qapi: Rename target.json to misc-target.json

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-14-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>

qapi/misc-target.json

@@ -0,0 +1,268 @@
+# -*- Mode: Python -*-
+#
+
+##
+# @RTC_CHANGE:
+#
+# Emitted when the guest changes the RTC time.
+#
+# @offset: offset between base RTC clock (as specified by -rtc base), and
+#          new RTC clock value
+#
+# Note: This event is rate-limited.
+#
+# Since: 0.13.0
+#
+# Example:
+#
+# <-   { "event": "RTC_CHANGE",
+#        "data": { "offset": 78 },
+#        "timestamp": { "seconds": 1267020223, "microseconds": 435656 } }
+#
+##
+{ 'event': 'RTC_CHANGE',
+  'data': { 'offset': 'int' },
+  'if': 'defined(TARGET_ALPHA) || defined(TARGET_ARM) || defined(TARGET_HPPA) || defined(TARGET_I386) || defined(TARGET_MIPS) || defined(TARGET_MIPS64) || defined(TARGET_MOXIE) || defined(TARGET_PPC) || defined(TARGET_PPC64) || defined(TARGET_S390X) || defined(TARGET_SH4) || defined(TARGET_SPARC)' }
+
+##
+# @rtc-reset-reinjection:
+#
+# This command will reset the RTC interrupt reinjection backlog.
+# Can be used if another mechanism to synchronize guest time
+# is in effect, for example QEMU guest agent's guest-set-time
+# command.
+#
+# Since: 2.1
+#
+# Example:
+#
+# -> { "execute": "rtc-reset-reinjection" }
+# <- { "return": {} }
+#
+##
+{ 'command': 'rtc-reset-reinjection',
+  'if': 'defined(TARGET_I386)' }
+
+
+##
+# @SevState:
+#
+# An enumeration of SEV state information used during @query-sev.
+#
+# @uninit: The guest is uninitialized.
+#
+# @launch-update: The guest is currently being launched; plaintext data and
+#                 register state is being imported.
+#
+# @launch-secret: The guest is currently being launched; ciphertext data
+#                 is being imported.
+#
+# @running: The guest is fully launched or migrated in.
+#
+# @send-update: The guest is currently being migrated out to another machine.
+#
+# @receive-update: The guest is currently being migrated from another machine.
+#
+# Since: 2.12
+##
+{ 'enum': 'SevState',
+  'data': ['uninit', 'launch-update', 'launch-secret', 'running',
+           'send-update', 'receive-update' ],
+  'if': 'defined(TARGET_I386)' }
+
+##
+# @SevInfo:
+#
+# Information about Secure Encrypted Virtualization (SEV) support
+#
+# @enabled: true if SEV is active
+#
+# @api-major: SEV API major version
+#
+# @api-minor: SEV API minor version
+#
+# @build-id: SEV FW build id
+#
+# @policy: SEV policy value
+#
+# @state: SEV guest state
+#
+# @handle: SEV firmware handle
+#
+# Since: 2.12
+##
+{ 'struct': 'SevInfo',
+    'data': { 'enabled': 'bool',
+              'api-major': 'uint8',
+              'api-minor' : 'uint8',
+              'build-id' : 'uint8',
+              'policy' : 'uint32',
+              'state' : 'SevState',
+              'handle' : 'uint32'
+            },
+  'if': 'defined(TARGET_I386)'
+}
+
+##
+# @query-sev:
+#
+# Returns information about SEV
+#
+# Returns: @SevInfo
+#
+# Since: 2.12
+#
+# Example:
+#
+# -> { "execute": "query-sev" }
+# <- { "return": { "enabled": true, "api-major" : 0, "api-minor" : 0,
+#                  "build-id" : 0, "policy" : 0, "state" : "running",
+#                  "handle" : 1 } }
+#
+##
+{ 'command': 'query-sev', 'returns': 'SevInfo',
+  'if': 'defined(TARGET_I386)' }
+
+
+##
+# @SevLaunchMeasureInfo:
+#
+# SEV Guest Launch measurement information
+#
+# @data: the measurement value encoded in base64
+#
+# Since: 2.12
+#
+##
+{ 'struct': 'SevLaunchMeasureInfo', 'data': {'data': 'str'},
+  'if': 'defined(TARGET_I386)' }
+
+##
+# @query-sev-launch-measure:
+#
+# Query the SEV guest launch information.
+#
+# Returns: The @SevLaunchMeasureInfo for the guest
+#
+# Since: 2.12
+#
+# Example:
+#
+# -> { "execute": "query-sev-launch-measure" }
+# <- { "return": { "data": "4l8LXeNlSPUDlXPJG5966/8%YZ" } }
+#
+##
+{ 'command': 'query-sev-launch-measure', 'returns': 'SevLaunchMeasureInfo',
+  'if': 'defined(TARGET_I386)' }
+
+
+##
+# @SevCapability:
+#
+# The struct describes capability for a Secure Encrypted Virtualization
+# feature.
+#
+# @pdh:  Platform Diffie-Hellman key (base64 encoded)
+#
+# @cert-chain:  PDH certificate chain (base64 encoded)
+#
+# @cbitpos: C-bit location in page table entry
+#
+# @reduced-phys-bits: Number of physical Address bit reduction when SEV is
+#                     enabled
+#
+# Since: 2.12
+##
+{ 'struct': 'SevCapability',
+  'data': { 'pdh': 'str',
+            'cert-chain': 'str',
+            'cbitpos': 'int',
+            'reduced-phys-bits': 'int'},
+  'if': 'defined(TARGET_I386)' }
+
+##
+# @query-sev-capabilities:
+#
+# This command is used to get the SEV capabilities, and is supported on AMD
+# X86 platforms only.
+#
+# Returns: SevCapability objects.
+#
+# Since: 2.12
+#
+# Example:
+#
+# -> { "execute": "query-sev-capabilities" }
+# <- { "return": { "pdh": "8CCDD8DDD", "cert-chain": "888CCCDDDEE",
+#                  "cbitpos": 47, "reduced-phys-bits": 5}}
+#
+##
+{ 'command': 'query-sev-capabilities', 'returns': 'SevCapability',
+  'if': 'defined(TARGET_I386)' }
+
+##
+# @dump-skeys:
+#
+# Dump guest's storage keys
+#
+# @filename: the path to the file to dump to
+#
+# This command is only supported on s390 architecture.
+#
+# Since: 2.5
+#
+# Example:
+#
+# -> { "execute": "dump-skeys",
+#      "arguments": { "filename": "/tmp/skeys" } }
+# <- { "return": {} }
+#
+##
+{ 'command': 'dump-skeys',
+  'data': { 'filename': 'str' },
+  'if': 'defined(TARGET_S390X)' }
+
+##
+# @GICCapability:
+#
+# The struct describes capability for a specific GIC (Generic
+# Interrupt Controller) version. These bits are not only decided by
+# QEMU/KVM software version, but also decided by the hardware that
+# the program is running upon.
+#
+# @version:  version of GIC to be described. Currently, only 2 and 3
+#            are supported.
+#
+# @emulated: whether current QEMU/hardware supports emulated GIC
+#            device in user space.
+#
+# @kernel:   whether current QEMU/hardware supports hardware
+#            accelerated GIC device in kernel.
+#
+# Since: 2.6
+##
+{ 'struct': 'GICCapability',
+  'data': { 'version': 'int',
+            'emulated': 'bool',
+            'kernel': 'bool' },
+  'if': 'defined(TARGET_ARM)' }
+
+##
+# @query-gic-capabilities:
+#
+# This command is ARM-only. It will return a list of GICCapability
+# objects that describe its capability bits.
+#
+# Returns: a list of GICCapability objects.
+#
+# Since: 2.6
+#
+# Example:
+#
+# -> { "execute": "query-gic-capabilities" }
+# <- { "return": [{ "version": 2, "emulated": true, "kernel": false },
+#                 { "version": 3, "emulated": false, "kernel": true } ] }
+#
+##
+{ 'command': 'query-gic-capabilities', 'returns': ['GICCapability'],
+  'if': 'defined(TARGET_ARM)' }