mirror of
https://github.com/MarlinFirmware/Configurations.git
synced 2025-07-07 23:17:38 -06:00
Update Thermistor comments
This commit is contained in:
Scott Lahteine
parent
6777861352
commit
1f40060449
275 changed files with 21451 additions and 15401 deletions
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
@ -482,7 +504,7 @@
|
|||
|
||||
// Resistor values when using MAX31865 sensors (-5) on TEMP_SENSOR_0 / 1
|
||||
//#define MAX31865_SENSOR_OHMS_0 100 // (Ω) Typically 100 or 1000 (PT100 or PT1000)
|
||||
//#define MAX31865_CALIBRATION_OHMS_0 430 // (Ω) Typically 430 for AdaFruit PT100; 4300 for AdaFruit PT1000
|
||||
//#define MAX31865_CALIBRATION_OHMS_0 430 // (Ω) Typically 430 for Adafruit PT100; 4300 for Adafruit PT1000
|
||||
//#define MAX31865_SENSOR_OHMS_1 100
|
||||
//#define MAX31865_CALIBRATION_OHMS_1 430
|
||||
|
||||
|
|
|
|||
|
|
@ -398,70 +398,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 7
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -435,70 +435,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -435,70 +435,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 20
|
||||
#define TEMP_SENSOR_1 20
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 5
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 5
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 11
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -398,70 +398,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 5
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -398,70 +398,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 5
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 5
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 5
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 5
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -400,70 +400,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 5
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -398,70 +398,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -398,70 +398,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -418,70 +418,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 5
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 5
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 5
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 1
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 5
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 5
|
||||
#define TEMP_SENSOR_1 5
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -405,70 +405,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 70
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -398,70 +398,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 -1
|
||||
#define TEMP_SENSOR_1 -1
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 202
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 202
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 202
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -406,70 +406,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -406,70 +406,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -404,70 +404,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -404,70 +404,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -399,70 +399,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
|
|
@ -397,70 +397,92 @@
|
|||
// @section temperature
|
||||
|
||||
/**
|
||||
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
* --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
|
||||
*
|
||||
* Temperature sensors available:
|
||||
*
|
||||
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
|
||||
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
|
||||
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
|
||||
* -4 : thermocouple with AD8495
|
||||
* -1 : thermocouple with AD595
|
||||
* 0 : not used
|
||||
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
* 331 : (3.3V scaled thermistor 1 table for MEGA)
|
||||
* 332 : (3.3V scaled thermistor 1 table for DUE)
|
||||
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
* 202 : 200k thermistor - Copymaster 3D
|
||||
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
|
||||
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
|
||||
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
|
||||
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||
* 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
|
||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
|
||||
* SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
|
||||
* -------
|
||||
* -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-1)
|
||||
* NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
|
||||
* -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
|
||||
* -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-1)
|
||||
*
|
||||
* NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
|
||||
* Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
|
||||
* Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
|
||||
* Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
|
||||
*
|
||||
* Analog Themocouple Boards
|
||||
* -------
|
||||
* -4 : AD8495 with Thermocouple
|
||||
* -1 : AD595 with Thermocouple
|
||||
*
|
||||
* Analog Thermistors - 4.7kΩ pullup - Normal
|
||||
* -------
|
||||
* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
|
||||
* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
|
||||
* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
|
||||
* 2 : 200kΩ ATC Semitec 204GT-2
|
||||
* 202 : 200kΩ Copymaster 3D
|
||||
* 3 : ???Ω Mendel-parts thermistor
|
||||
* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
|
||||
* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
|
||||
* 501 : 100kΩ Zonestar - Tronxy X3A
|
||||
* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
|
||||
* 512 : 100kΩ RPW-Ultra hotend
|
||||
* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
|
||||
* 7 : 100kΩ Honeywell 135-104LAG-J01
|
||||
* 71 : 100kΩ Honeywell 135-104LAF-J01
|
||||
* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
|
||||
* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
|
||||
* 10 : 100kΩ RS PRO 198-961
|
||||
* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
|
||||
* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
|
||||
* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
|
||||
* 15 : 100kΩ Calibrated for JGAurora A5 hotend
|
||||
* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
|
||||
* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
|
||||
* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
|
||||
* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
|
||||
* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
|
||||
* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
|
||||
* 66 : 4.7MΩ Dyze Design High Temperature Thermistor
|
||||
* 67 : 500kΩ SliceEngineering 450°C Thermistor
|
||||
* 70 : 100kΩ bq Hephestos 2
|
||||
* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
|
||||
*
|
||||
* Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
|
||||
* ------- (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100kΩ EPCOS (1kΩ pullup)
|
||||
* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
|
||||
* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
|
||||
*
|
||||
* Analog Thermistors - 10kΩ pullup - Atypical
|
||||
* -------
|
||||
* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
|
||||
*
|
||||
* Analog RTDs (Pt100/Pt1000)
|
||||
* -------
|
||||
* 110 : Pt100 with 1kΩ pullup (atypical)
|
||||
* 147 : Pt100 with 4.7kΩ pullup
|
||||
* 1010 : Pt1000 with 1kΩ pullup (atypical)
|
||||
* 1047 : Pt1000 with 4.7kΩ pullup (E3D)
|
||||
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
|
||||
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
|
||||
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
|
||||
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
|
||||
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
|
||||
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
|
||||
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
|
||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
|
||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||
* 67 : 450C thermistor from SliceEngineering
|
||||
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
|
||||
* 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
|
||||
*
|
||||
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||
* (but gives greater accuracy and more stable PID)
|
||||
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
*
|
||||
* 1047 : Pt1000 with 4k7 pullup (E3D)
|
||||
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* Custom / Dummy / Other
|
||||
* ------
|
||||
* 0 : not used
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
|
|
|
|||
Some files were not shown because too many files have changed in this diff Show more
Loading…
Add table
Add a link
Reference in a new issue