3D-printing/klipper
1
0
Fork 0
mirror of https://github.com/Klipper3d/klipper.git synced 2025-12-26 09:38:33 -07:00
Code Issues Projects Releases Packages Wiki Activity Actions 2
klipper/lib/cmsis-stm32f1/include
History
Grigori Goronzy 75d5737211 Add STM32F103 port 
Add a fully functional STM32F1 port, currently mostly targeting STM32F103
microcontrollers. This requires an 8 MHz XTAL. The maximum possible step rate
is around 282K steps per second.

This uses stm32flash to burn the firmware. The bootloader needs to be started
by setting BOOT0 to 1 and resetting the MCU. There is no automatic bootloader,
unlike on Arduino.

Signed-off-by: Grigori Goronzy <greg@kinoho.net>
2018-04-09 18:08:29 -04:00
..
stm32f1xx.h Add STM32F103 port 2018-04-09 18:08:29 -04:00
stm32f100xb.h Add STM32F103 port 2018-04-09 18:08:29 -04:00
stm32f100xe.h Add STM32F103 port 2018-04-09 18:08:29 -04:00
stm32f101x6.h Add STM32F103 port 2018-04-09 18:08:29 -04:00
stm32f101xb.h Add STM32F103 port 2018-04-09 18:08:29 -04:00
stm32f101xe.h Add STM32F103 port 2018-04-09 18:08:29 -04:00
stm32f101xg.h Add STM32F103 port 2018-04-09 18:08:29 -04:00
stm32f102x6.h Add STM32F103 port 2018-04-09 18:08:29 -04:00
stm32f102xb.h Add STM32F103 port 2018-04-09 18:08:29 -04:00
stm32f103x6.h Add STM32F103 port 2018-04-09 18:08:29 -04:00
stm32f103xb.h Add STM32F103 port 2018-04-09 18:08:29 -04:00
stm32f103xe.h Add STM32F103 port 2018-04-09 18:08:29 -04:00
stm32f103xg.h Add STM32F103 port 2018-04-09 18:08:29 -04:00
stm32f105xc.h Add STM32F103 port 2018-04-09 18:08:29 -04:00
stm32f107xc.h Add STM32F103 port 2018-04-09 18:08:29 -04:00
system_stm32f1xx.h Add STM32F103 port 2018-04-09 18:08:29 -04:00