tilsonm f183871e28 config: Adopt Anet A8 cfg, Anet v1.0-1.5 Boards ... This configuration file should work as a base for Anet A8 printers using the stock Anet v1.0-1.5 boards from late 2016-2017, which are based around the AVR atmega1284p. Minor tweaks may be required to such things as /dev/serial/by-id/, thermistor sensor types, and offsets for carriage and bed. Signed-off-by: Matt Tilson <tilsonm09@gmail.com>		2018-01-07 22:22:08 -05:00
..
anet-a8-2017.cfg	config: Adopt Anet A8 cfg, Anet v1.0-1.5 Boards	2018-01-07 22:22:08 -05:00
avrsim.cfg	heater: Rename thermistor_type config name to sensor_type	2017-03-13 00:46:33 -04:00
example-corexy.cfg	stepper: Use a sane default for homing_positive_dir	2017-07-24 14:31:46 -04:00
example-delta.cfg	delta: Default stepper_b/c position_endstop to stepper_a's	2017-12-08 18:20:04 -05:00
example-extras.cfg	chipmisc: Add multi_pin capability	2017-12-18 21:00:06 -05:00
example.cfg	heater: Added config for heater PWM cycle time.	2018-01-03 12:32:11 -05:00
generic-cramps.cfg	config: Warn Beaglebone PRU users that pinmux settings are not updated	2017-10-25 11:01:36 -04:00
generic-melzi.cfg	config: Note the need to flash a bootloader on the Melzi	2018-01-05 10:23:58 -05:00
generic-printrboard.cfg	config: Add a generic-printrboard.cfg file	2017-10-30 10:56:08 -04:00
generic-rambo.cfg	config: List E1 micro-step pins in order in generic-rambo.cfg	2017-11-08 11:14:37 -05:00
generic-ramps.cfg	stepper: Use a sane default for homing_positive_dir	2017-07-24 14:31:46 -04:00
generic-replicape.cfg	config: Warn Beaglebone PRU users that pinmux settings are not updated	2017-10-25 11:01:36 -04:00
lulzbot-taz6-2017.cfg	config: Update TAZ6 defaults for hotend	2018-01-04 10:58:47 -05:00
makergear-m2-2012.cfg	chipmisc: Add support for configuring ad5206 digipots	2017-08-26 18:27:21 -04:00
wanhao-duplicator-i3-plus-2017.cfg	config: Added Wanhao Duplicator i3 Plus configuration	2018-01-04 12:10:01 -05:00