diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
index 370fbaf6ec..00f89662c7 100644
--- a/config/default/Configuration_adv.h
+++ b/config/default/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
index 86d0693983..f62e8992b1 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h
index 1cf4453ba9..5b2eebe8f7 100644
--- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h	
+++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h	
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h
index ac881a09c2..b4fe67effd 100644
--- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h	
+++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h	
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index 4fcecf0db2..f00be909b0 100644
--- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
index 08501de4b3..78e9078623 100644
--- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
+++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
@@ -1050,6 +1050,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28X"        // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h
index b2e0682e35..64ac74dacd 100644
--- a/config/examples/Alfawise/U20/Configuration_adv.h
+++ b/config/examples/Alfawise/U20/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28X"        // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
index 057f0f8a7c..39723cb338 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h
index 15c2df0301..3225feb46e 100644
--- a/config/examples/Anet/A2/Configuration_adv.h
+++ b/config/examples/Anet/A2/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h
index 15c2df0301..3225feb46e 100644
--- a/config/examples/Anet/A2plus/Configuration_adv.h
+++ b/config/examples/Anet/A2plus/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h
index e7e96388c9..a38589f99e 100644
--- a/config/examples/Anet/A6/Configuration_adv.h
+++ b/config/examples/Anet/A6/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h
index 1b971be8ff..b76956894a 100644
--- a/config/examples/Anet/A8/Configuration_adv.h
+++ b/config/examples/Anet/A8/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h
index 8f2d3cd7c9..c656b62681 100644
--- a/config/examples/Anet/A8plus/Configuration_adv.h
+++ b/config/examples/Anet/A8plus/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY\nG91\nG1 F1000 Z+20\nG1 F5000 Y" STRINGIFY(Y_MAX_POS) "\nG90\nM84 X Y E"      // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h
index 2bf3b11c5a..183ca0eae4 100644
--- a/config/examples/Anet/E10/Configuration_adv.h
+++ b/config/examples/Anet/E10/Configuration_adv.h
@@ -1047,7 +1047,11 @@
 
   //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
 
-  #define EVENT_GCODE_SD_STOP "G27"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
+  #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
+
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
 
   /**
    * Continue after Power-Loss (Creality3D)
diff --git a/config/examples/Anet/E16/Configuration_adv.h b/config/examples/Anet/E16/Configuration_adv.h
index 23644b1918..64a3d1d1b2 100644
--- a/config/examples/Anet/E16/Configuration_adv.h
+++ b/config/examples/Anet/E16/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h
index 256895df47..b55e13f844 100644
--- a/config/examples/AnyCubic/i3/Configuration_adv.h
+++ b/config/examples/AnyCubic/i3/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h
index 3656ed49e0..2b482cea74 100644
--- a/config/examples/ArmEd/Configuration_adv.h
+++ b/config/examples/ArmEd/Configuration_adv.h
@@ -1053,6 +1053,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Artillery/Genius/Configuration_adv.h b/config/examples/Artillery/Genius/Configuration_adv.h
index 183049dd63..01c579050e 100755
--- a/config/examples/Artillery/Genius/Configuration_adv.h
+++ b/config/examples/Artillery/Genius/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h
index 183049dd63..01c579050e 100755
--- a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h	
+++ b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h	
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
index b62881faba..63c7b813a6 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h
index 83c8880758..075c1062e0 100644
--- a/config/examples/BIBO/TouchX/default/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h
index f5497264df..4954836936 100644
--- a/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h
index 7851507df4..e5d3fe6a5c 100644
--- a/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -1057,6 +1057,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h
index f5497264df..4954836936 100644
--- a/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/BigTreeTech/BTT002 - Prusa MK3S - TMC2209/Configuration_adv.h b/config/examples/BigTreeTech/BTT002 - Prusa MK3S - TMC2209/Configuration_adv.h
index ff714d8d0e..792886f031 100644
--- a/config/examples/BigTreeTech/BTT002 - Prusa MK3S - TMC2209/Configuration_adv.h	
+++ b/config/examples/BigTreeTech/BTT002 - Prusa MK3S - TMC2209/Configuration_adv.h	
@@ -1045,6 +1045,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h b/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h
index 50833272da..de2f60b8c1 100644
--- a/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h	
+++ b/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h	
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h b/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h
index 3b618075f6..0ce18704b9 100644
--- a/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h	
+++ b/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h	
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h
index 38719411e6..a03811ffae 100644
--- a/config/examples/Cartesio/Configuration_adv.h
+++ b/config/examples/Cartesio/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Copymaster3D/300/Configuration_adv.h b/config/examples/Copymaster3D/300/Configuration_adv.h
index 370fbaf6ec..00f89662c7 100644
--- a/config/examples/Copymaster3D/300/Configuration_adv.h
+++ b/config/examples/Copymaster3D/300/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Copymaster3D/400/Configuration_adv.h b/config/examples/Copymaster3D/400/Configuration_adv.h
index 370fbaf6ec..00f89662c7 100644
--- a/config/examples/Copymaster3D/400/Configuration_adv.h
+++ b/config/examples/Copymaster3D/400/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Copymaster3D/500/Configuration_adv.h b/config/examples/Copymaster3D/500/Configuration_adv.h
index 370fbaf6ec..00f89662c7 100644
--- a/config/examples/Copymaster3D/500/Configuration_adv.h
+++ b/config/examples/Copymaster3D/500/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Creality/CR-10/Configuration_adv.h b/config/examples/Creality/CR-10/Configuration_adv.h
index f81b0440f2..e6a3f1e471 100644
--- a/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/config/examples/Creality/CR-10/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Creality/CR-10S/Configuration_adv.h b/config/examples/Creality/CR-10S/Configuration_adv.h
index db6c1fa2f0..c4054f5b30 100644
--- a/config/examples/Creality/CR-10S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10S/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Creality/CR-10_5S/Configuration_adv.h b/config/examples/Creality/CR-10_5S/Configuration_adv.h
index fa65664862..3d6ff3e0c8 100644
--- a/config/examples/Creality/CR-10_5S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Creality/CR-10mini/Configuration_adv.h b/config/examples/Creality/CR-10mini/Configuration_adv.h
index 652238b83b..da2be173b9 100644
--- a/config/examples/Creality/CR-10mini/Configuration_adv.h
+++ b/config/examples/Creality/CR-10mini/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h
index 0c3f4093b3..1c3f4b2e1a 100644
--- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h	
+++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h	
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h
index 48dab4ba7e..e1fe539d97 100644
--- a/config/examples/Creality/CR-20/Configuration_adv.h
+++ b/config/examples/Creality/CR-20/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h
index efbd222005..f22f9827a7 100644
--- a/config/examples/Creality/CR-8/Configuration_adv.h
+++ b/config/examples/Creality/CR-8/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h
index 530c935167..009068415a 100644
--- a/config/examples/Creality/Ender-2/Configuration_adv.h
+++ b/config/examples/Creality/Ender-2/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Creality/Ender-3/Configuration_adv.h b/config/examples/Creality/Ender-3/Configuration_adv.h
index b83a699b47..89944e807f 100644
--- a/config/examples/Creality/Ender-3/Configuration_adv.h
+++ b/config/examples/Creality/Ender-3/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h
index 5dc85ed88b..1d57f70edc 100644
--- a/config/examples/Creality/Ender-4/Configuration_adv.h
+++ b/config/examples/Creality/Ender-4/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Creality/Ender-5 Pro/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/Configuration_adv.h
index a42828a2f4..8b7407cac8 100644
--- a/config/examples/Creality/Ender-5 Pro/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5 Pro/Configuration_adv.h	
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Creality/Ender-5/Configuration_adv.h b/config/examples/Creality/Ender-5/Configuration_adv.h
index 06395d3dc6..a008cc2c13 100644
--- a/config/examples/Creality/Ender-5/Configuration_adv.h
+++ b/config/examples/Creality/Ender-5/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
index 23336550cf..df3dfd36ba 100644
--- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h	
+++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h	
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h
index 9d8fe2cf44..c222019ecc 100644
--- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h	
+++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h	
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h
index ac7460a548..ad1216a5b4 100644
--- a/config/examples/Einstart-S/Configuration_adv.h
+++ b/config/examples/Einstart-S/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h
index 581dcbd471..c61d43a428 100644
--- a/config/examples/FYSETC/AIO_II/Configuration_adv.h
+++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h
index eb951594bb..874d4cf344 100644
--- a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h	
+++ b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h	
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "M21"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h
index eb951594bb..874d4cf344 100644
--- a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h	
+++ b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h	
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "M21"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
index eb951594bb..874d4cf344 100644
--- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
+++ b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "M21"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h
index eb951594bb..874d4cf344 100644
--- a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h
+++ b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "M21"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h
index 29295b3ba6..561d28272a 100644
--- a/config/examples/FYSETC/F6_13/Configuration_adv.h
+++ b/config/examples/FYSETC/F6_13/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h
index f7b1397c7d..a9234b5f95 100644
--- a/config/examples/FYSETC/S6/Configuration_adv.h
+++ b/config/examples/FYSETC/S6/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h
index e0af15564f..76db6c3a15 100644
--- a/config/examples/Felix/DUAL/Configuration_adv.h
+++ b/config/examples/Felix/DUAL/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h
index e0af15564f..76db6c3a15 100644
--- a/config/examples/Felix/Single/Configuration_adv.h
+++ b/config/examples/Felix/Single/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
index ff086f0664..b5a6c5a440 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
@@ -1048,6 +1048,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index 22f1710f74..5c603966ca 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h
index 3759ea9f14..87bc1f94d7 100644
--- a/config/examples/Formbot/Raptor/Configuration_adv.h
+++ b/config/examples/Formbot/Raptor/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
index 88b657a3d6..2b81ebd5bd 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
@@ -1048,6 +1048,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
index 05d09cef7e..f9f0f5e6a1 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
@@ -1053,6 +1053,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h
index 229739f336..cd53963df1 100644
--- a/config/examples/Geeetech/A10/Configuration_adv.h
+++ b/config/examples/Geeetech/A10/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h
index 0937d95163..78917bbe5b 100644
--- a/config/examples/Geeetech/A10D/Configuration_adv.h
+++ b/config/examples/Geeetech/A10D/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h
index 0d2d6de1da..c822d0c409 100644
--- a/config/examples/Geeetech/A10M/Configuration_adv.h
+++ b/config/examples/Geeetech/A10M/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Geeetech/A10T/Configuration_adv.h b/config/examples/Geeetech/A10T/Configuration_adv.h
index 0d2d6de1da..c822d0c409 100644
--- a/config/examples/Geeetech/A10T/Configuration_adv.h
+++ b/config/examples/Geeetech/A10T/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h
index 5594f7feff..844a4299ff 100644
--- a/config/examples/Geeetech/A20/Configuration_adv.h
+++ b/config/examples/Geeetech/A20/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h
index 5594f7feff..844a4299ff 100644
--- a/config/examples/Geeetech/A20M/Configuration_adv.h
+++ b/config/examples/Geeetech/A20M/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h
index 5594f7feff..844a4299ff 100644
--- a/config/examples/Geeetech/A20T/Configuration_adv.h
+++ b/config/examples/Geeetech/A20T/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h
index cd4f487f62..b2e86ace82 100644
--- a/config/examples/Geeetech/A30/Configuration_adv.h
+++ b/config/examples/Geeetech/A30/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h
index 0bd8f4179e..3e6cd981e7 100644
--- a/config/examples/Geeetech/D200/Configuration_adv.h
+++ b/config/examples/Geeetech/D200/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h
index f7b1397c7d..a9234b5f95 100644
--- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h
+++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h
index cd4f487f62..b2e86ace82 100644
--- a/config/examples/Geeetech/E180/Configuration_adv.h
+++ b/config/examples/Geeetech/E180/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h
index 0bd8f4179e..3e6cd981e7 100644
--- a/config/examples/Geeetech/M201/Configuration_adv.h
+++ b/config/examples/Geeetech/M201/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
index c8992f1a86..53ee6a59bd 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h
index f7b1397c7d..a9234b5f95 100644
--- a/config/examples/Geeetech/Me_creator/Configuration_adv.h
+++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h
index f7b1397c7d..a9234b5f95 100644
--- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h
+++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h
index dcf69e7343..6f6c2de618 100644
--- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h	
+++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h	
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
index 229739f336..cd53963df1 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
index 229739f336..cd53963df1 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h
index 3e5bff9901..65bf4cc540 100644
--- a/config/examples/HMS434/Configuration_adv.h
+++ b/config/examples/HMS434/Configuration_adv.h
@@ -1042,6 +1042,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h
index 9245aed3f0..3e4b45c164 100644
--- a/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h
index f99d5c5ac7..47a740a21a 100644
--- a/config/examples/JGAurora/A1/Configuration_adv.h
+++ b/config/examples/JGAurora/A1/Configuration_adv.h
@@ -1054,6 +1054,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h
index 10fa5ab631..23029773b7 100644
--- a/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/config/examples/JGAurora/A5/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h
index f99d5c5ac7..47a740a21a 100644
--- a/config/examples/JGAurora/A5S/Configuration_adv.h
+++ b/config/examples/JGAurora/A5S/Configuration_adv.h
@@ -1054,6 +1054,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h
index 3edb45447d..bd19c7345a 100644
--- a/config/examples/JGAurora/Magic/Configuration_adv.h
+++ b/config/examples/JGAurora/Magic/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h
index 461bae0f1a..c6439e7b3b 100644
--- a/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h
+++ b/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h
index 65b38d5596..25dcb711f4 100644
--- a/config/examples/MakerParts/Configuration_adv.h
+++ b/config/examples/MakerParts/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h
index 9c13fc64e1..2b99bfc4ad 100644
--- a/config/examples/Malyan/M150/Configuration_adv.h
+++ b/config/examples/Malyan/M150/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h
index fee48fadf5..94af10e97f 100644
--- a/config/examples/Malyan/M200/Configuration_adv.h
+++ b/config/examples/Malyan/M200/Configuration_adv.h
@@ -1051,6 +1051,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index 2e5a2fe5d8..577949c9c4 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h
index ab5910b7c3..e1579bc26c 100644
--- a/config/examples/Mks/Robin/Configuration_adv.h
+++ b/config/examples/Mks/Robin/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h
index e24b07cfad..7bb9ec9a93 100644
--- a/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/config/examples/Mks/Sbase/Configuration_adv.h
@@ -1050,6 +1050,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h
index 6f7ad7c349..04c4b9b1d9 100644
--- a/config/examples/Modix/Big60/Configuration_adv.h
+++ b/config/examples/Modix/Big60/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h
index 686fd08892..ecf5db577a 100644
--- a/config/examples/RapideLite/RL200/Configuration_adv.h
+++ b/config/examples/RapideLite/RL200/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h
index 7688b7347f..239835968e 100644
--- a/config/examples/Renkforce/RF100/Configuration_adv.h
+++ b/config/examples/Renkforce/RF100/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h
index 7688b7347f..239835968e 100644
--- a/config/examples/Renkforce/RF100XL/Configuration_adv.h
+++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h
index 7688b7347f..239835968e 100644
--- a/config/examples/Renkforce/RF100v2/Configuration_adv.h
+++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h
index 2ef702e197..38aad2eb1e 100644
--- a/config/examples/RigidBot/Configuration_adv.h
+++ b/config/examples/RigidBot/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h
index 417bd0ad30..c16d8b75e8 100644
--- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h
+++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h
@@ -1046,6 +1046,10 @@
 
   //#define EVENT_GCODE_SD_STOP "G28XY"     // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h
index 177ca76779..e66b3576b8 100644
--- a/config/examples/SCARA/Morgan/Configuration_adv.h
+++ b/config/examples/SCARA/Morgan/Configuration_adv.h
@@ -1046,6 +1046,10 @@
 
   //#define EVENT_GCODE_SD_STOP "G28XY"     // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
index f367ad2cfe..3698a86ef4 100644
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h
index 9a306b23b3..7d8dd71bcd 100644
--- a/config/examples/Sanguinololu/Configuration_adv.h
+++ b/config/examples/Sanguinololu/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h
index 3c2c767a1c..9a7f52439a 100644
--- a/config/examples/Tevo/Michelangelo/Configuration_adv.h
+++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h
index 3d5a35ae51..d1ecc8accd 100755
--- a/config/examples/Tevo/Nereus/Configuration_adv.h
+++ b/config/examples/Tevo/Nereus/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h
index 8d3fe680fa..248c364044 100755
--- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h	
+++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h	
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h
index 428b3afe68..4ceea91636 100755
--- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h	
+++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h	
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h
index 428b3afe68..4ceea91636 100755
--- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h	
+++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h	
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h
index 7cb2141d04..d49ef4c0c9 100644
--- a/config/examples/TheBorg/Configuration_adv.h
+++ b/config/examples/TheBorg/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h
index c66f123e39..5d1b901a93 100644
--- a/config/examples/TinyBoy2/Configuration_adv.h
+++ b/config/examples/TinyBoy2/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h
index 2038764039..5957b63394 100644
--- a/config/examples/Tronxy/X3A/Configuration_adv.h
+++ b/config/examples/Tronxy/X3A/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
index 8750f44f24..26ed0abbf1 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h
index 035e039fdb..c2d1a7303c 100644
--- a/config/examples/UltiMachine/Archim1/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h
index ece769d4de..80df1c22d0 100644
--- a/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h
index 6cdc07ec2c..eac73695f9 100644
--- a/config/examples/VORONDesign/Configuration_adv.h
+++ b/config/examples/VORONDesign/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h
index 2053c3bc6b..b26f351496 100644
--- a/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/config/examples/Velleman/K8200/Configuration_adv.h
@@ -1062,6 +1062,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h
index 355f815576..0c0dc60caf 100644
--- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h
+++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h
index 355f815576..0c0dc60caf 100644
--- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h
+++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h
index 8024251309..f775fe0c69 100644
--- a/config/examples/WASP/PowerWASP/Configuration_adv.h
+++ b/config/examples/WASP/PowerWASP/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index e30fb84e2c..068549a9df 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
+++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
@@ -1051,6 +1051,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h
index 618c461c88..4787653979 100644
--- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h	
+++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h	
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h
index f744a42d62..94bb0a4f12 100644
--- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h	
+++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h	
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
index a5e44993f8..d11610557c 100644
--- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
@@ -1051,6 +1051,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h
index fbf22d1f94..2aa27c45cb 100644
--- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h
+++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h
@@ -1051,6 +1051,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h
index 3755331354..c6e8862a25 100644
--- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h
+++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h
@@ -1051,6 +1051,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h
index a250587fae..ec73d97fc7 100644
--- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h
@@ -1051,6 +1051,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 223326290c..d56f1babbd 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -1051,6 +1051,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
index 223326290c..d56f1babbd 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@@ -1051,6 +1051,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index cc89eb5fe5..18561baa11 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -1051,6 +1051,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h
index c35c2d873f..1797a60ed1 100644
--- a/config/examples/delta/Geeetech/G2/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h
@@ -1051,6 +1051,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h
index b17da24e65..6df1e67ba2 100644
--- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h
@@ -1051,6 +1051,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h
index b17da24e65..6df1e67ba2 100644
--- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h
@@ -1051,6 +1051,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h
index b17da24e65..6df1e67ba2 100644
--- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h
@@ -1051,6 +1051,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
index 05290a15e4..0d8715f679 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h	
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h	
@@ -1051,6 +1051,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h
index 79beb93305..86e818e12e 100644
--- a/config/examples/delta/MKS/SBASE/Configuration_adv.h
+++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h
@@ -1051,6 +1051,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h
index 8d01dc1f4d..eaa6ec3677 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h	
+++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h	
@@ -1051,6 +1051,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h
index cc89eb5fe5..18561baa11 100644
--- a/config/examples/delta/generic/Configuration_adv.h
+++ b/config/examples/delta/generic/Configuration_adv.h
@@ -1051,6 +1051,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h
index 39fbf413bc..301d602660 100644
--- a/config/examples/delta/kossel_clear/Configuration_adv.h
+++ b/config/examples/delta/kossel_clear/Configuration_adv.h
@@ -1051,6 +1051,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h
index cc89eb5fe5..18561baa11 100644
--- a/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -1051,6 +1051,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h
index 295862b427..a7c4cf475f 100644
--- a/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -1051,6 +1051,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index 59803cf8b5..ba0e648473 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h
index e69e3a4343..2183d34a09 100644
--- a/config/examples/makibox/Configuration_adv.h
+++ b/config/examples/makibox/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h
index 110a9a37ff..0dc26b26fc 100644
--- a/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -1049,6 +1049,10 @@
 
   #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *
diff --git a/config/examples/wt150/Configuration_adv.h b/config/examples/wt150/Configuration_adv.h
index 3435205279..66ce9ad20b 100644
--- a/config/examples/wt150/Configuration_adv.h
+++ b/config/examples/wt150/Configuration_adv.h
@@ -1050,6 +1050,10 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
+  #if ENABLED(PRINTER_EVENT_LEDS)
+    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
+  #endif
+
   /**
    * Continue after Power-Loss (Creality3D)
    *