qemu/hw/misc/sifive_u_otp.c
Thomas Huth 6b717a8d44 hw/misc/sifive_u_otp: Use IF_PFLASH for the OTP device instead of IF_NONE
Configuring a drive with "if=none" is meant for creation of a backend
only, it should not get automatically assigned to a device frontend.
Use "if=pflash" for the One-Time-Programmable device instead (like
it is e.g. also done for the efuse device in hw/arm/xlnx-zcu102.c).

Since the old way of configuring the device has already been published
with the previous QEMU versions, we cannot remove this immediately, but
have to deprecate it and support it for at least two more releases.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211119102549.217755-1-thuth@redhat.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-11-22 10:43:54 +10:00

304 lines
8.8 KiB
C

/*
* QEMU SiFive U OTP (One-Time Programmable) Memory interface
*
* Copyright (c) 2019 Bin Meng <bmeng.cn@gmail.com>
*
* Simple model of the OTP to emulate register reads made by the SDK BSP
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2 or later, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "hw/qdev-properties.h"
#include "hw/qdev-properties-system.h"
#include "hw/sysbus.h"
#include "qemu/error-report.h"
#include "qemu/log.h"
#include "qemu/module.h"
#include "hw/misc/sifive_u_otp.h"
#include "sysemu/blockdev.h"
#include "sysemu/block-backend.h"
#define WRITTEN_BIT_ON 0x1
#define SET_FUSEARRAY_BIT(map, i, off, bit) \
map[i] = bit ? (map[i] | bit << off) : (map[i] & ~(0x1 << off))
#define GET_FUSEARRAY_BIT(map, i, off) \
((map[i] >> off) & 0x1)
static uint64_t sifive_u_otp_read(void *opaque, hwaddr addr, unsigned int size)
{
SiFiveUOTPState *s = opaque;
switch (addr) {
case SIFIVE_U_OTP_PA:
return s->pa;
case SIFIVE_U_OTP_PAIO:
return s->paio;
case SIFIVE_U_OTP_PAS:
return s->pas;
case SIFIVE_U_OTP_PCE:
return s->pce;
case SIFIVE_U_OTP_PCLK:
return s->pclk;
case SIFIVE_U_OTP_PDIN:
return s->pdin;
case SIFIVE_U_OTP_PDOUT:
if ((s->pce & SIFIVE_U_OTP_PCE_EN) &&
(s->pdstb & SIFIVE_U_OTP_PDSTB_EN) &&
(s->ptrim & SIFIVE_U_OTP_PTRIM_EN)) {
/* read from backend */
if (s->blk) {
int32_t buf;
if (blk_pread(s->blk, s->pa * SIFIVE_U_OTP_FUSE_WORD, &buf,
SIFIVE_U_OTP_FUSE_WORD) < 0) {
error_report("read error index<%d>", s->pa);
return 0xff;
}
return buf;
}
return s->fuse[s->pa & SIFIVE_U_OTP_PA_MASK];
} else {
return 0xff;
}
case SIFIVE_U_OTP_PDSTB:
return s->pdstb;
case SIFIVE_U_OTP_PPROG:
return s->pprog;
case SIFIVE_U_OTP_PTC:
return s->ptc;
case SIFIVE_U_OTP_PTM:
return s->ptm;
case SIFIVE_U_OTP_PTM_REP:
return s->ptm_rep;
case SIFIVE_U_OTP_PTR:
return s->ptr;
case SIFIVE_U_OTP_PTRIM:
return s->ptrim;
case SIFIVE_U_OTP_PWE:
return s->pwe;
}
qemu_log_mask(LOG_GUEST_ERROR, "%s: read: addr=0x%" HWADDR_PRIx "\n",
__func__, addr);
return 0;
}
static void sifive_u_otp_write(void *opaque, hwaddr addr,
uint64_t val64, unsigned int size)
{
SiFiveUOTPState *s = opaque;
uint32_t val32 = (uint32_t)val64;
switch (addr) {
case SIFIVE_U_OTP_PA:
s->pa = val32 & SIFIVE_U_OTP_PA_MASK;
break;
case SIFIVE_U_OTP_PAIO:
s->paio = val32;
break;
case SIFIVE_U_OTP_PAS:
s->pas = val32;
break;
case SIFIVE_U_OTP_PCE:
s->pce = val32;
break;
case SIFIVE_U_OTP_PCLK:
s->pclk = val32;
break;
case SIFIVE_U_OTP_PDIN:
s->pdin = val32;
break;
case SIFIVE_U_OTP_PDOUT:
/* read-only */
break;
case SIFIVE_U_OTP_PDSTB:
s->pdstb = val32;
break;
case SIFIVE_U_OTP_PPROG:
s->pprog = val32;
break;
case SIFIVE_U_OTP_PTC:
s->ptc = val32;
break;
case SIFIVE_U_OTP_PTM:
s->ptm = val32;
break;
case SIFIVE_U_OTP_PTM_REP:
s->ptm_rep = val32;
break;
case SIFIVE_U_OTP_PTR:
s->ptr = val32;
break;
case SIFIVE_U_OTP_PTRIM:
s->ptrim = val32;
break;
case SIFIVE_U_OTP_PWE:
s->pwe = val32 & SIFIVE_U_OTP_PWE_EN;
/* PWE is enabled. Ignore PAS=1 (no redundancy cell) */
if (s->pwe && !s->pas) {
if (GET_FUSEARRAY_BIT(s->fuse_wo, s->pa, s->paio)) {
qemu_log_mask(LOG_GUEST_ERROR,
"write once error: idx<%u>, bit<%u>\n",
s->pa, s->paio);
break;
}
/* write bit data */
SET_FUSEARRAY_BIT(s->fuse, s->pa, s->paio, s->pdin);
/* write to backend */
if (s->blk) {
if (blk_pwrite(s->blk, s->pa * SIFIVE_U_OTP_FUSE_WORD,
&s->fuse[s->pa], SIFIVE_U_OTP_FUSE_WORD,
0) < 0) {
error_report("write error index<%d>", s->pa);
}
}
/* update written bit */
SET_FUSEARRAY_BIT(s->fuse_wo, s->pa, s->paio, WRITTEN_BIT_ON);
}
break;
default:
qemu_log_mask(LOG_GUEST_ERROR, "%s: bad write: addr=0x%" HWADDR_PRIx
" v=0x%x\n", __func__, addr, val32);
}
}
static const MemoryRegionOps sifive_u_otp_ops = {
.read = sifive_u_otp_read,
.write = sifive_u_otp_write,
.endianness = DEVICE_NATIVE_ENDIAN,
.valid = {
.min_access_size = 4,
.max_access_size = 4
}
};
static Property sifive_u_otp_properties[] = {
DEFINE_PROP_UINT32("serial", SiFiveUOTPState, serial, 0),
DEFINE_PROP_DRIVE("drive", SiFiveUOTPState, blk),
DEFINE_PROP_END_OF_LIST(),
};
static void sifive_u_otp_realize(DeviceState *dev, Error **errp)
{
SiFiveUOTPState *s = SIFIVE_U_OTP(dev);
DriveInfo *dinfo;
memory_region_init_io(&s->mmio, OBJECT(dev), &sifive_u_otp_ops, s,
TYPE_SIFIVE_U_OTP, SIFIVE_U_OTP_REG_SIZE);
sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mmio);
dinfo = drive_get_next(IF_PFLASH);
if (!dinfo) {
dinfo = drive_get_next(IF_NONE);
if (dinfo) {
warn_report("using \"-drive if=none\" for the OTP is deprecated, "
"use \"-drive if=pflash\" instead.");
}
}
if (dinfo) {
int ret;
uint64_t perm;
int filesize;
BlockBackend *blk;
blk = blk_by_legacy_dinfo(dinfo);
filesize = SIFIVE_U_OTP_NUM_FUSES * SIFIVE_U_OTP_FUSE_WORD;
if (blk_getlength(blk) < filesize) {
error_setg(errp, "OTP drive size < 16K");
return;
}
qdev_prop_set_drive_err(dev, "drive", blk, errp);
if (s->blk) {
perm = BLK_PERM_CONSISTENT_READ |
(blk_supports_write_perm(s->blk) ? BLK_PERM_WRITE : 0);
ret = blk_set_perm(s->blk, perm, BLK_PERM_ALL, errp);
if (ret < 0) {
return;
}
if (blk_pread(s->blk, 0, s->fuse, filesize) != filesize) {
error_setg(errp, "failed to read the initial flash content");
}
}
}
}
static void sifive_u_otp_reset(DeviceState *dev)
{
SiFiveUOTPState *s = SIFIVE_U_OTP(dev);
/* Initialize all fuses' initial value to 0xFFs */
memset(s->fuse, 0xff, sizeof(s->fuse));
/* Make a valid content of serial number */
s->fuse[SIFIVE_U_OTP_SERIAL_ADDR] = s->serial;
s->fuse[SIFIVE_U_OTP_SERIAL_ADDR + 1] = ~(s->serial);
if (s->blk) {
/* Put serial number to backend as well*/
uint32_t serial_data;
int index = SIFIVE_U_OTP_SERIAL_ADDR;
serial_data = s->serial;
if (blk_pwrite(s->blk, index * SIFIVE_U_OTP_FUSE_WORD,
&serial_data, SIFIVE_U_OTP_FUSE_WORD, 0) < 0) {
error_report("write error index<%d>", index);
}
serial_data = ~(s->serial);
if (blk_pwrite(s->blk, (index + 1) * SIFIVE_U_OTP_FUSE_WORD,
&serial_data, SIFIVE_U_OTP_FUSE_WORD, 0) < 0) {
error_report("write error index<%d>", index + 1);
}
}
/* Initialize write-once map */
memset(s->fuse_wo, 0x00, sizeof(s->fuse_wo));
}
static void sifive_u_otp_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
device_class_set_props(dc, sifive_u_otp_properties);
dc->realize = sifive_u_otp_realize;
dc->reset = sifive_u_otp_reset;
}
static const TypeInfo sifive_u_otp_info = {
.name = TYPE_SIFIVE_U_OTP,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(SiFiveUOTPState),
.class_init = sifive_u_otp_class_init,
};
static void sifive_u_otp_register_types(void)
{
type_register_static(&sifive_u_otp_info);
}
type_init(sifive_u_otp_register_types)