Add PE_LEDS_COMPLETED_TIME

config/default/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/3DFabXYZ/Migbot/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/ADIMLab/Gantry v1/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/ADIMLab/Gantry v2/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Alfawise/U20-bltouch/Configuration_adv.h

@@ -1050,6 +1050,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28X"        // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Alfawise/U20/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28X"        // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/AliExpress/UM2pExt/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Anet/A2/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Anet/A2plus/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Anet/A6/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Anet/A8/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Anet/A8plus/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY\nG91\nG1 F1000 Z+20\nG1 F5000 Y" STRINGIFY(Y_MAX_POS) "\nG90\nM84 X Y E"      // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Anet/E10/Configuration_adv.h

@@ -1047,7 +1047,11 @@
 
   //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
 
-  #define EVENT_GCODE_SD_STOP "G27"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
+  #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
+
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
 
   /**
    * Continue after Power-Loss (Creality3D)

config/examples/Anet/E16/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/AnyCubic/i3/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/ArmEd/Configuration_adv.h

@@ -1053,6 +1053,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Artillery/Genius/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Artillery/Sidewinder X1/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/BIBO/TouchX/default/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/BQ/Hephestos/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -1057,6 +1057,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/BQ/WITBOX/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/BigTreeTech/BTT002 - Prusa MK3S - TMC2209/Configuration_adv.h

@@ -1045,6 +1045,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Cartesio/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Copymaster3D/300/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Copymaster3D/400/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Copymaster3D/500/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Creality/CR-10/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Creality/CR-10S/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Creality/CR-10_5S/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Creality/CR-10mini/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Creality/CR-20 Pro/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Creality/CR-20/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Creality/CR-8/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Creality/Ender-2/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Creality/Ender-3/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Creality/Ender-4/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Creality/Ender-5 Pro/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Creality/Ender-5/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Dagoma/Disco Ultimate/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Einstart-S/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/FYSETC/AIO_II/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "M21"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "M21"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "M21"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/FYSETC/Cheetah/base/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "M21"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/FYSETC/F6_13/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/FYSETC/S6/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Felix/DUAL/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Felix/Single/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/FlashForge/CreatorPro/Configuration_adv.h

@@ -1048,6 +1048,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Formbot/Raptor/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Formbot/T_Rex_2+/Configuration_adv.h

@@ -1048,6 +1048,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Formbot/T_Rex_3/Configuration_adv.h

@@ -1053,6 +1053,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Geeetech/A10/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Geeetech/A10D/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Geeetech/A10M/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Geeetech/A10T/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Geeetech/A20/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Geeetech/A20M/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Geeetech/A20T/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Geeetech/A30/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Geeetech/D200/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Geeetech/Duplicator5/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Geeetech/E180/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Geeetech/M201/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Geeetech/MeCreator2/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Geeetech/Me_creator/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Geeetech/Me_ducer/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Geeetech/PI3A PRO/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/HMS434/Configuration_adv.h

@@ -1042,6 +1042,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/JGAurora/A1/Configuration_adv.h

@@ -1054,6 +1054,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/JGAurora/A5/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/JGAurora/A5S/Configuration_adv.h

@@ -1054,6 +1054,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/JGAurora/Magic/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/MakerFarm/Pegasus_12/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/MakerParts/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Malyan/M150/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Malyan/M200/Configuration_adv.h

@@ -1051,6 +1051,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Mks/Robin/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Mks/Sbase/Configuration_adv.h

@@ -1050,6 +1050,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Modix/Big60/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/RapideLite/RL200/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Renkforce/RF100/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Renkforce/RF100XL/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/Renkforce/RF100v2/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/RigidBot/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/SCARA/MP_SCARA/Configuration_adv.h

@@ -1046,6 +1046,10 @@
 
   //#define EVENT_GCODE_SD_STOP "G28XY"     // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/SCARA/Morgan/Configuration_adv.h

@@ -1046,6 +1046,10 @@
 
   //#define EVENT_GCODE_SD_STOP "G28XY"     // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *

config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h

@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *