From e3e1548e2e8f444fe5d55b0c26d9f58ef20a0c0d Mon Sep 17 00:00:00 2001 From: Matias Canosa Date: Mon, 22 Sep 2025 02:13:46 -0300 Subject: [PATCH] config: fix whitespace issues in CR-10 Smart CR-FDM config Remove trailing spaces and add final newline to satisfy CI requirements. --- ...-creality-cr10-smart-cr-fdm-v2.5.s1-2022.cfg | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/config/printer-creality-cr10-smart-cr-fdm-v2.5.s1-2022.cfg b/config/printer-creality-cr10-smart-cr-fdm-v2.5.s1-2022.cfg index 4c9b26b62..b94698ba3 100644 --- a/config/printer-creality-cr10-smart-cr-fdm-v2.5.s1-2022.cfg +++ b/config/printer-creality-cr10-smart-cr-fdm-v2.5.s1-2022.cfg @@ -1,5 +1,5 @@ -# This file contains pin mappings for the Creality CR-10 Smart -# with a CR-FDM-v2.5.S1 mainboard (STM32F103RET6). +# This file contains pin mappings for the Creality CR-10 Smart +# with a CR-FDM-v2.5.S1 -100 mainboard (STM32F103RET6). # # Hardware architecture: # - Main board: STM32F103RET6 microcontroller @@ -7,7 +7,7 @@ # Connectors: 2x7 pin (14-pin) and 2x8 pin (16-pin) headers to main board # Communicates with main board via I2C/UART for strain gauge data # - This configuration uses physical Z endstop instead of strain gauge probe -# to free up communication pins and ensure reliable operation +# to ensure reliable operation # To use this config, during "make menuconfig" select the STM32F103 # with a "64KiB bootloader" and serial (on USART1 PA10/PA9) communication. @@ -73,7 +73,7 @@ pid_Kp: 22.865 pid_Ki: 1.292 pid_Kd: 101.178 min_temp: 0 -max_temp: 300 +max_temp: 300 [heater_bed] heater_pin: PB13 @@ -137,7 +137,7 @@ enable_force_move: True # Motors: PB3,PB4 (Z), PB5,PB6 (Y), PB7,PB8 (X), PB9,PC2 (E), PC3 (Enable) # Endstops: PC4 (X), PC5 (Y), PB2 (Z-physical) # Heaters: PB13 (Bed), PB14 (Hotend) -# Thermistors: PB0 (Bed), PB1 (Hotend) +# Thermistors: PB0 (Bed), PB1 (Hotend) # Fans/Outputs: PB15 (Part fan), PC13 (Lights), PA0 (Power) # Sensors: PA7 (Filament sensor) # Communication: PA9,PA10 (USART1 to host) @@ -147,7 +147,7 @@ enable_force_move: True # Pin 5: Fan/LED VCC, Pin 6: Layer Fan Signal, Pin 7: STM Pin 10, Pin 8: LED Signal # Pin 9-10: R11/R10 (TBD), Pin 11: VCC, Pin 12: GND, Pin 13: TH, Pin 14-16: HT-/HT+ # -# CONNECTOR 2 - 2x7 (14-pin) - MOTORS & ENDSTOPS: +# CONNECTOR 2 - 2x7 (14-pin) - MOTORS & ENDSTOPS: # Pin 1-2: Xd/Xb (X Motor), Pin 3-4: Ed/Eb (Extruder), Pin 5-6: X-/FilSensor # Pin 7-8: GND, Pin 9: FilRunout, Pin 10: X-, Pin 11-12: Ea/Ec, Pin 13-14: Xa/Xc # @@ -161,8 +161,6 @@ enable_force_move: True # STM32F103RET6 pins NOT identified in this configuration: # Available for future investigation or custom modifications: # PA1, PA2, PA3, PA6, PA8, PA11, PA12, PA15 -# PB0 (bed thermistor - could be repurposed if bed sensor moved) -# PB1 (hotend thermistor - could be repurposed if sensor moved) # PC0, PC1, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC14, PC15 # PD0, PD1 (if available on this package) # @@ -202,4 +200,5 @@ enable_force_move: True #horizontal_move_z: 5 #mesh_min: 10,10 #mesh_max: 290,290 -#probe_count: 6,6 \ No newline at end of file +#probe_count: 6,6 +