b57..ddb46647c9 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1874,15 +1876,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1895,8 +1894,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2547,7 +2544,7 @@ // #define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Micromake/C1/basic/Configuration_adv.h b/config/examples/Micromake/C1/basic/Configuration_adv.h index 740341bb68..806d12f9e3 100644 --- a/config/examples/Micromake/C1/basic/Configuration_adv.h +++ b/config/examples/Micromake/C1/basic/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index a2c5a708c4..44301a560d 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1874,15 +1876,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1895,8 +1894,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2547,7 +2544,7 @@ // #define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 56e854e819..319b44007a 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index de72ecfdcd..d3312f7317 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index c4ee2c2ffe..7a6ea2834a 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Mks/Robin_Lite3/Configuration.h b/config/examples/Mks/Robin_Lite3/Configuration.h index 80248b38a5..1748138ceb 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration.h +++ b/config/examples/Mks/Robin_Lite3/Configuration.h @@ -485,7 +485,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -670,6 +670,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1878,15 +1880,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1899,8 +1898,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2551,7 +2548,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Mks/Robin_Lite3/Configuration_adv.h b/config/examples/Mks/Robin_Lite3/Configuration_adv.h index 8764585e50..090f14f1dc 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration_adv.h +++ b/config/examples/Mks/Robin_Lite3/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Mks/Robin_Pro/Configuration.h b/config/examples/Mks/Robin_Pro/Configuration.h index edaf6418ca..a5247ccedd 100644 --- a/config/examples/Mks/Robin_Pro/Configuration.h +++ b/config/examples/Mks/Robin_Pro/Configuration.h @@ -479,7 +479,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -664,6 +664,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1872,15 +1874,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1893,8 +1892,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2545,7 +2542,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Mks/Robin_Pro/Configuration_adv.h b/config/examples/Mks/Robin_Pro/Configuration_adv.h index c4ee2c2ffe..7a6ea2834a 100644 --- a/config/examples/Mks/Robin_Pro/Configuration_adv.h +++ b/config/examples/Mks/Robin_Pro/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index 2a0d4b2df9..991144eeb8 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index b5f2617912..fd9d402000 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Modix/Big60/Configuration.h b/config/examples/Modix/Big60/Configuration.h index 87d034b6db..bfe3f57ae5 100644 --- a/config/examples/Modix/Big60/Configuration.h +++ b/config/examples/Modix/Big60/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index f3b993c069..fa4550d537 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Nextion/Configuration.h b/config/examples/Nextion/Configuration.h index 5f7cd3b78f..107ed06dbc 100644 --- a/config/examples/Nextion/Configuration.h +++ b/config/examples/Nextion/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Nextion/Configuration_adv.h b/config/examples/Nextion/Configuration_adv.h index 323270f77b..0ec84921e6 100644 --- a/config/examples/Nextion/Configuration_adv.h +++ b/config/examples/Nextion/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h index 3f206a9aef..025d6784a0 100644 --- a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h +++ b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1901,15 +1903,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1922,8 +1921,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2574,7 +2571,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h index f54bcc599b..75d6ab8b99 100644 --- a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h +++ b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Opulo/Lumen_REV3/Configuration.h b/config/examples/Opulo/Lumen_REV3/Configuration.h index a292e48799..b3c5712a34 100644 --- a/config/examples/Opulo/Lumen_REV3/Configuration.h +++ b/config/examples/Opulo/Lumen_REV3/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h index 207e787968..c2e61a2017 100644 --- a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Opulo/Lumen_REV4/Configuration.h b/config/examples/Opulo/Lumen_REV4/Configuration.h index d6942f4320..e3263f8818 100644 --- a/config/examples/Opulo/Lumen_REV4/Configuration.h +++ b/config/examples/Opulo/Lumen_REV4/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Opulo/Lumen_REV4/Configuration_adv.h b/config/examples/Opulo/Lumen_REV4/Configuration_adv.h index 299ea874f9..189ef2d2af 100644 --- a/config/examples/Opulo/Lumen_REV4/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV4/Configuration_adv.h @@ -1520,6 +1520,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2345,7 +2348,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2602,13 +2605,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2640,6 +2645,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2846,7 +2853,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Opulo/Lumen_REV5/Configuration.h b/config/examples/Opulo/Lumen_REV5/Configuration.h index f7991188b3..beb415638d 100644 --- a/config/examples/Opulo/Lumen_REV5/Configuration.h +++ b/config/examples/Opulo/Lumen_REV5/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Opulo/Lumen_REV5/Configuration_adv.h b/config/examples/Opulo/Lumen_REV5/Configuration_adv.h index 674e2659d5..92ef5c06f1 100644 --- a/config/examples/Opulo/Lumen_REV5/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV5/Configuration_adv.h @@ -1520,6 +1520,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2345,7 +2348,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2602,13 +2605,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2640,6 +2645,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2846,7 +2853,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Ortur 4/Configuration.h b/config/examples/Ortur 4/Configuration.h index 53f7348ae3..968bbeecb9 100644 --- a/config/examples/Ortur 4/Configuration.h +++ b/config/examples/Ortur 4/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index 7b9b3e2041..bc58433144 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Polargraph/Configuration.h b/config/examples/Polargraph/Configuration.h index ebc59a6ac2..4254815961 100644 --- a/config/examples/Polargraph/Configuration.h +++ b/config/examples/Polargraph/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1874,15 +1876,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1895,8 +1894,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2547,7 +2544,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Polargraph/Configuration_adv.h b/config/examples/Polargraph/Configuration_adv.h index 1af8ad7037..7179ac6c03 100644 --- a/config/examples/Polargraph/Configuration_adv.h +++ b/config/examples/Polargraph/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index b56769ad67..7eb14e7c94 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -478,7 +478,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -663,6 +663,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1872,15 +1874,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1893,8 +1892,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2545,7 +2542,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h b/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h index c4ee2c2ffe..7a6ea2834a 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration.h b/config/examples/Printrbot/Simple Metal RevD/Configuration.h index 0bda1724ee..e2f7590702 100644 --- a/config/examples/Printrbot/Simple Metal RevD/Configuration.h +++ b/config/examples/Printrbot/Simple Metal RevD/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h b/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h index c4ee2c2ffe..7a6ea2834a 100644 --- a/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h +++ b/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Printrbot/Simple_Metal_RevF6/Configuration.h b/config/examples/Printrbot/Simple_Metal_RevF6/Configuration.h index b1743afcca..998db2a2d5 100644 --- a/config/examples/Printrbot/Simple_Metal_RevF6/Configuration.h +++ b/config/examples/Printrbot/Simple_Metal_RevF6/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Printrbot/Simple_Metal_RevF6/Configuration_adv.h b/config/examples/Printrbot/Simple_Metal_RevF6/Configuration_adv.h index d01092d831..27c8ca0704 100644 --- a/config/examples/Printrbot/Simple_Metal_RevF6/Configuration_adv.h +++ b/config/examples/Printrbot/Simple_Metal_RevF6/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Prusa/MK3/Configuration.h b/config/examples/Prusa/MK3/Configuration.h index d957a47805..8ce8028e12 100644 --- a/config/examples/Prusa/MK3/Configuration.h +++ b/config/examples/Prusa/MK3/Configuration.h @@ -496,7 +496,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -685,6 +685,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 10 @@ -1899,15 +1901,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1920,8 +1919,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2576,7 +2573,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Prusa/MK3/Configuration_adv.h b/config/examples/Prusa/MK3/Configuration_adv.h index 88a397d18d..bfbf6131c7 100644 --- a/config/examples/Prusa/MK3/Configuration_adv.h +++ b/config/examples/Prusa/MK3/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2605,13 +2608,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2643,6 +2648,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2849,7 +2856,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h index ae0bc90249..b3f12d4ab9 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h @@ -489,7 +489,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -678,6 +678,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1890,15 +1892,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1911,8 +1910,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2567,7 +2564,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index 4530430b8c..c0d14ef808 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Qidi/Qidi 1/Configuration.h b/config/examples/Qidi/Qidi 1/Configuration.h index 586bbcf887..08898535df 100644 --- a/config/examples/Qidi/Qidi 1/Configuration.h +++ b/config/examples/Qidi/Qidi 1/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index 17dc7ac4d4..da9664a17c 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Raiscube/A8r/Configuration.h b/config/examples/Raiscube/A8r/Configuration.h index b9c7c527f6..20bf6c568d 100644 --- a/config/examples/Raiscube/A8r/Configuration.h +++ b/config/examples/Raiscube/A8r/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1908,15 +1910,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1929,8 +1928,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2582,7 +2579,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Raiscube/A8r/Configuration_adv.h b/config/examples/Raiscube/A8r/Configuration_adv.h index 3c69a0fb77..25356d0657 100644 --- a/config/examples/Raiscube/A8r/Configuration_adv.h +++ b/config/examples/Raiscube/A8r/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index c3e41fd6c4..86dc3132f4 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index 50258c850a..965f951a11 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Renkforce/RF100/Configuration.h b/config/examples/Renkforce/RF100/Configuration.h index 7f2c483bab..33124be09a 100644 --- a/config/examples/Renkforce/RF100/Configuration.h +++ b/config/examples/Renkforce/RF100/Configuration.h @@ -481,7 +481,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -666,6 +666,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1875,15 +1877,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1896,8 +1895,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2548,7 +2545,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index 419d45480a..d20c704e2b 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Renkforce/RF100XL/Configuration.h b/config/examples/Renkforce/RF100XL/Configuration.h index f181a69427..302d089106 100644 --- a/config/examples/Renkforce/RF100XL/Configuration.h +++ b/config/examples/Renkforce/RF100XL/Configuration.h @@ -481,7 +481,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -666,6 +666,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1875,15 +1877,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1896,8 +1895,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2548,7 +2545,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index 419d45480a..d20c704e2b 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Renkforce/RF100v2/Configuration.h b/config/examples/Renkforce/RF100v2/Configuration.h index b0fbae33d8..bad686b72b 100644 --- a/config/examples/Renkforce/RF100v2/Configuration.h +++ b/config/examples/Renkforce/RF100v2/Configuration.h @@ -481,7 +481,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -666,6 +666,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1875,15 +1877,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1896,8 +1895,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2548,7 +2545,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index 419d45480a..d20c704e2b 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index 1acba7ac07..4a9bba0318 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1911,15 +1913,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1932,8 +1931,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2593,7 +2590,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/RepRapPro/Huxley/Configuration_adv.h b/config/examples/RepRapPro/Huxley/Configuration_adv.h index c4ee2c2ffe..7a6ea2834a 100644 --- a/config/examples/RepRapPro/Huxley/Configuration_adv.h +++ b/config/examples/RepRapPro/Huxley/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index d0e92a1d63..fd38a496f9 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/RepRapWorld/Megatronics/Configuration_adv.h b/config/examples/RepRapWorld/Megatronics/Configuration_adv.h index 0f6992319c..e99e64c13e 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration_adv.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/RepRapWorld/Minitronics11/Configuration.h b/config/examples/RepRapWorld/Minitronics11/Configuration.h index 3094a679e5..bb214e3864 100644 --- a/config/examples/RepRapWorld/Minitronics11/Configuration.h +++ b/config/examples/RepRapWorld/Minitronics11/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/RepRapWorld/Minitronics11/Configuration_adv.h b/config/examples/RepRapWorld/Minitronics11/Configuration_adv.h index 9c4ce421c8..619f19b280 100644 --- a/config/examples/RepRapWorld/Minitronics11/Configuration_adv.h +++ b/config/examples/RepRapWorld/Minitronics11/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h index d1dde26618..75c3a9649a 100644 --- a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h +++ b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h index 72f0d0507e..fd43594c0f 100644 --- a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h +++ b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index ffc83e6447..f94436a30d 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -479,7 +479,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -664,6 +664,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1884,15 +1886,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1905,8 +1904,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2557,7 +2554,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 96af6aaebf..ccad4b8acf 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Robo3D/R1+/Configuration.h b/config/examples/Robo3D/R1+/Configuration.h index ef15ecc4cc..4aba77eb46 100644 --- a/config/examples/Robo3D/R1+/Configuration.h +++ b/config/examples/Robo3D/R1+/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Robo3D/R1+/Configuration_adv.h b/config/examples/Robo3D/R1+/Configuration_adv.h index c4ee2c2ffe..7a6ea2834a 100644 --- a/config/examples/Robo3D/R1+/Configuration_adv.h +++ b/config/examples/Robo3D/R1+/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Rolohaun/Rook MK1/Configuration.h b/config/examples/Rolohaun/Rook MK1/Configuration.h index 9b7eb43483..05b447a2ff 100644 --- a/config/examples/Rolohaun/Rook MK1/Configuration.h +++ b/config/examples/Rolohaun/Rook MK1/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true // BMG mounted upside down so lever is accessible #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Rolohaun/Rook MK1/Configuration_adv.h b/config/examples/Rolohaun/Rook MK1/Configuration_adv.h index dda145b576..97764dabea 100644 --- a/config/examples/Rolohaun/Rook MK1/Configuration_adv.h +++ b/config/examples/Rolohaun/Rook MK1/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 10*60, 6*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/SCARA/MP_SCARA/Configuration.h b/config/examples/SCARA/MP_SCARA/Configuration.h index db77021711..df44fe4033 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration.h +++ b/config/examples/SCARA/MP_SCARA/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1872,15 +1874,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1893,8 +1892,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2545,7 +2542,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index 730f294c39..77d7bc2ac1 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 10*60, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/SCARA/Morgan/Configuration.h b/config/examples/SCARA/Morgan/Configuration.h index 5ab0ed60f7..0dee7f5494 100644 --- a/config/examples/SCARA/Morgan/Configuration.h +++ b/config/examples/SCARA/Morgan/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index 026bfc4376..5d639ec35d 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 10*60, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index 2c92920cbb..4a88f8efc9 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index 4c4e500223..2fd733c443 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/STM32/STM32F103RE/Configuration.h b/config/examples/STM32/STM32F103RE/Configuration.h index 4d72dfb18c..722f6828f4 100644 --- a/config/examples/STM32/STM32F103RE/Configuration.h +++ b/config/examples/STM32/STM32F103RE/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // #define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/STM32/STM32F103RE/Configuration_adv.h b/config/examples/STM32/STM32F103RE/Configuration_adv.h index c4ee2c2ffe..7a6ea2834a 100644 --- a/config/examples/STM32/STM32F103RE/Configuration_adv.h +++ b/config/examples/STM32/STM32F103RE/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Simax/Mi-M200/Configuration.h b/config/examples/Simax/Mi-M200/Configuration.h index 98b0449cda..2ca9bf2ab0 100644 --- a/config/examples/Simax/Mi-M200/Configuration.h +++ b/config/examples/Simax/Mi-M200/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Simax/Mi-M200/Configuration_adv.h b/config/examples/Simax/Mi-M200/Configuration_adv.h index 51f6546beb..8e9d8ac7ca 100644 --- a/config/examples/Simax/Mi-M200/Configuration_adv.h +++ b/config/examples/Simax/Mi-M200/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Simulator/Configuration.h b/config/examples/Simulator/Configuration.h index 965293813c..934fe81ad3 100644 --- a/config/examples/Simulator/Configuration.h +++ b/config/examples/Simulator/Configuration.h @@ -492,7 +492,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -677,6 +677,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1886,15 +1888,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1907,8 +1906,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2559,7 +2556,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Simulator/Configuration_adv.h b/config/examples/Simulator/Configuration_adv.h index 84347c0147..9d578d4d8e 100644 --- a/config/examples/Simulator/Configuration_adv.h +++ b/config/examples/Simulator/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // #define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h index 7e18b6b71b..f45747d64a 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h @@ -483,7 +483,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -668,6 +668,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1880,15 +1882,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1901,8 +1900,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2558,7 +2555,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 4ae0930324..ed69376399 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h index eaf28897a4..00bea2f570 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -480,7 +480,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -665,6 +665,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1878,15 +1880,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1899,8 +1898,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2556,7 +2553,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index b50fdd244b..7e6d7db59d 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h index 46040a819a..07c60533e1 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -481,7 +481,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -666,6 +666,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1880,15 +1882,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1901,8 +1900,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2558,7 +2555,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index ccdbe53a62..0d8c2a5336 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h index d676ae3f48..94164cd60e 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h @@ -480,7 +480,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -665,6 +665,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1877,15 +1879,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1898,8 +1897,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2555,7 +2552,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h index 8a62197eb6..b5f58e60f3 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h @@ -1523,6 +1523,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2348,7 +2351,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2605,13 +2608,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2643,6 +2648,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2849,7 +2856,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h index 5a66ac0bc4..5672d98e6a 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h @@ -480,7 +480,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -665,6 +665,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1877,15 +1879,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1898,8 +1897,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2555,7 +2552,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h index d130bb4d15..80b0e4d893 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h @@ -1523,6 +1523,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2348,7 +2351,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2605,13 +2608,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2643,6 +2648,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2849,7 +2856,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Sovol/SV-02/Configuration.h b/config/examples/Sovol/SV-02/Configuration.h index 8c2596a9ec..97ebba1f75 100644 --- a/config/examples/Sovol/SV-02/Configuration.h +++ b/config/examples/Sovol/SV-02/Configuration.h @@ -480,7 +480,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -665,6 +665,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1877,15 +1879,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1898,8 +1897,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2555,7 +2552,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Sovol/SV-02/Configuration_adv.h b/config/examples/Sovol/SV-02/Configuration_adv.h index b20599f543..9c44c70026 100644 --- a/config/examples/Sovol/SV-02/Configuration_adv.h +++ b/config/examples/Sovol/SV-02/Configuration_adv.h @@ -1523,6 +1523,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2348,7 +2351,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2605,13 +2608,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2643,6 +2648,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2849,7 +2856,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Sovol/SV-03/Configuration.h b/config/examples/Sovol/SV-03/Configuration.h index a7070e4c40..6292768719 100644 --- a/config/examples/Sovol/SV-03/Configuration.h +++ b/config/examples/Sovol/SV-03/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Sovol/SV-03/Configuration_adv.h b/config/examples/Sovol/SV-03/Configuration_adv.h index ea8b02a6e2..a0377a4761 100644 --- a/config/examples/Sovol/SV-03/Configuration_adv.h +++ b/config/examples/Sovol/SV-03/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Sovol/SV-05/Configuration.h b/config/examples/Sovol/SV-05/Configuration.h index f64156238d..e58fc12838 100644 --- a/config/examples/Sovol/SV-05/Configuration.h +++ b/config/examples/Sovol/SV-05/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Sovol/SV-05/Configuration_adv.h b/config/examples/Sovol/SV-05/Configuration_adv.h index 372909530c..0e55c491f9 100644 --- a/config/examples/Sovol/SV-05/Configuration_adv.h +++ b/config/examples/Sovol/SV-05/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Sovol/SV-06 Plus/Configuration.h b/config/examples/Sovol/SV-06 Plus/Configuration.h index 286ca15186..16df620ec2 100644 --- a/config/examples/Sovol/SV-06 Plus/Configuration.h +++ b/config/examples/Sovol/SV-06 Plus/Configuration.h @@ -481,7 +481,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -666,6 +666,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1874,15 +1876,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1895,8 +1894,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2547,7 +2544,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Sovol/SV-06 Plus/Configuration_adv.h b/config/examples/Sovol/SV-06 Plus/Configuration_adv.h index 74aead4920..a8ea771430 100644 --- a/config/examples/Sovol/SV-06 Plus/Configuration_adv.h +++ b/config/examples/Sovol/SV-06 Plus/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // #define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Sovol/SV-06/Configuration.h b/config/examples/Sovol/SV-06/Configuration.h index 6c16c61495..9539e9549f 100644 --- a/config/examples/Sovol/SV-06/Configuration.h +++ b/config/examples/Sovol/SV-06/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Sovol/SV-06/Configuration_adv.h b/config/examples/Sovol/SV-06/Configuration_adv.h index 3cc334b10b..f858cbab24 100644 --- a/config/examples/Sovol/SV-06/Configuration_adv.h +++ b/config/examples/Sovol/SV-06/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // #define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Sunlu/S8/Configuration.h b/config/examples/Sunlu/S8/Configuration.h index 2e180eecdc..88b0c69313 100644 --- a/config/examples/Sunlu/S8/Configuration.h +++ b/config/examples/Sunlu/S8/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Sunlu/S8/Configuration_adv.h b/config/examples/Sunlu/S8/Configuration_adv.h index b8465fa2ee..d728f48e35 100644 --- a/config/examples/Sunlu/S8/Configuration_adv.h +++ b/config/examples/Sunlu/S8/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Sunlu/T3/Configuration.h b/config/examples/Sunlu/T3/Configuration.h index d96b2094d1..4d84402590 100644 --- a/config/examples/Sunlu/T3/Configuration.h +++ b/config/examples/Sunlu/T3/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Sunlu/T3/Configuration_adv.h b/config/examples/Sunlu/T3/Configuration_adv.h index e4c28aece2..50e1646e94 100644 --- a/config/examples/Sunlu/T3/Configuration_adv.h +++ b/config/examples/Sunlu/T3/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration.h b/config/examples/TPARA/AXEL_TPARA/Configuration.h index 67fa03a02f..16e99039a2 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1877,15 +1879,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1898,8 +1897,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2561,7 +2558,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h index 1ca2ac0569..201dfec469 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h @@ -1523,6 +1523,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 10*60, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2348,7 +2351,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2605,13 +2608,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2643,6 +2648,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2849,7 +2856,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h index b8c43d7ee1..8dbf0ce010 100644 --- a/config/examples/Tevo/Michelangelo/Configuration.h +++ b/config/examples/Tevo/Michelangelo/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index ed66934420..cfbbca0e8b 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Tevo/Nereus/Configuration.h b/config/examples/Tevo/Nereus/Configuration.h index caceffef89..a60886e46f 100644 --- a/config/examples/Tevo/Nereus/Configuration.h +++ b/config/examples/Tevo/Nereus/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index 02eb8c3922..1ffe433bfc 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h index 37f2c7b617..6e451c12d8 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h index 5c3e9f2399..a38145d677 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h index a9380c47dc..c7585c1810 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h index 432fcf5023..62cb2acf20 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h index b69ad97e34..4d6482a650 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index 932320a792..f8ea061543 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h index 123b92bc2f..4bb7305a14 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h +++ b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h index 932320a792..f8ea061543 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h index bd2a9ede63..6a8d9a6191 100644 --- a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h +++ b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h index 117aa87f82..07666512dc 100644 --- a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h +++ b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index d55361caec..4347312dac 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -499,7 +499,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -689,6 +689,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1910,15 +1912,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1931,8 +1930,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2588,7 +2585,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index 940b9185f1..384ebe36d2 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h index e74c30554c..e9efae67ca 100644 --- a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h +++ b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1879,15 +1881,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1900,8 +1899,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2552,7 +2549,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h index 63875096b0..2a0b95c8e6 100644 --- a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h +++ b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index 348d763aef..c4b9760403 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Tronxy/X1/Configuration_adv.h b/config/examples/Tronxy/X1/Configuration_adv.h index c4ee2c2ffe..7a6ea2834a 100644 --- a/config/examples/Tronxy/X1/Configuration_adv.h +++ b/config/examples/Tronxy/X1/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index e90bec8790..d63c85b96a 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2547,7 +2544,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index 3d1ea2e56e..91b13c7a61 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h index 4d7a7dfe1d..8ed0943c15 100644 --- a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h index 777a26b6cc..292ef2b0e4 100644 --- a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h index cd1f2bb1fe..7b3379a84b 100644 --- a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h @@ -481,7 +481,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -666,6 +666,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1879,15 +1881,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1900,8 +1899,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2552,7 +2549,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h index 96b1388133..0492798d6b 100644 --- a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index ab37492116..f86c7d97f0 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Tronxy/X5S/Configuration_adv.h b/config/examples/Tronxy/X5S/Configuration_adv.h index c4ee2c2ffe..7a6ea2834a 100644 --- a/config/examples/Tronxy/X5S/Configuration_adv.h +++ b/config/examples/Tronxy/X5S/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Tronxy/X5SA Pro/Configuration.h b/config/examples/Tronxy/X5SA Pro/Configuration.h index a9539abef8..bd9eb34fac 100644 --- a/config/examples/Tronxy/X5SA Pro/Configuration.h +++ b/config/examples/Tronxy/X5SA Pro/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1861,15 +1863,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1882,8 +1881,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2534,7 +2531,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Tronxy/X5SA Pro/Configuration_adv.h b/config/examples/Tronxy/X5SA Pro/Configuration_adv.h index 1d71249e5a..b0dd44be20 100644 --- a/config/examples/Tronxy/X5SA Pro/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA Pro/Configuration_adv.h @@ -1535,6 +1535,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2364,7 +2367,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2622,13 +2625,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2660,6 +2665,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2866,7 +2873,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Tronxy/X5SA-2E/Configuration.h b/config/examples/Tronxy/X5SA-2E/Configuration.h index d4f8a1da87..f7a02b9dc9 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1872,15 +1874,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1893,8 +1892,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2545,7 +2542,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h index ba72e49d28..a200caef1a 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h @@ -473,6 +473,11 @@ #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING #endif #endif + #if ENABLED(PID_PARAMS_PER_HOTEND) + // Specify up to one value per hotend here, according to your setup. + // If there are fewer values, the last one applies to the remaining hotends. + #define DEFAULT_KF_LIST { DEFAULT_KF, DEFAULT_KF } + #endif #endif /** @@ -1521,7 +1526,10 @@ // @section lcd -#if ANY(IS_ULTIPANEL, EXTENSIBLE_UI) +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + +#if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines #if IS_ULTIPANEL @@ -2350,7 +2358,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2607,13 +2615,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2645,6 +2655,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2851,7 +2863,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Tronxy/X5SA/Configuration.h b/config/examples/Tronxy/X5SA/Configuration.h index 70d36c3e02..4283a4fd8f 100644 --- a/config/examples/Tronxy/X5SA/Configuration.h +++ b/config/examples/Tronxy/X5SA/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1872,15 +1874,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1893,8 +1892,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2545,7 +2542,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index d52bf7bfd0..81d193b6a2 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2350,7 +2353,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2607,13 +2610,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2645,6 +2650,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2851,7 +2858,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index afe48b614a..851a2cecd7 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1877,15 +1879,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1898,8 +1897,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2550,7 +2547,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Tronxy/XY100/Configuration_adv.h b/config/examples/Tronxy/XY100/Configuration_adv.h index c4ee2c2ffe..7a6ea2834a 100644 --- a/config/examples/Tronxy/XY100/Configuration_adv.h +++ b/config/examples/Tronxy/XY100/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Tronxy/XY2-Pro/Configuration.h b/config/examples/Tronxy/XY2-Pro/Configuration.h index aba8489f6d..7fce6ff5cd 100644 --- a/config/examples/Tronxy/XY2-Pro/Configuration.h +++ b/config/examples/Tronxy/XY2-Pro/Configuration.h @@ -512,7 +512,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -697,6 +697,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1906,15 +1908,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1927,8 +1926,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2578,7 +2575,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Tronxy/XY2-Pro/Configuration_adv.h b/config/examples/Tronxy/XY2-Pro/Configuration_adv.h index 25fc2ed911..2c00da6aab 100644 --- a/config/examples/Tronxy/XY2-Pro/Configuration_adv.h +++ b/config/examples/Tronxy/XY2-Pro/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Turnigy/Fabrikator/Configuration.h b/config/examples/Turnigy/Fabrikator/Configuration.h index bcb8e3d3d0..4945ca8996 100644 --- a/config/examples/Turnigy/Fabrikator/Configuration.h +++ b/config/examples/Turnigy/Fabrikator/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Turnigy/Fabrikator/Configuration_adv.h b/config/examples/Turnigy/Fabrikator/Configuration_adv.h index 130257bac2..0361d14b90 100644 --- a/config/examples/Turnigy/Fabrikator/Configuration_adv.h +++ b/config/examples/Turnigy/Fabrikator/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Two Trees/BlueR Plus/Configuration.h b/config/examples/Two Trees/BlueR Plus/Configuration.h index d4d04741c1..9d190f9e89 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1872,15 +1874,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1893,8 +1892,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true @@ -2546,7 +2543,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h index 332b556e16..fef5aac09f 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2602,13 +2605,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2640,6 +2645,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2846,7 +2853,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h index 4f7ae6874d..7a83ccd26f 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h @@ -490,7 +490,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -675,6 +675,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1889,15 +1891,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1914,8 +1913,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #if ENABLED(BLUER_TMC2209) #define INVERT_E0_DIR false @@ -2574,7 +2571,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h index a7524e7136..1d9365f547 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h index 6e82575222..9cdd60c19e 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h @@ -491,7 +491,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -676,6 +676,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1890,15 +1892,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1915,8 +1914,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #if ALL(BLUER_INVERTED_E, BLUER_TMC2209) #define INVERT_E0_DIR false @@ -2575,7 +2572,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h index a7524e7136..1d9365f547 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h index eb41e0bda6..a6bab55826 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h @@ -498,7 +498,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -683,6 +683,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1901,15 +1903,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1926,8 +1925,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #if ENABLED(BLUER_TMC2209) #define INVERT_E0_DIR false @@ -2586,7 +2583,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h index a7524e7136..1d9365f547 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Two Trees/SP-5_V3/Configuration.h b/config/examples/Two Trees/SP-5_V3/Configuration.h index caf7660b24..88c638652a 100644 --- a/config/examples/Two Trees/SP-5_V3/Configuration.h +++ b/config/examples/Two Trees/SP-5_V3/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Two Trees/SP-5_V3/Configuration_adv.h b/config/examples/Two Trees/SP-5_V3/Configuration_adv.h index 0cf214e6ef..61e1773a77 100644 --- a/config/examples/Two Trees/SP-5_V3/Configuration_adv.h +++ b/config/examples/Two Trees/SP-5_V3/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h index 0598c70ca5..405a7d0167 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h @@ -483,7 +483,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -668,6 +668,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1899,15 +1901,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1920,8 +1919,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2581,7 +2578,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h index 1e745f7228..ece1ad7392 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h @@ -1527,6 +1527,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2352,7 +2355,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2609,13 +2612,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2647,6 +2652,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2853,7 +2860,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h index 6cdd04b7fc..8ba2fdaf25 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h @@ -483,7 +483,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -668,6 +668,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1899,15 +1901,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1920,8 +1919,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2581,7 +2578,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h index 8450ce4102..0fce576c60 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h @@ -1527,6 +1527,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2352,7 +2355,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2609,13 +2612,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2647,6 +2652,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2853,7 +2860,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration.h b/config/examples/Two Trees/Sapphire Pro/Configuration.h index 26f74ea7fd..422512043c 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration.h @@ -491,7 +491,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -676,6 +676,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1887,15 +1889,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1912,8 +1911,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #if ENABLED(SPRO_INVERTED_E) && DISABLED(SPRO_TMC2209) #define INVERT_E0_DIR false @@ -2573,7 +2570,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h index 3d69eedb8e..ff3bbd53b0 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.001 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index 549db62172..bdb5cff928 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index c05e5b3c70..3d107bb70c 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index 35613ee219..bc01e49aca 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index 95c77d066b..c5d01c8b36 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Ultimaker/Ultimaker 2+/Configuration.h b/config/examples/Ultimaker/Ultimaker 2+/Configuration.h index aefc45b1ca..056485c25b 100644 --- a/config/examples/Ultimaker/Ultimaker 2+/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker 2+/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1873,15 +1875,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1894,8 +1893,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2546,7 +2543,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h index d90128d5c2..2cfc8d4b11 100644 --- a/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 50*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration.h b/config/examples/Ultimaker/Ultimaker 2/Configuration.h index db6a6b30e0..6268d2a438 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration.h @@ -480,7 +480,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -665,6 +665,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1885,15 +1887,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1906,8 +1905,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. // UM2 #define INVERT_E0_DIR false @@ -2560,7 +2557,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h index c298450b07..78ca086c92 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 100*60, 100*60, 40*60, 6*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h index d3bf73e15c..67e8a53608 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h index 589b841b2c..bd5c42aed9 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h index 45bd8cdf20..b69f628bed 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1873,15 +1875,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1894,8 +1893,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2546,7 +2543,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h index 9c40d5def3..ad22fa301f 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 50*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h index 9e3c2f68af..4e83bd47cb 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1874,15 +1876,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1895,8 +1894,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2547,7 +2544,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h index 3538407b19..8fcfd9b112 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h @@ -1519,6 +1519,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 50*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2344,7 +2347,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2601,13 +2604,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // #define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2639,6 +2644,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2845,7 +2852,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index 04b4378cc6..534024ebd7 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index e9097816aa..13f4b295d5 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Velleman/K8200 Upgraded/Configuration.h b/config/examples/Velleman/K8200 Upgraded/Configuration.h index 006794eeb0..0d60693d03 100644 --- a/config/examples/Velleman/K8200 Upgraded/Configuration.h +++ b/config/examples/Velleman/K8200 Upgraded/Configuration.h @@ -503,7 +503,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -688,6 +688,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1903,15 +1905,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1924,8 +1923,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true // K8200: true for geared default extruder! #define INVERT_E1_DIR true @@ -2577,7 +2574,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h index 57316530f0..b58a803f17 100644 --- a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h +++ b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h @@ -1534,6 +1534,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2359,7 +2362,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2616,13 +2619,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2654,6 +2659,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2858,7 +2865,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index 46934c13ef..a43891c254 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -505,7 +505,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -690,6 +690,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1905,15 +1907,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1926,8 +1925,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true // K8200: true for geared default extruder! #define INVERT_E1_DIR true @@ -2579,7 +2576,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index 61de62758e..2931e593e3 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -1534,6 +1534,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2359,7 +2362,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2616,13 +2619,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2654,6 +2659,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2860,7 +2867,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index 134323ab9a..cad75f6b06 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR true @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index 290302b01f..683d5055ce 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Velleman/K8400/Single-head/Configuration.h b/config/examples/Velleman/K8400/Single-head/Configuration.h index 06135b9a0e..54abc44ab7 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR true @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index 290302b01f..683d5055ce 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h index 9cf2e75552..6d76545c21 100644 --- a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index df603cb376..eb4f82459f 100644 --- a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index 6f81e8587d..1007e57759 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -490,7 +490,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -675,6 +675,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1884,15 +1886,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1905,8 +1904,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2557,7 +2554,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index a4843bf9ae..9edbf5c9a1 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration.h b/config/examples/Wanhao/Duplicator 4S/Configuration.h index f583d5211c..34a8aad8f2 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index 4d26fc5f13..02dabb718f 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index cee5dc5492..58a3025690 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 667ca97ab3..e4b9ab1009 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -1523,6 +1523,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 70*60, 70*60, 15*60, 6*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2348,7 +2351,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2605,13 +2608,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2643,6 +2648,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2849,7 +2856,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Wanhao/Duplicator 9/MK1/300/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK1/300/Configuration.h index 3eb5c3cc73..055e37532d 100644 --- a/config/examples/Wanhao/Duplicator 9/MK1/300/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK1/300/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Wanhao/Duplicator 9/MK1/300/Configuration_adv.h b/config/examples/Wanhao/Duplicator 9/MK1/300/Configuration_adv.h index 87c1e58253..f57427e5bb 100644 --- a/config/examples/Wanhao/Duplicator 9/MK1/300/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 9/MK1/300/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2600,13 +2603,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2638,6 +2643,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2844,7 +2851,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Wanhao/Duplicator 9/MK1/400/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK1/400/Configuration.h index 0aec49dac8..9bd904ddc3 100644 --- a/config/examples/Wanhao/Duplicator 9/MK1/400/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK1/400/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Wanhao/Duplicator 9/MK1/400/Configuration_adv.h b/config/examples/Wanhao/Duplicator 9/MK1/400/Configuration_adv.h index 87c1e58253..f57427e5bb 100644 --- a/config/examples/Wanhao/Duplicator 9/MK1/400/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 9/MK1/400/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2600,13 +2603,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2638,6 +2643,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2844,7 +2851,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Wanhao/Duplicator 9/MK1/500/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK1/500/Configuration.h index 01b97bfa16..196e22ddb1 100644 --- a/config/examples/Wanhao/Duplicator 9/MK1/500/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK1/500/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Wanhao/Duplicator 9/MK1/500/Configuration_adv.h b/config/examples/Wanhao/Duplicator 9/MK1/500/Configuration_adv.h index cbf08f1df9..0e0e490de1 100644 --- a/config/examples/Wanhao/Duplicator 9/MK1/500/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 9/MK1/500/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2600,13 +2603,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2638,6 +2643,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2844,7 +2851,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Wanhao/Duplicator 9/MK1u2/300/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK1u2/300/Configuration.h index 7b88a4dadb..1f0d3c4459 100644 --- a/config/examples/Wanhao/Duplicator 9/MK1u2/300/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK1u2/300/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Wanhao/Duplicator 9/MK1u2/300/Configuration_adv.h b/config/examples/Wanhao/Duplicator 9/MK1u2/300/Configuration_adv.h index cbf08f1df9..0e0e490de1 100644 --- a/config/examples/Wanhao/Duplicator 9/MK1u2/300/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 9/MK1u2/300/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2600,13 +2603,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2638,6 +2643,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2844,7 +2851,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Wanhao/Duplicator 9/MK1u2/400/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK1u2/400/Configuration.h index 66545ca1a0..e5e6a9cc06 100644 --- a/config/examples/Wanhao/Duplicator 9/MK1u2/400/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK1u2/400/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Wanhao/Duplicator 9/MK1u2/400/Configuration_adv.h b/config/examples/Wanhao/Duplicator 9/MK1u2/400/Configuration_adv.h index cbf08f1df9..0e0e490de1 100644 --- a/config/examples/Wanhao/Duplicator 9/MK1u2/400/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 9/MK1u2/400/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2600,13 +2603,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2638,6 +2643,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2844,7 +2851,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Wanhao/Duplicator 9/MK1u2/500/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK1u2/500/Configuration.h index 1f4e6e5dba..a55ca32ace 100644 --- a/config/examples/Wanhao/Duplicator 9/MK1u2/500/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK1u2/500/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Wanhao/Duplicator 9/MK1u2/500/Configuration_adv.h b/config/examples/Wanhao/Duplicator 9/MK1u2/500/Configuration_adv.h index cbf08f1df9..0e0e490de1 100644 --- a/config/examples/Wanhao/Duplicator 9/MK1u2/500/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 9/MK1u2/500/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2600,13 +2603,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2638,6 +2643,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2844,7 +2851,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Wanhao/Duplicator 9/MK2/300/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK2/300/Configuration.h index 7a3d491530..6746cd148b 100644 --- a/config/examples/Wanhao/Duplicator 9/MK2/300/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK2/300/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Wanhao/Duplicator 9/MK2/300/Configuration_adv.h b/config/examples/Wanhao/Duplicator 9/MK2/300/Configuration_adv.h index cbf08f1df9..0e0e490de1 100644 --- a/config/examples/Wanhao/Duplicator 9/MK2/300/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 9/MK2/300/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2600,13 +2603,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2638,6 +2643,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2844,7 +2851,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Wanhao/Duplicator 9/MK2/400/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK2/400/Configuration.h index 5109f8adc7..f50f845a80 100644 --- a/config/examples/Wanhao/Duplicator 9/MK2/400/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK2/400/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Wanhao/Duplicator 9/MK2/400/Configuration_adv.h b/config/examples/Wanhao/Duplicator 9/MK2/400/Configuration_adv.h index cbf08f1df9..0e0e490de1 100644 --- a/config/examples/Wanhao/Duplicator 9/MK2/400/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 9/MK2/400/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2600,13 +2603,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2638,6 +2643,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2844,7 +2851,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Wanhao/Duplicator 9/MK2/500/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK2/500/Configuration.h index fe9b5488fe..97f6b4c5cb 100644 --- a/config/examples/Wanhao/Duplicator 9/MK2/500/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK2/500/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Wanhao/Duplicator 9/MK2/500/Configuration_adv.h b/config/examples/Wanhao/Duplicator 9/MK2/500/Configuration_adv.h index cbf08f1df9..0e0e490de1 100644 --- a/config/examples/Wanhao/Duplicator 9/MK2/500/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 9/MK2/500/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2600,13 +2603,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2638,6 +2643,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2844,7 +2851,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Wanhao/Duplicator 9/MK3/300/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK3/300/Configuration.h index 2b4c90d7de..4eaeb6c638 100644 --- a/config/examples/Wanhao/Duplicator 9/MK3/300/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK3/300/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Wanhao/Duplicator 9/MK3/300/Configuration_adv.h b/config/examples/Wanhao/Duplicator 9/MK3/300/Configuration_adv.h index cbf08f1df9..0e0e490de1 100644 --- a/config/examples/Wanhao/Duplicator 9/MK3/300/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 9/MK3/300/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2600,13 +2603,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2638,6 +2643,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2844,7 +2851,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Wanhao/Duplicator 9/MK3/400/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK3/400/Configuration.h index 759e046f23..22eb0445ec 100644 --- a/config/examples/Wanhao/Duplicator 9/MK3/400/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK3/400/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Wanhao/Duplicator 9/MK3/400/Configuration_adv.h b/config/examples/Wanhao/Duplicator 9/MK3/400/Configuration_adv.h index cbf08f1df9..0e0e490de1 100644 --- a/config/examples/Wanhao/Duplicator 9/MK3/400/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 9/MK3/400/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2600,13 +2603,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2638,6 +2643,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2844,7 +2851,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Wanhao/Duplicator 9/MK3/500/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK3/500/Configuration.h index 095fd96126..bcb42b0874 100644 --- a/config/examples/Wanhao/Duplicator 9/MK3/500/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK3/500/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Wanhao/Duplicator 9/MK3/500/Configuration_adv.h b/config/examples/Wanhao/Duplicator 9/MK3/500/Configuration_adv.h index cbf08f1df9..0e0e490de1 100644 --- a/config/examples/Wanhao/Duplicator 9/MK3/500/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 9/MK3/500/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2600,13 +2603,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2638,6 +2643,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2844,7 +2851,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h index 7ee2ad751f..bc4ca3cd11 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index 936644d40d..0fd437200c 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h index 8a8bb852ba..09dd1ac13d 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index ea78607ceb..6a8e5ad9d3 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h index fc6c11b868..2e7e2b2d28 100644 --- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h index c4ee2c2ffe..7a6ea2834a 100644 --- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Weedo/Tina2/V2/Configuration.h b/config/examples/Weedo/Tina2/V2/Configuration.h index 7ceb7895af..e2672a6f5d 100644 --- a/config/examples/Weedo/Tina2/V2/Configuration.h +++ b/config/examples/Weedo/Tina2/V2/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Weedo/Tina2/V2/Configuration_adv.h b/config/examples/Weedo/Tina2/V2/Configuration_adv.h index 86ed381c92..cb5fe69aa8 100644 --- a/config/examples/Weedo/Tina2/V2/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V2/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Weedo/Tina2/V3/Configuration.h b/config/examples/Weedo/Tina2/V3/Configuration.h index 85fc704cf7..f0edf13536 100644 --- a/config/examples/Weedo/Tina2/V3/Configuration.h +++ b/config/examples/Weedo/Tina2/V3/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1870,15 +1872,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1891,8 +1890,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2543,7 +2540,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Weedo/Tina2/V3/Configuration_adv.h b/config/examples/Weedo/Tina2/V3/Configuration_adv.h index 86ed381c92..cb5fe69aa8 100644 --- a/config/examples/Weedo/Tina2/V3/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V3/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Weistek/wt150/Configuration.h b/config/examples/Weistek/wt150/Configuration.h index 789a74c0d9..6487e25317 100644 --- a/config/examples/Weistek/wt150/Configuration.h +++ b/config/examples/Weistek/wt150/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index 37bda4e20c..08869963b7 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Zonestar/P802M/Configuration.h b/config/examples/Zonestar/P802M/Configuration.h index 3419b1653f..73a4cbb0a6 100644 --- a/config/examples/Zonestar/P802M/Configuration.h +++ b/config/examples/Zonestar/P802M/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1871,15 +1873,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1892,8 +1891,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2544,7 +2541,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index c69616a662..0ad9d2fce3 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h index 29515fb6e2..c7bcf5a276 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h @@ -479,7 +479,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -664,6 +664,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1875,15 +1877,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1896,8 +1895,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2548,7 +2545,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h index 7e9f001512..631ce898d5 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h index 5804d76f23..d5ce9d3c35 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h @@ -479,7 +479,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -664,6 +664,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1874,15 +1876,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1895,8 +1894,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2547,7 +2544,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h index eb09a17a75..de0f630cc2 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h index 7a2b3bbc4f..91001d440b 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h @@ -493,7 +493,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -682,6 +682,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1943,15 +1945,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1964,8 +1963,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2619,7 +2616,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index 415cd4e4a6..cef03670d5 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE_XYZ 50*60 #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index b460ad082d..982a6bf70d 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -493,7 +493,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -682,6 +682,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1939,15 +1941,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1960,8 +1959,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2615,7 +2612,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index a7bce46277..a51bcb9313 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE_XYZ 50*60 #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/delta/Anycubic/Predator/Configuration.h b/config/examples/delta/Anycubic/Predator/Configuration.h index 198a956ed3..85ac451d32 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration.h +++ b/config/examples/delta/Anycubic/Predator/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1878,15 +1880,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1899,8 +1898,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2551,7 +2548,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index 33b4857c76..8bab273c60 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -1523,6 +1523,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE_XYZ 50*60 #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel @@ -2349,7 +2352,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2606,13 +2609,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2644,6 +2649,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2850,7 +2857,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h index d35e194515..4feaa8f8d5 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -661,6 +661,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1877,15 +1879,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1898,8 +1897,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2551,7 +2548,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index 4164bc82e5..b7f04d7db2 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE_XYZ 50*60 #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h index a02736e052..ab2577c815 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h @@ -480,7 +480,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -668,6 +668,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1884,15 +1886,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1905,8 +1904,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2557,7 +2554,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index 4164bc82e5..b7f04d7db2 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE_XYZ 50*60 #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h index f604925b0a..91022ce7d7 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1879,15 +1881,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1900,8 +1899,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2553,7 +2550,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h index 0e1200c461..974e33eed0 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE_XYZ 35*60 #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h index 1efebd4fc8..0648e34300 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1877,15 +1879,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1898,8 +1897,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2550,7 +2547,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h index c4ee2c2ffe..7a6ea2834a 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration.h b/config/examples/delta/FLSUN/QQ-S/Configuration.h index d0dad87d8e..e8b6acb50d 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1878,15 +1880,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1899,8 +1898,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2551,7 +2548,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index 29924ca979..36170163d1 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE_XYZ 50*60 #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h index f008eded81..6e1e3a4ae0 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1878,15 +1880,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false // Set 'true' for TMC220x @@ -1899,8 +1898,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true // TITAN Extruder #define INVERT_E1_DIR false @@ -2551,7 +2548,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h index 0c38d80818..12d118c96d 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h @@ -1522,6 +1522,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE_XYZ 50*60 #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel @@ -2348,7 +2351,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2605,13 +2608,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2643,6 +2648,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2849,7 +2856,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index 2e9f1cf551..fc05c0d86e 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 5 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1881,15 +1883,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1902,8 +1901,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2554,7 +2551,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 2e0b5de2da..3dbf5839f5 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE_XYZ 50*60 #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index 30b056b6da..b319039bbf 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 5 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1880,15 +1882,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1901,8 +1900,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2553,7 +2550,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 2e0b5de2da..3dbf5839f5 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE_XYZ 50*60 #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 66f951908f..8ccd045d1a 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 5 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1880,15 +1882,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1901,8 +1900,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2553,7 +2550,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 9b68a09984..ff0090c2e1 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE_XYZ 50*60 #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/delta/Geeetech/G2/Configuration.h b/config/examples/delta/Geeetech/G2/Configuration.h index 87e9f81cbf..3c9cbbaa00 100644 --- a/config/examples/delta/Geeetech/G2/Configuration.h +++ b/config/examples/delta/Geeetech/G2/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1879,15 +1881,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1900,8 +1899,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2553,7 +2550,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index ba546724fd..4f5ba0d040 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE_XYZ 50*60 #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration.h b/config/examples/delta/Geeetech/G2Pro/Configuration.h index e5865081bc..352297affb 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1879,15 +1881,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1900,8 +1899,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2553,7 +2550,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index ba546724fd..4f5ba0d040 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE_XYZ 50*60 #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/delta/Geeetech/G2S/Configuration.h b/config/examples/delta/Geeetech/G2S/Configuration.h index 441121cd60..cc7034b532 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration.h +++ b/config/examples/delta/Geeetech/G2S/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1879,15 +1881,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1900,8 +1899,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false // Geeetech G2S usually comes with a "mirrored" feeder running in the opposite direction @@ -2553,7 +2550,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index ba546724fd..4f5ba0d040 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE_XYZ 50*60 #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration.h b/config/examples/delta/Geeetech/G2SPro/Configuration.h index c0695a51d0..d30ffb5e45 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1879,15 +1881,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1900,8 +1899,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2553,7 +2550,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index ba546724fd..4f5ba0d040 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE_XYZ 50*60 #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index dfb051be98..6f05a7c436 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1878,15 +1880,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1899,8 +1898,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR true @@ -2551,7 +2548,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index eafd70292e..0018c60928 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE_XYZ 50*60 #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index 0c910d8e13..98734ded5a 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -482,7 +482,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -667,6 +667,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1883,15 +1885,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1904,8 +1903,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2556,7 +2553,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index aed9a49d58..5df63cb8a8 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE_XYZ 50*60 #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index f45806398a..7a397899f1 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1878,15 +1880,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false // DELTA does not invert @@ -1899,8 +1898,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2551,7 +2548,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index 2fadbf730c..0b80910782 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE_XYZ 50*60 #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/delta/Malyan M300/Configuration.h b/config/examples/delta/Malyan M300/Configuration.h index 98c011de7d..8dfd973281 100644 --- a/config/examples/delta/Malyan M300/Configuration.h +++ b/config/examples/delta/Malyan M300/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1872,15 +1874,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1893,8 +1892,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2545,7 +2542,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index 1f09c75abd..f0067252a3 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE_XYZ 50*60 #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/delta/Micromake-D1/MKS-Gen-L-V2.1/Configuration.h b/config/examples/delta/Micromake-D1/MKS-Gen-L-V2.1/Configuration.h index 0ab1d4b543..6b5a81c1a7 100644 --- a/config/examples/delta/Micromake-D1/MKS-Gen-L-V2.1/Configuration.h +++ b/config/examples/delta/Micromake-D1/MKS-Gen-L-V2.1/Configuration.h @@ -478,7 +478,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -663,6 +663,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1887,15 +1889,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1908,8 +1907,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2560,7 +2557,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/delta/Micromake-D1/MKS-Gen-L-V2.1/Configuration_adv.h b/config/examples/delta/Micromake-D1/MKS-Gen-L-V2.1/Configuration_adv.h index 76f73b33db..eb14d6c0dd 100644 --- a/config/examples/delta/Micromake-D1/MKS-Gen-L-V2.1/Configuration_adv.h +++ b/config/examples/delta/Micromake-D1/MKS-Gen-L-V2.1/Configuration_adv.h @@ -1523,6 +1523,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 50*60, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2348,7 +2351,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2601,13 +2604,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2639,6 +2644,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2845,7 +2852,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/delta/Micromake-D1/RAMPS-1.4/Configuration.h b/config/examples/delta/Micromake-D1/RAMPS-1.4/Configuration.h index 4fd2880e66..f3863e5a93 100644 --- a/config/examples/delta/Micromake-D1/RAMPS-1.4/Configuration.h +++ b/config/examples/delta/Micromake-D1/RAMPS-1.4/Configuration.h @@ -478,7 +478,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -663,6 +663,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1890,15 +1892,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1911,8 +1910,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2563,7 +2560,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/delta/Micromake-D1/RAMPS-1.4/Configuration_adv.h b/config/examples/delta/Micromake-D1/RAMPS-1.4/Configuration_adv.h index 8f3fa5f970..798da314d6 100644 --- a/config/examples/delta/Micromake-D1/RAMPS-1.4/Configuration_adv.h +++ b/config/examples/delta/Micromake-D1/RAMPS-1.4/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 50*60, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2599,13 +2602,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2637,6 +2642,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2843,7 +2850,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index e932880296..7310d17221 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1879,15 +1881,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1900,8 +1899,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2552,7 +2549,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 5472ceeb98..c0d5020f9e 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE_XYZ 50*60 #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/delta/Velleman/K8800/Configuration.h b/config/examples/delta/Velleman/K8800/Configuration.h index 9f94426327..653bffe482 100644 --- a/config/examples/delta/Velleman/K8800/Configuration.h +++ b/config/examples/delta/Velleman/K8800/Configuration.h @@ -488,7 +488,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -673,6 +673,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1907,15 +1909,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1928,8 +1927,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2583,7 +2580,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/delta/Velleman/K8800/Configuration_adv.h b/config/examples/delta/Velleman/K8800/Configuration_adv.h index 29af6946a6..0c895a1c13 100644 --- a/config/examples/delta/Velleman/K8800/Configuration_adv.h +++ b/config/examples/delta/Velleman/K8800/Configuration_adv.h @@ -1522,6 +1522,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE_XYZ 120*60 #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 80 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel @@ -2348,7 +2351,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2605,13 +2608,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2643,6 +2648,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2849,7 +2856,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index a2be78376a..f04fb597c1 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1878,15 +1880,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1899,8 +1898,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2551,7 +2548,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index 9b68a09984..ff0090c2e1 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE_XYZ 50*60 #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/delta/kossel_clear/Configuration.h b/config/examples/delta/kossel_clear/Configuration.h index d3d8acdd36..ac046be2c9 100644 --- a/config/examples/delta/kossel_clear/Configuration.h +++ b/config/examples/delta/kossel_clear/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1879,15 +1881,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1900,8 +1899,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2553,7 +2550,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index 8f25b60913..4873682701 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE_XYZ 50*60 #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index 273b75fb3c..3687c5b536 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 5 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1880,15 +1882,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1901,8 +1900,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2553,7 +2550,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h index c4ee2c2ffe..7a6ea2834a 100644 --- a/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/kossel_mini/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index 216c8f049e..c90651be71 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -481,7 +481,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -666,6 +666,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1899,15 +1901,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1920,8 +1919,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2572,7 +2569,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/delta/kossel_pro/Configuration_adv.h b/config/examples/delta/kossel_pro/Configuration_adv.h index c4ee2c2ffe..7a6ea2834a 100644 --- a/config/examples/delta/kossel_pro/Configuration_adv.h +++ b/config/examples/delta/kossel_pro/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index 024a049282..1b749bdc01 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1884,15 +1886,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1905,8 +1904,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2557,7 +2554,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index 2279bcbdfb..447a62b232 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE_XYZ 50*60 #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel @@ -2347,7 +2350,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2604,13 +2607,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2642,6 +2647,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2848,7 +2855,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h index b1958f9287..877845f6d7 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/config/examples/gCreate/gMax1.5+/Configuration.h @@ -481,7 +481,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -668,6 +668,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1877,15 +1879,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR true @@ -1898,8 +1897,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2551,7 +2548,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index e3879fd580..f2242a345f 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h index 58e2a8191c..ed90edf238 100644 --- a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h +++ b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h @@ -489,7 +489,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -674,6 +674,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1882,15 +1884,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1903,8 +1902,6 @@ #define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2555,7 +2552,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h index b504555f21..05e41e3d64 100644 --- a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h index e4943f704f..45eff7667a 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h @@ -464,7 +464,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -649,6 +649,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1857,15 +1859,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1878,8 +1877,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2530,7 +2527,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h index 0959f68778..37116997f0 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 50*60, 50*60, 50*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index af20fe0976..ff0ecfc44d 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1873,15 +1875,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1894,8 +1893,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR true #define INVERT_E1_DIR false @@ -2546,7 +2543,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index a982f542cb..d2d2dac7e0 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index cb1bb61053..f119d1075f 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -477,7 +477,7 @@ //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== -// @section temperature +// @section temperature sensors /** * Temperature Sensors: @@ -662,6 +662,8 @@ #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif +// @section temperature + // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 @@ -1877,15 +1879,12 @@ //#define DISABLE_V //#define DISABLE_W -// Turn off the display blinking that warns about possible accuracy reduction -//#define DISABLE_REDUCED_ACCURACY_WARNING - // @section extruder //#define DISABLE_E // Disable the extruder when not stepping #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled -// @section motion +// @section stepper drivers // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false @@ -1898,8 +1897,6 @@ //#define INVERT_V_DIR false //#define INVERT_W_DIR false -// @section extruder - // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false @@ -2550,7 +2547,7 @@ // //#define TEMPERATURE_UNITS_SUPPORT -// @section temperature +// @section temperature presets // // Preheat Constants - Up to 10 are supported without changes diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index 4c646f8bf3..de392ecb72 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -1521,6 +1521,9 @@ // @section lcd +// Turn off the display blinking that warns about possible accuracy reduction +//#define DISABLE_REDUCED_ACCURACY_WARNING + #if HAS_MANUAL_MOVE_MENU #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines @@ -2346,7 +2349,7 @@ //#define WATCHDOG_RESET_MANUAL #endif -// @section lcd +// @section baby-stepping /** * Babystepping enables movement of the axes by tiny increments without changing @@ -2603,13 +2606,15 @@ #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND -// @section extras +// @section gcode // // G60/G61 Position Save and Return // //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +// @section motion + // // G2/G3 Arc Support // @@ -2641,6 +2646,8 @@ */ //#define DIRECT_STEPPING +// @section calibrate + /** * G38 Probe Target * @@ -2847,7 +2854,7 @@ */ //#define EXTRA_FAN_SPEED -// @section gcode +// @section firmware retraction /** * Firmware-based and LCD-controlled retract