hw: move headers to include/

Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

include/hw/virtio/virtio-serial.h

@@ -0,0 +1,247 @@
+/*
+ * Virtio Serial / Console Support
+ *
+ * Copyright IBM, Corp. 2008
+ * Copyright Red Hat, Inc. 2009, 2010
+ *
+ * Authors:
+ *  Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
+ *  Amit Shah <amit.shah@redhat.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.  See
+ * the COPYING file in the top-level directory.
+ *
+ */
+#ifndef _QEMU_VIRTIO_SERIAL_H
+#define _QEMU_VIRTIO_SERIAL_H
+
+#include "hw/qdev.h"
+#include "hw/virtio/virtio.h"
+
+/* == Interface shared between the guest kernel and qemu == */
+
+/* The Virtio ID for virtio console / serial ports */
+#define VIRTIO_ID_CONSOLE		3
+
+/* Features supported */
+#define VIRTIO_CONSOLE_F_MULTIPORT	1
+
+#define VIRTIO_CONSOLE_BAD_ID           (~(uint32_t)0)
+
+struct virtio_console_config {
+    /*
+     * These two fields are used by VIRTIO_CONSOLE_F_SIZE which
+     * isn't implemented here yet
+     */
+    uint16_t cols;
+    uint16_t rows;
+
+    uint32_t max_nr_ports;
+} QEMU_PACKED;
+
+struct virtio_console_control {
+    uint32_t id;		/* Port number */
+    uint16_t event;		/* The kind of control event (see below) */
+    uint16_t value;		/* Extra information for the key */
+};
+
+struct virtio_serial_conf {
+    /* Max. number of ports we can have for a virtio-serial device */
+    uint32_t max_virtserial_ports;
+};
+
+/* Some events for the internal messages (control packets) */
+#define VIRTIO_CONSOLE_DEVICE_READY	0
+#define VIRTIO_CONSOLE_PORT_ADD		1
+#define VIRTIO_CONSOLE_PORT_REMOVE	2
+#define VIRTIO_CONSOLE_PORT_READY	3
+#define VIRTIO_CONSOLE_CONSOLE_PORT	4
+#define VIRTIO_CONSOLE_RESIZE		5
+#define VIRTIO_CONSOLE_PORT_OPEN	6
+#define VIRTIO_CONSOLE_PORT_NAME	7
+
+/* == In-qemu interface == */
+
+#define TYPE_VIRTIO_SERIAL_PORT "virtio-serial-port"
+#define VIRTIO_SERIAL_PORT(obj) \
+     OBJECT_CHECK(VirtIOSerialPort, (obj), TYPE_VIRTIO_SERIAL_PORT)
+#define VIRTIO_SERIAL_PORT_CLASS(klass) \
+     OBJECT_CLASS_CHECK(VirtIOSerialPortClass, (klass), TYPE_VIRTIO_SERIAL_PORT)
+#define VIRTIO_SERIAL_PORT_GET_CLASS(obj) \
+     OBJECT_GET_CLASS(VirtIOSerialPortClass, (obj), TYPE_VIRTIO_SERIAL_PORT)
+
+typedef struct VirtIOSerial VirtIOSerial;
+typedef struct VirtIOSerialBus VirtIOSerialBus;
+typedef struct VirtIOSerialPort VirtIOSerialPort;
+
+typedef struct VirtIOSerialPortClass {
+    DeviceClass parent_class;
+
+    /* Is this a device that binds with hvc in the guest? */
+    bool is_console;
+
+    /*
+     * The per-port (or per-app) init function that's called when a
+     * new device is found on the bus.
+     */
+    int (*init)(VirtIOSerialPort *port);
+    /*
+     * Per-port exit function that's called when a port gets
+     * hot-unplugged or removed.
+     */
+    int (*exit)(VirtIOSerialPort *port);
+
+    /* Callbacks for guest events */
+        /* Guest opened/closed device. */
+    void (*set_guest_connected)(VirtIOSerialPort *port, int guest_connected);
+
+        /* Guest is now ready to accept data (virtqueues set up). */
+    void (*guest_ready)(VirtIOSerialPort *port);
+
+    /*
+     * Guest wrote some data to the port. This data is handed over to
+     * the app via this callback.  The app can return a size less than
+     * 'len'.  In this case, throttling will be enabled for this port.
+     */
+    ssize_t (*have_data)(VirtIOSerialPort *port, const uint8_t *buf,
+                         size_t len);
+} VirtIOSerialPortClass;
+
+/*
+ * This is the state that's shared between all the ports.  Some of the
+ * state is configurable via command-line options. Some of it can be
+ * set by individual devices in their initfn routines. Some of the
+ * state is set by the generic qdev device init routine.
+ */
+struct VirtIOSerialPort {
+    DeviceState dev;
+
+    QTAILQ_ENTRY(VirtIOSerialPort) next;
+
+    /*
+     * This field gives us the virtio device as well as the qdev bus
+     * that we are associated with
+     */
+    VirtIOSerial *vser;
+
+    VirtQueue *ivq, *ovq;
+
+    /*
+     * This name is sent to the guest and exported via sysfs.
+     * The guest could create symlinks based on this information.
+     * The name is in the reverse fqdn format, like org.qemu.console.0
+     */
+    char *name;
+
+    /*
+     * This id helps identify ports between the guest and the host.
+     * The guest sends a "header" with this id with each data packet
+     * that it sends and the host can then find out which associated
+     * device to send out this data to
+     */
+    uint32_t id;
+
+    /*
+     * This is the elem that we pop from the virtqueue.  A slow
+     * backend that consumes guest data (e.g. the file backend for
+     * qemu chardevs) can cause the guest to block till all the output
+     * is flushed.  This isn't desired, so we keep a note of the last
+     * element popped and continue consuming it once the backend
+     * becomes writable again.
+     */
+    VirtQueueElement elem;
+
+    /*
+     * The index and the offset into the iov buffer that was popped in
+     * elem above.
+     */
+    uint32_t iov_idx;
+    uint64_t iov_offset;
+
+    /*
+     * When unthrottling we use a bottom-half to call flush_queued_data.
+     */
+    QEMUBH *bh;
+
+    /* Is the corresponding guest device open? */
+    bool guest_connected;
+    /* Is this device open for IO on the host? */
+    bool host_connected;
+    /* Do apps not want to receive data? */
+    bool throttled;
+};
+
+/* The virtio-serial bus on top of which the ports will ride as devices */
+struct VirtIOSerialBus {
+    BusState qbus;
+
+    /* This is the parent device that provides the bus for ports. */
+    VirtIOSerial *vser;
+
+    /* The maximum number of ports that can ride on top of this bus */
+    uint32_t max_nr_ports;
+};
+
+typedef struct VirtIOSerialPostLoad {
+    QEMUTimer *timer;
+    uint32_t nr_active_ports;
+    struct {
+        VirtIOSerialPort *port;
+        uint8_t host_connected;
+    } *connected;
+} VirtIOSerialPostLoad;
+
+struct VirtIOSerial {
+    VirtIODevice vdev;
+
+    VirtQueue *c_ivq, *c_ovq;
+    /* Arrays of ivqs and ovqs: one per port */
+    VirtQueue **ivqs, **ovqs;
+
+    VirtIOSerialBus bus;
+
+    DeviceState *qdev;
+
+    QTAILQ_HEAD(, VirtIOSerialPort) ports;
+
+    /* bitmap for identifying active ports */
+    uint32_t *ports_map;
+
+    struct virtio_console_config config;
+
+    struct VirtIOSerialPostLoad *post_load;
+};
+
+/* Interface to the virtio-serial bus */
+
+/*
+ * Open a connection to the port
+ *   Returns 0 on success (always).
+ */
+int virtio_serial_open(VirtIOSerialPort *port);
+
+/*
+ * Close the connection to the port
+ *   Returns 0 on success (always).
+ */
+int virtio_serial_close(VirtIOSerialPort *port);
+
+/*
+ * Send data to Guest
+ */
+ssize_t virtio_serial_write(VirtIOSerialPort *port, const uint8_t *buf,
+                            size_t size);
+
+/*
+ * Query whether a guest is ready to receive data.
+ */
+size_t virtio_serial_guest_ready(VirtIOSerialPort *port);
+
+/*
+ * Flow control: Ports can signal to the virtio-serial core to stop
+ * sending data or re-start sending data, depending on the 'throttle'
+ * value here.
+ */
+void virtio_serial_throttle_port(VirtIOSerialPort *port, bool throttle);
+
+#endif