Size is used at lines 1088/1188 for the loop, which reads the last 4
bytes from the crc_ptr so it does need to get increased, however it
shouldn't be increased before the buffer is passed to CRC computation,
or the crc32 function will access uninitialized memory.
This was pointed out to me by clg@kaod.org during the code review of
a similar patch to hw/net/ftgmac100.c
Change-Id: Ib0464303b191af1e28abeb2f5105eb25aadb5e9b
Signed-off-by: Stephen Longfield <slongfield@google.com>
Reviewed-by: Patrick Venture <venture@google.com>
Message-id: 20221221183202.3788132-1-slongfield@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
IRQs were not associated to the various GPIO devices inside i.MX7D.
This patch brings the i.MX7D on par with i.MX6.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 20221226101418.415170-1-jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The i.MX6UL doesn't support CLK_HIGH ou CLK_HIGH_DIV clock source.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
CCM derived clocks will have to be added later.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
So far the GPT timers were unable to raise IRQs to the processor.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When using Clang ("Apple clang version 14.0.0 (clang-1400.0.29.202)")
and building with -Wall we get:
hw/arm/smmu-common.c:173:33: warning: static function 'smmu_hash_remove_by_asid_iova' is used in an inline function with external linkage [-Wstatic-in-inline]
hw/arm/smmu-common.h:170:1: note: use 'static' to give inline function 'smmu_iotlb_inv_iova' internal linkage
void smmu_iotlb_inv_iova(SMMUState *s, int asid, dma_addr_t iova,
^
static
None of our code base require / use inlined functions with external
linkage. Some places use internal inlining in the hot path. These
two functions are certainly not in any hot path and don't justify
any inlining, so these are likely oversights rather than intentional.
Reported-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20221216214924.4711-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function is not used anywhere outside this file,
so we can make the function "static void".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20221216214924.4711-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In CPUID registers exposed to userspace, some registers were missing
and some fields were not exposed. This patch aligns exposed ID
registers and their fields with what the upstream kernel currently
exposes.
Specifically, the following new ID registers/fields are exposed to
userspace:
ID_AA64PFR1_EL1.BT: bits 3-0
ID_AA64PFR1_EL1.MTE: bits 11-8
ID_AA64PFR1_EL1.SME: bits 27-24
ID_AA64ZFR0_EL1.SVEver: bits 3-0
ID_AA64ZFR0_EL1.AES: bits 7-4
ID_AA64ZFR0_EL1.BitPerm: bits 19-16
ID_AA64ZFR0_EL1.BF16: bits 23-20
ID_AA64ZFR0_EL1.SHA3: bits 35-32
ID_AA64ZFR0_EL1.SM4: bits 43-40
ID_AA64ZFR0_EL1.I8MM: bits 47-44
ID_AA64ZFR0_EL1.F32MM: bits 55-52
ID_AA64ZFR0_EL1.F64MM: bits 59-56
ID_AA64SMFR0_EL1.F32F32: bit 32
ID_AA64SMFR0_EL1.B16F32: bit 34
ID_AA64SMFR0_EL1.F16F32: bit 35
ID_AA64SMFR0_EL1.I8I32: bits 39-36
ID_AA64SMFR0_EL1.F64F64: bit 48
ID_AA64SMFR0_EL1.I16I64: bits 55-52
ID_AA64SMFR0_EL1.FA64: bit 63
ID_AA64MMFR0_EL1.ECV: bits 63-60
ID_AA64MMFR1_EL1.AFP: bits 47-44
ID_AA64MMFR2_EL1.AT: bits 35-32
ID_AA64ISAR0_EL1.RNDR: bits 63-60
ID_AA64ISAR1_EL1.FRINTTS: bits 35-32
ID_AA64ISAR1_EL1.BF16: bits 47-44
ID_AA64ISAR1_EL1.DGH: bits 51-48
ID_AA64ISAR1_EL1.I8MM: bits 55-52
ID_AA64ISAR2_EL1.WFxT: bits 3-0
ID_AA64ISAR2_EL1.RPRES: bits 7-4
ID_AA64ISAR2_EL1.GPA3: bits 11-8
ID_AA64ISAR2_EL1.APA3: bits 15-12
The code is also refactored to use symbolic names for ID register fields
for better readability and maintainability.
The test case in tests/tcg/aarch64/sysregs.c is also updated to match
the intended behavior.
Signed-off-by: Zhuojia Shen <chaosdefinition@hotmail.com>
Message-id: DS7PR12MB6309FB585E10772928F14271ACE79@DS7PR12MB6309.namprd12.prod.outlook.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: use Sn_n_Cn_Cn_n syntax to work with older assemblers
that don't recognize id_aa64isar2_el1 and id_aa64mmfr2_el1]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Silent when compiling with -Wextra:
../hw/arm/nseries.c:1081:12: warning: missing field 'line' initializer [-Wmissing-field-initializers]
{ NULL }
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221220142520.24094-4-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221220142520.24094-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The pointed MouseTransformInfo structure is accessed read-only.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221220142520.24094-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"Host Memory Backends" and "Memory devices" queue ("mem"):
- virtio-mem fixes
- Use new MPOL_PREFERRED_MANY mbind() policy for memory backends if
possible
-----BEGIN PGP SIGNATURE-----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=aVS3
-----END PGP SIGNATURE-----
Merge tag 'mem-2023-01-02' of https://github.com/davidhildenbrand/qemu into staging
Hi,
"Host Memory Backends" and "Memory devices" queue ("mem"):
- virtio-mem fixes
- Use new MPOL_PREFERRED_MANY mbind() policy for memory backends if
possible
# gpg: Signature made Mon 02 Jan 2023 11:22:04 GMT
# gpg: using RSA key 1BD9CAAD735C4C3A460DFCCA4DDE10F700FF835A
# gpg: issuer "david@redhat.com"
# gpg: Good signature from "David Hildenbrand <david@redhat.com>" [marginal]
# gpg: aka "David Hildenbrand <davidhildenbrand@gmail.com>" [full]
# gpg: aka "David Hildenbrand <hildenbr@in.tum.de>" [unknown]
# Primary key fingerprint: 1BD9 CAAD 735C 4C3A 460D FCCA 4DDE 10F7 00FF 835A
* tag 'mem-2023-01-02' of https://github.com/davidhildenbrand/qemu:
hostmem: Honor multiple preferred nodes if possible
virtio-mem: Fix typo in function name
virtio-mem: Fix the iterator variable in a vmem->rdl_list loop
virtio-mem: Fix the bitmap index of the section offset
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove some unused headers.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-id: 20221213190537.511-7-farosas@suse.de
[added back some includes that are still needed at this point]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix the following:
ERROR: spaces required around that '|' (ctx:VxV)
ERROR: space required before the open parenthesis '('
ERROR: spaces required around that '+' (ctx:VxB)
ERROR: space prohibited between function name and open parenthesis '('
(the last two still have some occurrences in macros which I left
behind because it might impact readability)
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20221213190537.511-3-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix these:
WARNING: Block comments use a leading /* on a separate line
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20221213190537.511-2-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- fix#1263 for CR writes
- rework compare time handling
- The compare timer has to run even if CR.OCIEN is not set,
as SR.OCIF must be updated.
- The compare timer fires exactly once when the
compare value is less than the current value, but the
reload values is less than the compare value.
- The compare timer will never fire if the reload value is
less than the compare value. Disable it in this case.
Signed-off-by: Axel Heider <axel.heider@hensoldt.net>
[PMM: fixed minor style nits]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CNT register is a read-only register. There is no need to
store it's value, it can be calculated on demand.
The calculated frequency is needed temporarily only.
Note that this is a migration compatibility break for all boards
types that use the EPIT peripheral.
Signed-off-by: Axel Heider <axel.heider@hensoldt.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Axel Heider <axel.heider@hensoldt.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Axel Heider <axel.heider@hensoldt.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The interrupt state can change due to:
- reset clears both SR.OCIF and CR.OCIE
- write to CR.EN or CR.OCIE
Signed-off-by: Axel Heider <axel.heider@hensoldt.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix typos, add background information
Signed-off-by: Axel Heider <axel.heider@hensoldt.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The check semihosting_enabled() wants to know if the guest is
currently in user mode. Unlike the other cases the test was inverted
causing us to block semihosting calls in non-EL0 modes.
Cc: qemu-stable@nongnu.org
Fixes: 19b26317e9 (target/arm: Honour -semihosting-config userspace=on)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All constants are taken from the ARM Cortex-R52 Processor TRM Revision: r1p3
Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221206102504.165775-8-tobias.roehmel@rwth-aachen.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ARMv8-R AArch32 CPUs behave as if TTBCR.EAE is always 1 even
tough they don't have the TTBCR register.
See ARM Architecture Reference Manual Supplement - ARMv8, for the ARMv8-R
AArch32 architecture profile Version:A.c section C1.2.
Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221206102504.165775-5-tobias.roehmel@rwth-aachen.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The v8R PMSAv8 has a two-stage MPU translation process, but, unlike
VMSAv8, the stage 2 attributes are in the same format as the stage 1
attributes (8-bit MAIR format). Rather than converting the MAIR
format to the format used for VMSA stage 2 (bits [5:2] of a VMSA
stage 2 descriptor) and then converting back to do the attribute
combination, allow combined_attrs_nofwb() to accept s2 attributes
that are already in the MAIR format.
We move the assert() to combined_attrs_fwb(), because that function
really does require a VMSA stage 2 attribute format. (We will never
get there for v8R, because PMSAv8 does not implement FEAT_S2FWB.)
Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221206102504.165775-4-tobias.roehmel@rwth-aachen.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
RVBAR shadows RVBAR_ELx where x is the highest exception
level if the highest EL is not EL3. This patch also allows
ARMv8 CPUs to change the reset address with
the rvbar property.
Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221206102504.165775-3-tobias.roehmel@rwth-aachen.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cores with PMSA have the MPUIR register which has the
same encoding as the MIDR alias with opc2=4. So we only
add that alias if we are not realizing a core that
implements PMSA.
Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221206102504.165775-2-tobias.roehmel@rwth-aachen.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In get_phys_addr_twostage() we set the lg_page_size of the result to
the maximum of the stage 1 and stage 2 page sizes. This works for
the case where we do want to create a TLB entry, because we know the
common TLB code only creates entries of the TARGET_PAGE_SIZE and
asking for a size larger than that only means that invalidations
invalidate the whole larger area. However, if lg_page_size is
smaller than TARGET_PAGE_SIZE this effectively means "don't create a
TLB entry"; in this case if either S1 or S2 said "this covers less
than a page and can't go in a TLB" then the final result also should
be marked that way. Set the resulting page size to 0 if either
stage asked for a less-than-a-page entry, and expand the comment
to explain what's going on.
This has no effect for VMSA because currently the VMSA lookup always
returns results that cover at least TARGET_PAGE_SIZE; however when we
add v8R support it will reuse this code path, and for v8R the S1 and
S2 results can be smaller than TARGET_PAGE_SIZE.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221212142708.610090-1-peter.maydell@linaro.org
The windows jobs (especially the 32-bit job) recently started to
hit the timeout limit. Bump it a little bit to ease the situation
(80 minutes is quite long already - OTOH, these jobs do not have to
wait for a job from the container stage to finish, so this should
still be OK).
Additionally, some update on the container side recently enabled
OpenGL in these jobs - but the corresponding code fails to compile.
Thus disable OpenGL here for the time being until someone figured
out the proper fix in the shader code for this.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20230104123559.277586-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Newer flake8 versions are a bit pickier about the config file, and my
in-line comment confuses the parser. Fix it.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Message-id: 20221203005234.620788-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
If we request a shutdown of a VM without a QMP console, we'll just hang
waiting. Not ideal.
Add in code that attempts graceful termination in these cases. Tested
lightly; it appears to work and I doubt we rely on this case anywhere,
but it's a corner you're allowed to wedge yourself in, so it should be
handled.
Signed-off-by: John Snow <jsnow@redhat.com>
When key decisions are made about the lifetime of the VM process being
managed, there's no log entry. Juxtaposed with the very verbose runstate
change logging of the QMP module, machine seems a bit too introverted
now.
Season the machine.py module with logging statements to taste to help
make a tastier soup.
Signed-off-by: John Snow <jsnow@redhat.com>
- fix minor shell-ism that can break check-tcg
- turn off verbose logging on custom runners
- make configure echo call in CI
- fix unused variable in linux-test
- add binary compiler docker image for hexagon
- disable doc and gui builds for tci and disable-tcg builds
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmOlxtEACgkQ+9DbCVqe
KkR/VwgAlgPHfM4JQoG320kWNd/TuB/9NOaBSD/VINyx+uDlbix4NZ16Ij6I6JaG
mOxOAg1RVVUipul7lz4LTh8caKr5c4S+70hZlLxiKSbqkxUlqAdE0TLO88f1xx6q
qBrVQj5YoWBLH0sgsLj+QHhCpP8IGYl/hFjzYA0xbnllt15uiYXoHshBh8/YODnX
UjgGvzABoqlnEh/QD3pT8B5VyCUbF8j46CWWOV+XPSbRrf1FnrNgFIn5kdOJt+jE
cjPaMZSTpP4W5qZWB7xQNhQdBZvnKQV95gUvtEwdmwlpCr8rDfYsRcI8qRpAbHeL
XaDwHuG7Uo9OQf++4K9voH7TptAcqQ==
=0Yp9
-----END PGP SIGNATURE-----
Merge tag 'pull-testing-next-231222-1' of https://gitlab.com/stsquad/qemu into staging
testing updates:
- fix minor shell-ism that can break check-tcg
- turn off verbose logging on custom runners
- make configure echo call in CI
- fix unused variable in linux-test
- add binary compiler docker image for hexagon
- disable doc and gui builds for tci and disable-tcg builds
# gpg: Signature made Fri 23 Dec 2022 15:18:41 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-testing-next-231222-1' of https://gitlab.com/stsquad/qemu:
gitlab-ci: Disable docs and GUIs for the build-tci and build-tcg-disabled jobs
tests/docker: use prebuilt toolchain for debian-hexagon-cross
tests/tcg: fix unused variable in linux-test
configure: repeat ourselves for the benefit of CI
gitlab: turn off verbose logging for make check on custom runners
configure: Fix check-tcg not executing any tests
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Next preparatory patches for upcoming Windows host support.
* Cleanup patches.
-----BEGIN PGP SIGNATURE-----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=3XCu
-----END PGP SIGNATURE-----
Merge tag 'pull-9p-20221223' of https://github.com/cschoenebeck/qemu into staging
9pfs: Windows host prep, cleanup
* Next preparatory patches for upcoming Windows host support.
* Cleanup patches.
# gpg: Signature made Fri 23 Dec 2022 11:04:26 GMT
# gpg: using RSA key 96D8D110CF7AF8084F88590134C2B58765A47395
# gpg: issuer "qemu_oss@crudebyte.com"
# gpg: Good signature from "Christian Schoenebeck <qemu_oss@crudebyte.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: ECAB 1A45 4014 1413 BA38 4926 30DB 47C3 A012 D5F4
# Subkey fingerprint: 96D8 D110 CF7A F808 4F88 5901 34C2 B587 65A4 7395
* tag 'pull-9p-20221223' of https://github.com/cschoenebeck/qemu:
hw/9pfs: Replace the direct call to xxxat() APIs with a wrapper
hw/9pfs: Drop unnecessary *xattr wrapper API declarations
qemu/xattr.h: Exclude <sys/xattr.h> for Windows
MAINTAINERS: Add 9p test client to section "virtio-9p"
9pfs: Fix some return statements in the synth backend
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If a memory-backend is configured with mode
HOST_MEM_POLICY_PREFERRED then
host_memory_backend_memory_complete() calls mbind() as:
mbind(..., MPOL_PREFERRED, nodemask, ...);
Here, 'nodemask' is a bitmap of host NUMA nodes and corresponds
to the .host-nodes attribute. Therefore, there can be multiple
nodes specified. However, the documentation to MPOL_PREFERRED
says:
MPOL_PREFERRED
This mode sets the preferred node for allocation. ...
If nodemask specifies more than one node ID, the first node
in the mask will be selected as the preferred node.
Therefore, only the first node is honored and the rest is
silently ignored. Well, with recent changes to the kernel and
numactl we can do better.
The Linux kernel added in v5.15 via commit cfcaa66f8032
("mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY")
support for MPOL_PREFERRED_MANY, which accepts multiple preferred
NUMA nodes instead.
Then, numa_has_preferred_many() API was introduced to numactl
(v2.0.15~26) allowing applications to query kernel support.
Wiring this all together, we can pass MPOL_PREFERRED_MANY to the
mbind() call instead and stop ignoring multiple nodes, silently.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <a0b4adce1af5bd2344c2218eb4a04b3ff7bcfdb4.1671097918.git.mprivozn@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221228130956.80515-1-philmd@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
It should be the variable rdl2 to revert the already-notified listeners.
Fixes: 2044969f0b ("virtio-mem: Implement RamDiscardManager interface")
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20221228090312.17276-1-chenyi.qiang@intel.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
vmem->bitmap indexes the memory region of the virtio-mem backend at a
granularity of block_size. To calculate the index of target section offset,
the block_size should be divided instead of the bitmap_size.
Fixes: 2044969f0b ("virtio-mem: Implement RamDiscardManager interface")
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20221216062231.11181-1-chenyi.qiang@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: David Hildenbrand <david@redhat.com>
These jobs use their own "script:" section and thus do not profit from
the global "--disable-docs" from the template. While we're at it, disable
also some GUI front ends here since we do not gain any additional test
coverage by compiling those here again.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221208135945.99975-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221221090411.1995037-7-alex.bennee@linaro.org>
