motorhead/qemu
1
0
Fork 0
mirror of https://github.com/Motorhead1991/qemu.git synced 2025-08-04 08:13:54 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

aspeed/scu: introduce clock frequencies

Browse source 
All Aspeed SoC clocks are driven by an input source clock which can
have different frequencies : 24MHz or 25MHz, and also, on the Aspeed
AST2400 SoC, 48MHz. The H-PLL (CPU) clock is defined from a
calculation using parameters in the H-PLL Parameter register or from a
predefined set of frequencies if the setting is strapped by hardware
(Aspeed AST2400 SoC). The other clocks of the SoC are then defined
from the H-PLL using dividers.

We introduce first the APB clock because it should be used to drive
the Aspeed timer model.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 20180622075700.5923-2-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit is contained in:
Cédric Le Goater 2018-06-26 17:50:42 +01:00 • committed by Peter Maydell
parent 832e4222c8
commit fda9aaa60e
2 changed files with 172 additions and 4 deletions
Download patch file Download diff file Expand all files Collapse all files

70
include/hw/misc/aspeed_scu.h
View file

@ -30,6 +30,10 @@ typedef struct AspeedSCUState {
uint32_t hw_strap1;
uint32_t hw_strap2;
uint32_t hw_prot_key;
uint32_t clkin;
uint32_t hpll;
uint32_t apb_freq;
} AspeedSCUState;
#define AST2400_A0_SILICON_REV 0x02000303U
@ -58,7 +62,64 @@ extern bool is_supported_silicon_rev(uint32_t silicon_rev);
* 1. 2012/12/29 Ryan Chen Create
*/
/* Hardware Strapping Register definition (for Aspeed AST2400 SOC)
/* SCU08 Clock Selection Register
*
* 31 Enable Video Engine clock dynamic slow down
* 30:28 Video Engine clock slow down setting
* 27 2D Engine GCLK clock source selection
* 26 2D Engine GCLK clock throttling enable
* 25:23 APB PCLK divider selection
* 22:20 LPC Host LHCLK divider selection
* 19 LPC Host LHCLK clock generation/output enable control
* 18:16 MAC AHB bus clock divider selection
* 15 SD/SDIO clock running enable
* 14:12 SD/SDIO divider selection
* 11 Reserved
* 10:8 Video port output clock delay control bit
* 7 ARM CPU/AHB clock slow down enable
* 6:4 ARM CPU/AHB clock slow down setting
* 3:2 ECLK clock source selection
* 1 CPU/AHB clock slow down idle timer
* 0 CPU/AHB clock dynamic slow down enable (defined in bit[6:4])
*/
#define SCU_CLK_GET_PCLK_DIV(x) (((x) >> 23) & 0x7)
/* SCU24 H-PLL Parameter Register (for Aspeed AST2400 SOC)
*
* 18 H-PLL parameter selection
* 0: Select H-PLL by strapping resistors
* 1: Select H-PLL by the programmed registers (SCU24[17:0])
* 17 Enable H-PLL bypass mode
* 16 Turn off H-PLL
* 10:5 H-PLL Numerator
* 4 H-PLL Output Divider
* 3:0 H-PLL Denumerator
*
* (Output frequency) = 24MHz * (2-OD) * [(Numerator+2) / (Denumerator+1)]
*/
#define SCU_AST2400_H_PLL_PROGRAMMED (0x1 << 18)
#define SCU_AST2400_H_PLL_BYPASS_EN (0x1 << 17)
#define SCU_AST2400_H_PLL_OFF (0x1 << 16)
/* SCU24 H-PLL Parameter Register (for Aspeed AST2500 SOC)
*
* 21 Enable H-PLL reset
* 20 Enable H-PLL bypass mode
* 19 Turn off H-PLL
* 18:13 H-PLL Post Divider
* 12:5 H-PLL Numerator (M)
* 4:0 H-PLL Denumerator (N)
*
* (Output frequency) = CLKIN(24MHz) * [(M+1) / (N+1)] / (P+1)
*
* The default frequency is 792Mhz when CLKIN = 24MHz
*/
#define SCU_H_PLL_BYPASS_EN (0x1 << 20)
#define SCU_H_PLL_OFF (0x1 << 19)
/* SCU70 Hardware Strapping Register definition (for Aspeed AST2400 SOC)
*
* 31:29 Software defined strapping registers
* 28:27 DRAM size setting (for VGA driver use)
@ -107,12 +168,13 @@ extern bool is_supported_silicon_rev(uint32_t silicon_rev);
#define SCU_AST2400_HW_STRAP_GET_CLK_SOURCE(x) (((((x) >> 23) & 0x1) << 1) \
| (((x) >> 18) & 0x1))
#define SCU_AST2400_HW_STRAP_CLK_SOURCE_MASK ((0x1 << 23) | (0x1 << 18))
#define AST2400_CLK_25M_IN (0x1 << 23)
#define SCU_HW_STRAP_CLK_25M_IN (0x1 << 23)
#define AST2400_CLK_24M_IN 0
#define AST2400_CLK_48M_IN 1
#define AST2400_CLK_25M_IN_24M_USB_CKI 2
#define AST2400_CLK_25M_IN_48M_USB_CKI 3
#define SCU_HW_STRAP_CLK_48M_IN (0x1 << 18)
#define SCU_HW_STRAP_2ND_BOOT_WDT (0x1 << 17)
#define SCU_HW_STRAP_SUPER_IO_CONFIG (0x1 << 16)
#define SCU_HW_STRAP_VGA_CLASS_CODE (0x1 << 15)
@ -160,8 +222,8 @@ extern bool is_supported_silicon_rev(uint32_t silicon_rev);
#define AST2400_DIS_BOOT 3
/*
* Hardware strapping register definition (for Aspeed AST2500 SoC and
* higher)
* SCU70 Hardware strapping register definition (for Aspeed AST2500
* SoC and higher)
*
* 31 Enable SPI Flash Strap Auto Fetch Mode
* 30 Enable GPIO Strap Mode