3D-printing/klipper
1
0
Fork 0
mirror of https://github.com/Klipper3d/klipper.git synced 2025-12-31 20:00:27 -07:00
Code Issues Projects Releases Packages Wiki Activity Actions 6

Update generic-mellow-fly-d5.cfg

Browse source
This commit is contained in:
EagleJinWt 2025-02-26 09:48:48 +01:00 • committed by GitHub
parent 63ea71d928
commit fded0a4e3f
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
1 changed files with 30 additions and 4 deletions
Download patch file Download diff file Expand all files Collapse all files

34
config/generic-mellow-fly-d5.cfg
View file

@ -3,6 +3,7 @@
#Pruduct page on https://mellow.klipper.cn/en/docs/category/fly-d5
#STM32F072, 8KiB bootloader, 8 Mhz crystal, USB or USB to CAN adapter(depends on if you are using a canbus toolhead board)
#See more about firmwares on https://mellow.klipper.cn/en/docs/ProductDoc/MainBoard/fly-d/fly-d5/flash/
#This document is mainly used for pin references, change other parameters before actual use.
[mcu]
serial:/put/your/serial/here # See https://www.klipper3d.org/FAQ.html#wheres-my-serial-port for more
@ -21,10 +22,19 @@ step_pin: PC5
dir_pin: !PC4
enable_pin: !PB0
microsteps: 64
rotation_distance: 23.310912 #Only for BMG gears, replace it with your own extruder parameters. See https://www.klipper3d.org/Rotation_Distance.html
gear_ratio: 50:10 #Same as above
nozzle_diameter: 0.4
filament_diameter: 1.75
rotation_distance: 23.310912
gear_ratio: 50:10
heater_pin: PC6
sensor_pin: PC1
sensor_type: Generic 3950
control: pid
pid_Kp: 10
pid_Ki: 10
pid_Kd: 10
min_temp: 0
max_temp: 300
#[tmc2209 extruder] #Decomment this section if using a TMC2209 stepper driver, replace it with your TMC model. Applies to the other [tmc2209] section.
#uart_pin: PA7
@ -39,6 +49,8 @@ enable_pin: !PC2
microsteps: 64
rotation_distance: 40 #See https://www.klipper3d.org/Rotation_Distance.html
endstop_pin:^PB4
position_endstop: 0
position_max: 200
#[tmc2209 stepper_x]
#uart_pin: PC13
@ -53,6 +65,8 @@ enable_pin: !PA2
microsteps: 64
rotation_distance: 40 #Same as above
endstop_pin: ^PB3
position_endstop: 0
position_max: 200
#[tmc2209 stepper_y]
#uart_pin: PC3
@ -67,6 +81,8 @@ enable_pin: !PA6
microsteps: 64
rotation_distance: 8
endstop_pin: ^PD2
position_endstop: 0
position_max: 200
#[tmc2209 stepper_z]
#uart_pin: PA3
@ -74,12 +90,15 @@ endstop_pin: ^PD2
#run_current: 0.8
#stealthchop_threshold: 0
#[stepper_z1] #Decomment this when using dual Z motors.
#[stepper_z1] #Decomment this when using dual Z motors. Pins are the "E1" motor pins on the board.
#step_pin: PB10
#dir_pin: PB2
#enable_pin: !PB11
#microsteps: 64
#rotation_distance: 8
#position_endstop: 0
#position_max: 200
#[tmc2209 stepper_z1]
#uart_pin: PB1
#interpolate: True
@ -95,7 +114,7 @@ endstop_pin: ^PD2
[fan]
pin: PC8
[heater_fan]
[heater_fan Heatbreak_Fan]
pin:PC9
max_power:1
shutdown_speed:0
@ -103,3 +122,10 @@ shutdown_speed:0
[heater_bed]
heater_pin: PC7
sensor_pin: PC0
sensor_type: Generic 3950
control: pid #Run "PID_CALIBRATE HEATER=heater_bed TARGET=270" to calibrate flowing pid control values before print! They are just placeholders!
pid_Kp: 10
pid_Ki: 10
pid_Kd: 10
min_temp: 0
max_temp: 100