qemu/hw/pci-host/versatile.c
Peter Maydell 7468d73ac9 versatile_pci: Implement the PCI controller's control registers
The versatile_pci PCI controller has a set of control registers which
handle the mapping between PCI and system address spaces. Implement
these registers (though for now they have no effect since we don't
implement mapping PCI space into system memory at all).

The most natural order for our sysbus regions has the control
registers at the start, so move all the others down one.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paul Brook <paul@codesourcery.com>
2013-04-19 11:15:20 +01:00

402 lines
11 KiB
C

/*
* ARM Versatile/PB PCI host controller
*
* Copyright (c) 2006-2009 CodeSourcery.
* Written by Paul Brook
*
* This code is licensed under the LGPL.
*/
#include "hw/sysbus.h"
#include "hw/pci/pci.h"
#include "hw/pci/pci_bus.h"
#include "hw/pci/pci_host.h"
#include "exec/address-spaces.h"
/* Old and buggy versions of QEMU used the wrong mapping from
* PCI IRQs to system interrupt lines. Unfortunately the Linux
* kernel also had the corresponding bug in setting up interrupts
* (so older kernels work on QEMU and not on real hardware).
* We automatically detect these broken kernels and flip back
* to the broken irq mapping by spotting guest writes to the
* PCI_INTERRUPT_LINE register to see where the guest thinks
* interrupts are going to be routed. So we start in state
* ASSUME_OK on reset, and transition to either BROKEN or
* FORCE_OK at the first write to an INTERRUPT_LINE register for
* a slot where broken and correct interrupt mapping would differ.
* Once in either BROKEN or FORCE_OK we never transition again;
* this allows a newer kernel to use the INTERRUPT_LINE
* registers arbitrarily once it has indicated that it isn't
* broken in its init code somewhere.
*/
enum {
PCI_VPB_IRQMAP_ASSUME_OK,
PCI_VPB_IRQMAP_BROKEN,
PCI_VPB_IRQMAP_FORCE_OK,
};
typedef struct {
PCIHostState parent_obj;
qemu_irq irq[4];
MemoryRegion controlregs;
MemoryRegion mem_config;
MemoryRegion mem_config2;
MemoryRegion pci_io_space;
MemoryRegion pci_io_window;
PCIBus pci_bus;
PCIDevice pci_dev;
/* Constant for life of device: */
int realview;
/* Variable state: */
uint32_t imap[3];
uint32_t smap[3];
uint32_t selfid;
uint32_t flags;
uint8_t irq_mapping;
} PCIVPBState;
static const VMStateDescription pci_vpb_vmstate = {
.name = "versatile-pci",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_UINT32_ARRAY(imap, PCIVPBState, 3),
VMSTATE_UINT32_ARRAY(smap, PCIVPBState, 3),
VMSTATE_UINT32(selfid, PCIVPBState),
VMSTATE_UINT32(flags, PCIVPBState),
VMSTATE_UINT8(irq_mapping, PCIVPBState),
VMSTATE_END_OF_LIST()
}
};
#define TYPE_VERSATILE_PCI "versatile_pci"
#define PCI_VPB(obj) \
OBJECT_CHECK(PCIVPBState, (obj), TYPE_VERSATILE_PCI)
#define TYPE_VERSATILE_PCI_HOST "versatile_pci_host"
#define PCI_VPB_HOST(obj) \
OBJECT_CHECK(PCIDevice, (obj), TYPE_VERSATILE_PCIHOST)
typedef enum {
PCI_IMAP0 = 0x0,
PCI_IMAP1 = 0x4,
PCI_IMAP2 = 0x8,
PCI_SELFID = 0xc,
PCI_FLAGS = 0x10,
PCI_SMAP0 = 0x14,
PCI_SMAP1 = 0x18,
PCI_SMAP2 = 0x1c,
} PCIVPBControlRegs;
static void pci_vpb_reg_write(void *opaque, hwaddr addr,
uint64_t val, unsigned size)
{
PCIVPBState *s = opaque;
switch (addr) {
case PCI_IMAP0:
case PCI_IMAP1:
case PCI_IMAP2:
{
int win = (addr - PCI_IMAP0) >> 2;
s->imap[win] = val;
break;
}
case PCI_SELFID:
s->selfid = val;
break;
case PCI_FLAGS:
s->flags = val;
break;
case PCI_SMAP0:
case PCI_SMAP1:
case PCI_SMAP2:
{
int win = (addr - PCI_SMAP0) >> 2;
s->smap[win] = val;
break;
}
default:
qemu_log_mask(LOG_GUEST_ERROR,
"pci_vpb_reg_write: Bad offset %x\n", (int)addr);
break;
}
}
static uint64_t pci_vpb_reg_read(void *opaque, hwaddr addr,
unsigned size)
{
PCIVPBState *s = opaque;
switch (addr) {
case PCI_IMAP0:
case PCI_IMAP1:
case PCI_IMAP2:
{
int win = (addr - PCI_IMAP0) >> 2;
return s->imap[win];
}
case PCI_SELFID:
return s->selfid;
case PCI_FLAGS:
return s->flags;
case PCI_SMAP0:
case PCI_SMAP1:
case PCI_SMAP2:
{
int win = (addr - PCI_SMAP0) >> 2;
return s->smap[win];
}
default:
qemu_log_mask(LOG_GUEST_ERROR,
"pci_vpb_reg_read: Bad offset %x\n", (int)addr);
return 0;
}
}
static const MemoryRegionOps pci_vpb_reg_ops = {
.read = pci_vpb_reg_read,
.write = pci_vpb_reg_write,
.endianness = DEVICE_NATIVE_ENDIAN,
.valid = {
.min_access_size = 4,
.max_access_size = 4,
},
};
static inline uint32_t vpb_pci_config_addr(hwaddr addr)
{
return addr & 0xffffff;
}
static void pci_vpb_config_write(void *opaque, hwaddr addr,
uint64_t val, unsigned size)
{
PCIVPBState *s = opaque;
if (!s->realview && (addr & 0xff) == PCI_INTERRUPT_LINE
&& s->irq_mapping == PCI_VPB_IRQMAP_ASSUME_OK) {
uint8_t devfn = addr >> 8;
if ((PCI_SLOT(devfn) % PCI_NUM_PINS) != 2) {
if (val == 27) {
s->irq_mapping = PCI_VPB_IRQMAP_BROKEN;
} else {
s->irq_mapping = PCI_VPB_IRQMAP_FORCE_OK;
}
}
}
pci_data_write(&s->pci_bus, vpb_pci_config_addr(addr), val, size);
}
static uint64_t pci_vpb_config_read(void *opaque, hwaddr addr,
unsigned size)
{
PCIVPBState *s = opaque;
uint32_t val;
val = pci_data_read(&s->pci_bus, vpb_pci_config_addr(addr), size);
return val;
}
static const MemoryRegionOps pci_vpb_config_ops = {
.read = pci_vpb_config_read,
.write = pci_vpb_config_write,
.endianness = DEVICE_NATIVE_ENDIAN,
};
static int pci_vpb_map_irq(PCIDevice *d, int irq_num)
{
PCIVPBState *s = container_of(d->bus, PCIVPBState, pci_bus);
if (s->irq_mapping == PCI_VPB_IRQMAP_BROKEN) {
/* Legacy broken IRQ mapping for compatibility with old and
* buggy Linux guests
*/
return irq_num;
}
/* Slot to IRQ mapping for RealView Platform Baseboard 926 backplane
* name slot IntA IntB IntC IntD
* A 31 IRQ28 IRQ29 IRQ30 IRQ27
* B 30 IRQ27 IRQ28 IRQ29 IRQ30
* C 29 IRQ30 IRQ27 IRQ28 IRQ29
* Slot C is for the host bridge; A and B the peripherals.
* Our output irqs 0..3 correspond to the baseboard's 27..30.
*
* This mapping function takes account of an oddity in the PB926
* board wiring, where the FPGA's P_nINTA input is connected to
* the INTB connection on the board PCI edge connector, P_nINTB
* is connected to INTC, and so on, so everything is one number
* further round from where you might expect.
*/
return pci_swizzle_map_irq_fn(d, irq_num + 2);
}
static int pci_vpb_rv_map_irq(PCIDevice *d, int irq_num)
{
/* Slot to IRQ mapping for RealView EB and PB1176 backplane
* name slot IntA IntB IntC IntD
* A 31 IRQ50 IRQ51 IRQ48 IRQ49
* B 30 IRQ49 IRQ50 IRQ51 IRQ48
* C 29 IRQ48 IRQ49 IRQ50 IRQ51
* Slot C is for the host bridge; A and B the peripherals.
* Our output irqs 0..3 correspond to the baseboard's 48..51.
*
* The PB1176 and EB boards don't have the PB926 wiring oddity
* described above; P_nINTA connects to INTA, P_nINTB to INTB
* and so on, which is why this mapping function is different.
*/
return pci_swizzle_map_irq_fn(d, irq_num + 3);
}
static void pci_vpb_set_irq(void *opaque, int irq_num, int level)
{
qemu_irq *pic = opaque;
qemu_set_irq(pic[irq_num], level);
}
static void pci_vpb_reset(DeviceState *d)
{
PCIVPBState *s = PCI_VPB(d);
s->imap[0] = 0;
s->imap[1] = 0;
s->imap[2] = 0;
s->smap[0] = 0;
s->smap[1] = 0;
s->smap[2] = 0;
s->selfid = 0;
s->flags = 0;
s->irq_mapping = PCI_VPB_IRQMAP_ASSUME_OK;
}
static void pci_vpb_init(Object *obj)
{
PCIHostState *h = PCI_HOST_BRIDGE(obj);
PCIVPBState *s = PCI_VPB(obj);
memory_region_init(&s->pci_io_space, "pci_io", 1ULL << 32);
pci_bus_new_inplace(&s->pci_bus, DEVICE(obj), "pci",
get_system_memory(), &s->pci_io_space,
PCI_DEVFN(11, 0), TYPE_PCI_BUS);
h->bus = &s->pci_bus;
object_initialize(&s->pci_dev, TYPE_VERSATILE_PCI_HOST);
qdev_set_parent_bus(DEVICE(&s->pci_dev), BUS(&s->pci_bus));
object_property_set_int(OBJECT(&s->pci_dev), PCI_DEVFN(29, 0), "addr",
NULL);
}
static void pci_vpb_realize(DeviceState *dev, Error **errp)
{
PCIVPBState *s = PCI_VPB(dev);
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
pci_map_irq_fn mapfn;
int i;
for (i = 0; i < 4; i++) {
sysbus_init_irq(sbd, &s->irq[i]);
}
if (s->realview) {
mapfn = pci_vpb_rv_map_irq;
} else {
mapfn = pci_vpb_map_irq;
}
pci_bus_irqs(&s->pci_bus, pci_vpb_set_irq, mapfn, s->irq, 4);
/* Our memory regions are:
* 0 : our control registers
* 1 : PCI self config window
* 2 : PCI config window
* 3 : PCI IO window
*/
memory_region_init_io(&s->controlregs, &pci_vpb_reg_ops, s, "pci-vpb-regs",
0x1000);
sysbus_init_mmio(sbd, &s->controlregs);
memory_region_init_io(&s->mem_config, &pci_vpb_config_ops, s,
"pci-vpb-selfconfig", 0x1000000);
sysbus_init_mmio(sbd, &s->mem_config);
memory_region_init_io(&s->mem_config2, &pci_vpb_config_ops, s,
"pci-vpb-config", 0x1000000);
sysbus_init_mmio(sbd, &s->mem_config2);
/* The window into I/O space is always into a fixed base address;
* its size is the same for both realview and versatile.
*/
memory_region_init_alias(&s->pci_io_window, "pci-vbp-io-window",
&s->pci_io_space, 0, 0x100000);
sysbus_init_mmio(sbd, &s->pci_io_space);
/* TODO Remove once realize propagates to child devices. */
object_property_set_bool(OBJECT(&s->pci_dev), true, "realized", errp);
}
static int versatile_pci_host_init(PCIDevice *d)
{
pci_set_word(d->config + PCI_STATUS,
PCI_STATUS_66MHZ | PCI_STATUS_DEVSEL_MEDIUM);
pci_set_byte(d->config + PCI_LATENCY_TIMER, 0x10);
return 0;
}
static void versatile_pci_host_class_init(ObjectClass *klass, void *data)
{
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
k->init = versatile_pci_host_init;
k->vendor_id = PCI_VENDOR_ID_XILINX;
k->device_id = PCI_DEVICE_ID_XILINX_XC2VP30;
k->class_id = PCI_CLASS_PROCESSOR_CO;
}
static const TypeInfo versatile_pci_host_info = {
.name = TYPE_VERSATILE_PCI_HOST,
.parent = TYPE_PCI_DEVICE,
.instance_size = sizeof(PCIDevice),
.class_init = versatile_pci_host_class_init,
};
static void pci_vpb_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->realize = pci_vpb_realize;
dc->reset = pci_vpb_reset;
dc->vmsd = &pci_vpb_vmstate;
}
static const TypeInfo pci_vpb_info = {
.name = TYPE_VERSATILE_PCI,
.parent = TYPE_PCI_HOST_BRIDGE,
.instance_size = sizeof(PCIVPBState),
.instance_init = pci_vpb_init,
.class_init = pci_vpb_class_init,
};
static void pci_realview_init(Object *obj)
{
PCIVPBState *s = PCI_VPB(obj);
s->realview = 1;
}
static const TypeInfo pci_realview_info = {
.name = "realview_pci",
.parent = TYPE_VERSATILE_PCI,
.instance_init = pci_realview_init,
};
static void versatile_pci_register_types(void)
{
type_register_static(&pci_vpb_info);
type_register_static(&pci_realview_info);
type_register_static(&versatile_pci_host_info);
}
type_init(versatile_pci_register_types)