The docs aren't particularly clear that if you generate a mesh in our start g-code, you can just use it without additional commands. This is causing issues with support on r/klippers
Signed-off-by: Rowland Straylight <rowlandstraylight@gmail.com>
Add a new G-Code command that can register a manual_stepper as an
additional axis on standard G-Code G1 commands.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* tests: Added a regression test for generic_cartesian kinematics
* kinematics: An intial implementation of generic_cartesian kinematics
* generic_cartesian: Refactored kinematics configuration API
* generic_cartesian: Use stepper instead of kinematic_stepper in configs
* generic_cartesian: Added SET_STEPPER_KINEMATICS command
* generic_cartesian: Fixed parsing of section names
* docs: Generic Caretsian kinematics documentation and config samples
* generic_cartesian: Implemented multi-mcu homing validation
* generic_cartesian: Fixed typos in docs, minor fixes
* generic_cartesian: Renamed `kinematics` option to `carriages`
* generic_cartesian: Moved kinematic_stepper.py file
* idex_modes: Internal refactoring of handling dual carriages
* stepper: Refactored the code to not store a reference to config object
* config: Updated example-generic-cartesian config
* generic_cartesian: Restricted SET_STEPPER_CARRIAGES and exported status
* idex_modes: Fixed handling stepper kinematics with input shaper enabled
* config: Updated configs and tests for SET_DUAL_CARRIAGE new params
* generic_cartesian: Avoid inheritance in the added classes
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
Commit 70838797 added support for clearing the homing state in
SET_KINEMATIC_POSITION commands. However, it can be difficult to use
that support as the default for SET_KINEMATIC_POSITION is to set all
axes as homed.
Add a new SET_HOMED parameter to allow one to explicitly request which
axes to consider in a homed state.
Also introduce a CLEAR_HOMED parameter and prefer that to the existing
CLEAR parameter.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* Add gram scale features to load_cell
* Convert sensor counts to grams and make this available via unix socket and object status
* Basic GCodes for tearing and reading the load cell
* Guided Calibration
* Diagnostic gcode to check the health of the load cell
* Update load_cell Documentation
* Add API server load_cell/dump_force endpoint
* Update [load_cell] config with calibration fields
* Add G-Code commands for working with load cells
* Add status reference for load_cell objects
Signed-off-by: Gareth Farrington <gareth@waves.ky>
`CLEAR` clears the homing status (resets the axis limits) without turning off
the motors. This is particularly useful when implementing safe Z homing in
`[homing_override]` on printers with multiple independent Z steppers (where
`FORCE_MOVE` can't be used).
Signed-off-by: Dennis Marttinen <twelho@welho.tech>
This commit adds automatic calculation support for compensating X and Y axis twist in the axis_twist_compensation module.
Signed-off-by: Jorge Apaza Merma <yochiwarez@gmail.com>
This commit implements support for the Y-axis in the axis_twist_compensation
module. This update enables the module to handle corrections for printers
with a twisted Y rail.
Signed-off-by: Jorge Apaza Merma <yochiwarez@gmail.com>
Corrected issue where accelerometer names were incorrectly prefixed
with "adxl345", preventing the selection of other chip types when running TEST_RESONANCES.
Implemented support for selecting the `accel_per_hz` parameter when running TEST_RESONANCES.
docs: Update TEST_RESONANCES + SHAPER_CALIBRATE with missing parameters and bracket corrections
Signed-off-by: Maksim Bolgov <maksim8024@gmail.com>
The user facing max_accel_to_decel setting is complicated and
confusing. Replace it with a new minimum_cruise_ratio parameter.
Internally this user-facing parameter will calculate the existing
low-level "accel_to_decel" mechanism.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Remove the deprecated SET_EXTRUDER_STEP_DISTANCE and
SYNC_STEPPER_TO_EXTRUDER commands. Remove the deprecated
shared_heater config option.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Remove support for changing the cycle time of pwm pins from the
output_pin module. Use a new pwm_cycle_time module that supports
setting dynamic cycle times. This simplifies the output_pin code and
low-level pin update code.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Note that the max_accel parameter is the actual acceleration used in
most movements.
Note that the accel/velocity limits can be changed using the
SET_VELOCITY_LIMIT command.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
The output_pin module is only capable of updating an output pin at
most once every 100ms. Add a new pwm_tool module that is capable of
queuing updates in the micro-controller and thus allowing for much
higher update rates.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Implements AxisTwistCompensation, and Calibrater
Supports calibration of z-offsets caused by x gantry twist
Modify PrinterProbe._probe function to check if the probed z value should be adjusted
based on axis_twist_compensation's configuration
Add documentation for [axis_twist_compensation] module
Signed-off-by: Jeremy Tan <jeremytkw98@gmail.com>
COPY and MIRROR mode implementation
Correctly apply input shaper params to new dual_carriage
Added SAVE_/RESTORE_IDEX_STATE commands
Documentation updates for the new IDEX modes
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
Add an optional REGISTER parameter to DUMP_TMC so that the output is more filtered/cleaner for manual TMC calibration.
Signed-off-by: Alex Voinea <voinea.dragos.alexandru@gmail.com>
Ability to specify `VELOCITY` as a parameter for SET_TMC_FIELD. Useful for configuring at runtime the TSTEP based fields of the driver.
Signed-off-by: Alex Voinea <voinea.dragos.alexandru@gmail.com>
Previously, the globalscaler was calculated during the config parsing and set to a fixed value. If the current was changed for any reason after the initialization, only IRUN and IHOLD would be changed. This however caused issues:
- If the new current was lower, then the resolution of the possible current values would be low since there are only 32 IRUN/IHOLD steps.
- If the new current was higher, it wouldn't actually work since IRUN and IHOLD are capped at 31, so it wouldn't be possible to increase the current without increasing globalscaler.
With this commit, the globalscaler is recalculated whenever necessary in order to ensure the correct range of IRUN/IHOLD is used.
Signed-off-by: Alex Voinea <voinea.dragos.alexandru@gmail.com>
add G17, G18 and G19 commands to select arc planes
enhance G2/G3 to support arc moves in XY, XZ and YZ planes
Signed-off-by: Andrew Mirsky <andrew@mirsky.net>
This adds a gcode command that can be used insight the slicer to pass the total layer count and current layer information.
Signed-off-by: Stefan Dej <meteyou@gmail.com>
Added a SET_DIGIPOT command to the mcp4018 implementation.
Previously the mcp4018 was read only, and set at the time of
configuration. This allows you to change the value during a
print, which is needed for some older printers that need to
lower the stepper current during preheating.
Signed-off-by: Jake Bordens <jake@allaboutjake.com>
Add PROBE and CHIP to TEST_RESONANCES
Since it's possible to specify more than one chip
in TEST_RESONANCES the CHIP parameter has been
renamed to CHIPS
Signed-off-by: Mikkel Schmidt <mikkel.schmidt@gmail.com>
