Josh Sutinen db927bd822 config: Added Wanhao Duplicator i3 Plus configuration ... The Wanhao Duplicator i3 Plus (aka Maker Select Plus, Microcenter Powerspec Plus, and others) uses an atmega2560 AVR. The config is based on generic-ramps.cfg with pin numbers updated from the official Wanhao Marlin sources at https://github.com/garychen99/Duplicator-i3-plus Signed-off-by: Josh Sutinen <josh@damagedgoodz.net> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>		2018-01-04 12:10:01 -05:00
..
avrsim.cfg	heater: Rename thermistor_type config name to sensor_type	2017-03-13 00:46:33 -04:00
example-corexy.cfg	stepper: Use a sane default for homing_positive_dir	2017-07-24 14:31:46 -04:00
example-delta.cfg	delta: Default stepper_b/c position_endstop to stepper_a's	2017-12-08 18:20:04 -05:00
example-extras.cfg	chipmisc: Add multi_pin capability	2017-12-18 21:00:06 -05:00
example.cfg	heater: Added config for heater PWM cycle time.	2018-01-03 12:32:11 -05:00
generic-cramps.cfg	config: Warn Beaglebone PRU users that pinmux settings are not updated	2017-10-25 11:01:36 -04:00
generic-melzi.cfg	docs: Provide additional information on "make flash" failures	2017-12-11 17:33:29 -05:00
generic-printrboard.cfg	config: Add a generic-printrboard.cfg file	2017-10-30 10:56:08 -04:00
generic-rambo.cfg	config: List E1 micro-step pins in order in generic-rambo.cfg	2017-11-08 11:14:37 -05:00
generic-ramps.cfg	stepper: Use a sane default for homing_positive_dir	2017-07-24 14:31:46 -04:00
generic-replicape.cfg	config: Warn Beaglebone PRU users that pinmux settings are not updated	2017-10-25 11:01:36 -04:00
lulzbot-taz6-2017.cfg	config: Update TAZ6 defaults for hotend	2018-01-04 10:58:47 -05:00
makergear-m2-2012.cfg	chipmisc: Add support for configuring ad5206 digipots	2017-08-26 18:27:21 -04:00
wanhao-duplicator-i3-plus-2017.cfg	config: Added Wanhao Duplicator i3 Plus configuration	2018-01-04 12:10:01 -05:00