3D-printing/klipper
1
0
Fork 0
mirror of https://github.com/Klipper3d/klipper.git synced 2025-08-09 14:55:09 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 2

docs : make modifications to all md files to make them compatible with mkdocs

Browse source 
all markdown files must have a single H1 heading at the top.

Signed-off-by: Damien Martin <damlobster@gmail.com>

Update CNAME
This commit is contained in:
Damien 2021-07-22 00:40:40 +02:00 • committed by KevinOConnor
parent 7e88f9220c
commit cff61605fb
44 changed files with 565 additions and 536 deletions
Download patch file Download diff file Expand all files Collapse all files

16
docs/Slicers.md
View file

@ -1,14 +1,16 @@
# Slicers
This document provides some tips for configuring a "slicer"
application for use with Klipper. Common slicers used with Klipper are
Slic3r, Cura, Simplify3D, etc.
# Set the G-Code flavor to Marlin
## Set the G-Code flavor to Marlin
Many slicers have an option to configure the "G-Code flavor". The
default is frequently "Marlin" and that works well with Klipper. The
"Smoothieware" setting also works well with Klipper.
# Klipper gcode_macro
## Klipper gcode_macro
Slicers will often allow one to configure "Start G-Code" and "End
G-Code" sequences. It is often convenient to define custom macros in
@ -24,7 +26,7 @@ START_PRINT and END_PRINT macros.
See the [config reference](Config_Reference.md#gcode_macro) for
details on defining a gcode_macro.
# Large retraction settings may require tuning Klipper
## Large retraction settings may require tuning Klipper
The maximum speed and acceleration of retraction moves are controlled
in Klipper by the `max_extrude_only_velocity` and
@ -39,7 +41,7 @@ finds the toolhead seems to "pause" during retraction and priming,
then consider explicitly defining `max_extrude_only_velocity` and
`max_extrude_only_accel` in the Klipper config file.
# Do not enable "coasting"
## Do not enable "coasting"
The "coasting" feature is likely to result in poor quality prints with
Klipper. Consider using Klipper's
@ -52,20 +54,20 @@ between moves. This is likely to make blobbing worse, not better.
In contrast, it is okay (and often helpful) to use a slicer's
"retract" setting, "wipe" setting, and/or "wipe on retract" setting.
# Do not use "extra restart distance" on Simplify3d
## Do not use "extra restart distance" on Simplify3d
This setting can cause dramatic changes to extrusion rates which can
trigger Klipper's maximum extrusion cross-section check. Consider
using Klipper's [pressure advance](Pressure_Advance.md) or the regular
Simplify3d retract setting instead.
# Disable "PreloadVE" on KISSlicer
## Disable "PreloadVE" on KISSlicer
If using KISSlicer slicing software then set "PreloadVE" to
zero. Consider using Klipper's [pressure advance](Pressure_Advance.md)
instead.
# Disable any "advanced extruder pressure" settings
## Disable any "advanced extruder pressure" settings
Some slicers advertise an "advanced extruder pressure" capability. It
is recommended to keep these options disabled when using Klipper as