3D-printing/klipper
1
0
Fork 0
mirror of https://github.com/Klipper3d/klipper.git synced 2025-08-06 13:34:06 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 3

hall_filament_width_sensor: Added virtual runout sensor (#2535)

Browse source 
Signed-off-by: Denis Ignatenko deniss979@gmail.com
This commit is contained in:
Denis Ignatenko 2020-03-02 05:05:12 +02:00 • committed by GitHub
parent 26523d77ba
commit f84542cd20
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
3 changed files with 53 additions and 6 deletions
Download patch file Download diff file Expand all files Collapse all files

30
config/example-extras.cfg
View file

@ -1891,7 +1891,35 @@
#measurement_interval: 10
# The approximate distance (in mm) between sensor readings. The
# default is 10mm.
#Virtual filament_switch_sensor support. Create sensor named hall_filament_width_sensor.
#min_diameter:1.0
#Minimal diameter for trigger virtual filament_switch_sensor.
#Values from filament_switch_sensor.
#See [filament_switch_sensor] for a description of these parameters.
#pause_on_runout: True
# When set to True, a PAUSE will execute immediately after a runout
# is detected. Note that if pause_on_runout is False and the
# runout_gcode is omitted then runout detection is disabled. Default
# is True.
#runout_gcode:
# A list of G-Code commands to execute after a filament runout is
# detected. See docs/Command_Templates.md for G-Code format. If
# pause_on_runout is set to True this G-Code will run after the
# PAUSE is complete. The default is not to run any G-Code commands.
#insert_gcode:
# A list of G-Code commands to execute after a filament insert is
# detected. See docs/Command_Templates.md for G-Code format. The
# default is not to run any G-Code commands, which disables insert
# detection.
#event_delay: 3.0
# The minimum amount of time in seconds to delay between events.
# Events triggered during this time period will be silently
# ignored. The default is 3 seconds.
#pause_delay: 0.5
# The amount of time to delay, in seconds, between the pause command
# dispatch and execution of the runout_gcode. It may be useful to
# increase this delay if Octoprint exhibits strange pause behavior.
# Default is 0.5 seconds.
######################################################################
# Board specific hardware support