From 51ac481bff88723ef4c101925082fab03bba200a Mon Sep 17 00:00:00 2001 From: Jamin Lin Date: Wed, 18 Jun 2025 16:00:04 +0800 Subject: [PATCH 01/11] hw/misc/aspeed_sdmc: Skipping dram_init in u-boot for AST2700 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On AST2700 SoC, QEMU now sets BIT6 in VGA0 SCRATCH register to indicate that DDR training has completed, thus skipping the dram_init(). To align with the recent U-Boot changes, where the Main Control Register's BIT16 is checked to skip the dram_init() process, this patch sets BIT16 in the SDMC Main Control Register at reset time. This allows both the main U-Boot stage to correctly detect and bypass DRAM initialization when running under QEMU. Reference: - QEMU: https://github.com/qemu/qemu/commit/2d082fea485ee455a70ed3e963cdf9a70f34858a - U-Boot: https://github.com/AspeedTech-BMC/u-boot/commit/94e5435504fb0d8888f5c1bfd3fa284cdd6aaf9b Signed-off-by: Jamin Lin Reviewed-by: Cédric Le Goater Link: https://lore.kernel.org/qemu-devel/20250618080006.846355-2-jamin_lin@aspeedtech.com Signed-off-by: Cédric Le Goater --- hw/misc/aspeed_sdmc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/hw/misc/aspeed_sdmc.c b/hw/misc/aspeed_sdmc.c index f04d9930dd..dff7cc362d 100644 --- a/hw/misc/aspeed_sdmc.c +++ b/hw/misc/aspeed_sdmc.c @@ -570,6 +570,9 @@ static void aspeed_2700_sdmc_reset(DeviceState *dev) /* Set ram size bit and defaults values */ s->regs[R_MAIN_CONF] = asc->compute_conf(s, 0); + /* Skipping dram init */ + s->regs[R_MAIN_CONTROL] = BIT(16); + if (s->unlocked) { s->regs[R_2700_PROT] = PROT_UNLOCKED; } From a6ca5dfccc2b584d2f7bf31fb488fc178e967972 Mon Sep 17 00:00:00 2001 From: Jamin Lin Date: Wed, 18 Jun 2025 16:00:05 +0800 Subject: [PATCH 02/11] hw/misc/aspeed_scu: Support the Frequency Counter Control register for AST2700 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According to the datasheet: BIT[1] (SCU_FREQ_OSC_EN) enables the oscillator frequency measurement counter. BIT[6] (SCU_FREQ_DONE) indicates the measurement is finished. Firmware polls BIT[6] to determine when measurement is complete. The flag can be cleared by writing BIT[1] to 0. To simulate this hardware behavior in QEMU: If BIT[1] is set to 1, BIT[6] is immediately set to 1 to avoid firmware hanging during polling. If BIT[1] is cleared to 0, BIT[6] is also cleared to 0 to match hardware semantics. The initial value of this register is initialized to 0x80, reflecting the default value confirmed from an EVB register dump. Signed-off-by: Jamin Lin Reviewed-by: Cédric Le Goater Link: https://lore.kernel.org/qemu-devel/20250618080006.846355-3-jamin_lin@aspeedtech.com Signed-off-by: Cédric Le Goater --- hw/misc/aspeed_scu.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/hw/misc/aspeed_scu.c b/hw/misc/aspeed_scu.c index 4930e00fed..11d0739108 100644 --- a/hw/misc/aspeed_scu.c +++ b/hw/misc/aspeed_scu.c @@ -176,6 +176,7 @@ #define AST2700_SCUIO_UARTCLK_GEN TO_REG(0x330) #define AST2700_SCUIO_HUARTCLK_GEN TO_REG(0x334) #define AST2700_SCUIO_CLK_DUTY_MEAS_RST TO_REG(0x388) +#define AST2700_SCUIO_FREQ_CNT_CTL TO_REG(0x3A0) #define SCU_IO_REGION_SIZE 0x1000 @@ -1022,6 +1023,10 @@ static void aspeed_ast2700_scuio_write(void *opaque, hwaddr offset, s->regs[reg - 1] ^= data; updated = true; break; + case AST2700_SCUIO_FREQ_CNT_CTL: + s->regs[reg] = deposit32(s->regs[reg], 6, 1, !!(data & BIT(1))); + updated = true; + break; default: qemu_log_mask(LOG_GUEST_ERROR, "%s: Unhandled write at offset 0x%" HWADDR_PRIx "\n", @@ -1066,6 +1071,7 @@ static const uint32_t ast2700_a0_resets_io[ASPEED_AST2700_SCU_NR_REGS] = { [AST2700_SCUIO_UARTCLK_GEN] = 0x00014506, [AST2700_SCUIO_HUARTCLK_GEN] = 0x000145c0, [AST2700_SCUIO_CLK_DUTY_MEAS_RST] = 0x0c9100d2, + [AST2700_SCUIO_FREQ_CNT_CTL] = 0x00000080, }; static void aspeed_2700_scuio_class_init(ObjectClass *klass, const void *data) From 126c56b067d6a68840542f8dc7afdec9b69caa83 Mon Sep 17 00:00:00 2001 From: Patrick Williams Date: Wed, 18 Jun 2025 23:58:50 -0400 Subject: [PATCH 03/11] hw/arm/aspeed: bletchley: update hw strap values MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Update the Bletchley hardware strap register values per actual hardware: ``` root@bmc:~# devmem 0x1e6e2500 0x00002000 root@bmc:~# devmem 0x1e6e2510 0x00000801 ``` Signed-off-by: Patrick Williams Reviewed-by: Cédric Le Goater Link: https://lore.kernel.org/qemu-devel/20250619035850.2682690-1-patrick@stwcx.xyz Signed-off-by: Cédric Le Goater --- hw/arm/aspeed.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index d0b333646e..5662cb2c4a 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -197,9 +197,8 @@ struct AspeedMachineState { #define FUJI_BMC_HW_STRAP2 0x00000000 /* Bletchley hardware value */ -/* TODO: Leave same as EVB for now. */ -#define BLETCHLEY_BMC_HW_STRAP1 AST2600_EVB_HW_STRAP1 -#define BLETCHLEY_BMC_HW_STRAP2 AST2600_EVB_HW_STRAP2 +#define BLETCHLEY_BMC_HW_STRAP1 0x00002000 +#define BLETCHLEY_BMC_HW_STRAP2 0x00000801 /* Qualcomm DC-SCM hardware value */ #define QCOM_DC_SCM_V1_BMC_HW_STRAP1 0x00000000 From 8e076a3f1b1ed0fc009ee25796e45c44b4cf74f9 Mon Sep 17 00:00:00 2001 From: Patrick Williams Date: Thu, 19 Jun 2025 11:14:58 -0400 Subject: [PATCH 04/11] hw/arm/aspeed: add Catalina machine type MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add the 'catalina-bmc' machine type based on the kernel DTS[1] as of 6.16-rc2. The i2c model is as complete as the current QEMU models support, but in some cases I substituted devices that are close enough for present functionality. Strap registers are were verified with hardware. This has been tested with an openbmc image built from [2]. Add a functional test in line with Bletchley, pointing at an image obtained from the OpenBMC Jenkins server. [1]: https://github.com/torvalds/linux/blob/v6.16-rc2/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts [2]: https://github.com/openbmc/openbmc/commit/5bc73ec261f981d5e586bda5ac78eb0cbd5f92b0 Signed-off-by: Patrick Williams Reviewed-by: Cédric Le Goater Link: https://lore.kernel.org/qemu-devel/20250619151458.2831859-1-patrick@stwcx.xyz Signed-off-by: Cédric Le Goater --- hw/arm/Kconfig | 1 + hw/arm/aspeed.c | 200 +++++++++++++++++++ tests/functional/meson.build | 2 + tests/functional/test_arm_aspeed_catalina.py | 25 +++ 4 files changed, 228 insertions(+) create mode 100755 tests/functional/test_arm_aspeed_catalina.py diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index f543d944c3..6ea86534d5 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -532,6 +532,7 @@ config ASPEED_SOC select I2C select DPS310 select PCA9552 + select PCA9554 select SERIAL_MM select SMBUS_EEPROM select PCA954X diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index 5662cb2c4a..94897505f8 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -19,6 +19,7 @@ #include "hw/i2c/i2c_mux_pca954x.h" #include "hw/i2c/smbus_eeprom.h" #include "hw/gpio/pca9552.h" +#include "hw/gpio/pca9554.h" #include "hw/nvram/eeprom_at24c.h" #include "hw/sensor/tmp105.h" #include "hw/misc/led.h" @@ -1002,6 +1003,180 @@ static void fuji_bmc_i2c_init(AspeedMachineState *bmc) } #define TYPE_TMP421 "tmp421" +#define TYPE_DS1338 "ds1338" + +/* Catalina hardware value */ +#define CATALINA_BMC_HW_STRAP1 0x00002002 +#define CATALINA_BMC_HW_STRAP2 0x00000800 + +#define CATALINA_BMC_RAM_SIZE ASPEED_RAM_SIZE(2 * GiB) + +static void catalina_bmc_i2c_init(AspeedMachineState *bmc) +{ + /* Reference from v6.16-rc2 aspeed-bmc-facebook-catalina.dts */ + + AspeedSoCState *soc = bmc->soc; + I2CBus *i2c[16] = {}; + I2CSlave *i2c_mux; + + /* busses 0-15 are all used. */ + for (int i = 0; i < ARRAY_SIZE(i2c); i++) { + i2c[i] = aspeed_i2c_get_bus(&soc->i2c, i); + } + + /* &i2c0 */ + /* i2c-mux@71 (PCA9546) on i2c0 */ + i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x71); + + /* i2c-mux@72 (PCA9546) on i2c0 */ + i2c_mux = i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x72); + + /* i2c0mux1ch1 */ + /* io_expander7 - pca9535@20 */ + i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 1), + TYPE_PCA9552, 0x20); + /* eeprom@50 */ + at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x50, 8 * KiB); + + /* i2c-mux@73 (PCA9546) on i2c0 */ + i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x73); + + /* i2c-mux@75 (PCA9546) on i2c0 */ + i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x75); + + /* i2c-mux@76 (PCA9546) on i2c0 */ + i2c_mux = i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x76); + + /* i2c0mux4ch1 */ + /* io_expander8 - pca9535@21 */ + i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 1), + TYPE_PCA9552, 0x21); + /* eeprom@50 */ + at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x50, 8 * KiB); + + /* i2c-mux@77 (PCA9546) on i2c0 */ + i2c_slave_create_simple(i2c[0], TYPE_PCA9546, 0x77); + + + /* &i2c1 */ + /* i2c-mux@70 (PCA9548) on i2c1 */ + i2c_mux = i2c_slave_create_simple(i2c[1], TYPE_PCA9548, 0x70); + /* i2c1mux0ch0 */ + /* ina238@41 - no model */ + /* ina238@42 - no model */ + /* ina238@44 - no model */ + /* i2c1mux0ch1 */ + /* ina238@41 - no model */ + /* ina238@43 - no model */ + /* i2c1mux0ch4 */ + /* ltc4287@42 - no model */ + /* ltc4287@43 - no model */ + + /* i2c1mux0ch5 */ + /* eeprom@54 */ + at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 5), 0x54, 8 * KiB); + /* tpm75@4f */ + i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 5), TYPE_TMP75, 0x4f); + + /* i2c1mux0ch6 */ + /* io_expander5 - pca9554@27 */ + i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 6), + TYPE_PCA9554, 0x27); + /* io_expander6 - pca9555@25 */ + i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 6), + TYPE_PCA9552, 0x25); + /* eeprom@51 */ + at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 6), 0x51, 8 * KiB); + + /* i2c1mux0ch7 */ + /* eeprom@53 */ + at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 7), 0x53, 8 * KiB); + /* temperature-sensor@4b - tmp75 */ + i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 7), TYPE_TMP75, 0x4b); + + /* &i2c2 */ + /* io_expander0 - pca9555@20 */ + i2c_slave_create_simple(i2c[2], TYPE_PCA9552, 0x20); + /* io_expander0 - pca9555@21 */ + i2c_slave_create_simple(i2c[2], TYPE_PCA9552, 0x21); + /* io_expander0 - pca9555@27 */ + i2c_slave_create_simple(i2c[2], TYPE_PCA9552, 0x27); + /* eeprom@50 */ + at24c_eeprom_init(i2c[2], 0x50, 8 * KiB); + /* eeprom@51 */ + at24c_eeprom_init(i2c[2], 0x51, 8 * KiB); + + /* &i2c5 */ + /* i2c-mux@70 (PCA9548) on i2c5 */ + i2c_mux = i2c_slave_create_simple(i2c[5], TYPE_PCA9548, 0x70); + /* i2c5mux0ch6 */ + /* eeprom@52 */ + at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 6), 0x52, 8 * KiB); + /* i2c5mux0ch7 */ + /* ina230@40 - no model */ + /* ina230@41 - no model */ + /* ina230@44 - no model */ + /* ina230@45 - no model */ + + /* &i2c6 */ + /* io_expander3 - pca9555@21 */ + i2c_slave_create_simple(i2c[6], TYPE_PCA9552, 0x21); + /* rtc@6f - nct3018y */ + i2c_slave_create_simple(i2c[6], TYPE_DS1338, 0x6f); + + /* &i2c9 */ + /* io_expander4 - pca9555@4f */ + i2c_slave_create_simple(i2c[9], TYPE_PCA9552, 0x4f); + /* temperature-sensor@4b - tpm75 */ + i2c_slave_create_simple(i2c[9], TYPE_TMP75, 0x4b); + /* eeprom@50 */ + at24c_eeprom_init(i2c[9], 0x50, 8 * KiB); + /* eeprom@56 */ + at24c_eeprom_init(i2c[9], 0x56, 8 * KiB); + + /* &i2c10 */ + /* temperature-sensor@1f - tpm421 */ + i2c_slave_create_simple(i2c[10], TYPE_TMP421, 0x1f); + /* eeprom@50 */ + at24c_eeprom_init(i2c[10], 0x50, 8 * KiB); + + /* &i2c11 */ + /* ssif-bmc@10 - no model */ + + /* &i2c12 */ + /* eeprom@50 */ + at24c_eeprom_init(i2c[12], 0x50, 8 * KiB); + + /* &i2c13 */ + /* eeprom@50 */ + at24c_eeprom_init(i2c[13], 0x50, 8 * KiB); + /* eeprom@54 */ + at24c_eeprom_init(i2c[13], 0x54, 256); + /* eeprom@55 */ + at24c_eeprom_init(i2c[13], 0x55, 256); + /* eeprom@57 */ + at24c_eeprom_init(i2c[13], 0x57, 256); + + /* &i2c14 */ + /* io_expander9 - pca9555@10 */ + i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x10); + /* io_expander10 - pca9555@11 */ + i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x11); + /* io_expander11 - pca9555@12 */ + i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x12); + /* io_expander12 - pca9555@13 */ + i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x13); + /* io_expander13 - pca9555@14 */ + i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x14); + /* io_expander14 - pca9555@15 */ + i2c_slave_create_simple(i2c[14], TYPE_PCA9552, 0x15); + + /* &i2c15 */ + /* temperature-sensor@1f - tmp421 */ + i2c_slave_create_simple(i2c[15], TYPE_TMP421, 0x1f); + /* eeprom@52 */ + at24c_eeprom_init(i2c[15], 0x52, 8 * KiB); +} static void bletchley_bmc_i2c_init(AspeedMachineState *bmc) { @@ -1584,6 +1759,27 @@ static void aspeed_machine_bletchley_class_init(ObjectClass *oc, aspeed_machine_class_init_cpus_defaults(mc); } +static void aspeed_machine_catalina_class_init(ObjectClass *oc, + const void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); + + mc->desc = "Facebook Catalina BMC (Cortex-A7)"; + amc->soc_name = "ast2600-a3"; + amc->hw_strap1 = CATALINA_BMC_HW_STRAP1; + amc->hw_strap2 = CATALINA_BMC_HW_STRAP2; + amc->fmc_model = "w25q01jvq"; + amc->spi_model = NULL; + amc->num_cs = 2; + amc->macs_mask = ASPEED_MAC2_ON; + amc->i2c_init = catalina_bmc_i2c_init; + mc->auto_create_sdcard = true; + mc->default_ram_size = CATALINA_BMC_RAM_SIZE; + aspeed_machine_class_init_cpus_defaults(mc); + aspeed_machine_ast2600_class_emmc_init(oc); +} + static void fby35_reset(MachineState *state, ResetType type) { AspeedMachineState *bmc = ASPEED_MACHINE(state); @@ -1876,6 +2072,10 @@ static const TypeInfo aspeed_machine_types[] = { .name = MACHINE_TYPE_NAME("bletchley-bmc"), .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_machine_bletchley_class_init, + }, { + .name = MACHINE_TYPE_NAME("catalina-bmc"), + .parent = TYPE_ASPEED_MACHINE, + .class_init = aspeed_machine_catalina_class_init, }, { .name = MACHINE_TYPE_NAME("fby35-bmc"), .parent = MACHINE_TYPE_NAME("ast2600-evb"), diff --git a/tests/functional/meson.build b/tests/functional/meson.build index b542b3a3af..fb87b957aa 100644 --- a/tests/functional/meson.build +++ b/tests/functional/meson.build @@ -32,6 +32,7 @@ test_timeouts = { 'arm_aspeed_ast2500' : 720, 'arm_aspeed_ast2600' : 1200, 'arm_aspeed_bletchley' : 480, + 'arm_aspeed_catalina' : 480, 'arm_aspeed_rainier' : 480, 'arm_bpim2u' : 500, 'arm_collie' : 180, @@ -127,6 +128,7 @@ tests_arm_system_thorough = [ 'arm_aspeed_ast2500', 'arm_aspeed_ast2600', 'arm_aspeed_bletchley', + 'arm_aspeed_catalina', 'arm_aspeed_rainier', 'arm_bpim2u', 'arm_canona1100', diff --git a/tests/functional/test_arm_aspeed_catalina.py b/tests/functional/test_arm_aspeed_catalina.py new file mode 100755 index 0000000000..dc2f24e7b4 --- /dev/null +++ b/tests/functional/test_arm_aspeed_catalina.py @@ -0,0 +1,25 @@ +#!/usr/bin/env python3 +# +# Functional test that boots the ASPEED machines +# +# SPDX-License-Identifier: GPL-2.0-or-later + +from qemu_test import Asset +from aspeed import AspeedTest + + +class CatalinaMachine(AspeedTest): + + ASSET_CATALINA_FLASH = Asset( + 'https://github.com/legoater/qemu-aspeed-boot/raw/a866feb5ef81245b4827a214584bf6bcc72939f6/images/catalina-bmc/obmc-phosphor-image-catalina-20250619123021.static.mtd.xz', + '287402e1ba021991e06be1d098f509444a02a3d81a73a932f66528b159e864f9') + + def test_arm_ast2600_catalina_openbmc(self): + image_path = self.uncompress(self.ASSET_CATALINA_FLASH) + + self.do_test_arm_aspeed_openbmc('catalina-bmc', image=image_path, + uboot='2019.04', cpu_id='0xf00', + soc='AST2600 rev A3') + +if __name__ == '__main__': + AspeedTest.main() From 10d1b6231b7fdbeb9c601af35f73c6353cbfe6c8 Mon Sep 17 00:00:00 2001 From: Tan Siewert Date: Thu, 19 Jun 2025 10:53:27 +0200 Subject: [PATCH 05/11] hw/misc/aspeed_scu: Handle AST2600 protection key registers correctly MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The AST2600 SCU has two protection key registers (0x00 and 0x10) that both need to be unlocked. (Un-)locking 0x00 modifies both protection key registers, while modifying 0x10 only modifies itself. This commit updates the SCU write logic to reject writes unless both protection key registers are unlocked, matching the behaviour of real hardware. Signed-off-by: Tan Siewert Reviewed-by: Jamin Lin Link: https://lore.kernel.org/qemu-devel/20250619085329.42125-1-tan@siewert.io Signed-off-by: Cédric Le Goater --- hw/misc/aspeed_scu.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/hw/misc/aspeed_scu.c b/hw/misc/aspeed_scu.c index 11d0739108..a0ab5eed8f 100644 --- a/hw/misc/aspeed_scu.c +++ b/hw/misc/aspeed_scu.c @@ -91,6 +91,7 @@ #define BMC_DEV_ID TO_REG(0x1A4) #define AST2600_PROT_KEY TO_REG(0x00) +#define AST2600_PROT_KEY2 TO_REG(0x10) #define AST2600_SILICON_REV TO_REG(0x04) #define AST2600_SILICON_REV2 TO_REG(0x14) #define AST2600_SYS_RST_CTRL TO_REG(0x40) @@ -723,6 +724,8 @@ static void aspeed_ast2600_scu_write(void *opaque, hwaddr offset, int reg = TO_REG(offset); /* Truncate here so bitwise operations below behave as expected */ uint32_t data = data64; + bool prot_data_state = data == ASPEED_SCU_PROT_KEY; + bool unlocked = s->regs[AST2600_PROT_KEY] && s->regs[AST2600_PROT_KEY2]; if (reg >= ASPEED_AST2600_SCU_NR_REGS) { qemu_log_mask(LOG_GUEST_ERROR, @@ -731,15 +734,24 @@ static void aspeed_ast2600_scu_write(void *opaque, hwaddr offset, return; } - if (reg > PROT_KEY && !s->regs[PROT_KEY]) { + if ((reg != AST2600_PROT_KEY && reg != AST2600_PROT_KEY2) && !unlocked) { qemu_log_mask(LOG_GUEST_ERROR, "%s: SCU is locked!\n", __func__); + return; } trace_aspeed_scu_write(offset, size, data); switch (reg) { case AST2600_PROT_KEY: - s->regs[reg] = (data == ASPEED_SCU_PROT_KEY) ? 1 : 0; + /* + * Writing a value to SCU000 will modify both protection + * registers to each protection register individually. + */ + s->regs[AST2600_PROT_KEY] = prot_data_state; + s->regs[AST2600_PROT_KEY2] = prot_data_state; + return; + case AST2600_PROT_KEY2: + s->regs[AST2600_PROT_KEY2] = prot_data_state; return; case AST2600_HW_STRAP1: case AST2600_HW_STRAP2: From 116bf243d9137a9101aa1a403b402b78313615bc Mon Sep 17 00:00:00 2001 From: Tan Siewert Date: Mon, 30 Jun 2025 13:26:46 +0200 Subject: [PATCH 06/11] tests/qtest: Add test for ASPEED SCU MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This adds basic tests for the ASPEED System Control Unit (SCU) and its protection mechanism on the AST2500 and AST2600 platforms. The tests verify: - That SCU protection registers can be unlocked and locked again - That modifying the primary protection register on AST2600 also affects the secondary one - That writes to protected SCU registers are blocked unless protection registers are unlocked explicitly These tests ensure proper emulation of hardware locking behaviour and help catch regressions in SCU access logic. Signed-off-by: Tan Siewert Reviewed-by: Cédric Le Goater Link: https://lore.kernel.org/qemu-devel/20250630112646.74944-1-tan@siewert.io [ clg: Reordered file list in meson.build ] Signed-off-by: Cédric Le Goater --- tests/qtest/aspeed_scu-test.c | 231 ++++++++++++++++++++++++++++++++++ tests/qtest/meson.build | 1 + 2 files changed, 232 insertions(+) create mode 100644 tests/qtest/aspeed_scu-test.c diff --git a/tests/qtest/aspeed_scu-test.c b/tests/qtest/aspeed_scu-test.c new file mode 100644 index 0000000000..ca09f9171f --- /dev/null +++ b/tests/qtest/aspeed_scu-test.c @@ -0,0 +1,231 @@ +/* + * QTest testcase for the ASPEED AST2500 and AST2600 SCU. + * + * SPDX-License-Identifier: GPL-2.0-or-later + * Copyright (C) 2025 Tan Siewert + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* + * SCU base, as well as protection key are + * the same on AST2500 and 2600. + */ +#define AST_SCU_BASE 0x1E6E2000 +#define AST_SCU_PROT_LOCK_STATE 0x0 +#define AST_SCU_PROT_LOCK_VALUE 0x2 +#define AST_SCU_PROT_UNLOCK_STATE 0x1 +#define AST_SCU_PROT_UNLOCK_VALUE 0x1688A8A8 + +#define AST2500_MACHINE "-machine ast2500-evb" +#define AST2500_SCU_PROT_REG 0x00 +#define AST2500_SCU_MISC_2_CONTROL_REG 0x4C + +#define AST2600_MACHINE "-machine ast2600-evb" +/* AST2600 has two protection registers */ +#define AST2600_SCU_PROT_REG 0x000 +#define AST2600_SCU_PROT_REG2 0x010 +#define AST2600_SCU_MISC_2_CONTROL_REG 0x0C4 + +#define TEST_LOCK_ARBITRARY_VALUE 0xABCDEFAB + +/** + * Assert that a given register matches an expected value. + * + * Reads the register and checks if its value equals the expected value. + * + * @param *s - QTest machine state + * @param reg - Address of the register to be checked + * @param expected - Expected register value + */ +static inline void assert_register_eq(QTestState *s, + uint32_t reg, + uint32_t expected) +{ + uint32_t value = qtest_readl(s, reg); + g_assert_cmphex(value, ==, expected); +} + +/** + * Assert that a given register does not match a specific value. + * + * Reads the register and checks that its value is not equal to the + * provided value. + * + * @param *s - QTest machine state + * @param reg - Address of the register to be checked + * @param not_expected - Value the register must not contain + */ +static inline void assert_register_neq(QTestState *s, + uint32_t reg, + uint32_t not_expected) +{ + uint32_t value = qtest_readl(s, reg); + g_assert_cmphex(value, !=, not_expected); +} + +/** + * Test whether the SCU can be locked and unlocked correctly. + * + * When testing multiple registers, this function assumes that writing + * to the first register also affects the others. However, writing to + * any other register only affects itself. + * + * @param *machine - input machine configuration, passed directly + * to QTest + * @param regs[] - List of registers to be checked + * @param regc - amount of arguments for registers to be checked + */ +static void test_protection_register(const char *machine, + const uint32_t regs[], + const int regc) +{ + QTestState *s = qtest_init(machine); + + for (int i = 0; i < regc; i++) { + uint32_t reg = regs[i]; + + qtest_writel(s, reg, AST_SCU_PROT_UNLOCK_VALUE); + assert_register_eq(s, reg, AST_SCU_PROT_UNLOCK_STATE); + + /** + * Check that other registers are unlocked too, if more + * than one is available. + */ + if (regc > 1 && i == 0) { + /* Initialise at 1 instead of 0 to skip first */ + for (int j = 1; j < regc; j++) { + uint32_t add_reg = regs[j]; + assert_register_eq(s, add_reg, AST_SCU_PROT_UNLOCK_STATE); + } + } + + /* Lock the register again */ + qtest_writel(s, reg, AST_SCU_PROT_LOCK_VALUE); + assert_register_eq(s, reg, AST_SCU_PROT_LOCK_STATE); + + /* And the same for locked state */ + if (regc > 1 && i == 0) { + /* Initialise at 1 instead of 0 to skip first */ + for (int j = 1; j < regc; j++) { + uint32_t add_reg = regs[j]; + assert_register_eq(s, add_reg, AST_SCU_PROT_LOCK_STATE); + } + } + } + + qtest_quit(s); +} + +static void test_2500_protection_register(void) +{ + uint32_t regs[] = { AST_SCU_BASE + AST2500_SCU_PROT_REG }; + + test_protection_register(AST2500_MACHINE, + regs, + ARRAY_SIZE(regs)); +} + +static void test_2600_protection_register(void) +{ + /** + * The AST2600 has two protection registers, both + * being required to be unlocked to do any operation. + * + * Modifying SCU000 also modifies SCU010, but modifying + * SCU010 only will keep SCU000 untouched. + */ + uint32_t regs[] = { AST_SCU_BASE + AST2600_SCU_PROT_REG, + AST_SCU_BASE + AST2600_SCU_PROT_REG2 }; + + test_protection_register(AST2600_MACHINE, + regs, + ARRAY_SIZE(regs)); +} + +/** + * Test if SCU register writes are correctly allowed or blocked + * depending on the protection register state. + * + * The test first locks the protection register and verifies that + * writes to the target SCU register are rejected. It then unlocks + * the protection register and confirms that the written value is + * retained when unlocked. + * + * @param *machine - input machine configuration, passed directly + * to QTest + * @param protection_register - first SCU protection key register + * (only one for keeping it simple) + * @param test_register - Register to be used for writing arbitrary + * values + */ +static void test_write_permission_lock_state(const char *machine, + const uint32_t protection_register, + const uint32_t test_register) +{ + QTestState *s = qtest_init(machine); + + /* Arbitrary value to lock provided SCU protection register */ + qtest_writel(s, protection_register, AST_SCU_PROT_LOCK_VALUE); + + /* Ensure that the SCU is really locked */ + assert_register_eq(s, protection_register, AST_SCU_PROT_LOCK_STATE); + + /* Write a known arbitrary value to test that the write is blocked */ + qtest_writel(s, test_register, TEST_LOCK_ARBITRARY_VALUE); + + /* We do not want to have the written value to be saved */ + assert_register_neq(s, test_register, TEST_LOCK_ARBITRARY_VALUE); + + /** + * Unlock the SCU and verify that it can be written to. + * Assumes that the first SCU protection register is sufficient to + * unlock all protection registers, if multiple are present. + */ + qtest_writel(s, protection_register, AST_SCU_PROT_UNLOCK_VALUE); + assert_register_eq(s, protection_register, AST_SCU_PROT_UNLOCK_STATE); + + /* Write a known arbitrary value to test that the write works */ + qtest_writel(s, test_register, TEST_LOCK_ARBITRARY_VALUE); + + /* Ensure that the written value is retained */ + assert_register_eq(s, test_register, TEST_LOCK_ARBITRARY_VALUE); + + qtest_quit(s); +} + +static void test_2500_write_permission_lock_state(void) +{ + test_write_permission_lock_state( + AST2500_MACHINE, + AST_SCU_BASE + AST2500_SCU_PROT_REG, + AST_SCU_BASE + AST2500_SCU_MISC_2_CONTROL_REG + ); +} + +static void test_2600_write_permission_lock_state(void) +{ + test_write_permission_lock_state( + AST2600_MACHINE, + AST_SCU_BASE + AST2600_SCU_PROT_REG, + AST_SCU_BASE + AST2600_SCU_MISC_2_CONTROL_REG + ); +} + +int main(int argc, char **argv) +{ + g_test_init(&argc, &argv, NULL); + + qtest_add_func("/ast2500/scu/protection_register", + test_2500_protection_register); + qtest_add_func("/ast2600/scu/protection_register", + test_2600_protection_register); + + qtest_add_func("/ast2500/scu/write_permission_lock_state", + test_2500_write_permission_lock_state); + qtest_add_func("/ast2600/scu/write_permission_lock_state", + test_2600_write_permission_lock_state); + + return g_test_run(); +} diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index 8ad849054f..91b4a71a18 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -215,6 +215,7 @@ qtests_npcm8xx = \ qtests_aspeed = \ ['aspeed_gpio-test', 'aspeed_hace-test', + 'aspeed_scu-test', 'aspeed_smc-test'] qtests_aspeed64 = \ ['ast2700-gpio-test', From 6888a4a9c8601005a2329fee6487c3c0df1348c0 Mon Sep 17 00:00:00 2001 From: Jamin Lin Date: Thu, 3 Jul 2025 13:24:00 +0800 Subject: [PATCH 07/11] aspeed: Deprecate the ast2700a0-evb machine MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The ast2700a0-evb machine represents the first revision of the AST2700 and serves as the initial engineering sample rather than a production version. A newer revision, A1, is now supported, and the ast2700a1-evb should replace the older A0 version. Signed-off-by: Jamin Lin Reviewed-by: Cédric Le Goater Link: https://lore.kernel.org/qemu-devel/20250703052400.2927831-1-jamin_lin@aspeedtech.com Signed-off-by: Cédric Le Goater --- docs/about/deprecated.rst | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst index 42037131de..5a3ed71a64 100644 --- a/docs/about/deprecated.rst +++ b/docs/about/deprecated.rst @@ -315,6 +315,14 @@ deprecated; use the new name ``dtb-randomness`` instead. The new name better reflects the way this property affects all random data within the device tree blob, not just the ``kaslr-seed`` node. +Arm ``ast2700a0-evb`` machine (since 10.1) +'''''''''''''''''''''''''''''''''''''''''' + +The ``ast2700a0-evb`` machine represents the first revision of the AST2700 +and serves as the initial engineering sample rather than a production version. +A newer revision, A1, is now supported, and the ``ast2700a1-evb`` should +replace the older A0 version. + Mips ``mipssim`` machine (since 10.0) ''''''''''''''''''''''''''''''''''''' From 92096685a00414a813aa4735db1706e4e5c6917d Mon Sep 17 00:00:00 2001 From: Ed Tanous Date: Thu, 3 Jul 2025 07:42:46 -0700 Subject: [PATCH 08/11] hw/arm/aspeed: Add second SPI chip to Aspeed model MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Aspeed2600 has two spi lanes; Add a new struct that can mount the second SPI. Signed-off-by: Ed Tanous Reviewed-by: Cédric Le Goater Link: https://lore.kernel.org/qemu-devel/20250703144249.3348879-2-etanous@nvidia.com Signed-off-by: Cédric Le Goater --- hw/arm/aspeed.c | 2 ++ include/hw/arm/aspeed.h | 2 ++ 2 files changed, 4 insertions(+) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index 94897505f8..8d7757e11f 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -465,6 +465,8 @@ static void aspeed_machine_init(MachineState *machine) aspeed_board_init_flashes(&bmc->soc->spi[0], bmc->spi_model ? bmc->spi_model : amc->spi_model, 1, amc->num_cs); + aspeed_board_init_flashes(&bmc->soc->spi[1], + amc->spi2_model, 1, amc->num_cs2); } if (machine->kernel_filename && sc->num_cpus > 1) { diff --git a/include/hw/arm/aspeed.h b/include/hw/arm/aspeed.h index 973277bea6..6c36455656 100644 --- a/include/hw/arm/aspeed.h +++ b/include/hw/arm/aspeed.h @@ -35,7 +35,9 @@ struct AspeedMachineClass { uint32_t hw_strap2; const char *fmc_model; const char *spi_model; + const char *spi2_model; uint32_t num_cs; + uint32_t num_cs2; uint32_t macs_mask; void (*i2c_init)(AspeedMachineState *bmc); uint32_t uart_default; From ad8e0e8a0088b8e30582c65b739a7ee8bb0d71ee Mon Sep 17 00:00:00 2001 From: Ed Tanous Date: Thu, 3 Jul 2025 07:42:47 -0700 Subject: [PATCH 09/11] docs: add support for gb200-bmc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch updates the docs for support of gb200-bmc. Signed-off-by: Ed Tanous Reviewed-by: Cédric Le Goater Link: https://lore.kernel.org/qemu-devel/20250703144249.3348879-3-etanous@nvidia.com Signed-off-by: Cédric Le Goater --- docs/system/arm/aspeed.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index 43d27d83cb..bec0a1dfa8 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -1,5 +1,4 @@ -Aspeed family boards (``ast2500-evb``, ``ast2600-evb``, ``ast2700-evb``, ``bletchley-bmc``, ``fuji-bmc``, ``fby35-bmc``, ``fp5280g2-bmc``, ``g220a-bmc``, ``palmetto-bmc``, ``qcom-dc-scm-v1-bmc``, ``qcom-firework-bmc``, ``quanta-q71l-bmc``, ``rainier-bmc``, ``romulus-bmc``, ``sonorapass-bmc``, ``supermicrox11-bmc``, ``supermicrox11spi-bmc``, ``tiogapass-bmc``, ``witherspoon-bmc``, ``yosemitev2-bmc``) -================================================================================================================================================================================================================================================================================================================================================================================================================================= +Aspeed family boards (``ast2500-evb``, ``ast2600-evb``, ``ast2700-evb``, ``bletchley-bmc``, ``fuji-bmc``, ``gb200nvl-bmc``, ``fby35-bmc``, ``fp5280g2-bmc``, ``g220a-bmc``, ``palmetto-bmc``, ``qcom-dc-scm-v1-bmc``, ``qcom-firework-bmc``, ``quanta-q71l-bmc``, ``rainier-bmc``, ``romulus-bmc``, ``sonorapass-bmc``, ``supermicrox11-bmc``, ``supermicrox11spi-bmc``, ``tiogapass-bmc``, ``witherspoon-bmc``, ``yosemitev2-bmc``) The QEMU Aspeed machines model BMCs of various OpenPOWER systems and Aspeed evaluation boards. They are based on different releases of the @@ -35,6 +34,7 @@ AST2600 SoC based machines : - ``fuji-bmc`` Facebook Fuji BMC - ``bletchley-bmc`` Facebook Bletchley BMC - ``fby35-bmc`` Facebook fby35 BMC +- ``gb200nvl-bmc`` Nvidia GB200nvl BMC - ``qcom-dc-scm-v1-bmc`` Qualcomm DC-SCM V1 BMC - ``qcom-firework-bmc`` Qualcomm Firework BMC From becfaa10a2b554ac619fdd9ae0aa9cacdba73d67 Mon Sep 17 00:00:00 2001 From: Ed Tanous Date: Thu, 3 Jul 2025 07:42:48 -0700 Subject: [PATCH 10/11] hw/arm/aspeed: Add GB200 BMC target MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit GB200nvl72 is a system for for accelerated compute. This is a model for the BMC target within the system. This is based on the device tree aspeed-bmc-nvidia-gb200nvl-bmc.dts from: [1] https://github.com/openbmc/linux/blob/dev-6.6/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts Signed-off-by: Ed Tanous Reviewed-by: Cédric Le Goater Link: https://lore.kernel.org/qemu-devel/20250703144249.3348879-4-etanous@nvidia.com Signed-off-by: Cédric Le Goater --- hw/arm/aspeed.c | 78 ++++++++++++++++++++++++++++++++++++++++++ hw/arm/aspeed_eeprom.c | 21 ++++++++++++ hw/arm/aspeed_eeprom.h | 3 ++ 3 files changed, 102 insertions(+) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index 8d7757e11f..c31bbe7701 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -201,6 +201,10 @@ struct AspeedMachineState { #define BLETCHLEY_BMC_HW_STRAP1 0x00002000 #define BLETCHLEY_BMC_HW_STRAP2 0x00000801 +/* GB200NVL hardware value */ +#define GB200NVL_BMC_HW_STRAP1 AST2600_EVB_HW_STRAP1 +#define GB200NVL_BMC_HW_STRAP2 AST2600_EVB_HW_STRAP2 + /* Qualcomm DC-SCM hardware value */ #define QCOM_DC_SCM_V1_BMC_HW_STRAP1 0x00000000 #define QCOM_DC_SCM_V1_BMC_HW_STRAP2 0x00000041 @@ -647,6 +651,12 @@ static void create_pca9552(AspeedSoCState *soc, int bus_id, int addr) TYPE_PCA9552, addr); } +static I2CSlave *create_pca9554(AspeedSoCState *soc, int bus_id, int addr) +{ + return i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, bus_id), + TYPE_PCA9554, addr); +} + static void sonorapass_bmc_i2c_init(AspeedMachineState *bmc) { AspeedSoCState *soc = bmc->soc; @@ -1226,6 +1236,45 @@ static void bletchley_bmc_i2c_init(AspeedMachineState *bmc) i2c_slave_create_simple(i2c[12], TYPE_PCA9552, 0x67); } + +static void gb200nvl_bmc_i2c_init(AspeedMachineState *bmc) +{ + AspeedSoCState *soc = bmc->soc; + I2CBus *i2c[15] = {}; + DeviceState *dev; + for (int i = 0; i < sizeof(i2c) / sizeof(i2c[0]); i++) { + if ((i == 11) || (i == 12) || (i == 13)) { + continue; + } + i2c[i] = aspeed_i2c_get_bus(&soc->i2c, i); + } + + /* Bus 5 Expander */ + create_pca9554(soc, 4, 0x21); + + /* Mux I2c Expanders */ + i2c_slave_create_simple(i2c[5], "pca9546", 0x71); + i2c_slave_create_simple(i2c[5], "pca9546", 0x72); + i2c_slave_create_simple(i2c[5], "pca9546", 0x73); + i2c_slave_create_simple(i2c[5], "pca9546", 0x75); + i2c_slave_create_simple(i2c[5], "pca9546", 0x76); + i2c_slave_create_simple(i2c[5], "pca9546", 0x77); + + /* Bus 10 */ + dev = DEVICE(create_pca9554(soc, 9, 0x20)); + + /* Set FPGA_READY */ + object_property_set_str(OBJECT(dev), "pin1", "high", &error_fatal); + + create_pca9554(soc, 9, 0x21); + at24c_eeprom_init(i2c[9], 0x50, 64 * KiB); + at24c_eeprom_init(i2c[9], 0x51, 64 * KiB); + + /* Bus 11 */ + at24c_eeprom_init_rom(i2c[10], 0x50, 256, gb200nvl_bmc_fruid, + gb200nvl_bmc_fruid_len); +} + static void fby35_i2c_init(AspeedMachineState *bmc) { AspeedSoCState *soc = bmc->soc; @@ -1782,6 +1831,31 @@ static void aspeed_machine_catalina_class_init(ObjectClass *oc, aspeed_machine_ast2600_class_emmc_init(oc); } +#define GB200NVL_BMC_RAM_SIZE ASPEED_RAM_SIZE(1 * GiB) + +static void aspeed_machine_gb200nvl_class_init(ObjectClass *oc, + const void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); + + mc->desc = "Nvidia GB200NVL BMC (Cortex-A7)"; + amc->soc_name = "ast2600-a3"; + amc->hw_strap1 = GB200NVL_BMC_HW_STRAP1; + amc->hw_strap2 = GB200NVL_BMC_HW_STRAP2; + amc->fmc_model = "mx66u51235f"; + amc->spi_model = "mx66u51235f"; + amc->num_cs = 2; + + amc->spi2_model = "mx66u51235f"; + amc->num_cs2 = 1; + amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON; + amc->i2c_init = gb200nvl_bmc_i2c_init; + mc->default_ram_size = GB200NVL_BMC_RAM_SIZE; + aspeed_machine_class_init_cpus_defaults(mc); + aspeed_machine_ast2600_class_emmc_init(oc); +} + static void fby35_reset(MachineState *state, ResetType type) { AspeedMachineState *bmc = ASPEED_MACHINE(state); @@ -2074,6 +2148,10 @@ static const TypeInfo aspeed_machine_types[] = { .name = MACHINE_TYPE_NAME("bletchley-bmc"), .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_machine_bletchley_class_init, + }, { + .name = MACHINE_TYPE_NAME("gb200nvl-bmc"), + .parent = TYPE_ASPEED_MACHINE, + .class_init = aspeed_machine_gb200nvl_class_init, }, { .name = MACHINE_TYPE_NAME("catalina-bmc"), .parent = TYPE_ASPEED_MACHINE, diff --git a/hw/arm/aspeed_eeprom.c b/hw/arm/aspeed_eeprom.c index daa3d329d1..8bbbdec834 100644 --- a/hw/arm/aspeed_eeprom.c +++ b/hw/arm/aspeed_eeprom.c @@ -162,6 +162,25 @@ const uint8_t rainier_bmc_fruid[] = { 0x31, 0x50, 0x46, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, }; +const uint8_t gb200nvl_bmc_fruid[] = { + 0x01, 0x00, 0x00, 0x01, 0x0b, 0x00, 0x00, 0xf3, 0x01, 0x0a, 0x19, 0x1f, + 0x0f, 0xe6, 0xc6, 0x4e, 0x56, 0x49, 0x44, 0x49, 0x41, 0xc5, 0x50, 0x33, + 0x38, 0x30, 0x39, 0xcd, 0x31, 0x35, 0x38, 0x33, 0x33, 0x32, 0x34, 0x38, + 0x30, 0x30, 0x31, 0x35, 0x30, 0xd2, 0x36, 0x39, 0x39, 0x2d, 0x31, 0x33, + 0x38, 0x30, 0x39, 0x2d, 0x30, 0x34, 0x30, 0x34, 0x2d, 0x36, 0x30, 0x30, + 0xc0, 0x01, 0x01, 0xd6, 0x4d, 0x41, 0x43, 0x3a, 0x20, 0x33, 0x43, 0x3a, + 0x36, 0x44, 0x3a, 0x36, 0x36, 0x3a, 0x31, 0x34, 0x3a, 0x43, 0x38, 0x3a, + 0x37, 0x41, 0xc1, 0x3b, 0x01, 0x09, 0x19, 0xc6, 0x4e, 0x56, 0x49, 0x44, + 0x49, 0x41, 0xc9, 0x50, 0x33, 0x38, 0x30, 0x39, 0x2d, 0x42, 0x4d, 0x43, + 0xd2, 0x36, 0x39, 0x39, 0x2d, 0x31, 0x33, 0x38, 0x30, 0x39, 0x2d, 0x30, + 0x34, 0x30, 0x34, 0x2d, 0x36, 0x30, 0x30, 0xc4, 0x41, 0x45, 0x2e, 0x31, + 0xcd, 0x31, 0x35, 0x38, 0x33, 0x33, 0x32, 0x34, 0x38, 0x30, 0x30, 0x31, + 0x35, 0x30, 0xc0, 0xc4, 0x76, 0x30, 0x2e, 0x31, 0xc1, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0xb4, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff + +}; + const size_t tiogapass_bmc_fruid_len = sizeof(tiogapass_bmc_fruid); const size_t fby35_nic_fruid_len = sizeof(fby35_nic_fruid); const size_t fby35_bb_fruid_len = sizeof(fby35_bb_fruid); @@ -169,3 +188,5 @@ const size_t fby35_bmc_fruid_len = sizeof(fby35_bmc_fruid); const size_t yosemitev2_bmc_fruid_len = sizeof(yosemitev2_bmc_fruid); const size_t rainier_bb_fruid_len = sizeof(rainier_bb_fruid); const size_t rainier_bmc_fruid_len = sizeof(rainier_bmc_fruid); +const size_t gb200nvl_bmc_fruid_len = sizeof(gb200nvl_bmc_fruid); + diff --git a/hw/arm/aspeed_eeprom.h b/hw/arm/aspeed_eeprom.h index f08c16ef50..3ed9bc1d9a 100644 --- a/hw/arm/aspeed_eeprom.h +++ b/hw/arm/aspeed_eeprom.h @@ -26,4 +26,7 @@ extern const size_t rainier_bb_fruid_len; extern const uint8_t rainier_bmc_fruid[]; extern const size_t rainier_bmc_fruid_len; +extern const uint8_t gb200nvl_bmc_fruid[]; +extern const size_t gb200nvl_bmc_fruid_len; + #endif From 3a34dad2c0d25cebafed40696bbbdeb7ff4b9c7d Mon Sep 17 00:00:00 2001 From: Ed Tanous Date: Thu, 3 Jul 2025 07:42:49 -0700 Subject: [PATCH 11/11] tests/functional: Add gb200 tests MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To support the newly added gb200 machine, add appropriate tests and extend do_test_arm_aspeed_openbmc() to support the hostname of this new system: "gb200nvl-obmc". Signed-off-by: Ed Tanous Reviewed-by: Cédric Le Goater Link: https://lore.kernel.org/qemu-devel/20250703144249.3348879-5-etanous@nvidia.com [ clg: Adjust commit log to document do_test_arm_aspeed_openbmc() change ] Signed-off-by: Cédric Le Goater --- tests/functional/aspeed.py | 9 +++++-- tests/functional/meson.build | 2 ++ .../test_arm_aspeed_gb200nvl_bmc.py | 26 +++++++++++++++++++ 3 files changed, 35 insertions(+), 2 deletions(-) create mode 100644 tests/functional/test_arm_aspeed_gb200nvl_bmc.py diff --git a/tests/functional/aspeed.py b/tests/functional/aspeed.py index 7a40d5dda7..b131703c52 100644 --- a/tests/functional/aspeed.py +++ b/tests/functional/aspeed.py @@ -8,8 +8,13 @@ from qemu_test import LinuxKernelTest class AspeedTest(LinuxKernelTest): def do_test_arm_aspeed_openbmc(self, machine, image, uboot='2019.04', - cpu_id='0x0', soc='AST2500 rev A1'): - hostname = machine.removesuffix('-bmc') + cpu_id='0x0', soc='AST2500 rev A1', + image_hostname=None): + # Allow for the image hostname to not end in "-bmc" + if image_hostname is not None: + hostname = image_hostname + else: + hostname = machine.removesuffix('-bmc') self.set_machine(machine) self.vm.set_console() diff --git a/tests/functional/meson.build b/tests/functional/meson.build index fb87b957aa..050c9000b9 100644 --- a/tests/functional/meson.build +++ b/tests/functional/meson.build @@ -33,6 +33,7 @@ test_timeouts = { 'arm_aspeed_ast2600' : 1200, 'arm_aspeed_bletchley' : 480, 'arm_aspeed_catalina' : 480, + 'arm_aspeed_gb200nvl_bmc' : 480, 'arm_aspeed_rainier' : 480, 'arm_bpim2u' : 500, 'arm_collie' : 180, @@ -129,6 +130,7 @@ tests_arm_system_thorough = [ 'arm_aspeed_ast2600', 'arm_aspeed_bletchley', 'arm_aspeed_catalina', + 'arm_aspeed_gb200nvl_bmc', 'arm_aspeed_rainier', 'arm_bpim2u', 'arm_canona1100', diff --git a/tests/functional/test_arm_aspeed_gb200nvl_bmc.py b/tests/functional/test_arm_aspeed_gb200nvl_bmc.py new file mode 100644 index 0000000000..8e8e3f05c1 --- /dev/null +++ b/tests/functional/test_arm_aspeed_gb200nvl_bmc.py @@ -0,0 +1,26 @@ +#!/usr/bin/env python3 +# +# Functional test that boots the ASPEED machines +# +# SPDX-License-Identifier: GPL-2.0-or-later + +from qemu_test import Asset +from aspeed import AspeedTest + + +class GB200Machine(AspeedTest): + + ASSET_GB200_FLASH = Asset( + 'https://github.com/legoater/qemu-aspeed-boot/raw/refs/heads/master/images/gb200nvl-obmc/obmc-phosphor-image-gb200nvl-obmc-20250702182348.static.mtd.xz', + 'b84819317cb3dc762895ad507705978ef000bfc77c50c33a63bdd37921db0dbc') + + def test_arm_aspeed_gb200_openbmc(self): + image_path = self.uncompress(self.ASSET_GB200_FLASH) + + self.do_test_arm_aspeed_openbmc('gb200nvl-bmc', image=image_path, + uboot='2019.04', cpu_id='0xf00', + soc='AST2600 rev A3', + image_hostname='gb200nvl-obmc') + +if __name__ == '__main__': + AspeedTest.main()