Third RISC-V PR for 8.1

* Use xl instead of mxl for disassemble
 * Factor out extension tests to cpu_cfg.h
 * disas/riscv: Add vendor extension support
 * disas/riscv: Add support for XVentanaCondOps
 * disas/riscv: Add support for XThead* instructions
 * Fix mstatus related problems
 * Fix veyron-v1 CPU properties
 * Fix the xlen for data address when MPRV=1
 * opensbi: Upgrade from v1.2 to v1.3
 * Enable 32-bit Spike OpenSBI boot testing
 * Support the watchdog timer of HiFive 1 rev b
 * Only build qemu-system-riscv$$ on rv$$ host
 * Add RVV registers to log
 * Restrict ACLINT to TCG
 * Add syscall riscv_hwprobe
 * Add support for BF16 extensions
 * KVM_RISCV_SET_TIMER macro is not configured correctly
 * Generate devicetree only after machine initialization is complete
 * virt: Convert fdt_load_addr to uint64_t
 * KVM: fixes and enhancements
 * Add support for the Zfa extension
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmSr+ekACgkQr3yVEwxT
 gBMMGg//ZCcyH3KXB49c2KUIFO6FKYUxN9uC3giZCtuGyEH8T2yDgZVVXnxwU+Ij
 +3Ej6T/ZdWMpePC9qf+xKzHWZk7Qc8Tcg+JgQbga573894yZInRwYl8HsSlEKA+Z
 vlqSBPxTlp9rlDwGP/LjGljyIFqL4konk9zi3FL4ZXTF1iHUGrh/953Y3wIreEfl
 KX5UznnWcgy2BqQT1vihMbM8qCVK6iryH+QZ6LiAsPMSX1rIzk8ectQryILzoIYh
 bMiwCLVMyr4ZrUXjmGTF+7/WcOWwhhyfpdstf2iotKALelZtVHit0wHcty2GYQde
 nvN83jJWu04DGXkPBUsqCUQXczGo1QHjJUH3RIRJzfOby/lGt4pSzHAfKA+iNUht
 ikM3SdBsXMO+ogjTtTcCMb7/m2vsMoQP60VRts9Mh3YVD0cgr7RqpqRoEMugVYnr
 ca8Vijf71mB+y+pq477eV1Q8BoKpr8xa1OlFkNKPC17uMD7HoDMI44QgFOgtYp10
 TMsqqyB75q6PZhSEwm63xbmH0Zpo8kSqT/E3MTtGTyPeuL8TNNNSkCmFaGYmRrbI
 XEp7vG2RaDJOvDomS3nUhA5ruc8SaXd0q25q2gLYQfCsehfFqZAwuNB5xf1zS0M0
 ov1/gwaqU93t6nLbo2cCbb0plkIFKwwJ9KKjD06wJ4KPe0TGFzk=
 =3XFD
 -----END PGP SIGNATURE-----

Merge tag 'pull-riscv-to-apply-20230710-1' of https://github.com/alistair23/qemu into staging

Third RISC-V PR for 8.1

* Use xl instead of mxl for disassemble
* Factor out extension tests to cpu_cfg.h
* disas/riscv: Add vendor extension support
* disas/riscv: Add support for XVentanaCondOps
* disas/riscv: Add support for XThead* instructions
* Fix mstatus related problems
* Fix veyron-v1 CPU properties
* Fix the xlen for data address when MPRV=1
* opensbi: Upgrade from v1.2 to v1.3
* Enable 32-bit Spike OpenSBI boot testing
* Support the watchdog timer of HiFive 1 rev b
* Only build qemu-system-riscv$$ on rv$$ host
* Add RVV registers to log
* Restrict ACLINT to TCG
* Add syscall riscv_hwprobe
* Add support for BF16 extensions
* KVM_RISCV_SET_TIMER macro is not configured correctly
* Generate devicetree only after machine initialization is complete
* virt: Convert fdt_load_addr to uint64_t
* KVM: fixes and enhancements
* Add support for the Zfa extension

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmSr+ekACgkQr3yVEwxT
# gBMMGg//ZCcyH3KXB49c2KUIFO6FKYUxN9uC3giZCtuGyEH8T2yDgZVVXnxwU+Ij
# +3Ej6T/ZdWMpePC9qf+xKzHWZk7Qc8Tcg+JgQbga573894yZInRwYl8HsSlEKA+Z
# vlqSBPxTlp9rlDwGP/LjGljyIFqL4konk9zi3FL4ZXTF1iHUGrh/953Y3wIreEfl
# KX5UznnWcgy2BqQT1vihMbM8qCVK6iryH+QZ6LiAsPMSX1rIzk8ectQryILzoIYh
# bMiwCLVMyr4ZrUXjmGTF+7/WcOWwhhyfpdstf2iotKALelZtVHit0wHcty2GYQde
# nvN83jJWu04DGXkPBUsqCUQXczGo1QHjJUH3RIRJzfOby/lGt4pSzHAfKA+iNUht
# ikM3SdBsXMO+ogjTtTcCMb7/m2vsMoQP60VRts9Mh3YVD0cgr7RqpqRoEMugVYnr
# ca8Vijf71mB+y+pq477eV1Q8BoKpr8xa1OlFkNKPC17uMD7HoDMI44QgFOgtYp10
# TMsqqyB75q6PZhSEwm63xbmH0Zpo8kSqT/E3MTtGTyPeuL8TNNNSkCmFaGYmRrbI
# XEp7vG2RaDJOvDomS3nUhA5ruc8SaXd0q25q2gLYQfCsehfFqZAwuNB5xf1zS0M0
# ov1/gwaqU93t6nLbo2cCbb0plkIFKwwJ9KKjD06wJ4KPe0TGFzk=
# =3XFD
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 10 Jul 2023 01:30:33 PM BST
# gpg:                using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65  9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20230710-1' of https://github.com/alistair23/qemu: (54 commits)
  riscv: Add support for the Zfa extension
  target/riscv/kvm.c: read/write (cbom|cboz)_blocksize in KVM
  target/riscv/kvm.c: add kvmconfig_get_cfg_addr() helper
  target/riscv: update multi-letter extension KVM properties
  target/riscv/cpu.c: create KVM mock properties
  target/riscv/cpu.c: remove priv_ver check from riscv_isa_string_ext()
  target/riscv/cpu.c: add satp_mode properties earlier
  target/riscv/kvm.c: add multi-letter extension KVM properties
  target/riscv/kvm.c: update KVM MISA bits
  target/riscv: add KVM specific MISA properties
  target/riscv/cpu: add misa_ext_info_arr[]
  target/riscv/kvm.c: init 'misa_ext_mask' with scratch CPU
  target/riscv: handle mvendorid/marchid/mimpid for KVM CPUs
  target/riscv: read marchid/mimpid in kvm_riscv_init_machine_ids()
  target/riscv: use KVM scratch CPUs to init KVM properties
  target/riscv/cpu.c: restrict 'marchid' value
  target/riscv/cpu.c: restrict 'mimpid' value
  target/riscv/cpu.c: restrict 'mvendorid' value
  hw/riscv/virt.c: skip 'mmu-type' FDT if satp mode not set
  target/riscv: skip features setup for KVM CPUs
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

include/hw/misc/sifive_e_aon.h

@@ -0,0 +1,60 @@
+/*
+ * SiFive HiFive1 AON (Always On Domain) interface.
+ *
+ * Copyright (c) 2022 SiFive, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef HW_SIFIVE_AON_H
+#define HW_SIFIVE_AON_H
+
+#include "hw/sysbus.h"
+#include "qom/object.h"
+
+#define TYPE_SIFIVE_E_AON "riscv.sifive.e.aon"
+OBJECT_DECLARE_SIMPLE_TYPE(SiFiveEAONState, SIFIVE_E_AON)
+
+#define SIFIVE_E_AON_WDOGKEY (0x51F15E)
+#define SIFIVE_E_AON_WDOGFEED (0xD09F00D)
+#define SIFIVE_E_LFCLK_DEFAULT_FREQ (32768)
+
+enum {
+    SIFIVE_E_AON_WDT    = 0x0,
+    SIFIVE_E_AON_RTC    = 0x40,
+    SIFIVE_E_AON_LFROSC = 0x70,
+    SIFIVE_E_AON_BACKUP = 0x80,
+    SIFIVE_E_AON_PMU    = 0x100,
+    SIFIVE_E_AON_MAX    = 0x150
+};
+
+struct SiFiveEAONState {
+    /*< private >*/
+    SysBusDevice parent_obj;
+
+    /*< public >*/
+    MemoryRegion mmio;
+
+    /*< watchdog timer >*/
+    QEMUTimer *wdog_timer;
+    qemu_irq wdog_irq;
+    uint64_t wdog_restart_time;
+    uint64_t wdogclk_freq;
+
+    uint32_t wdogcfg;
+    uint16_t wdogcmp0;
+    uint32_t wdogcount;
+    uint8_t wdogunlock;
+};
+
+#endif

include/hw/riscv/sifive_e.h

@@ -22,6 +22,7 @@
 #include "hw/riscv/riscv_hart.h"
 #include "hw/riscv/sifive_cpu.h"
 #include "hw/gpio/sifive_gpio.h"
+#include "hw/misc/sifive_e_aon.h"
 #include "hw/boards.h"
 
 #define TYPE_RISCV_E_SOC "riscv.sifive.e.soc"
@@ -35,6 +36,7 @@ typedef struct SiFiveESoCState {
     /*< public >*/
     RISCVHartArrayState cpus;
     DeviceState *plic;
+    SiFiveEAONState aon;
     SIFIVEGPIOState gpio;
     MemoryRegion xip_mem;
     MemoryRegion mask_rom;
@@ -76,9 +78,10 @@ enum {
 };
 
 enum {
-    SIFIVE_E_UART0_IRQ  = 3,
-    SIFIVE_E_UART1_IRQ  = 4,
-    SIFIVE_E_GPIO0_IRQ0 = 8
+    SIFIVE_E_AON_WDT_IRQ  = 1,
+    SIFIVE_E_UART0_IRQ    = 3,
+    SIFIVE_E_UART1_IRQ    = 4,
+    SIFIVE_E_GPIO0_IRQ0   = 8
 };
 
 #define SIFIVE_E_PLIC_HART_CONFIG "M"