softfloat: Inline pickNaN

Inline pickNaN into its only caller.  This makes one assert
redundant with the immediately preceding IF.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241203203949.483774-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

fpu/softfloat-parts.c.inc

@@ -39,25 +39,89 @@ static void partsN(return_nan)(FloatPartsN *a, float_status *s)
 static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b,
                                      float_status *s)
 {
+    int cmp, which;
+
     if (is_snan(a->cls) || is_snan(b->cls)) {
         float_raise(float_flag_invalid | float_flag_invalid_snan, s);
     }
 
     if (s->default_nan_mode) {
         parts_default_nan(a, s);
-    } else {
+        return a;
-        int cmp = frac_cmp(a, b);
+    }
+
+    cmp = frac_cmp(a, b);
     if (cmp == 0) {
         cmp = a->sign < b->sign;
     }
 
-        if (pickNaN(a->cls, b->cls, cmp > 0, s)) {
+    switch (s->float_2nan_prop_rule) {
+    case float_2nan_prop_s_ab:
+        if (is_snan(a->cls)) {
+            which = 0;
+        } else if (is_snan(b->cls)) {
+            which = 1;
+        } else if (is_qnan(a->cls)) {
+            which = 0;
+        } else {
+            which = 1;
+        }
+        break;
+    case float_2nan_prop_s_ba:
+        if (is_snan(b->cls)) {
+            which = 1;
+        } else if (is_snan(a->cls)) {
+            which = 0;
+        } else if (is_qnan(b->cls)) {
+            which = 1;
+        } else {
+            which = 0;
+        }
+        break;
+    case float_2nan_prop_ab:
+        which = is_nan(a->cls) ? 0 : 1;
+        break;
+    case float_2nan_prop_ba:
+        which = is_nan(b->cls) ? 1 : 0;
+        break;
+    case float_2nan_prop_x87:
+        /*
+         * This implements x87 NaN propagation rules:
+         * SNaN + QNaN => return the QNaN
+         * two SNaNs => return the one with the larger significand, silenced
+         * two QNaNs => return the one with the larger significand
+         * SNaN and a non-NaN => return the SNaN, silenced
+         * QNaN and a non-NaN => return the QNaN
+         *
+         * If we get down to comparing significands and they are the same,
+         * return the NaN with the positive sign bit (if any).
+         */
+        if (is_snan(a->cls)) {
+            if (is_snan(b->cls)) {
+                which = cmp > 0 ? 0 : 1;
+            } else {
+                which = is_qnan(b->cls) ? 1 : 0;
+            }
+        } else if (is_qnan(a->cls)) {
+            if (is_snan(b->cls) || !is_qnan(b->cls)) {
+                which = 0;
+            } else {
+                which = cmp > 0 ? 0 : 1;
+            }
+        } else {
+            which = 1;
+        }
+        break;
+    default:
+        g_assert_not_reached();
+    }
+
+    if (which) {
         a = b;
     }
     if (is_snan(a->cls)) {
         parts_silence_nan(a, s);
     }
-    }
     return a;
 }
 

fpu/softfloat-specialize.c.inc

@@ -352,102 +352,6 @@ bool float32_is_signaling_nan(float32 a_, float_status *status)
     }
 }
 
-/*----------------------------------------------------------------------------
-| Select which NaN to propagate for a two-input operation.
-| IEEE754 doesn't specify all the details of this, so the
-| algorithm is target-specific.
-| The routine is passed various bits of information about the
-| two NaNs and should return 0 to select NaN a and 1 for NaN b.
-| Note that signalling NaNs are always squashed to quiet NaNs
-| by the caller, by calling floatXX_silence_nan() before
-| returning them.
-|
-| aIsLargerSignificand is only valid if both a and b are NaNs
-| of some kind, and is true if a has the larger significand,
-| or if both a and b have the same significand but a is
-| positive but b is negative. It is only needed for the x87
-| tie-break rule.
-*----------------------------------------------------------------------------*/
-
-static int pickNaN(FloatClass a_cls, FloatClass b_cls,
-                   bool aIsLargerSignificand, float_status *status)
-{
-    /*
-     * We guarantee not to require the target to tell us how to
-     * pick a NaN if we're always returning the default NaN.
-     * But if we're not in default-NaN mode then the target must
-     * specify via set_float_2nan_prop_rule().
-     */
-    assert(!status->default_nan_mode);
-
-    switch (status->float_2nan_prop_rule) {
-    case float_2nan_prop_s_ab:
-        if (is_snan(a_cls)) {
-            return 0;
-        } else if (is_snan(b_cls)) {
-            return 1;
-        } else if (is_qnan(a_cls)) {
-            return 0;
-        } else {
-            return 1;
-        }
-        break;
-    case float_2nan_prop_s_ba:
-        if (is_snan(b_cls)) {
-            return 1;
-        } else if (is_snan(a_cls)) {
-            return 0;
-        } else if (is_qnan(b_cls)) {
-            return 1;
-        } else {
-            return 0;
-        }
-        break;
-    case float_2nan_prop_ab:
-        if (is_nan(a_cls)) {
-            return 0;
-        } else {
-            return 1;
-        }
-        break;
-    case float_2nan_prop_ba:
-        if (is_nan(b_cls)) {
-            return 1;
-        } else {
-            return 0;
-        }
-        break;
-    case float_2nan_prop_x87:
-        /*
-         * This implements x87 NaN propagation rules:
-         * SNaN + QNaN => return the QNaN
-         * two SNaNs => return the one with the larger significand, silenced
-         * two QNaNs => return the one with the larger significand
-         * SNaN and a non-NaN => return the SNaN, silenced
-         * QNaN and a non-NaN => return the QNaN
-         *
-         * If we get down to comparing significands and they are the same,
-         * return the NaN with the positive sign bit (if any).
-         */
-        if (is_snan(a_cls)) {
-            if (is_snan(b_cls)) {
-                return aIsLargerSignificand ? 0 : 1;
-            }
-            return is_qnan(b_cls) ? 1 : 0;
-        } else if (is_qnan(a_cls)) {
-            if (is_snan(b_cls) || !is_qnan(b_cls)) {
-                return 0;
-            } else {
-                return aIsLargerSignificand ? 0 : 1;
-            }
-        } else {
-            return 1;
-        }
-    default:
-        g_assert_not_reached();
-    }
-}
-
 /*----------------------------------------------------------------------------
 | Returns 1 if the double-precision floating-point value `a' is a quiet
 | NaN; otherwise returns 0.